|
| 1 | Dismantling and removing 2.5 cm thick artificaial stone flooring including stacking the useful materials for reuse and removing the debris away from work site with all leads and lifts as per direction of Engineer-in-charge. |
| 2 | Removing of cement plaster from walls including racking out joint to 12 mm deep and removing the debris away from work site with all leads and lifts as per direction of Engineer-in-charge. |
| 3 | Dismantling brick or stone masonry in lime or cement mortar under 3 mtr height including stacking the useful materials for reuse and removing the debris within 50mtr lead as per the direction of the Engineer-in-charge. |
| 4 | Earth work excavation for plinth & foundation in hard soil or gravelly soil within 50 mtrs. initial lead and 1.5 mtrs.initial lift including rough dressing and breaking clods to maximum 5cm to 7cm laying in layers not exceeding 0.30 mtrs in depth as per direction of Engineer-in-charge. |
| 5 | Supply & filling in foundation and plinth with sand watered and rammed including the cost, conveyance, royalty and labour charges etc. complete. |
| 6 | Cement concrete (1:3:6) with 4cm size hard granite metal including the cost, conveyance, royalty and labour charges etc.Complete. |
| 7 | Cement concrete (1:2:4) with 12mm size hard granite chips including the cost, conveyance, royalty and labour charges etc.Complete. |
| 8 | Fly Ash brick masonry in cement mortar (1:4) using fly ash brick having crushing strength not less than 75 Kg/Cm2 with dimensional tolerance of +/- 8% after immersing the bricks in water for six hours before using foundation and plinth including hoisting, placing in position, watering, curing to required time etc. including cost, converyance, royalties and cost of all labour with T & P required for the work etc. complete as per direction of Engineer-in-charge. |
| 9 | R.C.C. work of ( 1:1.5:3) with 12 mm & down grade black hard granite chips( crusher broken) including hoisting, lowering, laying and compacting concrete, watering and curing and finishing the exposed surface smooth, providing grooves or beds where necessary including cost of all materials (excluding cost of tor steel) and cost of all labour with T & P required as per direction of Engineer-in-charge. |
| 10 | Supplying, cutting, bending, binding and laying the grill of approved dia and placing in position of tor steel (Fe-500) for R.C.C. works and using binding wire 18 to 20 gauge including cost, conveyance and labour complete as per direction of Engineer-in-charge. |
| 11 | Rigid and smooth centering and shuttering for R C C works including false works and dismantling them after casting including cost of material complete for RCC floor and roof slabs, landings, balconies, projecting sunshades and chajjas up to 4.30 mtr height. |
| 12 | 20 mm thick cement plaster (1:4) admixed with 101-LW+ (Dr. Fixit) in finished smooth over the RCC Ceiling after cleaning the rebars by applying 204-rust remover (Dr. Fixit) and removal of all loose particles, applying a thick coat of neat cement slury admixed with 301- Universal Repair Product (Dr.Fixit) (1 part URP and 1.5 part OPC cement), watering for curing to required time, including cost, conveyance, royalties,cost of all labour with T & P required for the work complete etc. as per direction of Engineer-in-charge. |
| 13 | 16 mm thick cement plaster (1:6) after racking out the joints including watering, curing to required time, cost, conveyance, royalties, cost of all labour with T & P required for the work complete as per direction of Engineer-in-charge. |
| 14 | 12 mm thick cement plaster (1:4) over brick work with cement punning for skirting including watering, curing to required time, cost, conveyance, royalties, cost of all labour with T & P required for the work complete etc. as per direction of Engineer-in-charge. |
| 15 | Supplying, fitting and fixing polished vitrified tile of premium grade in floors of size 600mm x 600mm coloured / printed series (Homogeneous) of Kajaria/ Somani/Jhonson & Jhonson/AGL or equivalent make confirming to IS : 15622:2006 laid on 20mm thick cement mortar (1:4) (1 cement : 4 course sand) and filling joints with white cement of approved quality including cost of all materials, labour T&P etc required for the work all complete as per direction of Engineer-in-charge. |
| 16 | Providing & fixing 30cm x 45cm size special plain/printed series edge cut GLAZED TILES (wall tiles) of premium grade of Kajaria power line / Somany Digital N Glosstra / Asian impression / Johnson /RAK/Orient Bell or equivalent having thickness 6.5mm to 6.7mm conforming to IS 13753 of approved make & shade in Dadoes over 12mm thick cement plaster 1:3 (1 Cement: 3 Coarse sand) finished with modular pointing in white cement & pigment to match the shade of the tiles including cost, conveyance, loading, unloading, royalties and taxes of all materials, cost of all labour curing sundries and T & P etc. required for the work etc. complete as per specification and direction of Engineer-in-charge. |
| 17 | Fixing granite tiles of minimum 20mm thick above 0.40 sqm in floors, treads or steps and landing on 25mm thick bed of cement mortar 1:1 (1 cement : 1 sand) jointed with neat cement slurry mixed with pigment to mach the shades of the tiles including rubbing and polishing, forming nose complete. including cost of materials, conveyance, royalty, cost of labour with T & P required etc complete as per direction of Engineer-in-charge. |
| 18 | Supplying, fitting, fixing up three track Aluminium window (sliding type) made up powder coated aluminium Section 9778 as windows frame, section No 4095, 4096 and 9777, 3994 as shutter frame with 5mm thick black glass (I.S.I.) as panel fitted with rubber beading including locking arrangement including all fitting including cost of materials all taxes labour, T&P etc. complete as per direction of Engineer-in-charge including cost of S.S. wire Mesh |
| 19 | Fabricating, supplying & fixing M.S. gate/ Grill made of M.S. Square pipe, flat, square bar, C.R. sheet etc. of approved design and as per direction of E.I.C. |
| 20 | Supplying and fixing Pre-painted GCI sheet of 0.50mm thick in roof drilling hole in wind ties including fixing of ridges, valleys, wind ties etc. including cost of all materials, T&P, labour charges etc. complete. |
| 21 | Scraping old paint with scrapers, sand papering and washing with soap water or soda including scaffolding charges up to 8mtr height. |
| 22 | Finishing wall surface with cement based wall putty (water based) of approved make and finished smooth and even surface to receive painting including cost of scaffolding, staging charges with cost of all materials, labour, T&P etc. complete. |
| 23 | Priming one coat with any approved primer (water based) on Plastered surface after cleaning the surface, sand papering etc. including cost, conveyance, royalties, cost of all labour with T & P require for the work complete as per direction of Engineer-in-charge. |
| 24 | Wall painting two coats with Plastic emulsion paint of any approved shade over the interior surface of walls including cost, conveyance, royalties, cost of labour with T & P required for the work complete as per direction of Engineer-in-charge. |
| 25 | Priming one coat with any approved primer on Iron work including cost, conveyance, cost of all labour with T & P require for the work complete as per direction of Engineer-in-charge. |
| 26 | Painting two coats any approved shade of paint on iron/wood work including cost, conveyance, cost of all labour with T & P require for the work complete as per direction of Engineer-in-charge. |
| 27 | Providing and fixing on wall face unplasticised Rigid PVC soil, waste and rain water pipes of 110mm dia conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS: 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes |
| 28 | Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink with drain board 510 x 1040 mm bowl depth 250 mm as per IS 13983 with 40mm C.P. waste with PVC waste pipe, stainless steel plug 40 mm, including cutting and making good the walls wherever required. |
| 29 | 2.5 cm A.S.flooring with C.C.(1:2:4) including punning using 12 mm size H.G.chips and including cost of materials, conveyance, royalty, cost of labour with T & P required etc complete as per direction of Engineer-in-charge |
| 30 | Dismantling and removing doors, windows and ventilators including removal of frame, hinges, fastening an stacking the same for reuse and removing the debris within 50mtr lead and as per direction of Engineer-in-charge. |
| 31 | Dressed seasoned sal wood /WPC work framed and fixed (wrought and put up) in trusses, purlines, frames of doors, windows, ventilabours and beams. |
| 32 | Supplying and fixing W.L clamps 25cm to 30cm long of 35mm * 5mm size for doors and windows and ventilators including fixing in cement concrete (1:3:6) with 12mm to 20mm hard stone chips or in cement mortar (1:3) including cost of all materials. |
| 33 | Supply and fixing wash basins of size 550 x 400 mm with pedestal with Cast Iron or M S brackets painted white including cutting holes in walls and making good the damages etc all complete as per specification including cost of 15mm dia CP pillar cock, Semi Rigid PVC waste pipe for sink and wash basin 32 mm dia with length not less than 700 mm with PVC waste fittings, Unplasticised P.V.C. connection pipe with brass union 45 cm long 15mm bore, 32mm dia CP Brass waste etc. complete. |
| 34 | Supply and Fixing 600mm x 450mm bevelled edge mirror of superior glass mounted on 6mm thick A.C sheet or plywood sheet and fixed to wooden plugs with chromium plated brass screws and washers complete as per specification. |
| 35 | Fixing standard sized Chromium Plated brass towel rail complete with Chromium Plated brass brackets fixed to wooden plugs with Chromium Plated brass screws, complete as per specification. |
| 36 | Supplying all materials, labour, T&P and fitting and fixing CP Soap holder with supply of wooden plugs, CP screws and cement etc all complete as per PH specification. |
| 37 | Supplying and Fixing Wash Down Water Closet (European type W.C pan / IWC Pan) with integral ‘S’ or ‘P’ trap conforming to IS 2556 : Part 8-2004/ 580 mm x 440mm size white glazed Vitreous China Orissa Pattern squatting pan, to the floor with wooden plug and chromium plated screws including jointing the trap with soil pipe in cement mortar (1:1) etc all complete as per specification including cost of Seat and cover, seat cover, 10ltr capacity PVC Low Level flushing cistern with accessories and flush pipe etc. complete. |
| 38 | Supplying all materials, labour, T&P and fixing standard sized 15mm dia Angular Stop cock including cutting the wall and making good the damages, including cost of all materials complete as per PH specification and direction of Engineering-in-charge. |
| 39 | Supplying all materials, labour, T&P and fitting and fixing standard sized 15mm dia Long Body CP Bib cock/Sink cock including supply of all necessary jointing materials including cost, conveyance of all materials to work sites, payment of royalty and taxes etc. all complete. |
| 40 | Fixing standard sized glass-shelf with Chromium Plated brass brackets and guard rails complete, fixed to woden plugs with Chromium plated brass screw as per specification. |
| 41 | Fixing 15mm dia CP revbolving overhead rain shower with arm approved by the Engineer-In-Charge including polishing all complete as per specification. |
| 42 | Supplying all materials, labour, T&P and fitting and fixing standard sized 15mm dia concealed CP stop cock to be approved by the Engineer-In-Charge including supply of all necessary jointing materials including cost, conveyance of all materials to work sites, payment of royalty and taxes etc. all complete. |
| 43 | Providing and fixing on wall face unplasticised-PVC moulded fittings / accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion.(a)110mm dia bend |
| 44 | (b) Single tee with door 110 x110 x 110mm |
| 45 | Providing and fixing 35 mm thick factory made laminated veneer lumber door shutter conforming to IS : 14616 and TADS 15:2001 (Part B), fixing with butt hinges of required size with necessary screws, all complete as per directions of Engineer-in-charge and panelling with panels of : Note:- Butt hinges and necessary screws shall be paid separately), 12 mm thick pre-laminated particle board (decorative lamination on both sides) grade-1, medium density flat pressed, three layer particle board FPT- I or graded wood particle board FPT- I, conforming to IS : 3087, bonded with BWP type synthetic resin adhesive as per IS : 848 and pre-lainated conforming to IS : 12823, Grade 1, Type - II marked. |
| 46 | Providing and fixing of door Accessories complete as per direction of Engineer-in-Charge. (a) SS Aldrop (16 mm x 250 mm) with nut and bolts |
| 47 | (b) SS Tower bolt of 200 mm |
| 48 | (c ) SS Handel of 150 mm |
| 49 | (d) SS Hinges of 125 mm |
| 50 | (e ) SS Door Stopper |
| 51 | (f) S.S. Screw (35 x 8 mm) |
| 52 | (g) S.S. Screw (25 x 6 mm) |
| 53 | Fixing Multi Floor Trap (110mm dia) floor traps with plastic Jali of self cleaning design including cost of cutting and making good the walls and floors all complete as per specification. |
| 54 | Supply & fixing of 25mm dia S.S. curtain pipe for doors and windows including cutting to required size etc complete as per direction of Engineer-in-Charge. |
| 55 | Supply & fixing of S.S. clamp for 25mm dia S.S. curtain pipe for doors and windows including supply of required quantity of S.S. Screw, PVC plug etc complete as per direction of Engineer-in-Charge. |
| 56 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes conforming to IS:15778, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge. (a) 20 mm nominal outer dia pipes. Please Enable Macros to View BoQ information |