|
| 1 | Dismantling of boarding in any description fixed in ny position with nails complete all as specifed and directed. |
| 2 | Demolition of cement concrete in ground floors and pavings n.exc 15cm thickness complete all as specifed and directed. |
| 3 | Dismantling of scantling 40 sqcm and over in section of any description complete all as specifed and directed. |
| 4 | S&F 40mm thick 2nd class hardwood wooden boarding for floors. Planed one side with butjoints and fixed with nails complete all as specifed and directed. |
| 5 | M&L for 2nd class hardwood clean swan scantling as in framed and fixed complete all as specified and directed. |
| 6 | Roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust, and Brushing neat cement slurry with 3.0kg of cement per sq. metre over and including 40mm thick PCC (1:2:4) type B-0 using 12.5mm graded stone aggregate as in flooring / pavingincluding finsihing the concerete surface even and smooth complete all as specifed and directed. |
| 7 | M&L for Badminton pole PU portable model minimum 50 kg each side professional moveable badminton pole/pro grade badminton pole set built for performance and precision net with whole assembly staging on both sides complete all as specifed and directed. |
| 8 | M&L for preparation of wood or wood based new surface with filler coat and finishing with 02 coats of synthetic varnishing complete all as spd and directed. |
| 9 | M&L painting lines, dashes n.exc 10cm wide for marking of badminton court complete all as specifed and directed. |
| 10 | S&F Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specifed and directed. |
| 11 | S&F Anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc complete all as specifed and directed. |
| 12 | S&F Anodised aluminium door shutters, aluminium section weighing 0.55 kg/ m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc complete all as specifed and directed. |
| 13 | S&F 12mm thickPrelaminated particle board, exterior grade, prelaminated one side with decorative choice lamination & otherside balancing white lamination, fixed with screws to timber frame work complete all as specifed and directed. |
| 14 | S&F 4.80mmSheet glass, selected quality and glazing with oil putty in squares exc 0.5 sq. m in each pane complete all as specifed and directed. |
| 15 | M&L for Steel work in tubular trusses, Purlin,Post etc including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161-1979 grade St.-240 complete all as specifed and directed. |
| 16 | M&L for Plates (plain or chequered)Channels, square of Fe 290 (Gde E-165) cut or notched (ordinary and counter sunk)formingholes, wihtou any attachement complete all as specifed and directed. |
| 17 | M&L formild steel screw bolts 11 to 15 mm (machine made) with hexagonal or squre heads at one end and screwedthe other, or screwed both ends, each scewed end to be fitted with washers and one hexagonal or squre nut, n.exc 5 cm long complete all as specifed and directed. |
| 18 | M&L for mild steel screw bolts 11 to 15 mm (machine made) with hexagonal or squre heads at one end and screwedthe other, or screwed both ends, each scewed end to be fitted with washers and one hexagonal or squre nut, exc 5 cm long & n.exc 10 cm long complete all as specifed and directed. |
| 19 | M&L for preparation of new steel surfaces of any description over 10 cm width or girth and applying two coat of synthetic enamel paint over primer redoxidecomplete all as specified and directed. |
| 20 | S&F for Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed and hung as gates, including pintle hinges, stops, hand-made sliding bolts, etc. framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specifed and directed. |
| 21 | Manufacturing, supplying and fixing retro reflective Overhead informatory road signage and boards, made up of 2 mm thick aluminium sheet, face to be fully covered with high intensity and encapsulated lens type heat activated retro reflective sheeting conforming to type - III of ASTMD-4956-01 as approved by Engineer-in-charge, letters, borders etc. as per IRC : 67-2001 in silver white with blue colour back ground and with high intensity grade, pasted on substrate by pressure sensitive adhesive backing which shall be activated by applying pressure conforming to class II of ASTM-D-4956-01 and fixing the same to the plate of structural frame work by means of suitable sized aluminium alloys, rivets or bolts & nuts @ 300 mm centre to centre all along the periphery as well as in two vertical rows along with theft resistant measures, including the cost of painting with two or more coats of epoxy paint in grey colour on the back side of aluminium sheet including appropriate priming coat. The rate includes the cost of rounding off the corners, lowering down the structuralframe work from the gantry, fixing and erecting the same in position all complete as per drawings complete all as specifed and directed. |
| 22 | Excavation in trenches, n .exc 1.5m wide and n.exc 1.5m in depth, for foundation, etc. or for shafts, wells, cesspits, manholes, per ,pier holes, etc. n.exc 10 sq m on plan and n. exc 1.5m in depth and getting out in any type of soil complete all as specifed and directed. |
| 23 | Returing , fillingin, including spreading, levelling, watering and well ramming in layers not exc 25cm. complete all as specifed and directed. |
| 24 | Removingexcavated material n. exc. 50m and depositingwhere directed at a level n exc. 1.5mabove the starting point complete all as specifed and directed. |
| 25 | M & L for submain wiring with FRLSH copper cable in concealed type 2x1.5 sqmm + 1x 1.5 sqmm earth wire drawn in PVC conduit and making good after completion of wiring complete all as specified and directed Note : Three run of sub main wiring cable alongwith one run of casing capping shall be measured as one unit length |
| 26 | Supply and fix heavy duty exhaust fan, steel body AC single Phase. 230V of size 450 mm sweep with, blades, and frame and louvers complete all as specified and directed. |
| 27 | M&L for making hole in PCC/brick wall/GI Sheet by cutting the surface to the suitable size to fix the exhaust fan and making good after fixing the fan complete all as specifed and directed. |
| 28 | S & F modular switch 6 Amps 1 way 1 module complete with metal fulsh boxand cover plate with frame complete all as specifed and directed.(Note : fixing arrangement of switch board by welding/clamping is included in the quoted rates) |
| 29 | Supply, laying and testing cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 10 sq mm 2 core complete all as specifed and directed. |
| 30 | Supply and laying of DWC (Double Wall corrugated) HDPE pipe ISI marked IS-14390 Part-ll, of outer dia 50mm and inner dia 38mm with smooth internal and profied external surface for non pressure under ground cable including all connected accessories like coupler \"O\" ring etc for protection of cable complete all as specifed and directed. |
| 31 | Supply and fixing amp rating 240V, 10KA \"C\" curve miniature circuit breaker (MCB) of single pole and nutural 32 Amps current carrying capacity in existing panel complete with connection testing and commissioning complete all as specifed and directed. |
| 32 | Supply and fixing LED flood light 120 watt 230 V AC outdoor type with thermal management in multiple optics and equipped with IP66 protection, with impact and corrosion resistant complete with driver and lamp complete all as specifed and directed. |
| 33 | S&F medium grade GI pipe bracket40mm bore of length not less than 1.20M, bent to shape and fixed to poles/ wall with two No MS flat clamps etc. duly painted with two coats of aluminium paint over a coat of zinc chrome primer complete all as specified and directed. |
| 34 | Supply and fix LT junction box for street light, sheet moulding compound (SMC) type with hinged type door and locking arrangement, off white colour, of size 130 x 180 x 77mm(internal)comprising 10 Amps MCB, 01 No bakelite base neutral link and 01 No earthing terminal bolt and nut and connecting up cables with aluminium terminal lugs incl fixing arrangements complete all as specifed and directed. |
| 35 | Supply and fixing PVC Insulated and FRLS Round Sheathed 2.5 Sqmm 2 Core Copper Conductor Heavy Duty Industrial Flexible Cables for Voltage Grade 1100 Volts conforming to IS: 694:2010 complete all as specifed and directed. |
| 36 | Supply and Fix PVC non metallic rigid conduit incl clamps and fictures of size 20mm dia complete all as specified and directed. |
| 37 | Supply and fix Decorative gate light made up of high grade unbreakable polycarbonate material suitable for 20 W LED lamp B22 base complete all as specified and directed |
| 38 | M & L for cutting existing steel tubing 40 or 50mm bore dia for alterations or additions done in positions without taking down complete all as specifed and directed. |
| 39 | Supply, laying and fixing of CPVC pipes 50mm bore outer dia SDR 11 & plain CPVC SDR 11 fittings in trenches complete all as specifed and directed. |
| 40 | All as per item No 39 above but pipe size 25mm outer dia fixed to walls, ceiling or in floors etc complete all as specifed and directed. |
| 41 | Supply and fixing Gun metal gate or globe valves with iron wheel head, screwed both ends for iron pipe and fixed in 50mm bore dia CPVC pipe complete all as specifed and directed. |
| 42 | All as per item No 41 above but size 25mm bore dia |
