|
| 1 | Excavation in foundation in ordinary soil (Loam, clay or sand) including lift upto 1.50 M. and lead upto 30 M. and including filling watering and ramming of excavated earth into the trenches or into the space between the building and the sides of foundation trenches or into the plinth and removal and disposal of surplusearth as directed by the Engineer-in-charge upto a distance of 30 M. from the foundation trenches. (Where machine can not reach/move).PWD SOR 2022 4.1.1 |
| 2 | Desposal of refused material/malwa distance up to 8 km etc all complete as the direction of engineer in charge. (AS PER PWD SOR 2020 /231( a). |
| 3 | S/L P:C:C (1:6:12) with 40 mm gauge brick ballast ,fine sand of 1.25 f.m and cement in foundation and under floor including all materials, labour, tools, & plant etc all completed as per the direction of engineer - in - charge.{ AS PER PWD SOR 2022 PAGE NO 18 SI NO 5.01 ITEM NO 273 } |
| 4 | First class Brick Work in (1:4) cement & four coarse sand 2.20 F.M. morter in foundation and plinth and T&P etc all completed as per the direction of engineer - in - charge. (AS PER PWD SOR 2022 PAGE NO 20 SI NO 6.05 ITEM NO 305 (a) |
| 5 | 12 mm thick plaster with cement and coarse sand of1.25 fineness modules in (1:4) over brick work minimum thickness not to be less than 1 cm including supply of all material, labour, tools & plant etc required for proper completion of the work. (AS PER PWD SOR 2022 PAGE NO 36 SI NO 13.11 NEW ITEM ) |
| 6 | M-150 class B/W in 1:6 one cement and six fine sand of 1.25 F.M. mortar in foundation and plinth including supply of all materials, labour& tools and plants etc. required for proper completion of the work S.I. No. 6.2.2/D.S.R-2023 |
| 7 | 4cm thick Damp proof course with cement concrete consisting of 1 part cement 2 parts approved coarse sand and 4 parts approved 10mm graded stone grit etc, completion of work S. I. No. 4.10/ D.SR-2023 |
| 8 | Providing and applying a coat of residual petrolium bitmun of grade of B.G-10 of approved qualtiy using 1.7kg/sqm on D.P.C including cost of fuel, wood, other materials, labour T & P etc. required for proper completion of the work. S.I. No. 4.13/D.S.R-2023 |
| 9 | Brick work with common burnt clay F.P.S ( non modular ) bricks of class designation 7.5 in superstructure above plinth level up to floor v lavel in all etc DSR 2023 6.4.1. |
| 10 | 12mm thick plaster with cement and coarse sand of 1:25 F.M. on ceiling in 1:4 including supply of all materials labour T&P etc. S. I. No. 13.1.1/D.S.R-2023 |
| 11 | Supply and fixing 6 mm (1/4”) China white glazed tile in flooring or in skirting or dado laid with 1:4 cement and approved coarse sand mortar finished with white cement slurry, jointing and polishing complete, including supply all material, labours and tools and plants. S.I No. 11.38/D.S.R-2023 |
| 12 | M.S. or iron work of small sizes and section such as holding down bolts, hold fast, tie rods grating etc. wrought to required from including supply of steel bolts, nuts wastage etc. and their fixing required for proper completion of the work.PWD SOR 2022 10.21 . |
| 13 | Providing and fixing 1mm thick M.S. Sheet garge door with frame of 40x40x6mm (1½\"x1½\"x¼\") angle iron 3.15 mm (1/8\") thick M.S. gusset plate at the junction and corners including supply and fixing of necessary fittings. Lock rail of 15\" length of oxidised iron and including pintels hooks at the top and applying priming coat of red lead paint on all sides complete. SOR |
| 14 | Supply and fixing Vitrified tiles (Kajaria, Bell, J & J or Somani) in flooring or in skirting or dado laid with 1:4 cement and approved coarse sand mortar finished with white cement slurry, jointing and polishing complete including supply of all materials, labour and T&P complete. S.I. NO-11.41.2/D.S.R-2023 SIZE (600MMX600MM) |
| 15 | Finishing wall with water proof cement paint of approved make and quality on the new wood with three coat to given an even shade including supply of all material, labour, tool & plant. Required for completion of the work. (S.I No.13.44.1/D.S.R-2023) |
| 16 | Sand filling in plinth including supply of necessary quantity of sand ….comp S.I NO- 2.25(a)/D.S.R-2023 |
| 17 | Providing & applying white cement based putty of average thickness 1mm of approved brand and manufacture over thr plastered wall surface to prepare the surface even smooth complete. SOR-13.80/D.S.R-2023 |
| 18 | Distempering two coats (first coat)with oilbond distemper of approved brand and manufacture and of required shade on undercorated wall surface to give an even shadeover and including a priming coat with cement primer of approved brand and manufacture such as Berger, J&N , Shalimar, Asian Paint after throughly brushing the surface free from the mortar dropping and other foreigns matters and also including the surface even with plaster of Paris or approved synthetic material and sand prepared smooth including of supply of all materials, labour, T&P etc.required for proper completion of work S.I. No.13.83.2 /D.S.R-2023 |
| 19 | Providing and Fixing C.P.V.C Pipes complete with C.P.V.C Fittings and champs including cutting and making good walls etc. (internal works) D.S.R -18.07/2023 |
| 20 | a. 15 mm Dia Nominal outer dia pipe |
| 21 | b. 25 mm Dia Nominal outer dia pipe |
| 22 | Providing and Fixing brass ferrule with C.I. mouth com I/C boring and tapping the main 15 mm. DSR 18.20.1/2023 |
| 23 | Providing and Fixing 15mm dia C.P. brass bib cock or app. Quality 15 mm DSR - 18.49.1/2023 |
| 24 | Providing and fixing C.P. brass 32mm size bottle Trap of approved quality DSR 17.22(a)/2023 |
| 25 | a. 110mm & (O.D) SOR 2022 |
| 26 | b. 90mm & (O.D) SOR 2022 |
| 27 | Providing and placing on terrace (at all floor level) polyethylene water storage tank IS: 12701 marked with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the same support for tank DSR 18.48/2023 |
| 28 | Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing DSR 17.32.2/2023 |
| 29 | Providing and fixing wash basin with C.I brackets 15 mm(550 X 400 mm) C.P brass pillar taps, including painting of fittings and brackets, cutting and making good the walls wherever required. DSR 17.7.3/2023 |
| 30 | Providing and fixing white viterous china flat back half small urinal of size 580X380X350 mm with white PVC automatic flushing cistern, with fittings, standard size C.O brass flush pipe, spreaders with unions and clamps(all in C.P brass) with waste fittings as per IS : 2556, CI trap with outlet grating and other couplings in C.P brass including painting of fittings and cutting and making good the walls and floors wherever required. DSR 17.5.1/2023 |
| 31 | Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required:White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests |
| 32 | Providing and fixing PTMT liquid soap container 109 mm wide 125 mm high abd 112 mm distance from wall of standard shape with bracket of the same materials with snap fittings of approved quality and colour weighing not less than 105 gms. DSR 17.71/2023 |
| 33 | Wiring point for light with 1.5 sqm FRLSH PVC installed multistrand single core copper conductor cable in heavy guage rigid steel conduit concealed in the wall, complete with 14 SWG copper earth continuity wire, piano type switch & ceiling rose on 3 mm thick phenolic laminated bakelite sheet etc complete in all respect, including matching colour wash S.No.- 1.1.1/D.S.R-2022 |
| 34 | Wiring point for fan/ fresh air fan(light duty exhausted fan) with 1.5 sqm FRLSH PVC installed multistrand single core copper conductor cable in heavy guage rigid steel conduit concealed in the wall, complete with 14 SWG copper earth continuity wire, piano type switch & ceiling rose on 3 mm thick phenolic laminated bakelite sheet etc complete in all respect, including matching colour wash S. No. 1.3.1/ D.S.R-2022 |
| 35 | Wiring point for plug with 1.5 sqm FRLSH PVC installed multistrand single core copper conductor cable in heavy guage rigid steel conduit concealed in the wall, complete with 14 SWG copper earth continuity wire, piano type switch & ceiling rose on 3 mm thick phenolic laminated bakelite sheet etc complete in all respect, including matching colour wash SOR 2018 141C + 187C |
| 36 | Supply and wiring of 2.5 sq mm FRLSH PVC installed 11 V grade multistrand single core copper conductor cable in 20 mm dia heavy guage rigid steel conduit concealed in wall, complete with the one number 14 SWG copper earth continuity wire including matching colour wash etc. complete in all respect. S. No. 1.7.2/D.S.R-2022 |
| 37 | Supply and laying of aluminium conductor PVC insulated armoured served sheathed cable 1100 Volts grade at a depth of 750 mm below ground level over a cushion of 75 mm. thick sand all around and protected with burnt bricks on side and top. On surface the cable run shall be fixed on M.S clamps etc. of suitable size or as directed by the Engineer Incharge, complete in all respect. The armouring of the cable shall be properly connected with the earth conductor by clamps etc. 10 sq. mm 2 core. S.No. 7.1.1/D.S.R-2022 |
| 38 | Supply and burying of 40 mm dia X 4.5 meter long G.I pipe vertically for earthing having 12 mm dia. Holes spaced 75 mm apart drilled upto 2 metre from the bottom complete with earthing lead of No. 6 to 8SWG GI wire in G.I pipe up to appron (and from appronto switch board the cost of G.I wire pipe will be extra) upto switch board, 30 cm square C.I box with hinged cover masonary enclosure, funnel at top , alternate layer of charcol/coke and salt at least 150 mm thick alround etc. as per directions of Engineer incharge complete in all respect as per drawing. S.No. 5.1/D.S.R-2022 |
| 39 | Supply and fixing of 6 Amp to 32 Amp MCB (10 KA) C Curve S.I.NO-2.10.1/ D.S.R-2022 |
| 40 | Eraction & testing of ceiling fan and regulators & placing fan box etc as required. excluding supply of down rod complete in all respect. S.I.NO-1.45 /D.S.R-2022 |
| 41 | Installation & testing of exhaust. fan on the existing hole with suitable size of rag bolts. nuts & washer etc. complete in all respect .S.No.1.50.1 /D.S.R-2022 |
| 42 | Extra for fixing the louvers/ shutter complete with frame for a exhaust fan for all size S.I. NO- 1.51/ D.S.R-2022 |
| 43 | Providing and Fixing CFL Standard make. S.I. NO-1.35/D.S.R-2022 |
| 44 | Taking out existing CC interlocking paver blocks from footpath/ central verge, including removal of rubbish etc., disposal of unserviceable material to the dumping ground, for which payment shall be made separately and stacking of serviceable material within 50 metre lead as per direction of Engineer-in-Charge.DSR 2023 16.83 |
| 45 | S/L of stone ballast 22.4 to 53 mm size with stacking for measurment etc all complete as per the direction of engineer in-charge . AS PER PWD SOR 2020 RMR |
| 46 | Supply of screening material with stacking for measurment etc all complete as per the direction of engineer in-charge .AS PER PWD SOR 2020 RMR |
| 47 | Supply & laying 80 mm thick Precase cement concrete interlocking paver block (Grey color) with top layer of minimum 8 mm thickness having plan dimension 200X(160+120mm) of O.P cement smoothing gloss finish,skid resistant manufacturered from rubber moulds. RMR |
| 48 | GST Please Enable Macros to View BoQ information |
