|
| 1 | Earthwork excavation in all classes of soils except hard rock requiring blasting and depositing on bank with all leads and lifts as per SS20B including cost of all labour charges,materials, tools, equipments and all incidental charges, removal of other deleterious matter and obstructions, trimming of bottom of excavation back filling, clearing up the site and disposal of all surplus materials etc., complete as per standard specification. For Boxing |
| 2 | Berms quantity |
| 3 | Balance quantity |
| 4 | Providing, laying, spreading and compacting graded stone aggregates for Granular Sub Base,including premixing the materials with water at OMC in mechnanical mix plant, conveyance of mixed materials by tipper to site, laying in uniform layers using pavers in Sub Base course on well prepared surface and compacting with vibratory roller to acheive the desired density including cost of material, labour charges, rentals for machinery, fuel and all other incidental charges etc., complete as per clause 406 of MORTH Rev-5 for grading- VMaterial. |
| 5 | Providing, laying, spreading and compacting graded stone aggregates for Granular Sub Base,including premixing the materials with water at OMC in mechnanical mix plant, conveyance of mixed materials by tipper to site, laying in uniform layers using pavers in Sub Base course on well prepared surface and compacting with vibratory roller to acheive the desired density including cost of material, labour charges, rentals for machinery, fuel and all other incidental charges etc., complete as per clause 406 of MORTH Rev-5 for grading- III Material. |
| 6 | Providing, laying, spreading and compacting graded stone aggregates for Wet Mix Macadam 250 mm thick, including premixing the materials with water at OMC in mechnanical mix plant, conveyance of mixed materials by tipper to site, laying in uniform layers using pavers in SubBase /Base course on well prepared surface and compacting with vibratory roller to acheive the desired density including cost of material, labour harges, rentals for machinery, fuel and all other incidental charges etc., complete as per clause 406 of MORTH Rev-5 |
| 7 | Providing and laying Prime Coat over WBM / WMM surface using 7 Kg of Emulsion Bitumen (SS1) per 10 sqm for preparatory to an other bituminous construction over it, including cost of material, labour charges, rentals for machinery, fuel and all other incidental charges etc., complete as per Clause 502 of MORTH Rev - 5 |
| 8 | Providing and laying Tack Coat over WBM / WMM surface (treated with primer ) using 2.50 Kg of Bitumen Emulsion (RS1) per 10 sqm for preparatory to an other bituminous construction over it including cost of material, labour charges, rentals for machinery, fuel and all other incidental charges etc., complete as per Clause 502 of MORTH Rev - 5 |
| 9 | Providing and laying Tack Coat over Existing BT surface using 2.00 Kg of Bitumen Emulsion (RS1) per10 sqm for preparatory to an other bituminous construction over it including cost of material, labour charges, rentals for machinery, fuel and all other incidental charges etc., complete as per Clause 503 of MORTH Rev-5 |
| 10 | Providing, laying 50mm consolidated thick Bituminous Macadam using 0.20cum of 26.50-13.20mm, 0.43cum of 13.20-2.36mm and 0.08cum of 2.36mm & below size IRC metal with 37 Kgs of VG30 Grade bitumen for premixing per 10sqm including cost and conveyance of allmaterials to CMP site, heating the bitumen, aggregate and mixing them in required temperatureusing Central hot mix plant 20-30ton capacity, conveying the mix by tipper trucks to paver site,spreading the mix to uniform thickness of 50mm with mechanical paver to the specified gradesand cross sections and consolidated by 8-10 tonne Vibratory Roller to the required density etc.,including labour for attending to paver to site etc., including hire and fuel charges for 20-30tCMP with bitumen boiler, tipper trucks, Paver Finisher, Vibratory roller and all other tools and plant required, including all other incidental charges etc., complete as per specification using CMP as per clause 504 of MORTH Rev-5 |
| 11 | Providing, laying 65 mm consolidated thick Dense Bituminous Macadam using 0.24cum of 26.50- 13.20mm, 0.25cum of 13.20-2.36mm and 0.23cum of 2.36mm & below and with 53.20Kgs of VG30Grade bitumen for premixing per 10sqm including cost and conveyance of all materials to CMP site, heating the bitumen, aggregate and mixing them in the required temperature in Central Hot Mix Plant 20-30 ton capacity, conveying the mix by tipper trucks to work site, spreading the mix to uniform thickness of 50mm using paver to the specified grades and cross sections and compacted by Vibratory / Pneumatic Roller to the required density etc., including labour for attending to paver at site etc., including hire and fuel charges for 20-30ton CMP with bitumen boiler, tipper trucks, Paver Finisher, Vibratory rollers and all other tools and plant required, including all other incidental charges etc., complete as per specification using CMP as per clause 505 MORTH Rev-5 |
| 12 | Providing and laying Tack Coat over Dry Lean Cement Concrete surface using 3.00 Kg of Bitumen Emulsion (RS1) per 10 sqm for preparatory to another bituminous construction over it including cost of material, labour charges, rentals for machinery, fuel and all other incidental charges etc., complete as perClause 503 of MORTH Rev-5 |
| 13 | Providing and laying Bituminous Concrete to 30/40 mm thick (Grade-II) using 0.13 cum of 19.00 -9.50 mm, 0.17 cum of 9.50 -2.36 mm and 0.26 cum of 2.36 and below with 50.30 kgs of VG 30 bitumen for premixing per10 sqm including cost and conveyance of all materials to CMP site, heating the bitumen and aggregate to required temperature and mixing the min required temperature in Central hot mix plant 20 -30 ton capacity, conveying the mix by tipper trucks to paver site, spreading the mix to uniform thickness of 40 mm with mechanical paver to the specified grades and cross sections and consolidated by 8 -10 tonne Vibratory Roller to the required density etc., including labour for attending to paver to site etc., including hire charges and fuel charges for 20 -30 t CMP with bitumen boiler, tipper trucks, Paver Finisher, Vibratory roller and all other tools and plant required, including fuel and all other incidental charges etc., complete as per specification using CMP as per clause 507 of MORTH Rev-5 |
| 14 | Providing and laying Bituminous Concrete to 50mm thick using 0.22cum of 26.5-13.20mm, 0.24cum of 13.20-2.36mm and 0.26cum of 2.36& below IRC HBG metal with 62.40kgs of VG30bitumen for premixing per 10 sqm including cost and conveyance of all materials to CMP site, heating the bitumen and aggregate to required temperature and mixing the min required temperature in central hot mix plant 20-30ton capacity, conveying the mix by tipper trucks to paver site, spreading the mix to uniform thickness of 50mm with mechanical paver to the specified grades and cross sections and consolidated by 8-10 tonne Vibratory Roller to the required density etc., including labour for attending to paver to site etc., including hire charges and fuel charges for 20-30t CMP with bitumen boiler, tipper trucks, Paver Finisher, Vibratory roller and all other tools and plant required, including fuel and all other incidental charges etc., complete as per specification using CMP clause 507 of MORTH |
| 15 | Providing compaction for embankment / making up of low berms using the available box cut earth including all hire and fuel charges for power roller for compaction, water sprinkler, including all labour charges for laying, spreading, watering etc., complete and as directed by the departmental engineers. |
| 16 | Supply and fixing of Kilometre stone of standard design and drawing as per IRC:8-1980 (second revision),including painting and numbering etc., and all other incidental charges etc., complete. (HW-W0100) |
| 17 | Supply and fixing of HM stone of standard design and drawing as per IRC:26-1967, including painting and numbering etc., and all other incidental charges etc., complete. (HW-W0101) |
| 18 | Reconstruction of Box culvert at km 5/2 of Muthur - Udayam - Vairamadai road(SH) |
| 19 | Dismantling, clearing away and carefully stacking materials useful for re-use for any thickness of walls. Removal of PCC |
| 20 | Earthwork excavation in all classes of soils except hard rock requiring, blasting and depositing on bank with all leads and lifts as per SS20B including cost of all labour materials, tools, equipments and all incidental charges and sheeting, shoring and bracing and their subsequent removal, removal of all logs, stumps and other deleterious matter and obstructions, Trimming of bottom of excavation back filling, clearing up the site and disposal of all surplus materials, etc, complete as per standard specification for foundation. |
| 21 | Plain Cement Concreteof grade M15(Nominal mix) using 40mm ISS hardbroken granite metal including cost and conveyance of all materials to site, including cost and labour charges for formwork and centering, labour charges for compacting,curing and all incidental charges etc., complete a sper standard specification for LEVELLING COURSE BELOW Box Culvert and Wing wall. |
| 22 | Vibrated Reinforced Cement Concrete [Design Mix] M25 grade using 20 mm ISS size HBG graded metal crushed stone including cost and conveyance of all materials to site but excluding cost and fabrication for steel but including cost and labour charges for formwork and centering, labour charges, compacting, finishing and curing, including all incidental charges etc., complete for BOX CULVERT. |
| 23 | Vibrated Cement concrete M20 Grade (Nominal mix 1:1.5:3) using 40 mm ISS HBG Metal including cost and conveyance of all materials to site including cost and labour charges for form work and centering, labour charges for laying, compacting, curing and all other incidental charges etc., complete as per standard Specification for WING WALL, below sill |
| 24 | Vibrated Cement concrete M20 Grade (Nominal mix 1:1.5:3) using 40 mm ISS HBG Metal including cost and conveyance of all materials to site including cost and labour charges for form work and centering, labour charges for laying, compacting, curing and all other incidental charges etc., complete as per standard Specification for WING WALL, Above sill |
| 25 | Supply and fabrication of steel Grade Fe-500D with suitable anti corrosive measure required for all RCC items of works involved in the schedule including cost of steel cost of fabrication labour charges for cleaning the rods straightening cutting bending tying grills hoisting and placing the reinforcement in position as specified in the drawings including cost of binding wire provision of spacer bars, cover blocks and all other incidental charges etc. complete as per standard specification. |
| 26 | Providing and fixing 110mm dia PVC SEEPAGE PIPES of required length for abutment and wing, retaining wall including cost and conveyance of all materials to worksite cost and labour for semi-sperical back fill arrangements with 100mm size broken granite stones at the periphery and labour charges for fixing etc., complete to drain the back fill as per standard specifications |
| 27 | Filling behind Abutments and Returns as per Appendix 6 of IRC : 78-2014 with Carted Earth free daining Earth including cost and draining Earth having PHI value more than 35 conveyance of gravel to worksite, laying, handling charges and filling in layers tamping under optimum moisture content to get the maximum density, including watering, with all leads for water and all other incidental charges, etc., complete. |
| 28 | Construction of PCC Retaining wall at km 5/6, Well protective wall at km 6/6, 7/2, 7/4 and 7/8 of Muthur - Udayam - Vairamadai road(SH) |
| 29 | Earthwork excavation in all classes of soils except hard rock requiring, blasting and depositing on bank with all leads and lifts as per SS20B including cost of all labour materials, tools, equipments and all incidental charges and sheeting, shoring and bracing and their subsequent removal, removal of all logs, stumps and other deleterious matter and obstructions, Trimming of bottom of excavation back filling, clearing up the site and disposal of all surplus materials, etc, complete as per standard specification for foundation of Box Culvert & Retaining Wall. MORTH No. 111, 112, 304 |
| 30 | Plain Cement Concrete M10 Grade using 40mm ISS HBG metal including cost and conveyance of all materials to site, including cost and labour charges for formwork and centering, labour charges, compacting, curing, and all incidental charges etc., complete for LEVELLING COURSE BELOW THE FOOTINGS OFRETAINING WALL. MORTH No. 111, 112, 1000, 1500, 1700, 2200, 900. |
| 31 | Vibrated Cement Concrete of Grade M-20, Design Mix 1:1.5:3 using 40mm ISS HBG metal including cost and conveyance of all materials to site and cement at site including cost of form work, soft water,labour charges for mixing, transporting, laying and curing concrete, working at depths tools and plants and incidental charges such as maintaining of protective bunds, cofferdams, shoring, strutting etc; complete as per relevant standard specification for BELOW SILL LEVEL |
| 32 | Vibrated Cement Concrete of Grade M-20, Design Mix 1:1.5:3 using 40mm ISS HBG metal including cost and conveyance of all materials to site and cement at site including cost of form work, soft water,labour charges for mixing, transporting, laying and curing concrete, working at depths tools and plants and incidental charges such as maintaining of protective bunds, cofferdams, shoring, strutting etc; complete as per relevant standard specification for ABOVE SILL LEVEL |
| 33 | Providing and fixing 110mm dia PVC SEEPAGE PIPES of required length for abutment and wing, retaining wall including cost and conveyance of all materials to worksite cost and labour for semi-sperical back fill arrangements with 100mm size broken granite stones at the periphery and labour charges for fixing etc., complete to drain the back fill as per standard specifications. MORTH No. 2706, 900 |
| 34 | Filling behind Abutments and Returns as per Appendix 6 of IRC : 78-2014 with Carted Earth free daining Earth including cost and draining Earth having PHI value more than 35 conveyance of gravel to worksite, laying, handling charges and filling in layers tamping under optimum moisture content to get the maximum density, including watering, with all leads for water and all other incidental charges, etc., complete. |
| 35 | Providing Road furnitures from Km 4/4-8/0 of Muthur - Udayam - Vairamadai road(SH) |
| 36 | Providing and laying of hot applied thermoplastic compound 2.5mm thick including reflectorising glass beads at 250 gms, per sq.m area thickness of 2.50mm is exclusive of surface applied glass beads as per IRC: 35.The finished surface to be level, uniform and free from streaks and holes etc., complete (as per MORTH specification No. 803) |
| 37 | Providingandfixingreflectiveroadstudsof‘categoryA’ Raisedpavementmarkersmadeout ofpolycarbonate/methylmethercrylate /ABSmouldedbodyconfirmingto ASTMD788and reflectivepanelswithmicroprismaticlenscapableofprovidingtotal internalreflectionofthe lightentering thelensfacewithretroreflectance andchromaticity valuesconforming to ASTMD4280.Thereflective raised pavement markers shallalsoconfirm totheMORTH circularNoRW/NH.33023/ 10/97-DO.IIIdt11.06.97. Theheight,widthandlengthshall notbelessthan15mm,90mmand100mmandwithminimumreflectivearea of13Sq.cm oneachsideandtheslopetothebaseshallbe35 +/ -5degree.Eachreflectorshall have aCIL notlessthanvaluesspecified inTable2ofsaidMORTHcircular. Thestrength of detachmentoftheintegratedcylindricalshanks,(ofdiameternotlessthan19+/ -2mmarid heightnotlessthan 30+/ - 2mm)fromthebodyistobe aminimumvalueof 500 Kgf.Fixing willbebydrillingholesontheroadfortheshankstogoinside, withoutnailsandusing epoxyresinbasedadhesiveaspermanufacturer’s recommendation andcompleteasdirected bytheengineer. Themarkershallsupportaloadof13635Kgtestedinaccordancewith ASTMD428Oandconfirming toIRC 35-2015guidelinesandMORT&Hspecification804 etc., complete |
| 38 | ProvidingandErectingofRetro-ReflectorisedHazardMarkerTrafficSignmadeoutofHigh IntensityPrismaticGradeSheetingconfirmingtoType-IVstandardsofIRC-67:2022and ASTMD4956—09, specificationandfixedover2mmthickAluminiumsheet fixedovera back supporting frame of25mmx25mmx3mmMildSteel angle andsupportedon amildsteel anglepost75X75X6mmand0.60mbelowgroundlevel.Thesignpostshouldbepaintedas perIRC67-2022andfirmlyfixedtothegroundbymeansofproperlydesignedfoundation withMISgradecementconcrete45cmX45cmX60cmsizeincludingcostandconveyanceof allmaterials,equipment, Machineryand labourwithallleadsand lifts,loadingcharges necessary for satisfactorycompletionof thework asdirectedby theengineer in charge. High intensityRetro-ReflectrosheetshallconsistofminimumcoefficientofRetro-reflectionas perTable6.6ofIRC67-2022.Theretro-reflectivesheetingshallbecoveredunder7year warrantyissuedforfieldperformanceandacertifiedcopyofthreeyearsoutdoorexposure report shall be obtained asperIRC 67:2022. (as per MORT&HSpecificationNo.801) (30x90 cm) Rectanglar |
| 39 | ProvidinganderectingofRetro-Reflector›sedCautionary,MandatoryandInformatorysigns (without definition) madeoutofHighIntensityPrismaticGradeSheetingconfirming toType-IVstandardsofIRC-67:2022andASTMD4956—09,specificationandfixedover 2mmthickAluminiumsheetfixedoverabacksupportingframeof25mmx25mmx3mmMild Steelangleandsupportedonamildsteelanglepost75X75X6mmwithaclearheightofnot lessthan2. 10mfromthegroundleveltothebottomofthesignboardand0.60mbelow groundlevel.ThesignpostshouldbepaintedasperIRC 67-2022andfirmlyfixedtothe groundbymeansof properlydesignedfoundationwithM15gradecementconcrete 45cmX45cmX60cmsizeincludingcostandconveyanceofallmaterials,equipment, Machinery andlabourwith all leads and lifts, loadingchargesnecessary forsatisfactory completionofthe workasdirectedbythe engineerin Charge. HighintensityRetro-Reflectro sheet shallconsist ofminimum coefficient ofRetro-reflectionas perTable6.6 ofIRC 67- 2022.Theretro-reflectivesheetingshallbecoveredunder7 3 earwarrantyissuedforfield performanceandacertifiedcopyofthreeyearsoutdoorexposurereportshallbeobtainedas per IRC67:2022.(as per MORT&HSpecificationNo.801) |
| 40 | 90 cm equilateraltriangle |
| 41 | 60 x 45 cm Square |
| 42 | 90cm Octogen Stop boards |
| 43 | Providing and erecting of Direction and Place Identification Retro-reflectorised Sign made out of High Intensity Prismatic Grade Sheeting confirming to Type-IV standards of IRC-67: 2022 and ASTM D 4956 –09, specification and fixed over 2mm thick Aluminium sheet fixed over a back supporting frame of 25mm x 25mm x3mm Mild Steel angle and supported on a mild steel angle post 75X75X6mm with a clear height of not less than 2.10m from the ground level to the bottom of the sign board and 0.60m below ground level. The sign post should be painted as per IRC 67-2022 and firmly fixed to the ground by means of properly designed foundation with M15 grade cement concrete 45cmX45cmX60cm size including cost and conveyance of all materials, equipment, Machinery and labour with all leads and lifts, loading charges necessary for satisfactory completion of the work as directed by the engineerin- charge. High intensity Retro Reflectro sheet shall consist of minimum coefficient of Retro-reflection as per Table 6.6 of IRC 67-2022. The retro- reflective sheeting shall be covered under 7 year warranty issued for field performance and a certified copy of three years outdoor exposure report shall be obtained as per IRC 67:2022 for sign having area more than 0.9sqm (Type- IV) |
| 44 | ProvidinganderectingSinglesidedSingleGuard Metal BeamCrashBarrierSystem(Type-A,“W” SingleGuard)1.80m high, comprising of 3mm thick wall “W” beams posts and spacer channels shall be made by cold roll forming using HR conform to IS 5986Fe410/360anddipgalvanizedhavingZinc Massof550gms/sqm,minimum700mmabove road/groundlevelfixed onISMCserieschannel verticalpost150x75x5mmspaced2mcenterto center 312mm x 83mm flange width x 3mm thick, 4318mm long post directly embedded in the concrete (M15)pitsize350x350x800mmforadepthof 1100mm below ground. All fixing bolts and nuts hot dip galvanized conforming to IS:1367 clause 4.60 all complete as per Technical Specification of IRC 119 2015 and as directed by the Engineer-in-charge |
| 45 | Supplying and installation of delineators (road way indicators, hazard markers and object markers), 80-100 cm high above ground level, painted at Unit 35 Each Basic Rate approved for the year 2025-2026 (w.e.f. 22.07.2025) 480 alternatively black and white in 15 cm wide strips, fitted with 80 x 100 mm rectangular or 75 mm dia circular reflectorised panels at the top, buried or pressed into the ground and conforming to IRC-79 etc., complete (as per MoRT&H specification No. 806 |
| 46 | Proving and fixing Solar powered Traffic Blinkers of 30cm dia with PolycarbonateDome 5mm Red ofLed 150 Nos. iri each Red Blinkers Light -1 No.with Red /White/Blue Led Blinkers Delineator Solar Panel : 12v 50w Solar Panel — 1 No. 12v18AH Battery-1No.with Box, Solar CircuitController Board Box. Straight Pole : MSUnitRM Basic Rate approved for the year 2025-2026 (w.e.f. 22.07.2025) 58395.00 Each Pole 3”dia 2.5mm thick 18 Feet heightpole (1 No.) with 2 Feet under ground pole foundation,polepaintingincludingtransportation charges, installation charges etc., complete as per standard specification |
| 47 | Calculation of SubTotal, GST and Total carried out by system automatically |
| 48 | Sub Total Amount for above all items (excluding GST) |
| 49 | GST 18% for above SubTotal Amount |
| 50 | Total in Figures (SubTotal + GST) |
