|
| 1 | Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners ofrequired dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDMrubber/neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass/ stainless steel screws, all complete as perarchitecturaldrawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) : For fixed portionPowder coated aluminium (minimum thickness of powder coating 50 micron) as per entire satisfaction and direction of Engineer-incharge |
| 2 | For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and makingprovision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasketrequired (Fittings shallbepaidforseparately).Powdercoatedaluminium (minimum thickness of powder coating 50 micron) |
| 3 | Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc.with EPDM rubber /neoprene gasket etc. complete as per the architectural drawin and the directions of engineer incharge. (Cost of aluminium snap beading shall be paid in basic item): With float glass panes of 5 mm thickness (weight not less than12.50 kg/sqm) |
| 4 | Providing and fixing 12 mm thick prelaminated particleboard flat pressed three layer or graded wood particleboard conforming to IS: 12823 Grade l Type ll, in panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screwsetc. complete as per architectural drawings and directions of engineer- in-charge Pre-laminated particle board with decorative lamination on both sides |
| 5 | Providing and fixing ISI marked aluminium butt hinges anodised (anodic coating not less than grade AC10 as per IS: 1868) transparent or dyedtorequired colour or shade with necessaryscrewsetc.complete: 100x63x4 mm |
| 6 | Providing and fixing aluminium die cast body tubular type universal hydraulic door closer (having brand logowith ISI, IS : 3564, embossed on the body, door weight upto 35 kg and door width upto 700 mm), with necessary accessories and screws etc. complete. |
| 7 | Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 asper IS : 1868) transparent or dyed to required colour orshade,with necessary screws etc. complete : 125 mm |
| 8 | Providing and fixing bright finished brass hanging type floor door stopper with necessary screws, etc. complete. |
| 9 | Providing and fixing bright finished brass 100 mm mortice latch and lock, ISI marked, with six levers and apair of anodised (anodic coating not less than grade AC 10 as per IS : 1868) aluminium lever handles ofapproved quality with necessary screws etc. complete. |
| 10 | Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10as per IS : 1868 ) transparent or dyed to required colour orm mshade, with necessary screws etc. complete :300x10 mm |
| 11 | Providing & fixing anodised aluminium grill ofapproved design/pattern, with approved standardsection and fixed to the existing window framewith C.P brass/stainless steel screws @ 200 mmcentre to centre, including cutting the grill toproper opening size for fixing and operation ofhandles and fixing approved anodised aluminiumstandard section around the opening , all completeas per requirement and direction of Engineer -incharge. |
| 12 | Providing and fixing Acrylic nam board (dimension-430 mm x 530 mm ) Letters engraved on aluminium Frame, of approved quality with necessary woks etc. complete. |
| 13 | Supply and fixing of G.I Pipe class B 20 mm |
| 14 | Supply and fixing of 500 Ltr. Watr tank ISI mark as pr dirction of E/I |
| 15 | Supply and fixing Lid of 500 Ltr. Watr tank ISI mark as pr dirction of E/I |
| 16 | Supply and fixing of Ball Valve of approvd quality with plastic Flot complte. |
| 17 | Supply and fixing gun metal gate Valve with C.I. wheel of approvd quality 25 mm nominal bore. Please Enable Macros to View BoQ information |
