|
| 1 | Dismentalling of B.O.E soling/Inter locking tiles Including Stacking of servicable material and disposal of unservicable material within a lead of 50m as per direction of EI/C (Labour only) (PWD SOR 2022-23, Chepter-20, Serial No.19 Item No. New) |
| 2 | Cartage of malva from site up to 8km distance including loading & uploading, T&P etc. requried for proper of work as direction by Engineer-In-Charge. (PWD SOR 2022-23, Chepter-3, Item no. 213a) |
| 3 | Class-150 (Non Modular) brick work in 1:4 cement and Coarse Fine sand mortar in foundation and plinth including supply of all materials, labour and T&P etc. required for proper completion of the work) (PWD SOR 2022-23 Chapter No-06 Item No. 6.1) |
| 4 | 12mm Cement plaster with cement mortar inproportion of 1:3 cement & coarse sand of single coat for interior plastering upto floor two level including internal rounded angles chamfers, and rounded angles not exceeding 80mm in girth and finished even and smooth (PWD SOR 2025-26 Chapter No-1 Item No. 13.9) |
| 5 | Grandular Sub-base with well Graded Material (Table 400.1) (A) By Mix in Place MethodConstruction of granular sub-base by providing well graded material, spreading in uniform layers wth motor grader on prepared surface, mixing by mix in place method with rotavator at OMC, and compacting with smooth wheelo roller to achieve the desired density. complete as per technical spercification clause-401 (As per Analysis) |
| 6 | Relaying of old 80 mm thick i-Shaped & zig-zag shaped inter locking tiles including 30 mm thick local sand base levelling and dressing of surface required level and slope, filling joints with local sand all complete.(As per Analysis of Rate) |
| 7 | Supply & Laying Precast Concrete blocks (interlocking tiles) of paving of thickness 80 mm (compressive strength not be less than 30 Mpa ) including 25mm thick local sand base levelling and dressing of surface to required level and slope, filling joints with local sand all complete work as specified in IS 15658:2006 . (PWD SOR 2025-26 Chapter No-12 SI No. 10 New Item) |
| 8 | Proving and laying cement concrete in 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) and curing complete, including cost of form work. (PWD SOR 2022-23 Chapter No-05 Item No. 4.1 spec. No. 4.1.3) |
| 9 | RCC work Providing and laying in position specified grade of reinforced cement concrete in Raft foundation, including the cost of centering, shuttering, finishing and excluding reinforcement - All work up to plinth level in :1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size) (PWD SOR 2022-23, Chepter-5, Item No. 5.1 ) |
| 10 | M.S or Iron work in plain work such as reinforced concrete or reinforced brick work (When not included in and an over all rates) brought to required shape as necessary of the work and including the supply of steel and its wastage bend, hooks and authorized over lapping shall be measured upto floor to level. .(As per Analysis) |
| 11 | M.S Speciefication Board including painting & writing |
| 12 | M.S Speciefication Board including painting & writing Please Enable Macros to View BoQ information |
