|
| 1 | Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622 of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1cement :4 coarse sand) including grouting the joints with white cement and matching pigments etc. complete.Size of tile 600x600 mm) |
| 2 | Demolishing cement concrete manually/by mechanical means including disposal of material within 50 meters lead as per direction of Engineer-incharge 1:4:8 or leaner mix (i/c equivalent design mix) |
| 3 | Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size) |
| 4 | Providing/fixing of 10 mm thick WPC(HARD WOOD) imported paneling for walls including cost of necessary frame work (12mm thick ply wood full base not jambs) fixed with necessary screws/nails,cornice beeding complete in all respects. |
| 5 | Providing and fixing 12 mm thick one side laminated ply, in ceiling with necessary nails etc including wood work in frames of false ceiling, partitions etc. sawn and fixed in position. |
| 6 | Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface. |
| 7 | Demolishing brick work manually/by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 meters lead as per direction of Engineer-in-charge:In cement mortar |
| 8 | Demolishing stone rubble masonry manually/by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 meters lead as per direction of Engineer-in-charge:In cement mortar including emoving mortar from and cleaning stones and concrete articles (net quantity of stacks of cleaned materials will be measured) |
| 9 | Random Rubble masonry with hard stone in foundation and plinth including leveling up with cement concrete 1:6:12 (1 Cement : 6 coarse sand : 12 graded stone aggregate 20mm nominal size) upto plinth level and curing complete with:Quarry |
| 10 | Random Rubble masonry with available hard stone in foundation and plinth including leveling up with cement concrete 1:6:12 (1 Cement : 6 coarse sand : 12 graded stone aggregate 20mm nominal size) upto plinth level and curing complete with:Quarry |
| 11 | Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) |
| 12 | Providing/Laying Stone soling Nallah hand packed on level in foundation trenches excluding carriages of Stones. |
| 13 | Dismantelling of steel work and chain link fencing including dismembering stacking serviceable material with in 50 m lead by labours. |
| 14 | Centering and shuttering including strutting, propping etc. and removal of form for :Foundations, footings, bases of columns etc. |
| 15 | Structural steel work in single section, fixed with or without connecting plate, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. |
| 16 | Providing and fixing precoated galvanised iron coloured High-Rib sheets (size, shape and colour as approved by Engineer-in-charge) 0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 100 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. |
| 17 | Carraige of by mechanical transport from source to site i/c loading unloading, taxes royalties etc: Sand for an average lead of 20 km |
| 18 | Carraige of by mechanical transport from source to site i/c loading unloading, taxes royalties etc: Coarse aggn rage lead of 20 km |
| 19 | Carraige of by mechanical transport from source to site i/c loading unloading, taxes royalties etc: Soling for an average lead of 15 km |
| 20 | Add provisions for signboard, Photographes and other unforseen items. Please Enable Macros to View BoQ information |
