|
| 1 | 12 mm cement plaster of mix 1:4 (1 cement: 4 coarse sand) |
| 2 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade, Two or more coats on new work. |
| 3 | Applying priming coats with primer of approved brand and manufacture, having low VOC (Volatile Organic Compound ) content.With water thinnable cement primer on wall surface having VOC content less than 50 grams/litre. |
| 4 | Painting on G.S. sheet with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade: Old work (one or more coats). |
| 5 | Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade : One or more coats on old work. |
| 6 | Dismantling G.I. pipes (external work) including excavation and refilling trenches after taking out the pipes, manually/ by mechanical means including stacking of pipes within 50 metres lead as per direction of Engineer-in-charge : 15 mm to 40 mm nominal bore |
| 7 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply and all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer inCharge.Internal work - Exposed on wall15 mm nominal dia pipes |
| 8 | do- but 20 mm nominal outer dia Pipes |
| 9 | do- but 25 mm nominal outer dia Pipes |
| 10 | do- but 32 mm nominal outer dia Pipes |
| 11 | do- but 40 mm nominal outer dia Pipes |
| 12 | Providing and fixing G.I. pipes complete with G.I. fittings and clamps, including cutting and making good the walls etc. Internal work -Exposed on wall15 mm nominal dia pipes |
| 13 | do- but 20 mm nominal outer dia Pipes |
| 14 | do- but 25 mm nominal outer dia Pipes |
| 15 | do- but 32 mm nominal outer dia Pipes |
| 16 | do- but 40 mm nominal outer dia Pipes |
| 17 | do- but 50 mm nominal outer dia Pipes |
| 18 | Making connection of G.I. distribution branch with G.I. main of 25 to 40 mm nominal bore sizes by providing and fixing tee, including cutting and threading the pipe etc. complete |
| 19 | Providing and fixing ball valve (brass) for size 15 mm nominal bore of approved quality, High or low pressure, with plastic floats complete : |
| 20 | do- but 20 mm nominal bore |
| 21 | do- but 25 mm nominal bore |
| 22 | Providing and fixing G.I. Union in G.I. pipe for the size 15 mm nominal bore including cutting and threading the pipe and making long screws etc. complete (New work) : |
| 23 | do- but 20 mm nominal bore |
| 24 | do- but 25 mm nominal bore |
| 25 | do- but 32 mm nominal bore |
| 26 | do- but 40 mm nominal bore |
| 27 | do- but 50 mm nominal bore |
| 28 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. |
| 29 | Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931 : for the size 15 mm nominal bore making good the same complete, wherever required : |
| 30 | Providing and fixing C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms. for the size 15 mm nominal bore making good the same complete, wherever required : |
| 31 | Providing and fixing PTMT Ball cock of approved quality, colour and make complete with Epoxy coated aluminium rod with L.P./ H.P.H.D. plastic ball.15 mm nominal bore, 105 mm long, weighing not less than 138 gms. |
| 32 | do- but 20 mm nominal bore, 120 mm long, weighing not less than 198 gms. |
| 33 | do- but 25 mm nominal bore, 152mm long, weighing not less than 440 gms. |
| 34 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :1:2:4 (1 cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources) |
| 35 | Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. |
| 36 | SITC of ETC solar water heating system comprising of all glass ETC tube absorber. The inner layer of absorver shall be of solar selected absorbing coated tube, vacuum jacket, cover glass tube, getter and getter mirror surface as per IS 16543. The system shall have temperature guages, strainer, 2 nos water meters, suitable capacity cold and hot water tank, all MS structure for installation including suitable electric control panel complete with control and power wiring, necessary plumbing including piping for cold and hot water line between tank and solar water system, water heater and thermostat, including non return valve, float valve and othe valve etc as required. |
| 37 | 200 LPD |
| 38 | 500 LPD |
| 39 | Providing and fixing CPVC ball valve (Union Type) of approved quality, high or low pressure with plastic floats complete 20 mm nominal bor complete in all respect |
| 40 | Providing and fixing CPVC ball valve (Union Type) of approved quality, high or low pressure with plastic floats complete 25 mm nominal bor complete in all respect |
| 41 | Providing and fixing CPVC ball valve (Union Type) of approved quality, high or low pressure with plastic floats complete 32 mm nominal bor complete in all respect |
| 42 | Providing and fixing CPVC ball valve (Union Type) of approved quality, high or low pressure with plastic floats complete 40 mm nominal bor complete in all respect |
| 43 | SITC of Thermal Tubes or evacuated tube collectors (ETC) for Solar Water Heaters 47 X 1500 mm |
| 44 | Supply & fixing of Silicon Ring (58*1800) of Thermal Tubes or evacuated tube collectors (ETC) for Solar Water Heaters |
| 45 | Supply & fixing of Antirust Ring (58*1800) of Thermal Tubes or evacuated tube collectors (ETC) for Solar Water Heaters |
| 46 | Supply & fixing of Tube Holder (58*1800) of Thermal Tubes or evacuated tube collectors (ETC) for Solar Water Heaters |
| 47 | SITC of Solar Invertor 30 KW compatible with existing system.Make: Delta / Solaredge / Fronius / Goodwe |
| 48 | SITC of SPV Module 250 or Higher.Make: Tata[ PV Panel, TPM325 ( 325-W-F40-I) 1.2 M Size] |
| 49 | Supply and replacement of Air Release ValveMake:Rb/ Tbs/ Cimbrio/ Zoloto |
| 50 | Supply and replacement of Auto Air VentMake:Jindal star/ Jindal Hissar / Surya Prakash |
| 51 | Supply and replacement of Insulation with Rockwool of GI PipeMake: Shree rock/ LLOYD INSULATION/ Photon or as per approve by EIC |
| 52 | 20 NB |
| 53 | 25 NB |
| 54 | Supply and replacement of Insulation with Nitrial and 24 SWG Aluminium Cladding of GI PipeMake:Supreme/ Armflex/ Photon or as per approve by EIC |
| 55 | 32 NB |
| 56 | Supply and replacement of Aluminium Cladding ofGI Pipe Make:Jindal/ Hindalco/ Photon or as per approve by EIC |
| 57 | 20 NB |
| 58 | 25 NB |
| 59 | TIG/Argon Welding for leakage of Hot water Storage tank |
| 60 | Supply and fixing of CPVC Union 1 inch.Make: Astral/ Supreme/ Ashirwad/ Finolex/ Ajay FlowGuard/ Prince/ SFMC (ISI mark) |
| 61 | Supply and fixing of CPVC Union 1¼ inch. Make: Astral/ Supreme/ Ashirwad/ Finolex/ Ajay FlowGuard/ Prince/ SFMC (ISI mark) |
| 62 | Supply and fixing of CPVC Union 1½ inch. Make: Astral/ Supreme/ Ashirwad/ Finolex/ Ajay FlowGuard/ Prince/ SFMC (ISI mark) |
| 63 | Dismantling ofSWH Systemincluding loading unloading, piping , all accessories etcand store in safe place |
| 64 | Installation of SWH system at different locationincludingloading unloading, piping and all accessories etc |
| 65 | Dismental of SPV system including all accessories i.e. inverter, cable, cable tray etc and unloading the material and store in safe place |
| 66 | Installation and testing of SPV system at different location including all accessories i.e. inverter, cable, cable tray etc with loading and unloading |
| 67 | SITC of rewinding for 1 Hp pressure pump motor,submersible pump, openwell pump, multi stage verticle pump etc. |
