|
| 1 | Earth work in surface excavationnot exceeding 30 cm in depthbut exceeding 1.5 m in width as well as 10 sqm on plan including getting out and disposal of excavated earth upto 50 m and lif upto 1.5 m, as directed by Engineer-in- Charge: |
| 2 | All kinds of soil |
| 3 | Earth work in excavation by mechanical means (Hydraulic excavator)/ manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m, as directed by Engineer-incharge. |
| 4 | All kinds of soil |
| 5 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : |
| 6 | 1:2:4 (1 cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources) |
| 7 | 1:5:10 (1 cement : 5 coarse sand (zone-III) derived from natural sources : 10 graded stone aggregate 40 mm nominal size derived from natural sources |
| 8 | Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in: |
| 9 | Cement mortar 1:6 (1 cement : 6 coarse sand) |
| 10 | Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. |
| 11 | Hot finished welded type tubes |
| 12 | Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required |
| 13 | In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works |
| 14 | Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-incharge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.). |
| 15 | 12 mm cement plaster of mix: |
| 16 | 1:6 (1 cement: 6 fine sand) |
| 17 | Finishing walls with ready mixed Premium acrylic emulsion paint (Company Depot Tinted) having VOC less than 50gm/litre and UV resistance as per IS 15489:2004.Alkali & fungal resistance, dirt resistance exterior paint of required shade with silicon additives. |
| 18 | New work (Two or more coats applied @ 1.43 ltr/10 sqm) over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm. |
| 19 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade |
| 20 | Two or more coats on new work |
| 21 | Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved. |
| 22 | Providing and fixing G.I. Chain link fabric fencing of required width in mesh size 50x50mm including strengthening with 2mm dia wire or nuts, bolts and washers as required complete as per the direction of Engineer Incharge |
| 23 | Made of G.I. Wire of dia. 4mm, PVC coated to achieve outer dia not less than 5mm in required colour and shade |
| 24 | Providing and laying 60mm thick factory made cement concrete interlocking paver block of M -35 grade made by block making machine with strong vibratory compaction and of approved size and design/ shape laid in required colour and pattern over and including 20-30mm thick compacted bed of course sand, filling the joints with fine sand etc. all complete as per the direction of Engineer-in-charge. |
| 25 | With ordinary Grey Cement paver Block |
| 26 | With colour in ordinary Grey Cement paver Block |
| 27 | Providing and fixing2 mm thickpolycarbonate sheet , weather and UV resistant ,light transmission: up to 88% , excellent impact resistance: 250~300 times that of same thickness glass , fixed withpop rivets / nut & bolt onM.S. tublar frame complete in position as per drawing and to the entire satisfaction of Engineer-In-Charge. (M.S. frame work shall be paid extra) |
| 28 | Add difference of water charges @ 0.5% |
