|
| 1 | Description and specification of items to the executed. |
| 2 | Item No. 112- Demolishing brick work manually including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge. In cement mortar. |
| 3 | Item No. 111- Demolishing cement concrete manually including disposal of material within 50 metres leads as per direction of Engineer - in - charge. Nominal concrete 1:3:6 or richer mix. |
| 4 | Item No. 110- Earth work in excavation by manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. All kinds of soil. |
| 5 | Item No. 109- Extra for every additional lift of 1.5 m or part thereof in excavation/ banking excavated or stacked materials. All Kinds of soil. |
| 6 | Item No. 108- Providing and laying in position plain cement concrete (PCC) of specified grade excluding the cost of cantering and shuttering - All work up to plinth level : 1:1½:3 (1 Cement: 1½ coarse sand (zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources). |
| 7 | Item No. 107- Providing and laying in position specified grade of reinforced cement concrete (RCC), excluding the cost of cantering, shuttering, finishing and reinforcement – All work up to plinth level: 1:1.5:3 (1 cement : 1.5 coarse sand (zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size de rived from natural sources). |
| 8 | Item No. 106- Providing and laying in position specified grade of reinforced cement concrete (RCC), excluding the cost of cantering, shuttering, finishing and reinforcement – All work above plinth level up to 4 metre height, excluding cost of centering, shuttering, finishing and reinforcement: 1:1.5:3 (1 cement : 1.5 coarse sand (zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources). |
| 9 | Item No. 105- Cantering and shuttering including strutting, propping etc. and removal of form work for: Foundations, footings, bases for columns, etc. |
| 10 | Item No. 104- Cantering and shuttering including strutting, propping etc. and removal of form for Tie Beams, Plinth Beams, Roof Beam, Coping, etc. |
| 11 | Item No. 103- Cantering and shuttering including strutting, propping etc. and removal of form for Columns, Pillars, Posts and Strut, etc. |
| 12 | Item No. 102- Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete below plinth level and up to 2 meters height above plinth level. Thermo-Mechanically Treated bars of grade Fe-500D or more. |
| 13 | Item No. 101- Smooth finishing of the exposed surface of R.C.C. work (Beams and Columns) with 6 mm thick cement mortar 1:3 (1 Cement : 3 fine sand). |
| 14 | Item No. 100- Brick work with common burnt clay F.P.S. (non modular) 1st class bricks in sub structure (foundation and plinth) upto plinth level, in: Cement mortar 1:4 (1 cement : 4 coarse sand). |
| 15 | Item No. 99- Brick work with common burnt clay F.P.S. (non modular) 1st class bricks in superstructure above plinth level and up to 1st Floor Level (upto 4 m height), in all shapes and sizes in: Cement mortar 1:4 (1 cement : 4 coarse sand). |
| 16 | Item No. 98- Half brick masonry with common burnt clay F.P.S. (non modular) First Class Bricks in superstructure above plinth level up to 1st Floor Level (upto 4 m height), in: Cement mortar 1:3 (1 cement :3 coarse sand). |
| 17 | Item No. 97- Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m. |
| 18 | Item No. 96- Fabrication, supply, and installation of two (2 nos) structural gates, including frames, made from various Galvanized Iron (GI) sections, such as pipes, flats, and hollow sections. All members shall be cut, prepared, and welded according to the approved designs and specifications. CNC cutting is required for specific ornamental fittings at the ridge and mid-span, featuring a Buddhist cultural theme. After fabrication, all steel surfaces shall be cleaned and prepared for painting. A priming coat of an approved steel primer will be applied to all surfaces before final finishing. The gates, including built-up sections and miscellaneous fittings, shall be properly hoisted, fixed, and secured in their designated positions. (Dimensions: Main Gate: One (1 no) gate with a clear span of 3.0 meters x 2.0 meters. Side Gate: One (1 no) gate with a clear span of 1.2 meters x 2.0 meters. The combined weight of the gates shall be approximately upto 800 kilograms.) All work must be executed as per the enclosed identical drawings and detailed specifications, subject to approval by the competent authority. |
| 19 | Item No. 95- Fabrication and supplying of welded MS grills for fencing, intended for erection on a boundary wall. All framed work and grills shall be fabricated using mild steel sections, including flats, solid bars, and angles, conforming to IS 2062 Grade A or equivalent standard. Materials for fabrication will be as per the existing design and site specifications. The grills and framed work shall be fabricated by welding in accordance with approved workshop drawings. The weight of the completed grills shall be approximately upto 11 kg per meter length. After fabrication, all exposed steel surfaces shall be thoroughly cleaned and prepared. A priming coat of an approved steel primer shall be applied before final finishing and handover. Fabrication work shall be in strict accordance with the approved identical drawing referenced in the tender document. |
| 20 | Item No. 94- Hoisting, fixing, and securely welding prefabricated mild steel grills into position on the boundary wall, with installation executed as per the existing design and specifications. Grills for spans up to 3.0 meters and heights up to 1.0 meter. Grooves shall be accurately cut into the structural columns to receive the grill frame. The grills shall be fixed into position using necessary fixing materials, including hinges where required. Following installation, the grills shall be securely welded to the columns, with all welding carried out according to best industry practices. All damages to the boundary wall resulting from the installation process shall be mended. This includes the use of necessary materials such as cement, sand, and aggregates to match the existing finish. All welding areas shall be cleaned and prepared, followed by the application of a priming coat of an approved steel primer. The quoted rate shall include all labor, welding charges, and fixing materials required to complete the installation and make good all damages. |
| 21 | Item No. 93- Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works. |
| 22 | Item No. 92- Removing priming coat paint, synthetic enamel paint and the like from steel surface by scrapping, sand papering and preparing the surface smooth for application of paint. |
| 23 | Item No. 91- Applying priming coat: With ready mixed red oxide zinc chromate primer of approved brand and manufacture on steel works. |
| 24 | Item No. 90- Painting with synthetic enamel paint of approved brand and manufacture to give an even shade : One or more coats. |
| 25 | Item No. 89- Providing and fixing stainless steel (Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of the floor with suitable arrangement, reference to the approved identical drawing as enclosed and as per approval of the competent authority. |
| 26 | Item No. 88- Dismantling old plaster or skirting, raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead. |
| 27 | Item No. 87- Cement Plaster (In Coarse Sand): 15 mm cement plaster on rough side of single or half brick wall of mix: 1:4 (1 cement: 4 coarse sand) |
| 28 | Item No. 86- Cement Plaster (In Coarse Sand): 20 mm cement plaster of mix : 1:4 (1 cement: 4 coarse sand). |
| 29 | Item No. 85- Cement Plaster (In Coarse Sand): 12 mm cement plaster of mix : 1:4 (1 cement: 4 coarse sand) |
| 30 | Item No. 84- Cement Plaster (In Coarse Sand): 6 mm cement plaster of mix : 1:3 (1 cement : 3 fine sand) |
| 31 | Item No. 83- Cement Plaster (In Coarse Sand): 6 mm cement plaster of mix : Neat cement punning. |
| 32 | Item No. 82- Erection and dismantling of single scaffolding system upto 5 metre height, above ground level as per requirement of site, made with bamboo, placed upto a span of 1.2 metre, centre to centre, knotting the horizontal and vertical joints using coir string including provision for working platform as per requirement and maintaining it in serviceable condition for execution of conservation works and removing thereafter. The scaffolding shall be stiffened with bracings, runners, connecting with building structure, etc. wherever required, if feasible, for inspection of work at required locations with essential safety features for the workmen including cost of materials, labours, tools & plants etc., all complete, as per the direction of site-engineer. |
| 33 | Item No. 81- Wall Paint with acrylic emulsion paint, having VOC (Volatile Organic Compound) content less than 50 grams / litre, of approved brand and manufacture, including applying additional coat wherever required, to achieve even shade and colour. Two Coats. |
| 34 | Item No. 80- Providing and applying white cement-based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. |
| 35 | Item No. 79- Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade: New work (two or more coats) over and including water thinnable priming coat with cement primer. |
| 36 | Item No. 78- Stitching crack in brick masonry of boundary wall by carefully cutting outer face of brick by 125 mm deep into the wall, cleaning the gap and filling up the same with brick in cement mortar (1 Cement : 3 fine sand) including mending damages and finishing the surface to match with adjacent areas complete as per the direction of site in charge. |
| 37 | Item No. 77- Brick on end edging by vertically laying of Burnt Clay Brick of Class Designation 7.5 (Size: 250mm x 125mm x 75mm) along the pathway and appron edges including earthwork excavation, charges for filling gaps with cement mortar, backfilling in both side of edges, compacting the earth at both edges and removing rubbish with in a lead of 50 metre, as per direction of site-in-charge. |
| 38 | Item No. 76- Supplying and spreading morum soil uniformly in pathway of 100 mm thick including cleaning and dressing the ground level with removing debris, rubbish to dumping ground all complete. |
| 39 | Item No. 75- Supplying, fitting & fixing of 16-gauge Stainless Steel (Grade 304) frame for information board, stand at both side is to be made of 50 mm dia Stainless Steel (Grade 304) Pipe of height 2.40 m and frame border for back support is to be made of 25 mm square hollow bar along the edges (Size: 0.90 M X 0.75 M) including fixing in ground with necessary cement concrete (1:2:4), brick work, plaster with a floating coat of neat cement finish, all complete, as per the approved design.(Note: Charges for engraving/ etching write up/ notice in 16 gauge Stainless Steel (Grade 304) sheet along with supplying and fixing the Stainless-Steel sheet on the frame structure is not included in this item and should be paid separately). |
| 40 | Item No. 74- Charges for engraving/ etching write up/ notice in the 18 gauge Stainless Steel (Grade 304) Sheet (Size: 0.90 M X 0.75 M) and fixing the Sheet on the available frame structure including carriage to site, all complete, as per the approved design. (Note: Writeup to be collected from department). |
| 41 | Item No. 73- The construction of a complete masonry bench, including the brick legs, reinforced cement concrete (RCC) top slab, and sandstone veneering, finished and fixed securely in its designated position. Construction of legs using Burnt Clay Brick Masonry of Class Designation 7.5, with brick dimensions of 250mm x 125mm x 75mm. All brickwork shall be laid in cement mortar as specified by the competent authority. Casting and installation of a precast or cast-in-situ RCC slab, measuring 1.5m x 0.45m, to form the seating area. The top surface of the RCC slab shall be finished with a 30mm thick sandstone veneering of a suitable color, as approved by the Engineer-in-Charge. Fixing of the sandstone veneer shall be completed with necessary adhesive or mortar. The completed bench units shall be installed at the site, securely fixed using cement concrete and other materials as directed by the competent authority. |
| 42 | Item No. 72- Supplying and fixing pole mounted swinging stainless steel dustbin at site and fixing with necessary cement concrete (1:2:4), plaster with a floating coat of neat cement and other fitting & fixtures all complete, including all other charges as per direction of Site-in-charge. (Material: SS 202 Grade, Capacity: 40 Litres. Weight: 40Kgs. Dimension: 14 x 28 Inch). |
| 43 | Item No. 71- Providing and fixing Fibber Glass Reinforced plastic (FRP) Door Frames of cross-section 90 mm x 45 mm having single rebate of 32mm x 15mm to receive shutter of 30mm thickness. The laminate shall be moulded with fire resistant grade unsaturated polyester resin and chopped mat. Door frame laminate shall be 2mm thick and shall be filled with suitable wooden block in all the three legs. The frame shall be covered with fibber glass from all sides. M.S. stay shall be provided at the bottom to steady the frame. |
| 44 | Item No. 70- Providing and fixing to existing door frames. 30 mm thick Fiberglass Reinforced Plastic (F.R.P.) flush door shutter in different plain and wood finish made with fire retardant grade unsaturated polyester resin, moulded to 3 mm thick FRP laminate all around, with suitable wooden blocks inside at required places for fixing of fittings and polyurethane foam (PUF)/Polystyrene foam to be used as filler material throughout the hollow panel, casted monolithically with testing parameters of F.R.P. laminate conforming to table - 3 of IS: 14856, complete as per direction of Engineer-in-charge. |
| 45 | Item No. 69- Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid doors/ windows and other Frames/ Chowkhats comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non-toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modulus of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixed in position with M.S hold fast/lugs/SS dash fasteners of required dia and length complete as per direction of Site- In-Charge. (M.S hold fast/ lugs or SS dash fasteners shall be paid for separately). Note: For WPC solid door/window frames, minus 5mm tolerance in dimensions i.e depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made.Frame size 45 x 85 mm. |
| 46 | Item No. 68- Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door and window shutter of required size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non-toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/ borer proof, water/ moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Site-In- Charge. (Note: Stainless steel butt hinges and necessary S.S screws shall be paid separately). 35 mm thick. |
| 47 | Item No. 67- Providing and fixing in position collapsible steel shutters with vertical channels 20x10x2 mm and braced with flat iron diagonals 20x5 mm size, with top and bottom rail of T-iron 40x40x6 mm, with 40 mm dia steel pulleys, complete with bolts, nuts, locking arrangement, stoppers, handles, including applying a priming coat of approved steel primer. |
| 48 | Item No. 66- Supplying and fixing different fittings/ fixtures of doors, in position complete, as per the direction of site in charge. [For Each Door: (A) Steel Butt hinges (100x85x5.5 mm): 4 Nos, (B) Steel Tower Bolts (Barrel Type, 250 x 10mm): 1 No, (C) Steel Door Aldrop/ Door Latch (250 mm): 1 No, (D) Steel Handle (100 mm): 1 No (E) MS Hold Fast: 10 Nos.] |
| 49 | Item No. 65- Supplying and fixing different fittings/ fixtures of windows, in position complete, as per the direction of site in charge. [For Each Window: (A) Steel Butt hinges (100x85x5.5 mm): 4 Nos, (B) Steel Tower Bolts (Barrel Type, 250 x 10mm): 2 Nos, (C) Steel Ring: 2 Nos (D) MS Hold Fast: 8 Nos.] |
| 50 | Item No. 64- Supply, Installation, Testing and Commissioning of both side openable double door (back & front), outdoor Type Feeder Pillar suitable for 415V, 3 Phase, 4 Wire 50 Hz AC supply system fabricated with CRCA sheet steel of 1.6 mm thick and 2 mm thick for slanted roof & gland plates with 400 mm long Leg & Base frame made of 40X40X6 mm MS Angle including powder coated paint in approved shade, Aluminium Alloy bus bars of 160A Capacity, connections, inter-connections with adequate size Aluminium bars, cables, connectors etc. along with necessary nuts and bolts, clamps, DMC/ SMC bus bar supports, with necessary M.S. channel, MS flat, door handle, godown lock, padlock, both side louvers, Aluminium danger plate on brick foundation, with PCC Base casting including excavation. Entire feeder pillar shall have a common GI earth bar, cable gland plates including all necessary accessories. |
| 51 | Item No. 63- Supplying & fixing of 30 W Street Post Light Outdoor Lamp (with protection class: IP 55) on MS Angle of suitable size & length along with all accessories including connection, testing, commissioning, etc. complete with 1Year Manufacturer Warranty on LED light. |
| 52 | Item No. 62- Supplying & fixing of 400 mm Wall Mounted Fan with full copper motor, Speed (RPM) 1300 and having Overload thermal protector and Pull Chain Control along with all accessories including connection, testing, commissioning, etc. complete with 1 Year Manufacturer Warranty. (Make: Bajaj/ Crompton/ Havells/ Orient.). |
| 53 | Item No. 61- Supplying & fixing of LED Tube light (4\" L) with Fittings, system wattage of 20 W along with all accessories including connection, testing, commissioning, etc. complete with 1 Year Manufacturer Warranty. (Make: Syska/ Philips/ Wipro/ Havells). |
| 54 | Item No. 60-Supplying & fixing of B22 LED Inverter Bulb with Fittings, system wattage of 9 W along with all accessories including connection, testing, commissioning, etc. complete with 1 Year Manufacturer Warranty. (Make: Syska/ Philips/ Wipro/ Bajaj.). |
| 55 | Item No. 59- Supplying & installation of 300 mm sweep Exhaust fan in the existing opening, including making good the damage, connection, testing, commissioning etc. as required including supply and fixing of Gravity Shutter to prevent entry of foreign objects like dust, bird, pets, etc. along with all accessories with 1 Year Manufacturer Warranty. (Make: Bajaj/ Crompton/ Havells/ Orient.). |
| 56 | Item No. 58- Supplying and fixing following size/ modules, GI box along with modular base & cover plate for modular switches in recess etc. as required.1 or 2 Module (75mm X 75mm). |
| 57 | Item No. 57- Supplying and fixing following size/ modules, GI box along with modular base & cover plate for modular switches in recess etc. as required.3 Module (100mm X 75mm). |
| 58 | Item No. 56- Supplying and fixing following size/ modules, GI box along with modular base & cover plate for modular switches in recess etc. as required.6 Module (200mm X 75mm). |
| 59 | Item No. 55- Supplying and fixing following size/ modules, GI box along with modular base & cover plate for modular switches in recess etc. as required.8 Module (200mm X 125mm). |
| 60 | Item No. 54- Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required. 5/6 amps switch. |
| 61 | Item No. 53- Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required. 15/16 A switch. |
| 62 | Item No. 52- Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required. 3 pin 5/6 A socket outlet. |
| 63 | Item No. 51- Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required. 6 pin 15/16 A socket outlet. |
| 64 | Item No. 50- Supplying and drawing following size of FRLS PVC insulated coper conductor, single core cable in the existing surface/ recessed steel/ PVC conduit asrequired. 3 X 1.5 sq. mm. |
| 65 | Item No. 49- Supplying and drawing following size of FRLS PVC insulated coper conductor, single core cable in the existing surface/ recessed steel/ PVC conduit asrequired. 3 X 2.5 sq. mm. |
| 66 | Item No. 48- Supplying and drawing following size of FRLS PVC insulated coper conductor, single core cable in the existing surface/ recessed steel/ PVC conduit asrequired. 3 X 4 sq. mm. |
| 67 | Item No. 47- Supplying and drawing following size of FRLS PVC insulated coper conductor, single core cable in the existing surface/ recessed steel/ PVC conduit asrequired. 3 X 6 sq. mm. |
| 68 | Item No. 46- Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface / recess including cutting the wall and making good of the same in case of recessed conduit: 32 mm. |
| 69 | Item No. 45- Supplying and fixing of following ways, horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 volts, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, power painted including earthing etc. as required. (But without MCB/RCCB/Insulator) 4 way (4 + 12), Double Door. (Make: L&T/ABB/Hager) |
| 70 | Item No. 44- Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, \"C\" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. Single Pole. |
| 71 | Item No. 43- Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, \"C\" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. Double Pole. |
| 72 | Item No. 42- Supplying and fixing following rating, four pole, 415 volts, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required. 63 Amps. (Make: L&T/ABB/Hanger.) |
| 73 | Item No. 41- Supplying and fixing MS Meter Box with Powder Coated of size 800 x 800 x 300 mm suitable for Single/Three Phase connection including concealed metal hinges, mounting screws fitted from inside, metal hardware for wire seal, adequate space for meter and cut-outs. The meter box must be Flameproof, Weatherproof, Waterproof and Shockproof in all respect. |
| 74 | Item No. 40- Supplying and fixing adequate size of heavy-duty HDPE pipe of 63 mm OD, having working pressure 4 kg/sq. cm. at depth of 450 mm below the ground including excavation & refilling the trench etc. all complete as required. |
| 75 | Item No. 39- Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete. Size of Tile 600x600 mm. (Make: Kajaria Ceramics Limited, Somany Ceramics, Orient Bell, Cera Sanitary Ware, Johnson Tiles, Nitco Limited, HSIL Hindware or similar reputed brand) |
| 76 | Item No. 38- Providing and laying Vitrified tiles in floor in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in all colours and shade, laid on 20 mm thick cement mortar 1:4 (1 cement: 4 coarse sand) jointing with grey cement slurry @3.3 kg/sqm including grouting the joints with white cement and matching pigments etc. The tiles must be cut with the zero chipping diamond cutter only. Laying of tiles will be done with the notch trowel, plier, wedge, clips of required thickness, levelling system and rubber mallet for placing the tiles gently and easily. Glazed Vitrified tiles Matt/Antiskid finish of size. Size of Tile 600 x 600 mm. (Make: Kajaria Ceramics Limited, Somany Ceramics, Orient Bell, Cera Sanitary Ware, Johnson Tiles, Nitco Limited, HSIL Hindware or similar reputed brand) |
| 77 | Item No. 37- Chequerred precast cement concrete tiles 22 mm thick in footpath & courtyard, jointed with neat cement slurry mixed with pigment to match the shade of tiles, including rubbing and cleaning etc. complete, on 20 mm thick bed of cement mortar 1:4 (1 cement: 4 coarse sand). Medium shade pigment using 50% white cement 50% Grey cement. |
| 78 | Item No. 36- Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade, complete. (Make: Kajaria Ceramics Limited, Somany Ceramics, Orient Bell, Cera Sanitary Ware, Johnson Tiles, Nitco Limited, HSIL Hindware or similar reputed brand) |
| 79 | Item No. 35- Providing and fixing white vitreous china extended wall mounting water closet of size 780x370x690 mm of approved shape including providing & fixing white vitreous china cistern with dual flush fitting, of flushing capacity 3 litre/ 6 litre (adjustable to 4 litre/ 8 litres), including seat cover, and cistern fittings, nuts, bolts and gasket etc. complete. |
| 80 | Item No. 34- Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430 mm x 260 mm x 350 mm or 340 mm x 410 mm x 265 mm sizes respectively. |
| 81 | Item No. 33- Providing and fixing white vitreous china wash basin including making all connections but excluding the cost of fittings: Flat back wash basin of size 550 mm x 400 mm. |
| 82 | Item No. 32- Providing and fixing CP Brass Waste Coupling of ISI slandered good quality and colour for wash basin and sink. |
| 83 | Item No. 31- Providing and fixing CP Brass 32mm size Bottle Trap of approved quality & make and as per the direction of Engineer-in-charge. |
| 84 | Item No. 30- Providing and fixing C.P. brass Single Lever Pillar Cock of ISI slandered good quality conforming to IS:8931: 15 mm nominal bore including Basin Mixer and 375mm Long Braided Hoses without Popup Waste. |
| 85 | Item No. 29- Providing and fixing of 15 mm brass body premium variety Chromium Plated finish two way bib tap with flange of not less than 500 grams weight with quarter turn spindle internal/ external threaded connection conforming to IS 8931. |
| 86 | Item No. 28- Providing and fixing health faucet (ABS boy) 15 mm nominal bore and premium quality including wall outlet with shower hook in round shape, easy flex tube 1 m long with Nuts etc. |
| 87 | Item No. 27- Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS:8931. 15 mm nominal bore. |
| 88 | Item No. 26- Providing and fixing uplasticised PVC connection pipe with brass unions : 45 cm length : 15 mm nominal bore. |
| 89 | Item No. 25- Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. Flexible pipe 32 mm dia. |
| 90 | Item No. 24- Providing and fixing 600x450 mm bevelled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete. |
| 91 | Item No. 23- Providing & fixing necessary sanitary fittings of ISI slandered good quality and colour which includes towel ring: 3 nos, soap disc: 3 nos, toilet paper holder: 3 nos, hooks: 3 nos, grating for floor trap: 7 nos, etc. as per requirement for washroom cum toilet including all charges complete as per direction of site-in-charge. |
| 92 | Item No. 22- Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS: 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. |
| 93 | Item No. 21- Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. External work: 20 mm nominal dia Pipes. |
| 94 | Item No. 20- Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. External work: 25 mm nominal dia Pipes. |
| 95 | Item No. 19- Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. External work: 32 mm nominal dia Pipes. |
| 96 | Item No. 18- Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. External work: 100 mm nominal dia Pipes. |
| 97 | Item No. 17- Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete: 25 mm nominal bore. |
| 98 | Item No. 16- Providing and fixing on wall face unplasticized Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10mm gap for thermal expansion, (i) Single socketed pipes. 75 mm diameter. |
| 99 | Item No. 15- Providing and fixing on wall face unplasticized – PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes: Coupler 75 mm |
| 100 | Item No. 14- Providing and fixing on wall face unplasticized – PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes: Bend 87.5° 75 mm. |
| 101 | Item No. 13- Providing and fixing unplasticised -PVC pipe clips of approved design to unplasticised - PVC rain water pipes by means of 50x50x50 mm hard wood plugs, screwed with M.S. screws of required length, including cutting brick work and fixing with same mortar and making good the wall etc. complete: 75 mm. |
| 102 | Item No. 12- Making soak pit of 1.5 metre diameter at Top to 0.75 metre diameter at bottom level and 2.5 metre deep with 45 x 45 cm dry brick honey comb shaft with bricks and S.W. drain pipe of 100 mm diameter, 1.8 m long, complete as per standard design: with common burnt clay F.P.S. (non modular) first class bricks. |
| 103 | Item No. 11- Providing, laying and jointing glazed stoneware pipes class SP-1 with stiff mixture of cement mortar in the proportion of 1:1 (1 cement : 1 fine sand) including testing of joints etc. complete : 100 mm diameter. |
| 104 | Item No. 10- Providing and laying cement concrete 1:5:10 (1 cement : 5 coarse sand : 10 graded stone aggregate 40 mm nominal size) all-round S.W. pipes including bed concrete as per standard design : 100 mm diameter S.W. pipe. |
| 105 | Item No. 9- Providing and fixing soil, waste and vent pipes : 100 mm dia Centrifugally cast (spun) iron socket & spigot (S&S) pipe as per IS: 3989. |
| 106 | Item No. 8- Supplying Stainless Steel round shape pedal Dustbin of 12 Liters capacity (Size: 10 inch outer dia and 14 inch outer height) along with plastic bucket and lid. |
| 107 | Item No. 7- Supplying, installation and commissioning of ISI standard Stainless Steel Water Cooler and Dispenser with inbuilt UV and RO purifier 60/80 (Cooling Capacity: 60LPH and Storage Capacity: 80L), including wiring charges, all complete with manufacturer warranty of 1 year. (Make: Bluestar, Voltas, Eureka Forbes). |
| 108 | Item No. 6- Supplying and installing submersible water pump of 2 HP (3 phase, 415 volt) in a boring depth of 90 metre with all required accessories including all charges, like charges for plumber, electrician, mason, helper, etc. with tools and tackles, charges for drilling bore, supplying fixing of suitable pipe in bore, all complete. (The scope of work includes setting of drilling rig at specified location, drilling of 300 mm dia bore through all kinds of formations using rotary/ DTH drilling rig - of 90 meters depth, excavation of a pit for water circulation 2.5m x 1.5m x 1.5m - 1 No, disposal of muck and bentonite sludge, supply, installation and commissioning of PVC pipe including sockets of standard design, supply, installation and commissioning of all necessary tube-well fittings and bail plug with hook, MS housing clamp, well cap, sanitary sealing of well at top etc. in all respect – 1 No, shrouding with sea gravel of size 2 to 6 mm - 3 Cum, supply, installation and commissioning of submersible pump motor set of approved make suitable for tube well of 2 HP - 1 Nos, Panel board, etc., all complete). |
| 109 | Item No. 5- Providing and fixing 6Kg ABC (net powder weight) powder stored pressure type fire extinguisher consisting of welded Cylinder, Squeeze lever discharge Valve fitted with pressure indicating gauge with internal discharge tube, discharge hose and nozzle, suspension bracket, conforming to IS :15683-2006 with latest amendments duly charge with ISI marked mono ammonium phosphate base ABC powder conforming to IS : 14609 and pressurised with Nitrogen Gas suitable for operating between (-) 30 degree Celsius to (+) 55 degree Celsius etc. on wall as required. (ISI Marked) (Manufacturer Test Certificate to be provided at the time of delivery). |
| 110 | Item No. 4- Surface dressing of the ground including removing vegetation and inequalities not exceeding 15 cm deep and disposal of rubbish, lead up to 50 m and lift up to 1.5 m. All kinds of soil. |
| 111 | Item No.3- Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials bymechanical means, including loading, transporting,unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved. |
| 112 | Item No. 2- Procurement of materials as required during execution of work. [Details of Articles: Purchasing of Umbrella (Good Quality) - 5 Nos, Purchasing of Gum Boot (Good Quality) - 5 Pair, Purchasing of PVC Safety Helmet (Good Quality) - 5 Nos, Safety Belt - Full Body Harness (ISI Marked, Good Quality) - 2 Nos, Hand Gloves in Pair (Good Quality) - 10 Nos, Purchasing of Torch Light (Good Quality) - 2 Nos, Purchasing of 1.5v Battery for torch (Good Quality) - 5 Pair, Water Dispenser Jar (Good Quality, 10 Ltr) - 2 Nos, Flexible PVC Water Pipe (3/4\" dia, 100ft / Bundle, Good Quality) - 2 Nos, Tarpaulin Sheet (Size: 21’ X 15’, Good Quality) - 2 Nos] |
