|
| 1 | Carrying out the repairing/restoration of damaged fountain by way of removing damaged parts viz. nozzels,lamps, cables, cleaning of muck/ Slit, restoration of distribution pannel by way of replacing the damaged MCB\"s, contactors etc,cabling,water proof lights,nozzels, rubber pipe, and other allied accessories, tightning of all nuts and bolts, meggring, and testing after making all necessary connections. complete job. |
| 2 | Supply, Installation, Testing and Commissioning of 5 HP, 3-Phase Open Well Submersible Pump Set along with filter net for fountain, suitable for operation on 415 ± 10% V, 50 Hz AC supply, complete with motor, pump, base frame, delivery pipe, non-return valve, sluice valve, control panel with suitable starter, ammeter, voltmeter, and all necessary accessories.The pump shall be of horizontal open-well submersible type, with dynamically balanced impellers and stainless steel shaft, capable of delivering the required discharge at the specified head. The pump set shall be complete with flexible cable, suction and delivery connections, and other fittings as required for efficient operation.Commissioning and demonstration of satisfactory operation.Submission of test certificates and O&M manual.All civil, mechanical, and electrical works required to make the system functional shall be included in the contractor’s scope.Make: Crompton / Kirloskar / or equivalent approved by Engineer-in-Charge. |
| 3 | S/L , testing and commissioning of PVC insulated and PVC sheathed submersible copper cable 10 mm sq. 3 core 1100 volt grade Havel/Eq. standard make to be approved by EIC. |
| 4 | Supply, installation, testing and commissioning of a PAIRE Infrared Sauna Jaguar/ Artiz/ Equivalent standard make, for single-person use, complete with all accessories, electrical fittings, safety devices, and control systems.Work includes delivery, site preparation, assembly, wiring, testing and demonstration to ensure full functionality in accordance with OEM standards. |
| 5 | Supply installation testing and commisioning of steam bath generator with all standard accessories and fittings.Supply and installation of digital control panel, steam outlet nozzle, and temperature sensor.Supply and laying of insulated copper steam pipe between generator and steam room.Installation of auto-drain valve, solenoid valve, and safety pressure relief assembly.Electrical connections from power distribution panel with proper earthing.Testing of generator, control system, and temperature sensors for proper functioning.Commissioning and demonstration of the complete system in presence of site engineer.Submission of OEM warranty and service documentation. |
| 6 | Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor (Polycab Green/ Fenolex/ Salzer/RR/eq. standard make as desired by engineer incharge ), single core cable in surface/ recessed (cutting the wall and making good the same in case of recessed conduit ) medium class PVC conduit as required. |
| 7 | (a) 2 X 1.5 sq. mm + 1 X 1.5 sq. mm earth wire |
| 8 | (d)2 X 6 sq. mm + 1 X 6 sq. mm earth wire |
| 9 | (f) 2 X 16 sq. mm + 1 X 6 sq. mm earth wire |
| 10 | Supplying and fixing of following sizes of medium class PVC conduit( Anchor/ Ravindra/ Eq. make)along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required, complete |
| 11 | Providing and fixing of 6-16mm Cu thimbles duly cramped at cable ends. |
| 12 | Supply installation testing and commissioning of 15- 18 W + LED Surface/recess, square or round Mounted light luminary fitting shape with minimum system lumen efficacy of 100 lm/W with Pressure Die cast Aluminium body, Heat Sink and P.F.>0.95 ,THD<10% ,CCT 5700K, CRI 80.The LED with Useful life of 50000 Hrs at L70, seperate driver, heat sink, earthing provision.. The Input voltage range shall be 150V to 270V .The Fixture should have In-built Surge Protection of 2kV. Certification:- LM79 & LM80 test report should be from govt approved In-house NABL lab/ government of India. The job includes AMC (reckoned from date of successful commissioning) of lighting fixtures for a period of Two years ,which includes replacement of fixtures of Philips/ Trulux /Wipro / eq. make. sample to be approved before installation.. |
| 13 | S/L , testing and commissioning of PVC XLPE insulated alluminium armoured cable 650 V/1100 V Grade as per IS 7098 (Part 1) 1988 with upto Date Amendments.Havell/Eq. standard make as directed by engineer incharge and making end termination with brass compression gland and aluminium lugs of required size. |
| 14 | b) 50 sq. mm 3.5 core |
| 15 | Supplying and laying of following size DWC HDPE pipe ISI marked along with all accessories like socket, bend, couplers etc. conforming to IS 14930, Part II complete with fitting and cutting the concrete path wherever required,jointing etc.direct in ground including excavation and refilling the trench ( with cement concrete to be paid seperately), making the surface level but excluding sand cushioning and protective covering etc., complete as required. |
| 16 | 63 mm dia (OD-63 mm & ID-51 mm nominal) |
| 17 | Providing of Chemical earthing as per IS standards by way of digging 2 mt. deep pit then embedding 2 meter copper bound G.I Earthing electrode , 80mm dia. connecting the plate with main control board by 10 SWG copper wire . Full thread brass nut and bolt and washers. Refilling of pit with chemical compound. |
| 18 | Engaging of highly skilled labour / Electrician/ IT Related personal for carrying out I.T repairs at site, Dismentling of old damaged materials like wires in scraps, fixtures switches-sockets, servicing of panels and allied works, complete as directed by the engineer at site and stacking and handing over to concerned department including carrying out repairing works etc. |
| 19 | Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board,( legrand/ Scheinider/Hager /Eq. standard make to be approved by EIC.) 240 V, on surface/ recess,complete with tinned copper bus bar, neutral bus bar, earth bar,din bar, interconnections, powder painted including earthing etc.as required. (But without MCB/RCCB/Isolator) |
| 20 | 4 way, Double door ( 12+4) |
| 21 | Supplying and fixing of following rating, 240/415 V, 10 kA, \"C\" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. legrand / Schinider/ L&T ./equivalent make as directed by engineer incharge. |
| 22 | a) 6-32 Amp SP MCB |
| 23 | b) 40-63amp DP MCB |
| 24 | c) 40-63amp TPN MCB |
| 25 | Design, Fabrication, Supplying, Installation, Testing and Commissioning of following panel, duly manufactured from CPRI approved manufacturer, made out of 2mm thick M.S. sheet steel , floor/wall mounted, vermin and dust proof, indoor type with suitable size of angle iron legs for grouting in the ground, with lockable type hinged doors, duly painted with provision for fixing of following switch gears, , Aluminium Bus Bar of various ratings after taking Derating factor into account, and other allied accessories etc. as required.( As per approved design,size may vary as per site requirement) |
| 26 | Providing and fixing of following protection equipments and other allied accessories including connections, inter connections, with suitable size of PVC insulated copper conductor cable including earthing etc. as required. |
| 27 | Normal INCOMING: |
| 28 | a)160A 4P MCCB 25 KA including spreader links including spreader links, icu=ics=100% ( Adjustable thermal and Adjustable magnetic release ) Legrand/ Shinider/Semiens/ABB /Eq. standard make to be approved by EIC.. |
| 29 | b) 4 No. of Aluminium Bus Bar of 300 Amp. |
| 30 | c)Digital meters and phase indicators -1 set. |
| 31 | OUTGOING: |
| 32 | c) 40-63amp DP MCB |
| 33 | c) 40-63amp TPN MCB |
| 34 | c) space for 12 way MCB\"s |
| 35 | S/I testing and comm. Of three phase 30 KVA 50HZ oil cooled(Transformer oil is to be provided with stabilizer conforming to IS 335,IEC296)) unbalanced type servo voltage stabilizer(A.E / Cosco/Chinar/ Electricfield /Eq. standard make to be approved by EIC.) having an input voltage ranging from 156V to 415 V ( phase to phase) and balanced output voltage of 415V, +/- 1%. ( Test certificate to be provided by the manufacturer) The unit incorporate: (To be monitored and checked by the concerned Electrical Division) |
| 36 | a) 0-500V moving iron type voltmeter with selector switch. |
| 37 | b) A three phase change over switch to read voltage on incoming and output side |
| 38 | c) indicating lights 6 No two numbers for each of the motorised units, one for lower limit and other for higher limit. |
| 39 | d) six push button control for movement operation of three motorised dimmer units two for each unit i.e one for raise operation and one for lower operation under the conditions of adjustment of auto/mannual selector switch (DPDT) |
| 40 | e) Single phase Preventer ( contactor Switch of required rating) Legrand make. |
| 41 | f) six potential meter resistance with lock meter two for each phase control, one for sensitivity and other for level control. |
| 42 | g) two sets of indication lamps three numbers each to indicate output and input indication |
| 43 | h) 20 % over load bearing capacity for one hour. Please Enable Macros to View BoQ information |
