Name of Work:- Ward-84 Rajnagar Me Sec-3 Me Yogesh Kumar Ke Quarter Ki Marammat & Rangayi Putayi Ka Karya.
Sl. No.
Item Description
1
Scraping old white or colour wash including disposal of refuse as directed by the Engineer-in-charge within a distance of 60 metre (200 feet).AS PER PWD SOR 2022 17.12.
2
Dismantling existing plaster includingdisposal of refuse as directed by theEngineer-in-charge within a distance of 60metre (200 feet).
3
12 mm thick plaster with cement and coarse sand of1.25 fineness modules in (1:4) over brick work minimum thickness not to be less than 1 cm including supply of all material, labour, tools & plant etc required for proper completion of the work. (AS PER PWD SOR 2022 PAGE NO 36 SI NO 13.11 NEW
4
S/L Birla Putty including labour, tools, plant etc required for proper complition etc all complete as per specification or direction by engineer in charge.(OLD SURFACE)
5
Finishing wall with weather coat by premium acrylic exterior paint applied @ 3.28 ltr/10 sqm (Asian or Berger Brand) of approved make and quality on wall with two or more coat to give an even shade including a priming coat with cement primer of approved brand and manufacturer exterior primer applied @ 2.20kg/10 sqm after thoroughly brushing the surface free from mortar dropping and other foreign matters and sand papered smooth including supply of all materials, labour, Tools & plants etc. required for proper completion of the work..AS PER PWD SOR 2022 662 NEW ITEM .
6
Painting or varnishing work in small areas ornew wood work with one coat (upto onesquare metre of ready mixed priming paint andone coat of approved superior quality readymixed paint or varnish including supply of allmaterials, labour, Tools & plants etc. requiredfor proper completion of the work. Paint to beused should confirm the ISi no. 103-1950.As in item (641) above but for every coat afterfirst coat.
7
S/L Cement Concrete (1:2:4) with 2 cm gauge stone grit coarse sand and cement including all materials,labour,tools, & plant etc all completed as per the direction of engineer - in - charge.
8
M.S. or iron work of small sizes and section such as holding down bolts, hold fast, tie rods grating etc. wrought to required from including supply of steel bolts, nuts wastage etc. and their fixing required for proper completion of the work.PWD SOR 2022 10.21.
We takes all possible care for accurate & authentic tender information, however Users
are requested to refer Original source of Tender Notice / Tender Document published by
Tender Issuing Agency before taking any call regarding this tender.
