|
| 1 | Supply and Erection of following material against replacement/installation/Laying of item/Erection of material as per RESPO Drawings/Estimate. Work includes all cartage/carriage(Store to Site), T&P, commissioning and any other work which is required for completion of work. as per RESPO norms. |
| 2 | 1x120 sqmm aluminum armoured cable - 1000000329 |
| 3 | SUSPENSION CLAMP WITH EYEHOOK - 2500000037 |
| 4 | DISTRIBUTION BOX CLAMP - 2500000052 |
| 5 | NUT & BOLT - 2500000622 |
| 6 | 11 KV V-TYPE STEEL CROSS-ARM 65X65X6 MM -2700000161 |
| 7 | AL. PAINT - 2700000157 |
| 8 | Clamp FOR Top Channel with Nut bolt - 1200000136 |
| 9 | NUMBER PLATE - 1400000384 |
| 10 | GAURDING ANGLE CLAMP - 2500000054 |
| 11 | CONCRETING#OF PCC POLE - 2700000657 |
| 12 | LT CLAMP FOR STP - 1400000248 |
| 13 | T/F BASE ANGLE 65X65X6X2028 MM - 2700000355 |
| 14 | A.B.CAB. L.T.(3X95)+ (1X70)+ (1X16)SQ.M.M. - 2200000005 |
| 15 | A.C.S.R. WEASEL CONDUCTOR - 1000000028 |
| 16 | MS CHANNEL 100X50X6MM 2240 mm long( No) -1800000166 |
| 17 | - BRACKET WITH N& B - 2700000256 |
| 18 | LT DISTRIBUTION BOX - 2700000229 |
| 19 | Gaurding Angle SOxSOxSx2S00 mm - 1800000085 |
| 20 | 11 KV DP Clamp for PCC Pole 8.5 Mtr - 2500000238 |
| 21 | DEAD END CLAMP - 2500000051 |
| 22 | 11 KV PIN NUT WITH -2700000263 |
| 23 | STAY COMPLETE - 2700000152 |
| 24 | STP Pole 11 Mtr. - 1500000115 |
| 25 | PCC POLE 8.5 MTR.LONG - 1500000000 |
| 26 | 11KV DISC INSULATOR (T&C) 45KN -2700000253 |
| 27 | Supply of 6 SWG GI wire - 2700000716 |
| 28 | EARTHING OF DTR BY MS ROD OF 20X2250 MM -2700000750 |
| 29 | PIN INSULATOR 11 KV - 2700000006 |
| 30 | RED OXIDE PAINT - 2700000158 |
| 31 | DISTRIBUTION BOX 3 PHASE - 2200000022 |
| 32 | DANGER BOARD WITH CLAMP,N&B FOR 8.5 PCC -1700000780 |
| 33 | 11 KV Cross Arm Clamp for 11M STP - 2500000330 |
| 34 | DISC FITTING 45KN (T&C) - 1700000374 |
| 35 | MS Angle 65x65x6mm 2700mm bracing 4Clamp - 1800000171 |
| 36 | M.S. DROPPER CHANNEL 100X50X5X2028 MM -1800000115 |
| 37 | CONCRETING MATERIALS (0.2 CUM) -2700000474 |
| 38 | Receive Bak Material Please Enable Macros to View BoQ information |
