|
| 1 | M&L for comprehensive maintenance /repairs or periodical checkwith skilled crane repairer to all component of EOT crane 2 Ton capacityincluding limit switches vertical and horizontal motion and longitudial motion and load testing, greasing/ lubricationto all movable parts, rail track line of crane, adjustment/ rectification of flexible cable with cable carrier/ replacement of PVC cable carriers, rectification/ tightening of all electrical connections at main EOT panels and connected electrical drive motors, checking and rectification of brake system with replacement of tie rod , replacement of gear oil/ replacements of gasket/oil seal and required nut and bolts checking/rectificationof portable/ pendent control panel and checking/rectification of cranes light pointsfor smooth functioning and cleaning and dusting of all components for 3 time in each month complete all as specified and directed. |
| 2 | Note-(i)All spares parts/ item/stores reuired for replacement shall be measuredand saperately as respective sch \"A\" ser items.(ii) Srl item No 1in abovelabour onlycharges has been considered. |
| 3 | S&F in Replacement of Lever Type Limit Switch 2 Way Type LS /2SH2 in IP54 enclosure with two Contacts for 2 Ton crane complete all as specified anddirected by Engr-in-Charge. |
| 4 | S&F in Replacement of Rotary Type Limit Switch Gear Ratio 48:1 with 2 N.O.+2 N.C. Contact in IP54 Enclosure all is Directed By Enggr-in-charge. |
| 5 | S&F in replacement of electromagnetic break 200 mm 415 V AC supply for hoist motion complete all as specified and directed.. |
| 6 | S&F in Replacement of Electro hydraulic thruster operated brake suitable for hoisting motion/cross travel motion for crane 2Ton crane, 415V, AC supply complete all as Directed. |
| 7 | S&F in Replacement of Electro hydraulic thruster operated brake suitable for long travel motion for crane 2 Ton crane, 415V, AC supply complete all as Directed. |
| 8 | S&F in Replacement of Electro Hydraulic Thruster Break shoe 250 mm and 18 Kg for Hoist Motion/cross travel motion all as Directed. |
| 9 | S&F in Replacement of Electro Hydraulic Thruster Break shoe 250 mm &18 Kgfor long travel motion all as Directed. |
| 10 | M&L for repairing of Helical Gear Box for Hoist Motion Horizontal Type opening and removing Hoist Gear Box Top Cover by unscrewing Nut Bolts , side shaft plates etc & replacement of damage oil Seal , gaskets of suitable size and replacement of gear oil after washing flushing & cleaning gear Box Chamber completely by kerosene oil,and refixing the same as directed.Note : ( Gear oill will be measured & Paid separately) |
| 11 | M&L for repairing of Helical Gear Box of L.T. & C.T. Motion Vertical Type for 2 ton to 15 ton crane and opening and removing of LT & CT Box Top Cover by unscrewing Nut Bolts , side shaft plates etc. Replacement of Damage Oil Seal , Gaskets of Suitable size and replacement of Gear Oil after washing flushing & cleaning Gear Box chamber completely by kerosene Oil and refixing the same as directed. Note :( Gear oil will be measured & paid separately). |
| 12 | S&F in replacement of Heavy duty Resistance Box Naturally Air Cooled Punch steel Grid type suitable for 5 to 7.5 HP Slip Ring Motor RV-260,RA-27.7 4 step 10 Minutes Rating Balance type in M.S.Sheet Enclosure ( Zinc Plated) in well ventilated Housing. |
| 13 | S&F in replacement of Heavy duty Resistance Box Naturally Air Cooled Punch steel Grid type suitable for 3 H.P. SlipRing Motor RV-90,RA-12 3 step 10 Minutes Rating Balance in M.S Sheet Enclosure ( Zinc Plated) in well ventilated Housing . |
| 14 | Supply and filling Gear Oil complete all as specified and directed. Make : Servo/HP. |
| 15 | S&F in replacement PVC Flexible Cable 1.5 sqmm12 cores complete all as specified and directed. |
| 16 | S&F in replacement of stainer wire 6 mm with end bracket 2 Nos for E.O.T Crane End Carriage side welded including cutting welding complete all as specified anddirected. |
| 17 | M&L for power contactor 3 pole 23 Amp, 110volt complete all as specified and directed. Make BCH/Legrand. |
| 18 | M&Lfor overload relay 1.0 to 1.4 Amp complete all as specified and directed by Engr-in-charge.Make- BCH/Havells/Legrand. |
| 19 | Dismantling/strip opening micro drive box complete with rectifier transformer arrangement, megnatic disc both side coupling for remotting both side ends of driving shaft (gear box coupling side and braking arrangement coupling side) making multi key arrangement on both the shaft and coupling (Teeth system) to avoid any kind of play in coupling and shaft including replacement of 04 Nos carbon bushes, replacement of o2 Nos gun metal bushes including making oiling arrangement in bushes and side covers of bushes/housing of micro drive reassembling/testing complete (crane capacity 2Ton) all as specified and directed.. |
| 20 | M&L for Repair/replacement of Push Button Station 8 way and replacement of unserviciable Push Button with Element. |
| 21 | Dismantling carefully motor electric squirrel cage induction type and carrying out to workship forrewinding with super enamelled copper windings wire of suitable size so as to provide rated output at rated speed complete including all other winding materials such as leathroid paper,bamboo strips,PVC insulation tape,cotton tape, PVC sleeves,insulation varnish etc complete including assembling testing and comprising of motors of 3 phase 400-440 Volts, 50 cycles/second, 1440 RPM o3HP to 7.5HP capacities complete all as specified and re-fixing.Note :- (Quotedrate shall deemedto be included for disconnecting and refixing in position) |
| 22 | All as per srl item No 20 here-in-before but 3 phase 400/440 volts 50 cycles/second 1440 RPM of 3 HP to 5 HP capacity complete all as specified and directed. |
| 23 | M&L for break /compresure oil for EOT crane 2Ton capacity complete all as specified and directed by engr-in-Charge.Make Survo/HP. |
| 24 | M&L for grease for EOT crane of 2 Ton capacity complete all as specified and directed by engr-in-Charge.Make Survo/HP. |
| 25 | M&L for replacement of flexible coupling suitable perfact allignment beetween motor and driven machine with greasing and replacement of suitable nuts and bolt complete all as specified and directed by Engr-in-charge. |
| 26 | M&L for replacement of tie rod of break system and nut, bolt complete all specified and directed by engr-in-charge. |
| 27 | S&F in replacementof Protective Cum Control panel for 2 Ton EOT crane indoor type, made out of CRCA sheet 2mm thick compatmental type dully powder coated , self standing /wall mounting and complete internal wiring by PVC flexible copper cable and ferruels. Control wiring not less than 1.5sqmm and power wiring not less 2sqmm with incoming and outgoing cable connection and comprising the following items (Make: L&T/ USGC/ ABB / C&S / Siemens). |
| 28 | a). MCCB 3P 80A (relay range 63-80A). Cat No. :- CM9051700JO Make: - L&T / Siemens/ BCH. Qty : - 1Nos.b). MCB 3P 63A 415V AC Cat No. :- BB3063OC Make: - L&T / Siemens/ BCH. Qty : - 2Nos.c). MCB 3P 16A 415V AC Cat No. :- BV30160B Make: - L&T / Siemens/ BCH. Qty : - 3Nos.d). MCB 2P 4A 415V AC Cat No. :- BV20040C Make: - L&T / Siemens/ BCH. Qty : - 2Nos.d). MCB 2P 6-10A 415V AC Cat No. :- BV20060C Make: - L&T / Siemens/ BCH. Qty : - 2Nos.M&L in replacement of Step Down Transformer double bound type 415/110V AC 500VA complete all as specified & directed by Engr-in-Charge. (Make: Crane Control / USGC / Micro). M&L in replacement of Three Pole Power Contactor 3 phase 415V AC3 32 Amp. ML-2 with 2 N.O. + 2 N.C.Aux Contect Coil Voltage 110V AC complete all as specified & directed by Engr-in-Charge. (Make:- L&T Cat Part No.S.S90701 or equivalent Siemens/BCH).Qty : - 5Nos.M&L in replacement of Three Pole Power Contactor 3 phase 415V AC3 25 Amp. ML-1.5 with 2 N.O. + 2 N.C.Aux Contect Coil Voltage 110V AC complete all as specified & directed by Engr-in-Charge. (Make:- L&T Cat Part No.SS91851 or equivalent Siemens/BCH).Qty : - 5Nos.Thermal Overload relay ML-2 relay range 6-10A Cat No. SS9414200VO Make:- L&T Qty : - 2Nos.Thermal Overload relay ML-2 relay range 3-5A Cat No. SS9414100SO Make:- L&T Qty : - 3Nos.Thermal Overload relay ML-2 relay range 9-15A Cat No. SS9414200BO Make:- L&T Qty : - 1Nos.Single Phase Preventer 3 Phase 415V AC Make Minilec Qty : - 1Nos.Step Down Transformer 415/220VAC 1KVA Double Bound Make: - USGC/Micro/GPS cranes. Qty : - 1Nos.Connector Block of Sizes. 1 Set.Crane operate rotory swich ON/OFF Cat. No.:- 61002 Make:- Selzer / L&T Qty : - 2Nos. |
| 29 | M&L for repairing of wheel for LT and CTof 2 to 15 ton crane and removing bearing Cover by unscrewing Nut Bolts , side shaft plates etc & replacement of gaskets of suitable size and greasing of bearing after washing flushing & cleaning bearing and casing Chamber completely by kerosene oil,and refixing the same as directed by Engineer-in-charge. Note : ( greasing will be measured & Paid separately) |
| 30 | M&L for cleaning of DG sets of capcity 125 KVAby the cleaning of wholeDG setswith the help of vaccum cleaner and other related works all as specifieddirected by Engr-in-Charge |
| 31 | All as per Srl Item No 28 here-in-before but of cap20-40 kVA of any Make& Type . |
| 32 | All as per Srl Item No 28 here-in-before but of cap7.5-10 kVA of any Make& Type . |
| 33 | S&F in replacementdiesel filter element with \"O\" rings suitale for DG set ofcap 125 kVA of any make and type . |
| 34 | S&F in replacement diesel filter element with \"O\" rings suitale for DG set of cap 20-40 kVA of any make and type . |
| 35 | S&F in replacement diesel filter element with \"O\" rings suitale for DG set of cap 7.5 kVA of any make and type . |
| 36 | S&F in replacement Engine oil filter with by pass filter element with \"O\" rings suitable for DG set of cap 125 kVA of any make and type . |
| 37 | S&F in replacement Engine oil filter with by pass filter element with \"O\" rings suitable for DG set of cap 20-40 kVA of any make and type . |
| 38 | S&F in replacementEngine oil filter with by pass filter element with \"O\" rings suitable for DG set of cap 10 kVA of any make and type . |
| 39 | S&F in replacement Air filter element suitale for DG set of cap 20-40 kVA of any make and type . |
| 40 | S&F in replacement Air filter element suitale for DG set of cap 7.5 kVA of any make and type . |
| 41 | S&F in replacement Fan belt suitale for DG set of cap 20-40 kVA of any make and type. |
| 42 | S&F in replacement Fan belt suitale for DG set of cap 7.5 kVA of any make and type |
| 43 | S&F in replacement Rubber hose pipe set with clamp suitale for DG set ofcap 20-40 kVA of any make and type . |
| 44 | S&F in replacement Rubber hose pipe set with clamp suitale for DG set of cap 7.5 kVA of any make and type . |
| 45 | S&F in replacement pouring in sump/topping up of Engine oil of grade 15W-40/20W-50 in engine . |
| 46 | M&L in replacement coolant for radiator of any make any type DG set at various loactions all as directed by Engr-in-charge. |
| 47 | S&F in replacementbattery lead of copper conductor 25 sqmm single core 1.5 mtr long fitted with btylead terninalone side and other side with brass ternminal,clapms, copper lugs and connection as directect by Engr-in- Charge. |
| 48 | Supply & pouring of Electrolyte for lead acid battries in sealed container all as directed by Engr-in-charge. |
| 49 | Disconnectingof radiator from engine of DG setsofcapacity 20/40 kVA , taking it to workshop for overhauling ,cleaning, descaling with restore plus solution ,welding and brazing as required for repair of water leaking, refixing it at site duly repaired all as directed by Engineer -in-Charge. |
| 50 | All as per srl Item No. 47 here-in-before but of Cap 7.5 kVA complete |
| 51 | M&L for Cleaning of fuel tank both internal & external by removing all the dust/sadiments etc incl writing of tank cap, date of cleaning and next due date of cleaning incl replacement of fuel cap and replacement of fuel pipe (tank to DG set) complete for Cap 20/40 kVA of any make & type all as specified and directed by Engr-in-charge. |
| 52 | All as per srl Item No. 49 here-in-before but of cap 7.5 kVA |
| 53 | S&F in replacement of water pump assy of DG set cap 20/40 kVA of any make & type all as directed by Engr-in-charge |
| 54 | All as per srl Item No. 51 here-in-before but of Cap 7.5 kVA complete |
| 55 | Taking out FIP from DG set ofcap 20/40 kVA of any make & type, transportation to authorised service centre for overhauling and re-calibration and re-fixing to DG set including replacement of necessary spare parts such as delivery valves, plunger \"O\" ring, spring, etc. complete all as specified and as directed. |
| 56 | All as per srl Item No. 53 here-in-before but of Cap 7.5 kVA complete |
| 57 | S&F in replacement of Fuel injector pipe set of suitable number & length complete for DG set of cap 20/40 kVA of any make & type all as directed by Engr-in-charge. |
| 58 | All as per srl Item No. 55 here-in-before but of Cap 7.5 kVA complete |
| 59 | Rapair and overhauling of self starter 12 V of any DG set (spare parts will be measured and paid separately) |
| 60 | S&F field coil |
| 61 | S&F armature rewinding |
| 62 | S&F carbon brushes |
| 63 | S&F Clutch bushes |
| 64 | S&F pinion assy |
| 65 | Rapair and overhauling of self starter 24 V of any DG set (spare parts will be measured and paid separately) |
| 66 | S&F field coil |
| 67 | S&F armature rewinding |
| 68 | S&F carbon brushes |
| 69 | S&F Clutch Bushes |
| 70 | S&F pinion assy |
| 71 | M&L for Battery charger alternator assy12 V engine mount with replacement of rectifire voltage regulator, diode plate, carbon brushes etc complete all as specified and as directed. |
| 72 | M&L for Scrapping of old paint from DG set of any cap, type & make , preparation of old painted surfaces for repainting and M&L for spray painting to DG set of any capacity with synthetic enamelled paint of superior quality over a coat of red oxidedafter scratching the old paint, making the surface smooth with sand paper etc. writing letter SM No/MES No, DG capacity & other by paint or glossy tapes complete all as specified and directed by Engr-in -Charge. |
| 73 | M&L for Taking out unserviciable door lock incl all hinges of DG set canopy and M&L new lock with keys and all hinges as per sampleincluding wleding work by providing MS angles/channels whereever required complete to make the enclosure good looking & doors to operate smoothly all as directed by Engr-in-charge. |
| 74 | M&L for replacement of MS coupling with new coulping rubber bush /rubber disc by taking coupling from engine and generator/alternator joint of 20/40 kVA Cap DG set of any make & type complete all as specifies and as directed. |
| 75 | All as per srl item No. 72 here-in-before but of cap 7.5 kVA |
| 76 | S&F in repair asbestos rope 6 mmdiawrapped over the exhaust pipe complete |
| 77 | S&F in repair anti vibration pads suitable for 7.5 to 63 kVA DG setcomplete all as specified and as directed by Engr-in-Charge. Make : Dunlop or technocommercially equivalent in other makes. |
| 78 | M&Lforpanel board wiring in replacement with 4 sqmm S/C multistranded copper wire cable, complete all as directed by Engineer -in- Charge. |
| 79 | S&F in replacement battery Charger 12 Volts , 6 amps, complete all as directed by Engineer -in-Charge. |
| 80 | S&F in replacementAVR (Automatic Voltage Regulator) of DG set of capacity 20/40 kVA of any make & typeall as directed by Engineer-in-Charge Make-Kirloskar or equivalent |
| 81 | All as per srl Item No. 77 here-in-before but of cap 7.5 kVA |
| 82 | S&F in replacement Oil pressure Guage by replacing of old onesuitable for 7.5-63 kVA DG set of any Make DG set. |
| 83 | M&L for Disconnecting incoming / outgoing cable connection from alternator of 20/40 kVA DG set and taking out from DG set room checking carefully and transporting to auth workshop for repair and rewinding of alternator dismentling into parts and cutting the burnt/damaged copper winding wire from alternator / stator cleaning slots and rewinding the stator/alternator with super enamelled copper winding wire of existing gauge & size and insulation paper etc complete varnishing of rewinded alternator replacement of carbon brush set bearing set etc complete and transporting the alternator to DG set room coupling with DG set and testing complete include water load test all as specified and directed by Engr-in-charge.NOTE: All neccessary T&P for dismantling,transporting and installation cost is deemed in this work |
| 84 | All as per srl Item No. 81 here-in-before but of cap7.5 kVA |
| 85 | S&F in repairs Battery lead acid 12 volt DC, 120 Ah to be fitted on DG set including connecting S/C copper leadof size 10 Sqmm dia with two nos of bty terminal complete all as specified and directed. |
| 86 | S&F in repairs Battery lead acid 12 volt DC, 100 Ah to be fitted on DG set including connecting S/C copper leadof size 10 Sqmm dia with two nos of bty terminal complete all as specified and directed. |
| 87 | S&F in replacement of controller including relays, PCBs & mimic visual displaycomplete with ON/OFF switches and phase indicators complete for 20/40 kVA DG set of any make & type all as per specified and as directed. |
| 88 | All as per srl Item No. 84 here-in-before but of cap7.5 kVA |
| 89 | Supply, fixing and making connections in repairs Hour meter 220-240V, AC suitable for any type & cap DG sets complete all as specified and directed. |
| 90 | S&F battery ternimal of brass with 3 mtr long, 16 sq mm copper conductoe cable, bolt type (+ve red sleeve, -ve black sleeve)suitable for 180 AH battery . |
| 91 | S&F battery ternimal of brass with 3 mtr long, 16 sq mm copper conductoe cable, bolt type (+ve red sleeve, -ve black sleeve) bolt type suitable for 120 AH battery . |
| 92 | S&F in replacement self starter 24 Volts DC for Diesel engine driven water cooled Make :- Kiroskar |
| 93 | S&F in replacement self starter 12 Volts DC for Diesel engine driven water cooled Make :- TVS Lucas |
| 94 | M&L for painting for complete overhead crane & it including writing of its cap in bold letters as per excisting patten complete all as specified & directed. |
| 95 | S&F in replacement of multifunction relay in control panel to display all parameter of DG set of Capacity 7.5 to 63 KVA |
| 96 | S&F in replacement of MCCB 4 pole 250 Amps 36 KA, 415 vots AC, 50 HZ with adjustable thermaladjustable magnetic releaseICS = 100 % ICU setting complete including spreaders,thimbling carrying out modification in existing panel to MCCB all as specified of following rating:- |
| 97 | All as per srl Item No. 94 here-in-before but 200 Amps 36 KA |
| 98 | All as per srl Item No. 94 here-in-before but 160 AMP 27 KA |
| 99 | All as per srl Item No. 94 here-in-before but 125 AMP 27 KA |
| 100 | All as per srl Item No. 94 here-in-before but 100 AMP 10 KA |
| 101 | All as per srl Item No. 94 here-in-before but 63 AMP 10 KA |
| 102 | S&F in replacement Digital Ammeter 0 - 500 Ampsuitable range of CTs - make: Schneider , cat part no : 30002385 |
| 103 | S&F in replacementDigital Voltmeter 0 - 500 V ,Make : make: Schneider , cat part no : 30002386 |
| 104 | S&F in replacementIndicator lamp neon type red, yellow & blue complete all as spd and directed. |
| 105 | S&F in replacementfor XLPE insulated, armoured, heavy duty electric cable with aluminum conductor 35 sq mm 3.5 core, 1100 volts grade, 3.5/4 in replacement of the following sizes cross-sectionl area including taking down of old UNSV cable |
| 106 | All as per srl Item No. 98 here-in-before but 25 sq mm 3.5 Core |
| 107 | All as per srl Item No. 98 here-in-before but 16 sq mm 4 Core |
| 108 | All as per srl Item No. 98 here-in-before but 10 sq mm 4 Core |
| 109 | All as per srl Item No. 98 here-in-before but 95 sq mm 3.5 Core |
| 110 | All as per srl Item No. 98 here-in-before but 150 sq mm 3.5 Core |
| 111 | All as per srl Item No. 98 here-in-before but 120 sq mm 3.5 Core |
| 112 | Excavation in trenches n. exc. 1.5 mtr wide and n. exc. 1.5 mtr in depth for foundation of pole and laying of UG cable and getting out in any type of soil complete all as specified and directed. |
| 113 | Returning, filling in, including spreading, watering and well ramming in layers not exceeding 25 cm thick in hard dense soil. |
| 114 | Removing excavated material (soil) to a distance not exceeding 50 mtr and depositing where directed at a level not exceeding 1.5 mtr above the starting point. |
| 115 | Sand cushioning to under ground cable complete all as specified in clause 19.75 of SSR Part - I. |
| 116 | Brick covering with equal to length of brick as mechanical protection to cable with well burnt sub class \"B\" bricks laid as directed. |
| 117 | S&F in repair aluminium lugs of suitable of size 25 Sqmm to becrimped properly to LT cable with crimping tool complete all as spd and directed. |
| 118 | S&F in repair aluminium lugs of suitable of size 35 Sqmm to becrimped properly to LT cable with crimping tool complete all as spd and directed. |
| 119 | S&F in repair aluminium lugs of suitable of size 50 Sqmm to becrimped properly to LT cable with crimping tool complete all as spd and directed. |
| 120 | S&F in repair aluminium lugs of suitable of size 70 Sqmm to becrimped properly to LT cable with crimping tool complete all as spd and directed. |
| 121 | S&F in repair aluminium lugs of suitable of size 95 Sqmm to becrimped properly to LT cable with crimping tool complete all as spd and directed. |
| 122 | S&F in repair aluminium lugs of suitable of size 120 Sqmm to becrimped properly to LT cable with crimping tool complete all as spd and directed. |
| 123 | S&F in repair aluminium lugs of suitable of size 150 Sqmm to becrimped properly to LT cable with crimping tool complete all as spd and directed. |
| 124 | S&F in repair aluminium lugs of suitable of size 185 Sqmm to becrimped properly to LT cable with crimping tool complete all as spd and directed. |
| 125 | S&F in repair aluminium lugs of suitable of size 240 Sqmm to becrimped properly to LT cable with crimping tool complete all as spd and directed. |
| 126 | Note:-The accepted amount will be arrived after deducting the Sch of credit i.e. Rs 1,22,779.20 and any other reduction if any from quoted amount. |
