|
| 1 | Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement : 3 coarse sand (zone-III) derived from natural sources : 6 graded stone aggregate 20 mm nominal size derived from natural sources) over 75mm thick bed of dry brick ballast 40 mm nominal size, well rammed and consolidated and grouted with fine sand, including necessary excavation, levelling & dressing & finishing the top smooth. |
| 2 | Providing and fixing eaves board made from 12mm thick 30 cm wide PVC board fixed with nuts and bolts etc. complete as facia board. |
| 3 | Providing & fixing in position 12mm thick PVC board for wall panelling by removing the existing damaged plywood wall panelling with necessary washers, nuts & bolts of requisite size. |
| 4 | Painting on G.S. sheet with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade : |
| 5 | Old work (one or more coats) |
| 6 | Providing corrugated G.S. sheet roofing including vertical / curved surface fixed with polymer coated J or L hooks, bolts and nuts 8 mm diameter with bitumen and G.I. limpet washers or with G.I. limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (up to any pitch in horizontal/ vertical or curved surfaces), excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. |
| 7 | 0.80 mm thick with zinc coating not less than 275 gm/m² |
| 8 | Structural steel work in single section, fixed with or without connecting plate, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. |
| 9 | Painting with black anti-corrosive bitumastic paint of approved brand and manufacture to give an even shade : |
| 10 | One or more coats on old work |
| 11 | Steel work welded in build up sections/framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using G.I. pipes etc. as required. |
| 12 | In posts, roofing, grating, frames, guard bar, ladder, railings, brackets, gates and similar works. |
| 13 | Providing and fixing pre-painted galvalume(PPGL) steel profile sheets AZ-150 of brand Tata Bluescope steel,Everest Industries Ltd.,JSW steel Ltd.,Jindal India Ltd., or equalavent (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm( + 5% )total coated thickness (TCT) with aluminiumzinc coating 150grams per sqm as per IS: 277 in 240mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches while transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling /self tapping aluminium screws (Xylan) of size (5.5x 55mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. |
| 14 | Providingandlayinginpositioncementconcreteof specified grade excluding the cost of centering and shuttering - All work up to plinth level : |
| 15 | 1:4:8 (1 Cement : 4 coarse sand (zone-Ill) derived from natural sources : 8 graded stone aggregate 40 mm nominal size derived from natural sources) |
| 16 | 1:2:4 (1 cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources) |
| 17 | Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate) finished with a floating coat of neat cement, including cement slurry, but excluding the cost of nosing of steps etc. complete. |
| 18 | 40 mm thick with 20 mm nominal size stone aggregate |
| 19 | Earthworkinexcavationbymechanicalmeans(Hydraulicexcavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and for all lift, as directed by Engineer-in-charge. |
| 20 | All kinds of soil |
| 21 | Centering and shuttering including strutting, propping etc. and removal of form work for: |
| 22 | Foundations, footings, bases for columns |
| 23 | Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with piano type switch, phenolic laminated sheet, suitable size M.S. box and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc. as required |
| 24 | a) Group-C |
| 25 | Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed PVC conduit as required |
| 26 | 2 X 1.5 sq. mm + 1 X 1.5 sq. mm earth wire |
| 27 | 2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire |
| 28 | 2 X 4 sq. mm + 1 X 4 sq. mm earth wire |
| 29 | Supplying and fixing metal box of 150mm X 75mm X 60mm deep (nominal size) on surface or in recess with suitable size of phenolic laminated sheet cover in front including providing and fixing 3 pin 5/6 A socket outlet and 5/6 A piano type switch, connections, painting etc. as required. |
| 30 | Supplying and fixing metal box of 180mm X 100mm X 60mm deep (nominal size) on surface or in recess with suitable size of phenolic laminated sheet cover in front including providing and fixing 6 pin 5/6 & 15/16 A socket outlet and 15/16 A piano type switch, connections, painting etc. as required |
| 31 | Supplying and fixing 3 pin, 5 amp ceiling rose on the existing junction box/ wooden block including connection etc as required |
| 32 | Supplying and fixing PVC batten/ angle holder including connection etc. as required. |
| 33 | Installation, testing and commissioning of ceiling fan, including wiring with the down rods of standard length (up to 30 cm) with 1.5 sq.mm FRLS PVC insulated, copper conductor, single core cable etc. as required. |
| 34 | Installation, testing, commissioning of wall bracket ceiling fittings of all sizes and shapes containing upto two GLS/CFL/LED lamps per fitting, complete with all accessories including connection etc. as required. |
| 35 | Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator) |
| 36 | b) 12 way , Double door |
| 37 | Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, 10 kA, “C” curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required |
| 38 | Single Pole |
| 39 | Supplying and fixing following rating, double pole, 240 V, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required |
| 40 | a)40 Amps |
| 41 | Providing and laying earth connection from earth electrode with 4.00 mm dia copper wire in 15 mm dia G.I. pipe from earth electrode including connection with copper thimble excavation and re-filling as required |
| 42 | Providing and fixing 4.00 mm dia copper wire on surface or in recess for loop earthing as required |
| 43 | Supplying ofDecorative ultra slim square profile LED 20 W 4 ft lighting fixture (similar to Philip 20 W LED Batten/Tubelight ultra compact 4ft) or its equivalent make Wipro, Crompton, Havells, Bajaj etc. |
| 44 | Supply of LED Bulb of 9 Watts B22 (Similar to Everday B22 Cool day light)or its equivalent to ISI specification make Panasonic, Havells, Bajaj, Crompton . |
| 45 | Supplying ofEnergy Saving 5 star rating, ISI, BLDC A.C. Ceiling fan 1200 mm sweep, with all accessories . (Similar to Polycab Eteri BLDC AC Ceiling Fan 1200 mm sweep ) or its equivalent make Havells, Crompton, Orient, Bajaj,etc. |
| 46 | Supplying of integrated LED 10 W Bulk head luminaire, (similar to Murphy 10W wall Lamp LED Oval Shape IP54 Water proof cool white or equvilantmake Havells, Halonix, Bajaj etc. |
| 47 | Supplying installation, testing and commissioning of ASHLOK make SEE brand safe earthing electro type-19, 50mm dia length 2 mtrs and inner space to be filled with crystaline conductive mixture including filling up with elelctrodite (Back fill compound ) as reqd for safe earth electrode and providing masonary enclusure with cover plate having locling arrangement etc as reqd. |
