Sales : +91-777 804 8217
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 25-12-2025 | Corrigendum No 1 | Other | 30-12-2025 |
| Sl. No. | Item Description |
| 1 | SCHEDULE \"A\" Part-I (Building/Structures) (To be quoted by the tenderer) |
| 2 | Item No 01 A :Design Structurally and architecturally and construction of spectator gallery (size: 18m x 12m) complete and staircase (Area 28.56 Sqm) all specified in design basis report, drawings and tender documents. |
| 3 | Item No 01 B :Design Structurally and architecturally and construction of sanitary annex (size 28 Sqm) complete all specified in design basis report, drawings and tender documents.Note: the quoted rate consists following:(ab) 2 No WC(ab) 1 No IWC(ac) 2 no WHB)(ad) 2 No Urinal |
| 4 | Schedule \"A\" Part-II (Miscellaneous items of works) |
| 5 | Item No 01 : Supply and laying or fixing or passing in trenches/ on pole/ through pipes,1100 volts grade XLPEinsulated, screened PVC bedded, galvanised steel strip or wire armoured, heavy duty electric cable with stranded aluminium conductor conforming to IS 7908 / (PART-I) 1988 with the latest amendments includingjointing materials such as cable glands & lugs etc and testing on completion all as directed etc of the under mentioned type and sizes :- |
| 6 | (a) 16 sqmm x 4 core |
| 7 | (b)25 Sqmm x 3.5 core |
| 8 | Item No 02 : Supply and laying sand cushioning with dry and clean washed sand over and under the under ground cable in trenches, ducts for cable protection complete as specified & directed. Fumed thickness shall be measured. |
| 9 | Item No 03 : Supplying and laying unreinforced precast concrete cable cover, class LV Type 2 flat, size 300mm x 180mm x 40mm complete all as specified and directed as per IS 5820:1970, concrete grade should not be less than M-20, any breaking load loing |
| 10 | Item No 04 : M&L for PCC (1:4:8) type D2 using 40 mm graded stone aggregate as in foundation, filling, mass concrete andpilasters, buttresses columns, postsetc complete all as specified & directed. |
| 11 | Item No 05 : M&L for PCC (1:2:4) type B1 using 20 mm graded stone aggregate as in copings, kneelers, etc complete all as specified & directed. |
| 12 | Item No 06 : Supply, erection,commissioning and testing of outdoor type LT feeder pillar box, double door,suitable for 3 phase 4 wire, 415 volts AC supply and having 4 Nos aluminium bus bar rated for not less than 400 Amps mounted FRP insulatorsfor distribution system andCPRI approved and as per make given in CA , fabricated in factory having modern fabrication and testing facility which includestanks pre treatment facility comprising of de-greasing, rinsing, de-rusting, rinsing, phosphating, rinsing and passivation followed by powder coated paintingwith approved shade of RAL 7032.The feeder pillar shall be provided with suitable Neoprene rubber gasket to make it completely dust and vermin proof and degree of protection not less than IP-55 and general construction conforming to relevant IS. The feeder pillar shall be made out of 3.15mm thick CRCA mild steel sheetand 3.15mm thick gland plate duly compartmentalized for each control gear and bus-bar, front door (02 layer) and rear Door (01 layer) opening facility and 4 side slanting canopy type roof on top and mild steel channel (75 MC) base frame at bottom and having welded equal angle of 75mmx75mmx6mm of length 0.9mtr, 04 nos,30cm of of angle shall be embedded in PCC 1:2:4, 20mm graded stone agregate below GL level and 30cm shall be above ground level of size as directed by Engr-in-charge at site. The feeder pillar shall be provided with ventilation facility in the form of louvers for better heat dissipation.Necessary cable gland shall be provided for all incoming and outgoing cables. |
| 13 | CONTROL WIRING : All control wirings shall have to be carried out with 1100 volts rated FRLSH grade PVC insulated multi-stranded type copper wire of cross sectional area 2.50Sqmm and shall be properly bunched, tied and dressed, ferrule marked for proper identification and crimped with suitable size and type of tinned copper lugs and shall be wrapped with PVC spring type tube near the door hinges. Cable Alley : Necessary cable alley shall be provided for out going cables in both sides of LT panel with terminal block,the terminal block shall be connected with the outgoing MCCB/MCB with copper bas bar of suitable sizeINCOMING : 4 pole MCCB having breaking capacity 25 KA ,thermal magnetic release of rating 63Amps, 415 Volts, 50 Hz.- 01 No OUTGOINGS : (a) 4 pole MCCB having breaking capacity 10 KA 415 Volts of rating40 Amps.- 01 No (b) 4 Pole MCCB having breaking capacity 10 KA , 415 Volts of rating 32 Amps.- 03 NoMetering and Instrumentation (c) LED Pilot Lamp suitable for 230 Volts AC supply with integral circuit and cluster LED of following colours : (d) RED - 01 No, (ii) YELLOW - 01 No, (iii) BLUE - 01 No.(k) Digital volt meter 96mm x 96mm suitable to read 0 to 500 volts, accuracy class 1% - 01 Nos(l)Digital Ammeter 96mm x 96mm suitable to read 0 to 200Amps, accuracy class 1% - 01 Nos (n)02 Nos.Danger Notice Plate duly written in Signal Red colour.Note: Drawing should be approved by Engg in charge before placing the order, |
| 14 | Item No 07 : Supply and lay in trenches/under roads/crossings or fixed to wall/pole/roof, GI tubing light grade of following sizes for protection of UG cables including taking out of old u/s pipe :- |
| 15 | (A) 50 mm dia |
| 16 | (B) 40 mm dia |
| 17 | Item No 08 : Supply & fixing LED Post top lantern 40/45 watt light fitting made of cast aluminium spigot housing with decorativeacrylic diffuser with IP 65 rating protection complete with all accessories fixed on GI pipe 50 mm dia of specified length complete all as specified and directed by Engg in charge. |
| 18 | Item No 09 : Supply and fixing LED Solar street light fittings 36/40 Watt including galvanized steel pole , ISI marked, 6 mtr , in built, ,Lithium ion LiFePO4 battery,capacity 288Wh,monocrystalline solar panel, MPPT charge controller with dusk down sensor with all connected accessories like nuts bolts clamps etc complete all as directed. |
| 19 | Item No 10 : Taking out and refixingsolar street light fittings with pole completewith nuts ,bolts,clamps,etc all as specified and directed by engineer in charge. |
| 20 | Item No 11 : Dismantling & Taking outany type of electric concrete polesalong with all connected accessories by removing all electrical connection required excavation and earth workcomplete all as specified & directed by Engineer-in-Charge. |
| 21 | Item No 12 : Dismantling & Taking outany type of electric steel polesalong with all connected accessories by removing all electrical connection required excavation and earth workcomplete all as specified & directed by Engineer-in-Charge. |
| 22 | Item No 13 : Supply and errect Steel tubular swaged poles type 410 SP-31 (9.0 metres long) complete with MS base plate, finial taper plug, bolts, nuts, screws and top cover, with single swan neck bracket all as specified, directed and including the following:- (a) Excavation in trenches not exceeding 1.5 mtr wide and 1.6 mtr deep for pole foundation and getting out in soft/loose soil, returning filling in the excavation of soil after fixing the pole in foundation ramming earth around in layer not exc 25cm thick and disposal of surplus soil to a distance not exc 50 mtrs. (b) Material and labour for providing PCC 1:4:8 type D-2, using 40mm graded stone aggregate as in foundation, 600 mm x 600 mm cross section for 150 mm and PCC 1:3:6 type C-2, using 40mm graded stone aggregate as in foundation, 600 mm x 600 mm cross section planting depth 1.5 mtr for concrete casing the pole upto GL complete all as directed. (c) Material and labour for providing PCC 1:2:4 type B-1, using 20mm graded stone aggregate for plinth block/collar above GL 300 mm high and 600 mm x 600 mm cross section all as directed. (d) Material and labour for painting of pole externally with one coat of black bituminous paint (upto planting depth) and above plinth block/concrete collar with two coat of aluminium paint over a coat of red oxide steel primer for preparation of surface complete all as directed. |
| 23 | Item No 14 : S & FInfrared sensor based NATURE SWITCH three phase 12 kw consisting of AC power contactor,required rated MCB conforming to relevantIEC/ IS standards for load switching and terminal blocks.The enclosure is made of UV stabilized, FR grade special moulding compound to provide a rust proof, electric shock proof, termite proof, outdoor mountable electrically insulating body capable of enduring solar radiation in the outdoor & suitable formounting. The enclosure is provided with mounting brackets, cable glands, openable door with lock and key. Selectable options for duration based switching OFF as well as override facility for maintenance should be available complete. including taking down old u/s sensor switch or timer switch etc. all as directed |
| 24 | Item No 15 : Supply and fixroad lighting luminaires, 90 watts, 230 Voltwith inbuilt SPD/ surge protecting device IK 07 high power IP 65/66 rated LED with unique peanut lens for uniform distribution, higher spacing between poles,fixing it in new bracket (painting the bracket with one coat of red oxide and one coat of aluminum paint)and connecting it with pole mounted junction box with 2.5sqmm 2 core copper conductor all as directed. |
| 25 | Item No 16 : Supply and fix junction box made out of polycarbonate with IP 65 protection ofspecified size for 10-25sqmm XLPE cables,having terminals for termination of cable with necessary nuts and bolts, including polycarbonate cable gland, 01 Nos rail for mounting of MCB and 01 No, MCB SP, 10 KA, 6 Amps in and including fixing clamp of FI 50 x 6mm with necessary nuts and bolts complete all as directed.Make |
| 26 | Item No 17 : Dismantling carefully the existing Un-serviceableLT Overhead line ACSR conductor of any size from its position by necessary disconnecting of conductor complete all as specified and directed. |
| 27 | Item No 18 : Preparing old painted surfaces of HT/LT Steel tubular poles including cross arms, back plates, bracings, all exposed surfaces of steel items fixed with the pole, without dismantling and M&L for painting with two coats of aluminium paint all as specified and directed.Note: HT poles should be marked with RED & BLACK stripes and LT poles should be painted with YELLOW & BLACK stripes. |
| 28 | Item No 19 :S& F in repairs three core PVC insulated cables 1.5 Sqmm size, 1100 Volt grade with copperconductor and drawing into street light brackets/PVC Conduits and connecting with Junction Box and Street light fittingscomplete all as specified and directed. |
| 29 | Item No 20 : M& L for cable root indicator MS sheet embossed with LT 1100 Volts Volts UGmade with CI Plate6 mm thick fixed with MS angle Iron of size 30x30x4mm of length 400 mm longincluding PCC work 1:2:4 type B1 of size 150x150x150 mm complete allas specified & directed |
| 30 | Item No 21 : Dismantling and taking down carefully external/street light fittings along with all connected accessories complete all as specified & directed by Engineer-in-Charge. |
| 31 | Item No 22 : Earthing complete with galvanised steel earth plate electrode 60 cm x60 cm x 6 mm thick buried directly in ground ,(Earth pit not less than 2.25 meter deep below ground level) with top edge of plate not less than 1.5 meter below normal ground level ,connected to and including galvanised iron earth lead wire4 mmby means ofnut, bolts, check nuts and washers of galvanised iron or steel complete all as specified and directed including testing on completion including the material and labour of the following : - (a) Excavation and earth work for drilling hole for electrode in any type of Soil. (b) reinforced with welded steel wire fabric weighing not less than1.87 Kg/ Sq meter. (c) Funnel with watering pipe of GI 20 mm nominal bore light grade and lugs etc complete all as specified and directed (d) 20 mm nominal bore medium grade GI protection pipe 5 meter long for protection of earthing lead complete all as specified and directed. (e) Requisite quantity of common salt and charcoal. (f) Testing of earthing. |
| 32 | Item No 23 : Earthing complete with galvanised steel earth plate electrode 60 cm x60 cm x 6 mm thick buried directly in ground ,(Earth pit not less than 2.25 meter deep below ground level) with top edge of plate not less than 1.5 meter below normal ground level ,connected to and including galvanised iron earth strip 25 X 4 mmby means ofnut, bolts, check nuts and washers of galvanised iron or steel complete all as specified and directed including testing on completion including the material and labour of the following : - (a) Excavation and earth work for drilling hole for electrode in any type of Soil. (b) reinforced with welded steel wire fabric weighing not less than1.87 Kg/ Sq meter. (c) Funnel with watering pipe of GI 20 mm nominal bore light grade and lugs etc complete all as specified and directed (d) 40 mm nominal bore medium grade GI protection pipe 5 meter long for protection of earthing lead complete all as specified and directed. (e) Requisite quantity of common salt and charcoal. (f) Testing of earthing. |
| 33 | Item No 24 : Dismantling and taking down carefully old u/s junction box of any size along with all connected accessories complete all as specified & directed by Engineer-in-Charge. |
| 34 | Item No 25 : Surface excavation n. exc 30cm deep and averaging 15cm deep and getting out in soft/loose soil complete. |
| 35 | Item No 26 : Add or deduct item No 25 butand averaging 30cm deep and getting out in soft/loose soil complete. |
| 36 | Item No 27 : Preparing surfaces of black top surfaces by brushing with wire brushes for removing caked mud etc. sweeping with brooms and finally fanning the cleaned surface with gunny bags to remove all loose dirt etc. |
| 37 | Item No 28 : M & L Laying and compacting 150 mm thick (compacted thickness) Granular Sub Base Course (GSB) grading as per Grade III as specified Table 400-1 of MaRTH specifications for Road and Bridge works, 2013, in a single layer over compacted subgrade with natura sand, crushed gravel, crushed stone, crushed slag or combination thereof as per the grading required. The materials are mechanically mixed, spread and leveling on the subgrade by using motor grader of adequate capacity, and rolling with vibratory roller of capacity 80-1 00 KN static weight for achieving required compaction density of atleast 98% of the Maximum Dry Density. Consolidating to required gradient and camber complete all as specified and directed with finished surface tolerances as per Table 900-1 of MaRTH specifications for Road and Bridge works, 2013. |
| 38 | Item No 29 : M & L for 150 mm thick laying and compacting 75 mm thick (compacted thickness) Wet Mix Macadam (WMM) grading as pe table 400-13 of MaRTH specifications for Road and Bridge works 2013 manufactured in WMM plant material comprising of clean, crushed, graded aggregate and granular material premixed with wate to a dense mass, spreading with sensor paver and rolling with vibratory roller of capacity 80-1 OOKN static weight and consolidating to required gradien and camber complete all as specified and directed The finished surface tolerances to be as per Table 900-1 of MaRTH specifications for Road and Bridge works 2013complete all as specified and directed. |
| 39 | Item No 30 : Applying evenly a prime coat of Cationic Bitumen Emulsion SS1 confirming to IS: 8887 at a rate of application of 0. 7-1 kg/sqm on surface of WMM including preparation of WMM surfaces as specified in Table 500-3 of MoRTH specification for road and bridge works 2013, using mechanical sprayer complete including preparation of WBM surfaces all as specified and directed . |
| 40 | Item No 31 : M & L for premixed bitumenous macadam laid/rolled and compacted to requred gradient and camber (consolidated thickness ) more then 75 mmcomplete all as specified and directed |
| 41 | Item No 32 : M &L for applying eveanly a tack coat of cationic bitumen emulsion (RS-1) confirming to IS:8887 at the rate of application of 0.2-0.3 kg/sqm on bituminious surfaces as specified as table 500-5 of MoRTH specification for road work 2013 using mechanical sparyer after cleaning of existing surfacescomplete all as specified and directed |
| 42 | Item No 33 : M & L for laying bituminous premix asphaltic semi dense concrete VG-30 avaraging 40mm consolidated thickness with 5.5% binder content by weight of total mix using asphalt mechanical mixer plant & consolidated with power road roller to reqd level gradient camber and super elevation. (This item is pertain to prade ground and surface should be smooth after laying carpet being non motorable surface accordingly bidder make quote rate). |
| 43 | Item No 34 : M & LProviding and consolidating 40mm thick premix Dense Aspphaltic Concrete (DAC-II) using minimum 5.5% VG30 binder by weight of total mix aggregate gradation as per Bituminous Concrete Grading 2 of Table 500-17 of MoRTH specification of road and Bridge work 2013, roled and compected to required canber and gradient as specified and directed. |
| 44 | Item No 35 : S & F Asphalt Content Tester unit as per standard ASTM D6307 & EN 12697 39 for detemination of ashphalt content of hot mix asphalt (HMA) paving mixture and and pavement samples by removing the asphalt in an ignition furnace by meand of sample heating not by means by solvents suitable for operation on 415, 50 Hz, 20A, 30 Ph, AC supply with following technical specificaiton:- (a) Working Temp - 540 ± 5 degree centigrate(b) Combustion Temp - 750 deg cent(c) Bal capacity - 10 Kg (d) Accuracy of Balance - 0.1g(e) Balance Capacity (Usable) - 2500g(f) Recommended Weight of Sample - 1500g(g) TIme for Test Result - 30 to 35 Min(h) End point Sensitivity - 0.01% for 3 consecutive minutes(j) Data output - Through SD Card(k) Chamber Size - 300mm x 340mm x 400mm(l) Outer side 590mm x 755mm x 1300mm(m) Power Rating - 5KW(n) Accessories - Sample Bucket 2 sets, Safety cover for bucket 2 Nos, Lifting Handle 1 Nos, Asbestos Glves 2 PairsMake :- Aimil Cat part No AIM 590 or equvalent as approved by GE. |
| 45 | Item No 36 : M&L for Providing and laying 80mm thick factory made chamfered edge cement concrete paver block of M-30 grade with approved colour, design & pattern as in footpath,parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of coarse sand,compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using late vibrator, fillingthe joints with fine sand and cutting of paver block as per required size and pattern, finishing and sweeping extra sand; complete. complete all as specified |
| 46 | Item No 37 : M&L for moorum /red bajri filling in floors or paving laid in layers n.exc 15 cm thickness spread levelled and rammed including watering complete all as specified |
| 47 | Item No 38 :M&L for Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves(thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required complete. complete all as specified |
| 48 | Item No 39 : M & Lfor brick work with sub class B brick straight ir curved on plain exc 6 mtr mean radius built in CM 1:6 Complete all as specified. |
| 49 | Item No 40 : M & L rendering 15mm thick on brick wall or concrete surface in cement mortar 1:6 finished even and smooth without using extra cement complete all as specified. |
| 50 | Item No 41 : M&L for preparation of new surfaces of walland applying three coats of white wash complete all as specified and directed. |
| 51 | Item No 42 : M & LPCC type B0 (1:2:4) 12.5 mm graded aggregate as cills, steps, seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones bed plates, etc inluding weathering, slightly rounded or chamfered angles and throating, as directed |
| 52 | Item No 43 : M&L reinforced concrete pipes 600mm bore, class NP2, laid and jointed complete with collars joints all as specified and directed. |
| 53 | Item No 44 : M&L for concrete bed for 600 mm dia pipe concrete bed type C2 1:3:6 using 40 mm graded aggregate to drain pipes including packing under and completely surrounding pipes with concrete after they are laid and tested; in complete all as specified and directed. |
| 54 | Item No 45 : M&L reinforced concrete pipes 450mm bore, class NP2, laid and jointed complete with collars joints all as specified and directed. |
| 55 | Item No 46 : M&L for concrete bed for 450 mm dia pipe concrete bed type C2 1:3:6 using 40 mm graded aggregate to drain pipes including packing under and completely surrounding pipes with concrete after they are laid and tested; in complete all as specified and directed. |
| 56 | Item No 47 : M&L preparation of road surface and applying thermoplastic relflective paint in white or any tint marking of min 2 mm thick single coat as in center line and edge line road marking of 150/100 mm width using \"\"HOT MARK\" thermoplastic modern propelled road marking machine as directed incl all ingredients such as blinder, glass beads, Titaniumdioxide calcium carabonate inter fillers thermroplastic requirement for glass beads shell be the Table No 650.4 of MOT specifications incl spraying of glass beads etc all as per manufactures instrustions and as directed |
| 57 | Item No 48 : M&L for RCC Design Mix M-30 as in Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs,Plinth Beam and in shelves and the like complete all as specified and directed. |
| 58 | Item No 49 : M&L for RCC M-25 (design mix) (20mm graded aggregate) concrete in walls, retaining walls, basement walls, ballast walls and the like, any thickness, above top of footings, including attached pilasters and buttresses. |
| 59 | Item No 50 : M&L for RCCM-25 (Design Mix) (using 20 mm gradedaggregate) in foundations including rafts, footings and mass concrete. |
| 60 | Item No 51 : Use and Waste Formwork to soffits of suspended slabs such as roof slabs,floor slabs, landings and similar work; not exceeding 200mm thick Horizontal or sloping rough finished of concrete surface. |
| 61 | Item No 52 : Use and Waste formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work, vertical or to batter all as specified |
| 62 | Item No 53 : M&L for fair finished flat form work to faces of walls, retaining walls, abutments, parapets and staircase railings and similar work including attached pillasters, buttresses, etc, vertical or to better. |
| 63 | Item No 54 : M&L for mild steel TMT bar 10mm dia and over cut to length, bent to shape required including cranking, bending spirally, hooking ends and binding with and including mild steel with (annealed) not less than 0.9mm dia. |
| 64 | Item No 55 : M&L for Mild steel TMT bars 6 to 8 mm dia., and over cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia., or securing with clip etc |
| 65 | Item No 56 : M&L for Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 |
| 66 | Item No 57 : M&L for preparation of two coats of synthetic enamel paint on new steel surfaces on any description, over 10cm in width or girth, not other wise described incl preparation over a coat of red oxide zinc chrome prime complete |
| 67 | Item No 58 : Demolition of un-reinforced Cement Concrete of any description and in any position not otherwise specifically provided for. |
| 68 | Item No 59 : M&L Granite(of any type) tiles 16 to 18 mm thick as in any position andsimilar works over 10mm thick cement screed in CM 1:4, machine cut, bedded and jointed with grey cement slurry and pointed with white cement and pigment to match the shade of granite stone incl cutting, polishing complete. |
| 69 | Item No 60 : Excavating in trenches n.exc. 1.50m wide and n.exc. 1.50m in depth for foundation etc and getting out in soft/loose soil. |
| 70 | Item No 61 : Returnig filling in including spreading, levelling, watering and well ramming in layers not exc 25 cm of soft/loose soil |
| 71 | Item No 62 : Removing excavating surplus soil, n.exc. 50.0 m and depositing where directed at a level n.exc. 1.50m above the starting point. |
| 72 | Item No 63 : Supply and fixing in cat eye solar reflective type of metal body alloy of size 100mm x 100mm x 20mm with PAMA striplens reflector of model No. DA 972.0 fixed with and incl MS stud of suitable size as per manufactures instructions. |
| 73 | Item No 64 : Supply and fixing in solar cat eye aluminum alloy shall (100% water proofing design according to 65) of size 125mm x 125mm x 25mm (shank 65mm) of high efficiency Mono rystafie solar panel 2.4V/ 0.3 watt one NI-ed rechargeable battery (1.2V/ 1600MA) consisting of super bright LED with 10,000 to 18,000 mcd completed as per manufactures instructions etc. all as specified and directed |
| 74 | Item No 65 : S&F Traffic convex minor of size 800 mm dia unbreakable having clear and definite mirror image with upper class collar provided with suitable clamps & nut bolts. The complete set shall be fixed on MS pipe 65mm NB 2.0 meter long from Ground level duly powder coted/painted white/blue color etc complete all as specified and directed.. |
| 75 | Item No 66 : Supply and fixing metal tubular dealineator made out of ABS round body fitted with 2 Nos 65 mm dia highly reflective reflectors made out of PMMA and mounted on 45/50 mm dia mild steel pipe of 600 mm height duly powder coated and thermo plastic elastomer 3 bands of green, red and yellow reflector radium tape of 25 mm wide strips with anti theft steel net for reflector protection including embedding in PCC 1:2:4 (150x150x300mm) type B1 complete all as specified and directed |
| 76 | Item No 67 : M & L for including two coat of concrete paint and one coat of primer on existing kerb stone, brick wall, stone, concrete surface on old painted prepared surfaces over 10cm of girth or width not otherwise described complete all as specified and directed. |
| 77 | Item No 68 : M&L for Cleaning of Existing Surfaces of Interlocking Tiles/Chequred Tiles and applyning coat of readymade liker painting with melamine finish appxy based complete all as specified & directed. |
| 78 | Item No 69 :Supplying and laying 100 mm bore Ductile Iron Pressure Pipes, Centrifugally Cast [Spun], Class \"K-7\" with both side Flanged ends conforming to IS - 8329 in standard lengths with inside Cement Mortar Lining and Black Bitumen external coating and including necessary DI Specials as required complete all as specified and as directed. |
| 79 | Item No 70 : Supplying and laying 150 mm bore Ductile Iron Pressure Pipes, Centrifugally Cast [Spun], Class \"K-7\" with both side Flanged ends conforming to IS - 8329 in standard lengths with inside Cement Mortar Lining and Black Bitumen external coating and including necessary DI Specials as required complete all as specified and as directed. |
| 80 | Item No 71 : M&L for tapping in existing DI pipe lines 150 mm dia and inserting tee of 150x 100 mm and all as directed. |
| 81 | Item No 72 : Construction of brick masonry valve pit of size 1200 mm x 1200mm x 900 mm (internal dimensions) with one brick thick wall in cement mortar 1 : 4 on 100 mm thick PCC 1:4:8 type D2 (using 40mm graded broken stone aggregate) as in foundation lean concrete, including PCC 1:3:6 type C-1 (using 20mm graded crushed stone aggregate) as in benching and coping and 10mm thick cement plaster in CM (1:4) internally and externally upto 15cm below ground level providing valve pit cover 40x40x6mm angle iron frame all-round fixed by means of 4 Nos holdfast 150mm long made out of flat iron 40x6mm embedded in PCC block (1:2:4) type B-1 (using 20mm graded crushed stone aggregate) of size 230x200x100mm incl provn of hinges welded with angle iron frame and MS cover 3mm thck sheet, MS handle of suitable length and size welded with MS cover and suitable locking arrangement and applying two coats of synthetic enamel paint over a coat of red oxide primer including necessary excavation and earth work in soft/loose soil complete all as shown on drawing and as specified. |
| 82 | Item No 73 : Supply and fix Gun metal Sluice Valves, flanged of class 1.6 PN,100 mm dia and all as directed. |
| 83 | Item No 74 : Excavating in trenches in any type of soil , n exc 1.5 m wide and exc. 1.5 m in deep and n.exc 3.0m deep for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and getting out soil complete all as specified and as directed |
| 84 | Item No 75 : Supplying and laying and jointing for (SN 8) DWCPE 180mm (OD)/ 163 (ID) conforning to IS-16098:2013 part -I with and incl jointing materials complete complete all as specified and as directed. |
| 85 | Item No 76 : M&L for concrete bed to drain pipes including packing under, and haunching against the sides of pipes after they are laid and tested in cement concrete 1:4:8 complete all as specified and as directed. |
| 86 | Item No 77 : M&L for extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using ex- tra cement, including forms, moulds, mi- tred/stopped ends etc. |
| 87 | Item No 78 : M&L for Brick work with sub class B bricks straight or curved on plan exc. 6m mean radius built in cement mortar (1:4).complete all as specified and as directed. |
| 88 | Item No 79 : Supply only water proofing compound. |
| 89 | Item No 80 : M&L for cement concrete type B2 , 1:2:4 using 40 mm gradded stone aggregate in surface channels and drains complete |
| 90 | Item No 81 : M&L RCC Septic tank conventional type designed to carry sewage and sullage water, excavation in any type of soil, PCC 1:4:8 below foundation, RCC M-30 Design Mix in Walls , Base Slab , Baffle walls and Roof Slab including beams etc with Vent shaft , manhole openings with cover connection etc., complete with effective depth of 1.5 meter and overall depth of 3 meter for 50 users. |
| 91 | Item No 82 : M&L Soakage wells excavation, in any type of soil, foundation in PCC 1:3:6, walls of honey combed masonry with top ring of M25 concrete including intercepting chamber and screen chamber made of Brick masonary in CM, RCC cover slab in M25/ SFRC cover, interconnecting pipes of RCC/DWC complete filled with brick bats of size 3.0 M x 3.0 M depth complete |
| 92 | Item No 83 : Supply and laying or fixing or passing in trenches/ on pole/ through pipes,1100 volts grade XLPE insulated, screened PVC bedded, galvanised steel strip or wire armoured, heavy duty electric cable with stranded aluminium conductor of cross section area 70 sqmm, 3.5 core conforming to IS 7908 / (PART-I) 1988 with the latest amendments includingjointing materials such as cable glands & lugs etc and testing on completion all as directed. |
| 93 | Item No 84 : Supply and laying or fixing or passing in trenches/ on pole/ through pipes,1100 volts grade XLPE insulated, screened PVC bedded, galvanised steel strip or wire armoured, heavy duty electric cable with stranded aluminium conductor of cross section area 50 sqmm, 3.5 core conforming to IS 7908 / (PART-I) 1988 with the latest amendments includingjointing materials such as cable glands & lugs etc and testing on completion all as directed. |
| 94 | Item No 85 : Supply and laying or fixing or passing in trenches/ on pole/ through pipes,1100 volts grade XLPE insulated, screened PVC bedded, galvanised steel strip or wire armoured, heavy duty electric cable with stranded aluminium conductor of cross section area 35 sqmm, 3.5 core conforming to IS 7908 / (PART-I) 1988 with the latest amendments includingjointing materials such as cable glands & lugs etc and testing on completion all as directed. |
| 95 | Item No 86 : M&L for cross arms, bracing, supports, clamps and back plates fabricated from structural steel sections including nuts, bolts, washers, welding, bending cold or hot, drilling holes for bolts, in any shape or size as indicated or directed and inclusive of one primer coat, one under coat and one finishing coat of aluminum paintcomplete all as specified and dircted. |
| 96 | Item No 87 : M&L for GI tube light grade with all fitting laid in trenches of fixed to pole of size:- |
| 97 | (a) 50 mm Dia |
| 98 | (b) 80 mm Dia |
| 99 | Item No 88 : Supply, installing, testing & commissioning factory made(CPRI approved and as per make given in CA) outdoor type, floor mounted LT panel board cubical type suitable for 415 volts 3 phase 4 wire 50 c/s AC supply system having bus bar chamber with insulated Alumium bus bar of rating 400 amp for phase & neutral, installed on porcelain insulators the panel shall be dust & vermin proof IP 65class protection & made of 3.15 mm CRCA MS sheet and 50x50x6mm thick MS angle iron frame work, powder coated finish over one coat of red oxide primer on outer surface and painted inside with two coats of red oxide primer front ,Double door with both side opening including Neoprene Rubber Gasket, including Danger Plate, Earthing Strip Point and Ventilation Louvers at Rear Side, Bottom detachable Gland Plate complete with suitable size Zinc Chromium Plated Nuts, |
| 100 | Bolts and Washers, etc opening type including internal wiring with PVC insulated solid copper conductor cable 1100 volts grade of appropriate size (but not less than 6sqmm) Mild Steel Angle Iron Frame and 750 mm above the Normal Ground Level complete withinternal connection with suitable size of cable, cable lugs and cable glandsPCC Foundation in Cement Concrete 1:3:6 (20 mm Graded Stone Aggregate) and Testing after Installation includingcomplete all as specified and comprising of the following:- BUSBAR :-(i)400 Amps rated aluminiumbus bar TPN duly insulated with coloured PVC sleeve as per standard colour code and rigidly mounted on bakelite/DMC insulatorbus bar support (Square/round) insulators of suitable size and good insulation resistance: |
| 101 | (a) Incoming |
| 102 | (a)MCCB 200 Amps,4 pole 25 KA, rotary handle,Adjustable thermal & fixed magnetic setting (Incoming)- 01 No |
| 103 | (b)Digital Voltmeter 3 PhaseClass-1 50Hz - 01 No. |
| 104 | (c)Digital Ammeter3 Phase Class-1 50Hz - 01 No. |
| 105 | (d) Indicator Lamps (LED type) & bakelite fuseshowing R,Y, G phase - 01 set |
| 106 | (e) Copper wound with rated CT Ratio- 03 Nos |
| 107 | (b) Outgoing |
| 108 | (i) MCCB 100 Amps,4 pole 25 KA, rotary handle,Adjustable thermal & fixed magnetic setting (Outgoing)- 02 Nos(1 Working +1 Standby) |
| 109 | (ii) MCB 4 Pole 40 Amps,10 KA at 415 volts- 02 No. |
| 110 | (iii) Indicator Lamps (LED type) for R,Y, B phase - 03 set |
| 111 | (iv) Auto control time switch, timer control for different 24 hours & 7 days adjustable type including power contactor of rated capacity complete - 02 Nos |
| 112 | (v)Panel drawing shall be got approved before placing of order from Engr-in-Charge/GE. |
| 113 | Item No 89 : S & F tubular pole 4 mtr decorative pole PU Painted ( GI pole dia -140 mm of height 1 mtr with another connecting GI pole dia 90 mm of height 3 mtr) thickness 3.4 mmwith MS base plate 300x300x10mm Aluminium Embellishment ,integrated junction box with earthing connections &including 1 mtrdouble arm designer bracket with 2 Nos of 40/45 watt LED post top LanternIP 65 rated made with die cast aluminium glare free optically designed diffuser with high efficiency LED\"s and including 4 way connectorall as specified and directed. |
| 114 | Item No 90 : Supply & installation of Raising and Lowering type (height as per requirement) high mast system hot dip galvanized system in single dip, suitable for wind velocity as per IS 875 Part-III with only one longitudinal seam weld pre section but without circumferential weld including accessories viz head frame, 2 point suspension `system with steel wire rope min 6 mm dia 7/19 gauge, double drum winch, galvanized lantern carriage arrangement suitable for and with 9 luminaries assymmetrcal as per drawing approved by GE. Lightning finial, LED aviation obstruction light, lighting arrester spike,foundation bolts, nuts anchor plates, templates, trailing cable & integral power tool for raising and lowering operation of high mast with and including following technical specification :-a) High Mast System. 1. Height of mast – 16 mtr2. No of section – Two3. Material construction – S 355 grade as per BS-ENI0025 4. Base dia and top diamtr (A/F) – 360 mm & 150 mm respectively |
| 115 | 5. Plate thick ness & section length – top 3 mm x 5420 mm,Bottom – 4mm x 10980mm 6. Cross section of Mast – 20 side polygon7. Standard for galvanization – As per BS EN ISO 1461 8. Size of opening and door at base - 1050 mm x 225 mm 9. Diameter of base plate – 520 mm 10. Thickness of base plate – 25 mm 11. Lighting protection finial – GI single spike 12. Maximum wind speed – 50 m/s as per IS: 875 (Part-III) or as per site conditions.13. Number of foundation bolts – 6 Nos 14. PCD of foundation bolts – 445 mm 15. Type /diameter/length of foundation bolts – TS 600/24 mm dia/750 mm long |
| 116 | (b) Luminaires Carriage(i) Material of construction – min 50NB ERW Class „B‟ – MS pipe/angles(ii) Diameter of carriage ring (mm) – 535 mm (ID)(iii) Construction – 6 arm or as required for mounting min 09 Luminaries, welded, 1 sections/ part or as per designed finalised by Engineer in charge(iv) Load carrying capacity –Min9 Luminaries.Note:All the specifications are tentative.Any variationsas per OEM standard should be accepted if required. |
| 117 | (c) Winch / Power Tool(i) Type /SWL of winch – Double Drum/350 kg(ii) Method of operation – Integral motor/ Manual(iii) Motor capacity – 1 HP Three Phase(iv) No of speed – 6 Pole, single speed (d) Stainless Steel Wire Rope(i) Grade/construction – AISI304, 7/19 construction(ii) Number of ropes – Two(iii) Diameter (mm) – 5 mm (min)(iv) Braking load capacity – 1450 kg x 2(v)Trailing Cable (1 sets 5 core x 2.5 sq. mm. EPR PCP Round Copper). |
| 118 | Note : (i) Guranteed Technical parameters and foundation drawing should be prior approved by Engr-in-chage before placing the finalorder by the contractor.(ii) Installation of high mast to be carried out by the rep of manufacturer and the foundation rate deemed to beincluded in the quoted rate..(iii) Neccesary cable/ wire to connect the flood light luminaire from Junction box at bottom to ightmounting channel is inclusive in the quoted rates.(iv) Rate of feeder pillar is exclusive in the quoted rate. |
| 119 | Item No 91 : Supply and fixroad lighting luminaires, 400 watts Flood lights,CCT 5700 K with LED driver,including Surge protecting device ,Efficacy 140 Lm/watt,230 Volthigh power IP 65/66 rated LED with unique peanut lens ,high pressure die cast aluminium housing,toughened glass , for uniform distribution,all as specifed and directed. |
| 120 | Item No 92 : S&F earth continuity conductor or main earth lead of 25 X 3.15 mm aluminium strip with saddles and fixing screw etc for roof conductor and down conductor fixed to wall on batten or recess or ground for connecting earthing to various equipments as required complete all as directed. |
| 121 | 02 X SPECTATOR External Water Supply |
| 122 | Item No 93 : Supply and lay pipe galvanized, “Medium class”, including fittings of dia 25 mm and all as directed. |
| 123 | Item No 94 : Supply and lay pipe galvanized, “Medium class”, including fittings of dia 20 mm and all as directed. |
| 124 | Item No 95 : Construction of brick masonry valve pit of size 600 mm x 600 mm x 600 mm (internal dimensions) with one brick thick wall in cement mortar 1 : 4 on 100 mm thick PCC 1:4:8 type D2 (using 40mm graded broken stone aggregate) as in foundation lean concrete, including PCC 1:3:6 type C-1 (using 20mm graded crushed stone aggregate) as in benching and coping and 10mm thick cement plaster in CM (1:4) internally and externally upto 15cm below ground level providing valve pit cover 40x40x6mm angle iron frame all-round fixed by means of 4 Nos holdfast 150mm long made out of flat iron 40x6mm embedded in PCC block (1:2:4) type B-1 (using 20mm graded crushed stone aggregate) of size 230x200x100mm incl provn of hinges welded with angle iron frame and MS cover 3mm thck sheet, MS handle of suitable length and size welded with MS cover and suitable locking arrangement and applying two coats of synthetic enamel paint over a coat of red oxide primer including necessary excavation and earth work in soft/loose soil complete all as shown on drawing and as specified. |
| 125 | Item No 96 : S&F gun metal gate valve of following sizes screwed down high pressure with handle, Iron wheel (ISI marked) complete all as directed. |
| 126 | (a)50mm bore |
| 127 | (b)25mm bore |
| 128 | (c ) 20mm bore |
| 129 | Item No 97 : Supply, installation,commissioning of Water cooler fully stainless steel, electric driven single phase, having approx storage capacity of 120 litre and nominal cooling capacity of 60 Litres per hour with all connected accessories, platform and waste water drain out system. |
| 130 | Item No 98 : Supply only bottled water dispenser, having option of dispensing hot and cold water with cooling capacity 3 ltrs/hr, heating capacity 6 ltrs/hr and tank capacity 16 ltrs, working in R - 134a refrigerant complete all as specified and directed. |
| 131 | Item No 99 : Material and labour for providing and laying 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with aproved colour, design & attern as in foothpath, parks, lawns, drive ways or light traffic arking etc. of required strenght, thickness & size / shape, made by table vibrating method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding / laying of interlocking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra cement complete all as specified and directed. |
| 132 | Item No 100 : Removing excavated material upto total distance of 1.5 km and depositing complete all as specified and directed. |
| 133 | Item No 101 : Supply, Installation, Testing and Commissioning of silent Diesel Engine driven generating set not less than 100 KVA or nearest standard size, 415 volts, 3 phase 4 wire, 1500 rpm, 50 Hz power supply with power factor 0.8 couple directly to alternator mounted on a common base platecomplete with integral acoustic enclosure having silent features such as modular bolted construction with fabrication on imported CNC torret punch machines, nine tank treatment process with pure polyster based powder coating to ensure long life in all weather conditions and for out door application/ installation, integrated design thereby facilitating /easy handling installation & shifting of the equipment at site. The design of integral acoustic enclosure should be any type approved by national Physical laboratory as per Central Pollution Control Board (CPCB-IV + Emmission compliant) latest norms/regulation Noise level 75dB(A) at a distance of one meter with fuel tank, battery and standard accessories as recommended by manufacturer, vibration pad, sand cushioning around PCC foundation, tools and spares, as provided by manufacturer all as specified and as directed with the following specifications of :- |
| 134 | ENGINE - 4 cylinders, inline, 4 stroke cycle, Water cooled ,1500 RPM under NTP conditions of BS:5514. The engine shall be provided with electrical starting arrangement & shall give the electrical output 100 KVA/ 80 KW at 0.8 power factor 415Volts at the alternator terminal |
| 135 | ALTERNATOR: single bearing alternator suitable for continuous operation generating 100 KVA at 1500 RPM, 415Volts , 0.8 power factor (lag) suitable for 50 Hz, 3 phase, 4 wiresystem, confirming to BS 5000/ IS 4722. The alternator is brushless type, screen protected, revolving field,self excited alternator confirming ti IS/IEC 60034-1, self regulated through an AVR. The alternator has the following features: a) ± 0.50% voltage regulation (max.) in static conditions (b) IP: 23 protection with insulation class H.(c) Permissible overload of 10% for one hour in 12 hours of operation.(d) 3 phase reconnectable winding with 12 terminal brought out for connection.(e)dedicated winding speecially designed for 1 phase operation (f) double layer lap startor winding (g) PCC foundation complete as per manufacturer\"s design including anti vibration pads, necessary excavation & earth work in soft/loose, sand cushioning, grouting foundation etc. |
| 136 | Features, Functions, Protections(a) 16 character x 2 line alphanumeric LCD display with LED backlight(b) Operator interface (c)Provide a record of most recent fault conditions. Fault history stored in the control non volatile memory(d) Provide Alternator data fequency Control includes provision for Service adjustment and calibration of DG control functions(a)Voltage, frequency selection(b)Meter calibration(c)Configurable input and output set up PowerStart operates on 12 V DC batteries Auto start mode accepts a ground signal from remote devices to automatically start the DG set. The remote start will also wake up the control system from sleep mode. |
| 137 | Engine Starting – The control system supports automatic engine starting, Primary and back up start disconnects are achieved by battery charging alternator feedback or main alternator output frequency.Controller provide configurable time delay of 0-300 sec to start after remote start signal and time delay of 0-600 secs prior to shutdown after stop signal.Sleep mode increase battery life. Configurable current settings from low to minimize current draw when genset is not working. |
| 138 | EngineProtective Functions includes -Configurable alarm outputEmergency stop: Annunciated whenever an emergency stop signal is received by the control(a).Low Lube oil pressure warning and shutdown(b)High engine water temperature warning/ shutdown(c) Low coolant temp warning (d) Sensor failure indication(e)Low and high battery voltage warning (f) Weak battery warning (g) Fail to start shut down(h) Cranking lockout: Control will not allow the starter to engage or to crank the running engine(j) Cyclic cranking : Configurable for the number of starting cycle (1 to 7) and duration of crank and rest periods.Alternator Protective functions includes : (l)High and Low AC voltage shut down(m) Under and over frequency shutdown / warning(n) Loss of sensing voltage input shut down (o) Battery charger alternatorFuel tank: Sub Base Fuel tank of 14 SWG MS sheet of adequate capacity to operate 8 to 12hrs on 100% load.(b) Base Rail: Base Rail with integral fuel tank is provided.Batteries: For electrical control circuit ,12 Volts/150/180 AHbattery for electrical starting of DG set inbuilt charger as per OEMNote:- The testing of DG set is carried out by IEM detail by accepting officer. |
| 139 | AMF ELECTRICAL CONTROL PANEL : Inbuilt AMF Panel is manufactured with 14/16 guage fabricated out of 2mm thick CRCA sheet, floor mounting type, powder coated for weather-proof and long lasting finish, totally enclosed,front higed cover,instrument swithches and panel complete alla as specified and required. |
| 140 | One set of accessories (As per manufacture\"s instruction) :- |
| 141 | (aa)Fuel tank with locking arrangement for 8 hours running on full load |
| 142 | (ab)Level indicator on fuel tank |
| 143 | (ac)Drain plug |
| 144 | (ad)MS class \"C\"piping , suitable dia and length for fuel inlet from tank to engine as per manufactures instruction. |
| 145 | (ae)Fuel strainer and fuel tankwith air vent. |
| 146 | (af) Batteries heavy duty 12 Volts 150/180AH lead acid type fully charged,indication of high flow charing changed : - 01 Nos |
| 147 | (ag)Cable connection from alternator to DG set control panel as directed |
| 148 | Tools (As per manufactures instructions):- |
| 149 | (aa)\"D\" spanners - 01 Set |
| 150 | (ab)Ring spanners - 01 Set |
| 151 | (ac)Screw diver 5\"to12 \"- 01 Set |
| 152 | (ad)Cutting plier 9 \" - 01 No |
| 153 | (ae)Hammer 2 LBS - 01 No |
| 154 | Base frame arrangements . Theengine and alternator would be coupled by means of specially diesigned flexible coupling and both the units including the radiator would be mounted on a rigidfabricated base to form a compact arrangement. The steel shall be Tata / SAIL or equivalent make. |
| 155 | Soundacoustic enclosure :CPCBapproved sound acoustic enclosure sutable for above genrator set with complete set installed within canopy. |
| 156 | Item No 102 : Earthing complete with galvanised steel earth plate electrode 60 cm x60 cm x 6 mm thick buried directly in ground ,(Earth pit not less than 2.25 meter deep below ground level) with top edge of plate not less than 1.5 meter below normal ground level ,connected to and including galvanised iron earth strip 32 X 6 mmby means ofnut, bolts, check nuts and washers of galvanised iron or steel complete all as specified and directed including testing on completion including the material and labour of the following : - |
| 157 | (a) Excavation and earth work for drilling hole for electrode in any type of Soil. (b) reinforced with welded steel wire fabric weighing not less than1.87 Kg/ Sq meter. (c) Funnel with watering pipe of GI 20 mm nominal bore light grade and lugs etc complete all as specified and directed (d) 40 mm nominal bore medium grade GI protection pipe 5 meter long for protection of earthing lead complete all as specified and directed. (e) Requisite quantity of common salt and charcoal. (f) Testing of earthing. |
| 158 | Item No 103 : S & F earth continuity conductor for main earthing lead 32 X 6 mm GI strip burried in ground or fix in walls with boltsall as specified and directed by engineer in charge. |
| 159 | Item No 104: Supply and laying & testing and commisioning LT underground cable 1100 volts grade, XLPEinsulated and PVC sheathed heavy duty armoured with multi staranded aluminium conductor laid in pipes, trenches/ducts, on poles etc of the under mentioned type and sizes complete all as specified and directed :- |
| 160 | (a) 2 core x 10 sqmm |
| 161 | (a) 10 sqmm x 4 core |
| 162 | Item No 105 : M&L for GI tube light grade with all fitting laid in trenches of fixed to pole of size:- |
| 163 | (a) 50 mm Dia |
| 164 | (b) 80 mm Dia |
| 165 | Item No 106 : Supply & installation of Raising and Lowering type (height as per requirement) high mast system hot dip galvanized system in single dip, suitable for wind velocity as per IS 875 Part-III with only one longitudinal seam weld pre section but without circumferential weld including accessories viz head frame, 2 point suspension `system with steel wire rope min 6 mm dia± 7/19 gauge, double drum winch, galvanized lantern carriage arrangement suitable for and with 9 luminaries assymiritical as per drawing approved by GE. Lightning finial, LED aviation obstruction light, lighting arrester spike,foundation bolts, nuts anchor plates, templates, trailing cable & integral power tool for raising and lowering operation of high mast with and including following technical specification :-a) High Mast System. 1. Height of mast – 20 mtr2. No of section – Two3. Material construction – S 355 grade as per BS-ENI0025 4. Base dia and top diamtr (A/F) – 360 mm & 150 mm respectively |
| 166 | 5. Plate thick ness & section length – top 3 mm x 5420 mm,Bottom – 4mm x 10980mm 6. Cross section of Mast – 20 side polygon7. Standard for galvanization – As per BS EN ISO 1461 8. Size of opening and door at base - 1050 mm x 225 mm 9. Diameter of base plate – 520 mm 10. Thickness of base plate – 25 mm 11. Lighting protection finial – GI single spike 12. Maximum wind speed – 50 m/s as per IS: 875 (Part-III) or as per site conditions.13. Number of foundation bolts – 6 Nos 14. PCD of foundation bolts – 445 mm 15. Type /diameter/length of foundation bolts – TS 600/24 mm dia/750 mm long |
| 167 | (b) Luminaires Carriage(i) Material of construction – min 50NB ERW Class „B‟ – MS pipe/angles(ii) Diameter of carriage ring (mm) – 535 mm (ID)(iii) Construction – 6 arm or as required for mounting min 09 Luminaries, welded, 1 sections/ part or as per designed finalised by Engineer in charge(iv) Load carrying capacity –Min9 Luminaries.Note:All the specifications are tentative.Any variationsas per OEM standard should be accepted if required. |
| 168 | (c) Winch / Power Tool(i) Type /SWL of winch – Double Drum/350 kg(ii) Method of operation – Integral motor/ Manual(iii) Motor capacity – 1 HP Three Phase(iv) No of speed – 6 Pole, single speed (d) Stainless Steel Wire Rope(i) Grade/construction – AISI304, 7/19 construction(ii) Number of ropes – Two(iii) Diameter (mm) – 5 mm (min)(iv) Braking load capacity – 1450 kg x 2(v)Trailing Cable (1 sets 5 core x 2.5 sq. mm. EPR PCP Round Copper). |
| 169 | Note : (i) Guranteed Technical parameters and foundation drawing should be prior approved by Engr-in-chage before placing the finalorder by the contractor.(ii) Installation of high mast to be carried out by the rep of manufacturer and the RCC foundation rate deemed to beincluded in the quoted rate..(iii) Neccesary cable/ wire to connect the flood light luminaire from Junction box at bottom to ightmounting channel is inclusive in the quoted rates.(iv) Rate of feeder pillar is exclusive in the quoted rate. |
| 170 | Item No 107 : Supply and fixroad lighting luminaires, 400 watts Flood lights230 Volthigh power IP 65/66 rated LED with unique peanut lens for uniform distribution diecast alluminium with fixing accessories and claimed Nut Bolt etc, all as specifed and directed. |
| 171 | Item No 108 : Supply and fixing LED flood light 70 watt 230 V AC outdoor type with thermal management in multiple optics and equipped with IP66 protection, with impact and corrosion resistant complete with driver and lamp all as specified and directed. |
| 172 | Item No 109 : Supply, fix for bollard 9/10 watt IP 66 protection made of cast aluminium housing with decorativeacrylic diffuser rating protection complete with all accessories fixed on Pipe including Basemounted plate complete all as specified and directed by engg in charge. |
| 173 | Item No 110 : Supply, erection,commissioning and testing of outdoor type LT feeder pillar box, double door,suitable for 3 phase 4 wire, 415 volts AC supply and having 4 Nos Aluminiumbus bar not less 400 Amps mounted FRP insulatorsfor distribution system andCPRI approved, Make as per CA. fabricated in factory having modern fabrication and testing facility which includes seven (09) tanks pre treatment facility comprising of de-greasing, rinsing, de-rusting, rinsing, phosphating, rinsing and passivation followed by powder coated painting (thickness not less than 80 Micron) with approved shade of RAL 7032.The feeder pillar shall be provided with suitable Neoprene rubber gasket to make it completely dust and vermin proof and degree of protection not less than IP-55 and general construction conforming to relevant IS. The feeder pillar shall be made out of 3.15mm thick CRCA mild steel sheetand 3.15mm thick gland plate duly compartmentalized for each control gear and bus-bar, front door (02 layer) and rear Door (01 layer) opening facility and 4 side slanting canopy type roof on top and mild steel channel (75 MC) base frame at bottom and having welded equal angle of 75mmx75mmx6mm of length 0.9mtr, 04 nos,30cm of of angle shall be embedded in PCC 1:2:4, 20mm graded stone agregate below GL level and 30cm shall be above ground level of size as directed by Engr-in-charge at site. |
| 174 | The feeder pillar shall be provided with ventilation facility in the form of louvers for better heat dissipation.Necessary cable gland shall be provided for all incoming and outgoing cables.CONTROL WIRING : All control wirings shall have to be carried out with 1100 volts rated FRLS grade PVC insulated multi-stranded type copper wire of cross sectional area 1.50Sqmm and shall be properly bunched, tied and dressed, ferrule marked for proper identification and crimped with suitable size and type of tinned copper lugs and shall be wrapped with PVC spring type tube near the door hinges. Cable Alley : Necessary cable alley shall be provided for out going cables in both sides of LT panel with terminal block,the terminal block shall be connected with the outgoing MCCB/MCB with copper bas bar of suitable size |
| 175 | INCOMING : 4 pole MCCB having breaking capacity 16 KA ,thermal magnetic release of rating 63Amps, 415 Volts, 50 Hz.- 01 No OUTGOINGS : (a) 4 pole MCCB having breaking capacity 10 KA , \"C\" series of rating 40 Amps.- 01 No (b) 4 Pole MCCB having breaking capacity 10 KA , 415 Volts of rating 32 Amps.- 03 No (c)Time switch microrex analog time switch with contactor -01 Nos and other standard instrumentation complete (d) LED Pilot Lamp suitable for 230 Volts AC supply with integral circuit and cluster LED of following colours : (i) RED - 01 No, (ii) YELLOW - 01 No, (iii) BLUE - 01 No.(e) Digital volt meter 96mm x 96mm suitable to read 0 to 500 volts, accuracy class 1% - 01 Nos(l)Digital Ammeter 96mm x 96mm suitable to read 0 to 200Amps, accuracy class 1% - 01 Nos (f)02 Nos.Danger Notice Plate duly written in Signal Red colour.Note: Drawing should be approved by Engg in charge before placing the order, |
| 176 | Item No 111 : Taking down carefully aluminium point wiring (light, fan, bell, socket, power point etc.) with or without conduit, casing caping, along with all connected accessories such as ceiling rose, switches, sockets, switch boards, fan regulator etc., complete andall as specified & directed. |
| 177 | Item No 112 : M&L for point wiring for light point / fan point with 1.5 Sq mm, FRLS, PVC insulated, single core, unsheathed, multi stranded 1100 volts grade, copper conductor cable drawn throughconcealed PVC conduiton ceiling/wall, with and includingcontinuous 1.5 Sqmm, FRLS, PVC insulated single core multi stranded copper conductor cable earth continuity conductor connected to common earth and earth dolly and including metal sheet enclosure rectangular terminal boxes of suitable size and white cover plates suitable for mounting modular switches, sockets etc all as specified and directed . |
| 178 | Item No 113 : All as specified as item no. 112 above but for one switch socketout let 5 Amps on independent board. |
| 179 | Item No 114 : All as specified as item no. 112 above but for One socket out let 5 Amps on the same board with other switches. |
| 180 | Item No 114 : All as per item No 112 above but with 2.5 sqmm PVC insulated multi stranded copper conductor and 2.5 sqmm PVC insulated multi stranded copper conductor as earth continuity conductor for one socket outlet 15 Amps on independent board. |
| 181 | Item No 115 : Description all as per item No 112 here in before butusing 2.5 sq mm single core copper conductor two noscables of multistranded flame retardant PVC insulated unsheathed 1100 volts grade for 5/15 amps switch socket cobmination point including necessary running of2.5 sq mm copper conductor flame retardant PVC wire as earth continuity conductor along with wiring and connecting to the common eath dolly. |
| 182 | Item No 116 :Supply & FixingModular type Switch single pole 16 Amps one way |
| 183 | Item No 117 : Supply & Fixing Modular type socket out let 2 in 1, 6/16 Amps. |
| 184 | Item No 118 : Supply & Fixing Modular type Socket out let 6 Amps. |
| 185 | Item No 119 : Supply & FixingModular type Switch single pole 6 Amps one way |
| 186 | Item No 120 : S&F frame plate for modular switch 3 module includingscrews and washers etc complete all as specified and as directed. |
| 187 | Item No 121 : S&F frame plate for modular switch 6 module includingscrews and washers etc complete all as specified and as directed. |
| 188 | Item No 122 : S&FMS Housing box 6 module suitable formodular switch as per existingswitch box complete all as specified and as directed. |
| 189 | Item No 123 : S&FMS Housing box 3module suitable formodular switch as per existingswitch box complete all as specified and as directed. |
| 190 | Item No 124 : S&F fan regulator step type, modular, 2 module 220 V complete |
| 191 | Item No 124A : M&L forpoint wiring withFRLSHPVC insulated, unsheathed stranded copper conductor of nominal area 1.5 Sqmm, 1100 volts grade drawn through pvc conduit , along with one single run of same size and type of copper wire as continuous earth wireto common earth dolly in and pvc sunkenterminal boxes for modular switches with brass screw and cup washers with all accessoriescomplete all as specified and directed for one light/ Fan Point controlled by one switch. |
| 192 | Item No 125 : S&F Ceiling rose surface type 60x30 mm three terminals of polycarbonate body complete all as specified & directed. |
| 193 | Item No 126 : Supply and fixSmart bright Batten Series, LED luminaire using LEDs 22 watt, natural white, 2200 Lumen, with diffuser which ensures uniform distribution and comfort batten series features latest LEDs and delivers consistent light output with wide voltage protection range, stable color start Extruded Aluminum housing, Energy efficient, Flicker free start ,with 3 core flexiblecopper wire 1.5 sqmm and connecting accessories ,Inbuilt driver unit Suitable for wall and ceiling mounting using brackets (supplied along with The Luminaire has been tested as per Standard Specification IEC 60598-2-1 / IS: 10322(Parts/Secl), report has established conformity of the product(s) to the requirements of the Standard/Specification. |
| 194 | Item No 127 : Supply & Fixingsheet metal enclosure MCB DB double doorTriple pole and neutral, 415 volts,4 way rated breaking capacity rated bus bar with blanking plate wherever required and IP-43 degree protection complete all as specified & directed. |
| 195 | Item No 128 : Supply & Fixingsheet metal enclosure MCB DB double doorsingle pole and neutral, 240 volts, 8 way rated breaking capacity rated bus bar with blanking plate wherever required and IP-43 degree protection complete all as specified & directed. |
| 196 | Item No 129 : Supply & Fixing sheet metal enclosure MCB DB double door single pole and neutral, 240 volts,4 way withbreaking capacity rated bus bar with blanking plate wherever required and IP-43 degree protection complete all as specified & directed by Engineer-in-Charge. |
| 197 | Item No 130 : S&F in replacement MCB Triple Pole and Neutral 63 Amps,415 V,10KA, \"C\" series breaking capacity complete all as specified & directed. |
| 198 | Item No 131 : S&FMCB Single Pole and Neutral 240Volt, 40 Amps, \"C\"series,10KA breaking capacity complete all as specified & directed. |
| 199 | Item No 132 : S&F MCB Single Pole 240Volt, upto 40Amps,10KA breaking capacity complete all as specified & directed by Engineer-in-Charge. |
| 200 | Item No 133 : M&L ofconcealed in walls /floors Sub main wiring with four single core PVC Insulated cable four run of size 6.0 Sqmm multi-strand copper conductor FRLSH cable 1100 volts grade drawing in and including PVC conduit, medium grade not less than 25 mm dia with all conduit accessories and one run of 6.0 Sqmm multi-strand copper conductor FRLSH cable as continuous earth wire complete all as specified and directed. Note : - four run of 6 Sqmm & one run of 6 Sqmm cable and one run of pvc conduit shall be measured as one unit run.(for 15 A socket) |
| 201 | Item No 134 : M&L of Sub main wiring with two single core PVC Insulated cable two run of size 2.5 Sqmm multi-strand copper conductor FRLSH cable 1100 volts grade drawing in and including PVC conduit, medium grade not less than 20 mm dia with all conduit accessories and one run of 2.5 Sqmm multi-strand copper conductor FRLSH cable as continuous earth wire including making good disturbed surface to match existing complete all as specified & directed.Note : - Two run of 2.5 Sqmm & one run of 2.5 Sqmm cable and one run of pvc conduit shall be measured as one unit run. (For tube lights) |
| 202 | Item No 135 : M&L of Sub main wiring with two single core PVC Insulated cable two run of size 4 Sqmm multi-strand copper conductor FRLSH cable 1100 volts grade drawing in and including PVC conduit, medium grade not less than 20 mm dia with all conduit accessories and one run of 4.0 Sqmm multi-strand copper conductor FRLSH cable as continuous earth wire including making good disturbed surface to match existing complete all as specified & directed.Note : - Two run of 4 Sqmm & one run of 4.0 Sqmm cable and one run of pvc conduit shall be measured as one unit run. |
| 203 | Item No 136 : M&L ofSub main wiring with two single core PVC Insulated cable two run of size 6.0 Sqmm multi-strand copper conductor FRLSH cable 1100 volts grade drawing in and including PVC conduit, medium grade not less than 25 mm dia with all conduit accessories and one run of 6.0 Sqmm multi-strand copper conductor FRLSH cable as continuous earth wire complete all as specified and directed. Note : - Two run of 6 Sqmm & one run of 6 Sqmm cableand one run of pvc conduit shall be measured as one unit run. |
| 204 | Item No 137 : M&L for cable tray perforated type 45mmx45 mm complete all as specified and directed. |
| 205 | Item No 138 : S&F stair case light LED type, 2w, surface mounted , outdoor type completeall as specified and directed. |
| 206 | Item No 139 : Supply and fixing LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete |
| 207 | Item No 140 : Taking down old unserviceable DBs/Main switches any type/size complete with all accessories and remove from site all as specified & directed. |
| 208 | Item No 141 : Taking down old unserviceableLight Fittings any type/size complete with all accessories and remove from site all as specified & directed. |
| 209 | Item No 142 : Supply and fixing round shape 12 watt 220 volts AC recessed type with high efficiency PMMA diffusersoft glare free light complete with drivers, holders,LED lamp suitable for roof ceiling includingconnecting up with three core flexible copperconductor cable of suitable size complete |
| 210 | Item No 143 : Supply and fixing of Coaxial type cable 16 gauge AWG for PA system incuding size of conduit of size completeall as specified and directed. |
| 211 | Item No 144 : Supply and fix exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 300m complete all as specified and directed. |
| 212 | Item No 145 : Supply and fixing of Women and men sign board for toilets all as specified and directed |
| 213 | Item No 146 : Supply and lay pipe galvanized, “Medium class”, including fittings of dia 50 mm and all as directed. |
| 214 | Item No 147 : Supply and lay pipe galvanized, “Medium class”, including fittings of dia 40 mm and all as directed. |
| 215 | Item No 148 : Supply and lay pipe galvanized, “Medium class”, including fittings of dia 25 mm and all as directed. |
| 216 | Item No 149 : Supply and lay pipe galvanized, “Medium class”, including fittings of dia 20 mm and all as directed. |
| 217 | Item No 150 : M&L for tapping in existing GI / DI pipe lines 150 mm dia and inserting tee of 150x 100 mm and all as directed. |
| 218 | Item No 151 : Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed. |
| 219 | Item No 152 : Dismantling posts or struts (wood, steel or R.C.C.) any section, including taking out embedded portion in Concrete, brick work, masonry, etc. and making good disturbed ground complete all as specified and directed. |
| 220 | Item No 153 : Dismantling Plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings complete all as specified and directed. |
| 221 | Item No 154 : Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed. |
| 222 | Item No 155 : Excavating in post holes (or similar holes) each n exc 0.5 cu. m, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm, in any type of soil complete all as specified and directed. |
| 223 | Item No 156 : M&L Hardcore of gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface complete all as specified and directed. |
| 224 | Item No 157 : Demolition of Brickwork or stone/ boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and directed. |
| 225 | Item No 158 : Taking down Cement plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc. complete all as specified and directed. |
| 226 | Item No 159 : M&L rendering 15mm thick in cement mortar 1:4 on fair faces of brick work or concrete surfaces finished even and smooth with out using extra cement. complete all as specified and directed. |
| 227 | Item No 160 : Complete removal of existing treatment on wall complete all as specified and directed. |
| 228 | Item No 161 : M&L for water proof cement based putty @ 1 Kg (undiluted) per sqm mtr on layers over the plastered/old painted wall after scrapping to prepare the surface even and smooth complete and sandind of the putty surfaces with mechanical wall sander (having mechanical vacuum mechanism) having RPM not less than 1500, sanding pad of 240 grit or above to make the surfaces free from dust (height of bldg/ structure less than 21.00 m from ground) etc by skilled labour as per following steps:- (1) Mix the putty powder by adding water as per manufacturer instructions and mix it with putty mixer with mixing capacity of min 2.5 kg putty per minute.(2) Apply the first coatthe prepared mixer with the help of fully automatic airless spray machine of putty application having flow speed of max 6 ltrs per minute with a maximum pressure 3300 PSI.(3) Allow 6-8 hrs time to dry the putty surfaces complete all as specified |
| 229 | Item No 162 : Material & Labour for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new/old surfaces. as per manufacturer instructions apllied over priming coat with fully automatic airless spary machine of paint application with a flow speed of min 1 ltr per minute having a pressure of 3300 PSI and allow 6-8 hrs to dry the surfaces in both the coats of paint, (height of bldg/ structure less than 21.00 m from ground) completeall as specified and pattern directed. |
| 230 | Item No 163 : S&F 10 mm thick pavertiles out door vitrified tiles area 0.20 to .50 sqm each asin floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 20mm thick screed in CM(1:6) complete all as specified |
| 231 | Item No 164 : S&F Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc.conforming to Fe-410- W(Gde- E-250) quality- B complete all as specified and directed. |
| 232 | Item No 165 : Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161- 1979 grade St.-240 complete all as specified and directed. |
| 233 | Item No 166 : S&F mild steel work as wind ties for roof including securing bolts, posts and struts in fencing including cutting tops to shape as directed , drilling holes, notching for wires etc, flat iron fillets (for securing wire mesh etc) including all necessary drilling, bolting or riveting , etc and similar work confirming to FE-290 Gde-E-165 complete all as specified and directed. |
| 234 | Item No 167 : M&L Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as complete all as specified and directed. |
| 235 | Item No 168 : M&L Pre- painted galvalume aluminum zinc coating GI based Plainsteel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed. |
| 236 | Item No 169 : Material & Labour for providing and fixing stainless steel (Grade 304) railing made of hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of floor or the side of waist slab with suitable arrangement complete all as specified and directed. |
| 237 | Item No 170 : M&L Toughned glass 12mm thick as in hinged doors, partitions automatic doors and similar work including cutting to shape, drilling holes and fixing required complete all as specified and directed. |
| 238 | Item No 171 : M&L 75 mm thick, PCC 1:3:6, type C-2 using 20mm graded stone agg finished even and smooth without using extra cement as in plinth protection complete all as specified and directed.. |
| 239 | Item No 172 : M&L one coat of synthetic enamel pinting over old steel surface over 10 cm width or girth complete all as specified and directed. |
| 240 | Item No 173 : M&L preparation of new or previously untreated steel and iron surfaces of any description n exc 10 cm width or girth when unconnected with other painting or painted in a different tint and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed. |
| 241 | Item No 174 : Removingexcavated materialsexc. 250 m & n exc 500 and depositing were directed complete all as specified and directed. |
| 242 | Item No 175 : M&L for RCC M-25 design mix as in columns , pillars, piers, posts and struts etc. complete all as specified and directed. |
| 243 | Item No 176 : M&L for RCC(Design mix M-25) in beams, cantilevers, bressumers, lintels over 1.50 m span complete all as specified and directed. |
| 244 | Item No 177 : M&L RCC M-20 design mix (using 20 mm graded stone aggregate.) in chajjascomplete all as specified and directed. |
| 245 | Item No 178 : Use and waste formwork to sides of pillars, posts, struts, piers, columns etcsquare or rectanguar complete all as specified and directed. |
| 246 | Item No 179 : Use and waste formwork to sides and soffits of floor beams, roof beams , beam haunchings girders, lintels, cantilevers etc to plain surface complete all as specified and directed. |
| 247 | Item No 180 : Use and waste Formwork to chajjas including edges flat fair finished surfaces of concretecomplete all as specified and directed. |
| 248 | Item No 181 : S&FTMT steel bars 5mmdia and over, up to and including 10mm diain stirrups spcers and binders complete all as specified and directed. |
| 249 | Item No 182 : M&L for brick work with flyash bricks using old size bricks, straight or curved on plan to any radius, built in CM 1:6 as in half brick thick wall complete all as specified and directed. |
| 250 | Item No 183 : M/L rendering 5 mm thick in CM 1:3 on ceiling/ wall concrete surface & finished even & smooth without using extra cementcomplete all as specified and directed. |
| 251 | Item No 184 : S&F Coloured Glazed ceramic tiles in vertical surfaces 350x250mmx7mm /450x350x7mm thickset and jointed in neat cement slurry and pointed in white or coloured cement to match over 10mm thick backing coat in CM(1:4) on fair face of brick or concrete surface complete all as specified and directed. |
| 252 | Item No 185 : M&L Non - skid Ceramic coloured tiles 7 to 8 mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match and including 20 mm thick screed bed in CM 1:4 to recieve tiles complete all as specified and directed. |
| 253 | Item No 186 : M & L Virified Ceramic tiles Dark shade/double charged/ultracharged10 mm thick (square/ rectangular) polished, area of each tiles exceeding 0.42 n exc. 1.00 sqm sqm, etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match and including 20 mm thick screed bed in CM 1:4 to recieve tiles complete all as specified and directed. |
| 254 | Item No 187 : S&F coloured Powder coated aluminium (minimum thickness of powder coating 50 micron) work for doors, windows, ventilators and partitions (Fixedportions) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDMrubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-Charge. |
| 255 | Item No 188 : Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 50 x 100 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms)fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2 , modules of elasticity 900 N/mm2and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant complete all as specified and directed. |
| 256 | Item No 189 : Factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of 30mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2 , modulus of elasticity 850 N/mm2and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction. |
| 257 | Item No 190 :S&FButt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodisedtype B-21 complete all as specified and directed. |
| 258 | Item No 191 : S&F 150 mm long extruded alu alloy handles, fabricated type, anodised complete all as specified and directed. |
| 259 | Item No 192 : S&F 300mm aluminium alloy, anodised, sliding door bolt with hasp, staple bolt type and fixing clips of sheet cast or extruded section and fixing bolts and sliding bolts of extruded section or cast aluminium alloy complete all as specified and directed. |
| 260 | Item No 193 : S&F 200mm longAluminium,anodized barrel tower bolts of extruded section and fixed complete all as specified and directed. |
| 261 | Item No 194 : S&F Stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aparture 1.40 mm and fixed with stainless steel wire staples complete all as specified and directed. |
| 262 | Item No 195 : S&F 5.5mm thick sheet glass ordinary quality and glazing complete in square nexc 0.50sqm each complete all as specified and directed. |
| 263 | Item No 196 : S&F 5.5 mm thick frosted glass, ordinary quality and glazing with oil putty of any size pane complete all as specified and directed. |
| 264 | Item No 197 : M&L Vitreous China Urinal, Half stall type, whitewith grating and union for discharge pipe (excluding flushing cistern, flush pipe and waste pipe)including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and Union for discharge pipe complete all as specified and directed. |
| 265 | Item No198 : S&F Urinal spreader of brass CP for fixing with 15 mm dia pipe. (Minimum weight 60gms) complete all as specified and directed. |
| 266 | Item No 199 : S&F Health faucet (ABSBody) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 meter long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified and directed. |
| 267 | Item No 200 : S&Fcascade duel flush one peace inbuilt flushing cistern vitreous china wash down water closet pan padestel pattern white including softseat cover, connection pipe to union of flushing cistern, inlet and overflow pipes,connecting anti-syphonage pipe with PVC flush pipe of 32mm diawith mild steel chromoum plated hinging and \"P\" or \"S\" trap device complete all as specified and directed. |
| 268 | Item No 201 : S&FVitreous China wash basin, below/ above counter top type size 550x440mm white, excluding taps, waste, chain and plug and porcelain stopper but including bracketsincluding Brass chromium plated waste coupling 32mm bore, Waste pipe PVC 32mm bore, complete all as specified and directed. |
| 269 | Item No 202 : S&F 15 mm bore galvanized steel tubing, medium grade galvanised with all fittings, fixed to walls and ceilings or laid in floors incl cutting chasing and making goodcomplete all as specified and directed. |
| 270 | Item No 203 : S&F 20 mm bore galvanized steel tubing, medium grade galvanised with all fittings, fixed to walls and ceilings or laid in floors complete all as specified and directed. |
| 271 | Item No 204 : S&FSS Chromium platedtoilet paper holderincluding fixing arrangement complete all as specified and directed. |
| 272 | Item No 205 : S&F Chromium platedsoap dishincluding fixing arrangement complete all as specified and directed. |
| 273 | Item No 206 : M&L PVC Nahani trap long neck 100 mm dia, with stainless steel grating including jointing to waste pipe fixed in cement concrete type B1, 1:2:4 complete all asspecified and directed . |
| 274 | Item No 207 : S&F15mm bib taps, fancy type chromium platedwith crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed. |
| 275 | Item No 208 : S&FBrass Chromium plated WHB/ wall mixer for mixing hot & cold water screwed down for 15mm bore iron pipecomplete all as specified and directed . |
| 276 | Item No 209 : S&F 15 mm bore angle/ stop cock, cast copper alloy fancy type chromium plated screwed down high pressure with crutch & butterfly handle screwed both ends for iron pipe and fixed complete all as specified and directed. |
| 277 | Item No 210 : S & F Rotational moulded poly-ethylene multilayer water storage tanks (cylinderical vertical with closed top) 500 litres capacity, triplr layer in construction white in colour hoisted and fixed in position complete all as specified and directed. |
| 278 | Item No 211 : S&F for20mm ball valves high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed. (Minimum weight 15mm-142gms/ 20 m m - 210 gms / 25mm-455gms/ 40mm - 690 gms) complete all as specified and directed. |
| 279 | Item No 212 : S & F liquid soap container of PTMT fixed with incl chromium plated brass screw and wooden /plastic cleat complete all as specified and directed. |
| 280 | Item No 213 : S&F 110mm borePVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in fixed to walls. |
| 281 | Item No 214 : S&F 110mm borePVC (SWR) bends any radius complete all as specified and directed. |
| 282 | Item No 215 : S&F 110mm borePVC (SWR) junction single, (single T) equal or unequal any radius complete all as specified and directed. |
| 283 | Item No 216 : S&F 110mm borePVC (SWR) junction double, (double T) equal or unequal any radius complete all as specified and directed. |
| 284 | Item No 217 : S&F 110mm borePVC (SWR) cowl any radius complete all as specified and directed. |
| 285 | Item No 218 : S&F PVC (SWR) pipe inner dia 75mm single socketed in any length with rubber ring joint laid on wall/ceiling or laying in floors complete all as specified and as directed |
| 286 | Item No 219 : S&Ffor 75 mm dia PVC (SWR ) bends and radius complete all as specified and directed. |
| 287 | Item No 220 : S&F 75mm borePVC (SWR) junction single, (single T) equal or unequal any radius complete all as specified and directed. |
| 288 | Item No 221 : S&F PVC connections 15 mm size with brass nuts both side of length 600 mm complete all as specified and directed . |
| 289 | Item No 222 : M&L Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long complete all as specified and directed. |
| 290 | Item No 223 : S & F CP Brass chromium plated tubular towel rail 20 mm dia 60 cm long between flanges complete all as specified and directed. |
| 291 | Item No 224 : M&L for Providing water proofing treatment over cleaned roof surface with super thermo APP modified water proofing memberanecomprising of the following for Non approachable roofs complete all as specified and directed. |
| 292 | (a) : Apply oil bound bitumen primer @ 0.30 Litre / Sqm manufactured by the same agency as that of APP with density of 0.87 to 0.89 Kg / Litre at 25 degree Celsius on the prepared dry roof surface complete all as specified and directed. |
| 293 | (b) : M&L APP polymeric membrane min weighting 3kg/sqm and minimum 3mm thick reinforced with polyster non woven fabric(wt not less than 150 gms/sqm laid on primed surfaces by torch application on method complete all as specified and directed. |
| 294 | (c) : M&L for preparation of new surfaces of any description not otherwise described over 10cm width or girth and applying two coats of solar reflective aluminium paint @ 0.10 kg/sqm membrane surfaces complete all as specified and directed. |
| 295 | Item No 225 : S & F looking mirror of 5mm thick of selected quality glass, mounted on 5mm thick PVC fiber boardand fixed to wooden plugs with chromium plated brass screws and cup washers complete all as specified and directed. |
| 296 | Item No 226 : M&L Cudappah stone slab onplatform/shelf 30-35mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match over and including 20mm thick screed bed in CM 1:6, the shade of the slab including rubbing and polishing and cutting of holes for gas pipe complete all as specified and directed. |
| 297 | Item No 227 : S&FFactory made single/doubleextruded WPC (Wood Polymer Composite) solid decorative prelam both side flush door, cabinet, shutter etc18mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2 , modulus of elasticity 850 N/mm2and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture pr oof and fire retardant and fixing with necessary arrangement complete all as specified and directed. |
| 298 | Item No 228 : M&L Soakage wells excavation, in any type of soil, foundation in PCC 1:3:6, walls of honey combed masonry with top ring of M25 concrete including intercepting chamber and screen chamber made of Brick masonary in CM, RCC cover slab in M25/ SFRC cover, interconnecting pipes of RCC/DWC complete filled with brick bats of size 1.80M x 3.0 M depth complete all as specified and directed. |
| 299 | Item No 229 : S&F Decorative Type Dholpur stone Jafri wall 32-35mm thick incl decorative verticle post with encluding grooved etc to fix Jafri Wall and embedded to existing brick wall with color pigment to match the existing surfaces complete all as specified and directed. (Incl necessary MS Clamp Nut Bolt washer etc). |
| 300 | Item No 230 : Single seater Lounge fix chairof size:-600 ± 10 W X 700 ± 10 D X 785 ± 10 H, Seat height:-435 mm, Flexi Back. The side frame assembly is fitted to the two ends of the connecting beam assembly to form the leg-cum-armrest assembly. It is made of a MS. E.R.W. tube dia. 38mm and 1.4 mm thick and black powder coated. The ends are fitted with ABS moulded end caps. Tie Member:-It is the connecting beam assy which holds the two side frames to each other 2 nos. tie members are used to connect with the side frames , The tie-member is made of MS. E.R.W. tube dia 38X1.4mm thick and black powder coated , angles welded to mount the seat and back, Seatrest Assembly:- The seat rest assembly consists of a fabricated inner-frame assembly moulded. The product should bear IGBC Green Pro certificate for product category, Green co. and Green Gurard.And should be BIFMA member having AIOTA (All India Occupational Therapists Association) for STORAG FURNITURE range for ergonomic design. Make:- Methodex, Godrej, Herman Miller |
| 301 | Item No 231 : Three seater Lounge fix chair, Chair of size 1600 10 wx 700 100X785:10 H. Seat height: 435 Flexi Back. Three seater Lounge fix chairChairof size:-1600 ± 10 W X 700 ± 10 D X 785 ± 10 H, Seat height:-435 mm, The side frame assembly is fitted to the two ends of the connecting beam assembly to form the leg-cum-armrest assembly. It is made of a MS. E.R.W. tube dia. 38mm and 1.4 mm thick and black powder coated. The ends are fitted with ABS moulded end caps. Tie Member:-It is the connecting beam assy which holds the two side frames to each other 2 nos. tie members are used to connect with the side frames , The tie-member is made of MS. E.R.W. tube dia 38X1.4mm thick and black powder coated , angles welded to mount the seat and back, Seatrest Assembly:- The seat rest assembly consists of a fabricated inner-frame assembly moulded with Polyurethane foam having density 45 +/- 2 Kg./cm3, The complete moulded seat rest assembly is covered with a replaceable fabric upholstery cover, Seat Size:- 520(W) X 500(D) X 60 mm thick. Backrest Assembly:-The backrest assembly is flexing type and consists of a fabricated inner-frame assembly moulded with Polyurethane foam having density 45 +/- 2 Kg./cm3 ,The complete moulded backrest assembly is covered with a replaceable fabric upholstery cover ,Back Size:- 520 (W) X 590 (H) X 60mm thick . The product should bear IGBC Green Pro certificate for product category, Green co. and Green Gurard.And should be BIFMA member having AIOTA (All India Occupational Therapists Association) for STORAG FURNITURE range for ergonomic design. Make:- Methodex, Godrej, Herman Miller |
| 302 | Item No 232 : S & F for MCB DP rated capacity 20 to 32 Amps,240 Volts breaking capacity 10 KA, \"C\" curve complete all as specified and as directed. |
| 303 | Item No 233 : S & Ffor MCB Single pole rated capacity 6-32 Amps, 240 Volts breaking capacity 10 KA, \"C\" curve complete all as specified and as directed. |
| 304 | Item No 234 : S & F for wall mounted LED tube light fitting 20 watts batten for surface mounted, anodized extruded aluminium housing, high transmissitivity diffuser, high lumen ouputboxtype fitting,luminous efficacy not less than 120 lumen/watt230 volts and LED Chip, Diver and Housing shouldof same make with warranty option of 2 years from date of installation complete with all accessories internally pre wired andnecessary mounting arrangements, provision of new 3 core multistrandedcopper conductor and flexible conduit of size 23/0.193 from ceiling rose to fitting complete all as specified and as directed.Make : Philips or equivalent in OSRAM/GE |
| 305 | Item No 235 : S & F for Energy saving new generation environmental friendly long life versatile presure die cast aluminium IP 66 for security light fitting luminaire with high power LEDs as light source and electronic driver of capacity 35 watts(or nearest standard size) , luminous efficacy not less than 110 lumen/watt, LED Chip, Diver and Housing shouldof same makewith pre wired andnecessary mounting arrangements and provision of 2.5 sq mm three core copper conductor cable multi stranded from ceiling rose to light fitting including necessary dia GI pipe medium grade bracket 1.5 mtr long bend to required shape with clamps, nut, bolts complete all as directed by Engineer- in-charge. Make : Philips or equivalent in OSRAM/GE |
| 306 | Item No 236 : S & F new generation LED Highbayof capacity 80 wattwith aluminium PDC housing and toughened glass to ensure IP 66 luminous efficacy not less than 130 lm/w and including hanging arrangement from the ceiling at any height.LED Chip, Diver and Housing shouldof same makeetc complete with all accessories prewired and including connecting up with three core flexible copper conductor cable with suitable size.Make : Philips or equivalent in OSRAM/GE |
| 307 | Item No 237 : S & F for energy efficient exhaust fan of 300 mm sweep made of metal body complete with louver with bolts nuts and washers, bolt , embedded in the wall including provision of PVC flexible copper cablethreecore from ceiling rose to exhaust fan forconnection and making suitable size ofhole to existing brick wall for fan basecompelte all as specifiedand directed. |
| 308 | SCHEDULE \"A\"(Schedule of credit )Schedule of Credit Rs 316942.00 (Minus) inserted by the MES. (Note : Credit amount shall be deducted manually to arrive net amount) |
| SR No | FileName | File Description |
| 1 | Click here to download tender document | Tender Documents |
| 2 | Click here to download tender document | Tender Documents |
| 3 | Click here to download tender document | Tender Documents |
| 4 | Click here to download tender document | Tender Documents |
We are a group of professionals specializing in custom software development, web development, mobile app development, IOT base solutions, web design, graphics & Enterprise solutions provid.
Copyright © 2025 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
