|
| 1 | Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows fixing with butt hinges of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineer-in-charge. 35mm thick shutters Kiln seasoned and chemically treated wood.including carriage of materials in all leads and lifts and as per the direction of Engineer-in-Charge. |
| 2 | Providing and fixing wire gauge shutters using galvanized M.S. wire gauge of average width of aperture 1.4 mm in both directions with wire of dia 0.63 mm, for doors, windows and clerestory windows with hinges and necessary screws :Kiln seasoned and chemically treated hollock wood including carriage of materials in all leads and lifts and as per the direction of Engineer-in-Charge. |
| 3 | Providing mild steel/Tor Steel for R.C.C. work including bending, binding and placing in position complete. Mild steel and Medium Tensile steel bars including carriage of materials in all leads and lifts and as per the direction of Engineer-in-Charge.. |
| 4 | Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand) : 3 graded stone aggregate 20 mm nominal size).including carriage of materials in all leads and lifts and as per the direction of Engineer-in-Charge. |
| 5 | Providing and laying Virtrified tiles in different sizes with water absorption less than 0.08 % and conforming to I.S. 15622 of approved make, in all colours & shade, in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3, jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joint with white cement & matching pigments etc. complete. including carriage of materials in all leads and lifts and as per the direction of Engineer-in-Charge. |
| 6 | Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand), Jointing with grey cement slurry @ 3.3 kg/sqm including pointing the joints with white cement and matching pigment etc., complete and as per the direction of Engineer-in-Charge. |
| 7 | Finishing walls with 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade with silicon additives.New work (Two or more coats applied @ 1.43 litre/ 10 sqm. Over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm and as per the direction of Engineer-in-Charge. |
| 8 | Painting wood work with Deluxe Multi Surface Paint of required shade. Two or more coat applied @ 0.90 ltr/ 10 sqm over an under coat of primer applied @ 0.75 ltr / 10 sqm of approved brand and manufacture.and as per the direction of Engineer-in-Charge. |
| 9 | Finishing with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufactures specification: Painting Steel work with Deluxe Multi Surface paint to give an even shade. Two or more coat applied @ 0.90 ltr/ 10 sqm over an under coat of primer applied @ 0.80 ltr/ 10 sqm of approved brand and manufacture and as per the direction of Engineer-in-Charge. |
| 10 | Providing and placing on terrace polyethylene water storage tank, IS: 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank Complete and as per the direction of Engineer-in-Charge. including carriage of materials in all leads and lifts and as per the direction of Engineer-in-Charge. |
| 11 | Providing and fixing white vitreous china pedestal type water closet with seat and lid, 10 litre low level white vitreous china flushing cistern & C.P. flush bend with fittings 7 C.I. brackets, 40 mm flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete,including painting of fittings and brackets, cutting and making good the walls and floors wherever required: W.C. pan with ISI marked white solid plastic seat and lid. |
| 12 | providing and fixing kitchen sink with C.I. brackets, C.P. brass chain with rubber plug, 40mm C.P. brass waste complete, including painting the fitting and brackets, cutting and making good the walls wherever required: white glazed fire clay kitchen sink of size 600x450x250mm and as per the direction of Engineer-in-Charge. |
| 13 | Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS: 13592 Type A, including jointing with seal ring conforming to IS: 5382, leaving 10 mm gap for thermal expansion (i) Single socketed pipes. 110mm dia meter and as per the direction of Engineer-in-Charge. |
| 14 | Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931. 15mm nominal bore.and as per the direction of Engineer-in-Charge. |
| 15 | Providing and fixing aluminium sliding door bolts, ISI marked anodised (anodic coating not less than grade AC 10 as per ISI: 1868) 250x16 mm.and as per the direction of Engineer-in-Charge. |
| 16 | Providing and fixing aluminium tower bolts, ISI marked anodised (anodic coating not less than grade AC 10 as per ISI: 1868) (250x10 mm) transparent or dyed to required colour or shade, with necessary screws etc. complete |
| 17 | Providing and fixing aluminium handles floor door stopper, ISI marked anodised (anodic coating not less than grade Ac 10 as per Isi: 1868) 125mm transparent or dyed to required colour or shade, with necessary screws etc. complete and as per the direction of Engineer-in-Charge. |
| 18 | Providing and fixing aluminium extruded section body tubular type universal hydraulic door closer ( having brand logo with isi IS : 3564embossed on the body, door weight upto 36kg to 80kg and door width from 701mm to 1000 mm) with double speed adjustment with necessary accessories and screws etc.and as per the direction of Engineer-in-Charge. |
| 19 | Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require: White Vitreous China Wash basin size 630x450 mm with a single 15 mm C.P. brass pillar tap complete. |
| 20 | Providing anf fixing 600x450 mm beveled edge mirror of superior glass complete with 6mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete. |
| 21 | Repairs to plaster of thickness 12mm to 20mm in patches of area 2.5 sq meters and under including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground all complete as per direction of Engineer-In-Charge. With cement mortar 1:4 (1cement: 4 coarse sand) |
| 22 | Providing and applying ahite cement based putty of average thickness 1 mm, of approved brand and manufactuer, over the plasteres wall surface to prepare the surface even and smooth complete. |
| 23 | Renewing glass panes, with putty and nails wherever necessary including racking out the old putty. Float glass panes of nominal thickness 4mm.and as per the direction of Engineer-in-Charge. Please Enable Macros to View BoQ information |
