Tender For Partitioning Of Medical Education Unit Hall At Main Campus Gmc Anantnag[Adv. Cost ? 20.74 Lacs (?17.58 Lacs Exclusive Of Gst + Gst@18% ? 3.16Lacs)], Anantnag-Jammu And Kashmir
TDR : 53151794
Tender Notice
BOQ
4 Days Left
Anantnag
Jammu And Kashmir
Tender For Partitioning Of Medical Education Unit Hall At Main Campus Gmc Anantnag[Adv. Cost ? 20.74 Lacs (?17.58 Lacs Exclusive Of Gst + Gst@18% ? 3.16Lacs)]
Name of Work:- Partitioning Of Medical Education Unit Hall At Main Campus Gmc Anantnag[Adv. Cost ₹ 20.74 Lacs (₹17.58 Lacs Exclusive Of Gst + Gst@18% ₹ 3.16Lacs)]
Sl. No.
Item Description
1
Providing and fixing aluminium work for doors, window ventilators and partitions with extruded built up standard tubular sections/ appropriate Z. sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixed with rawl plugs and screws or with fixing clips, or with expansion hold fastners including necessary filling up of gaps at junction at top bottom and sides with required PVC/neoprene felt etc. aluminium sections shall be smooth rust free, straight , mitred and jointed mechanically wherever required including cleat angle, aluminium snap beading for glazing/ panelling, C.P brass / stainless steel screws, all complete as per architectural drawings and the directionsl of Engineer in Charge (glazing and panelling to be paid for sepatately) Polyester powder coated aluminium (minimum thickness of polyester powder coated 50 microns)
2
For fixed portion Polyester powder coated aluminum (minimum thickness of polyester powder coated 50 microns)
3
For shutters of doors, windows & ventilators includingproviding and fixing hinges / pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately.)Polyester powder coated aluminum (minimum thickness of polyester powder coated 50 microns)
4
Providing and fixing 12mm thick prelaminated particle board flat pressed three layer or graded wood particle board (conforming to IS: 12823 Grade-I type-II) in panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of engineer-incharge.Pre-laminated particle board with decorative lamination on both sides.
5
Providing and fixing glazing in aluminum door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineerin- charge. (Cost of aluminum snap beading shall be paid in basic item.)With float glass panes of 5.0 mm thickness (weight not less than 12.50 kg / sqm)
6
Providing and fixing Aluminium fixtures aluminium sliding door bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour or shade with nuts and screws etc. complete
7
250 x 16mm
8
Providing and fixing aluminium tower bolts ISI marked (anodised anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour of shade with necessary screws etc complete:
9
250 x 10mm
10
150 x 10mm
11
Providing and fixing aluminium handles ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. complete.
12
125mm
13
100 mm Please Enable Macros to View BoQ information
We takes all possible care for accurate & authentic tender information, however Users
are requested to refer Original source of Tender Notice / Tender Document published by
Tender Issuing Agency before taking any call regarding this tender.
