|
| 1 | RECEPTION AREA: Supply, fabrication and installation of reception counter shall be fabricated from high-quality plywood conforming to IS 710 (marine/BWP-grade) — for example 19 mm for primary load-bearing panels (top, sides, vertical supports, shutters), 12 mm for intermediate partitions or secondary structural elements, and 9 mm for drawer bottoms or non-load bearing backing. All plywood must be free from voids or defects, kiln-dried to a moisture content between 5 % and 15 %, and treated against borer/termite infestation. The external visible surfaces — including top, front, sides, shutters, and drawer facades — shall be overlaid with 4 mm thick decorative veneer, Mica (matching approved shade and grain) and finish-refined with multiple coats of PU-polish to achieve a smooth, uniform, durable surface. Internally, cabinets, drawers, and open shelves shall be provided as per layout; drawers shall operate on good quality telescopic or ball-bearing channels, and shutters/cupboards shall have approved hinges and handles (locks or magnetic catches if specified). Electrical works for integrated LED-strip lighting (as per design) — including concealed wiring/cable management, drivers or transformers, switches, and safe installation — shall be part of the scope. The entire work encompasses supply of all materials, hardware/fittings, labour for fabrication and on-site installation, finishing, quality checks, clean-up and hand-over, inclusive of incidental charges, transport and adjustments. Final installed dimensions to be 3000 mm (length) × 950 mm (depth) × 1000 mm (height), with workmanship ensuring flush joints, smooth surfaces, proper alignment, stable drawers/doors, and a neat, refined appearance. Design and colour shall be as directed by the Engineer-in-Charge (EIC). |
| 2 | RECEPTION AREA: Supply, fabrication and installation of a Custom made closed display shelves with bottom storage unit fitted with glass shutters thick 5mm or nearest /Ply wood shutters and supported by a framework made from high-quality Century Sainik 710 plywood. The quoted rate is comprehensive and covers the complete supply of materials, fabrication processes, installation services, and all associated labour, hardware, and incidental charges required for full execution of the project delivered and installed as a fully finished and functional unit. Shutters/cupboards shall have approved hinges and handles (locks or magnetic catches if specified). Electrical works for integrated LED-strip lighting (as per design) — including concealed wiring/cable management, drivers or transformers, switches, and safe installation — shall be part of the scope. The entire work encompasses supply of all materials, hardware/fittings, labour for fabrication and on-site installation, finishing, quality checks, clean-up and hand-over, inclusive of incidental charges, transport and adjustments. Design and colour shall be as directed by the Engineer-in-Charge (EIC). |
| 3 | RECEPTION AREA: Supply and delivery of a high-back net chair Brand–( Godrej/sleep/Nilkamal) designed for ergonomic comfort and long-term durability. The chair shall be equipped with a smooth hydraulic height-adjustment mechanism, an integrated tilt-lock system for customizable seating posture, and sturdy chrome-finished legs that provide enhanced stability and aesthetic appeal. The unit shall be supplied complete with all standard features and functional components, including breathable mesh back support, cushioned seat, armrests, and any other accessories necessary to ensure the chair is delivered fully operational, ready for immediate use, and compliant with quality and performance Design and colour shall be as directed by the Engineer-in-Charge (EIC). |
| 4 | RECEPTION AREA: Supply, fabrication and installation of wall paneling along the stair-side wall or where ever required shall be fabricated from high-quality plywood conforming to IS 710 (marine/BWP-grade) The external visible surfaces shall be overlaid with 4 mm thick decorative veneer, Mica (matching approved shade and grain) and finish-refined with multiple coats of PU-polish to achieve a smooth, uniform, durable surface with golden beading projected parts with Electrical works for integrated LED-strip lighting (as per design) — including concealed wiring/cable management, drivers or transformers, switches, and safe installation — shall be part of the scope. The entire work encompasses supply of all materials, hardware/fittings, labour for fabrication and on-site installation, finishing, quality checks, clean-up and hand-over, inclusive of incidental charges, transport and adjustments. Design and colour shall be as directed by the Engineer-in-Charge (EIC). |
| 5 | RECEPTION AREA: Supply, fabrication and installation of wall paneling Around automatic open glass door shall be fabricated from high-quality plywood conforming to IS 710 (marine/BWP-grade) The external visible surfaces shall be overlaid with 4 mm thick decorative veneer, Mica (matching approved shade and grain) and finish-refined with multiple coats of PU-polish to achieve a smooth, uniform, durable surface with golden beading projected parts with Electrical works for integrated LED-strip lighting (as per design) — including concealed wiring/cable management, drivers or transformers, switches, and safe installation — shall be part of the scope. The entire work encompasses supply of all materials, hardware/fittings, labour for fabrication and on-site installation, finishing, quality checks, clean-up and hand-over, inclusive of incidental charges, transport and adjustments. Design and color shall be as directed by the Engineer-in-Charge (EIC |
| 6 | RECEPTION AREA: Supply, fabrication and installation 3-seater sofa of overall dimensions 2.05 m (length) × 0.94 m (depth) × 0.94 m (height), constructed on a robust internal frame (hard wood or high-grade commercial plywood/plywood-based frame) suitably treated for durability. The seating and backrest shall be padded with high-resilience polyurethane foam of specified density to ensure comfort and longevity; armrests, base, and supporting structure shall be properly reinforced. The sofa shall be fully upholstered in good quality leatherette — the upholstery material, stitching, seams, and finishing shall be of professional-grade workmanship, free from defects, and properly secured on the frame. All necessary hardware/accessories (springs or webbing if part of design, legs/feet, gliders or floor-protective shoes, internal reinforcements, upholstery tacks/staples/adhesives, stitching threads) required for complete and ready-to-use furnishing shall be included. The quoted rate shall cover complete supply of materials, upholstery, fabrication, labour for upholstery and assembly, on-site installation, finishing, adjustment, and ancillary incidental charges (packing, transportation, placement, cleanup). The finished sofa shall be delivered fully assembled and ready for use, with even upholstery finish, firm seating, stable base, no visible defects, and consistent quality matching approved sample or specification. Design and color shall be as directed by the Engineer-in-Charge (EIC). |
| 7 | RECEPTION AREA: Supply, fabrication and installation of center table featuring a marble (natural or engineered) top securely mounted on a precision-fabricated base made of suitable galvanized iron (G.I.) sections, all metal parts epoxy-coated finish. The supplier shall provide full supply, fabrication, finishing, assembly and on-site installation — including marble slab, G.I. frame, epoxy finish, necessary anchoring hardware, floor glides/levelers, and any protective sealants or edge profiles. The assembled table shall be stable, level, structurally sound to bear the weight of the marble top and normal use, free of defects (welds, mis-alignment, rough edges), and ready for immediate use. The quoted rate is inclusive of all materials, workmanship, finishing, delivery, installation and incidental charges for complete, functional delivery. Design and color shall be as directed by the Engineer-in-Charge (EIC).-900cmx700cm |
| 8 | RECEPTION AREA: Providing and fixing of a high-quality area rug suitable for residential or commercial interiors. The scope shall include full supply of all materials, workmanship, delivery, placement and finishing so that the rug is ready for immediate use upon installation. The rug shall provide long-lasting durability, a comfortable under-foot feel, natural thermal and acoustic insulation, and a premium aesthetic finish. The quoted rate shall cover all aspects required for complete functionality — including supply of the rug, labour for placement, transport, delivery, positioning, and any incidental work necessary for proper installation. Design and color shall be as directed by the Engineer-in-Charge (EIC). 6ft X 9ft |
| 9 | RECEPTION AREA: Providing and fixing of a carpet fabricated from nylon synthetic fibers, engineered to provide high durability, superior stain resistance, and reliable performance in medium- to heavy-traffic residential or commercial environments. The quoted scope covers the complete supply of materials, manufacturing, and installation services necessary to deliver a fully functional, properly fitted, and finished carpet application Design and color shall be as directed by the Engineer-in-Charge (EIC). |
| 10 | RECEPTION AREA: The landscaping of the skylight area using a combination of decorative pebbles and selected natural plants, designed to enhance aesthetic appeal, promote greenery, and ensure proper integration with the surrounding environment. The quoted scope includes all materials, plants, soil, planting, and labour charges required for complete and sustainable execution. Design and color shall be as directed by the Engineer-in-Charge (EIC). (Artificial mat, FRP pot with draceana plant/ficus,sculpture&small fountain) |
| 11 | RECEPTION AREA: Supply and installation of a chandelier, with the quoted rate inclusive of all materials, fittings, electrical components, labour, and ancillary charges necessary for its complete and functional installation. Design and colour shall be as directed by the Engineer-in-Charge (EIC). |
| 12 | RECEPTION AREA: Providing and fixing vulcanized rubber entrance matting at the designated entrance step abutting the car porch, including supply of mat of approved make, profile, and configuration, having anti-skid and weather-resistant properties, with a minimum thickness not less than 10–12 mm or equivalent, fabricated with perforated/honeycomb surface architecture for enhanced dirt-scraping and drainage performance. The mat shall be installed in the specified location over a thoroughly cleaned and levelled substrate, using suitable adhesive or approved fixing methodology wherever necessary to ensure firm placement, stability, and alignment. All materials, labour, equipment, and incidental operations required for the complete and Design and colour shall be as directed by the Engineer-in-Charge (EIC). |
| 13 | RECEPTION AREA: Providing and fixing exterior-grade entrance mat in front of the glass door at the verandah, using heavy-duty UV-resistant rubber / coir / synthetic polypropylene mat of approved quality, having anti-skid surface texture and designed for outdoor use, minimum thickness not less than 10–12 mm. The mat shall be of approved pattern (ribbed / honeycomb / brush type) suitable for effective dirt-scraping and water-drainage. Installation shall include cleaning and preparing the surface, placing or fixing the mat in proper alignment, and securing it with suitable adhesive or anchoring method wherever required to prevent movement. The rate shall include all materials, labour, equipment, and incidental works necessary to complete Design and colour shall be as directed by the Engineer-in-Charge (EIC). |
| 14 | CCTV area :Supply, fabrication and installation of custom made modular office table fabricated from high-quality plywood conforming to IS 710 (marine/BWP-grade) — for example 19 mm for primary load-bearing panels (top, sides, vertical supports, shutters), 12 mm for intermediate partitions or secondary structural elements, and 9 mm for drawer bottoms or non-load bearing backing. including top, front, sides, shutters,CPU cabin and drawer facades — shall be finished with laminate smooth, uniform, durable surface. Internally, cabinets, drawers, and open shelves shall be provided as per layout; drawers shall operate on good quality telescopic or ball-bearing channels, and shutters/cupboards shall have approved hinges and handles (locks or magnetic catches if specified). The entire work encompasses supply of all materials, hardware/fittings, labour for fabrication and on-site installation, finishing, quality checks, clean-up and hand-over, inclusive of incidental charges, transport and adjustments. Final installed dimensions to be (1.80mx0.9mx0.8m), with workmanship ensuring flush joints, smooth surfaces, proper alignment, stable drawers/doors, and a neat, refined appearance. Design and colour shall be as directed by the Engineer-in-Charge (EIC). |
| 15 | CCTV area: Supply and installation A modern,ergonomic office chair Brand–(Godrej/sleep/Nilkamal/ equivalent) designed to provide comfort and support for extended periods of desk work. The chair shall have adjustable features,durable Design and colour shall be as directed by the Engineer-in-Charge (EIC). |
| 16 | CCTV area: Supply, fabrication and installation of a notice board of overall dimensions 1.20 m × 0.75 m, fabricated with a rigid plywood backing frame of approved thickness, duly overlaid with high-density sponge padding and finished with high-quality upholstery fabric of approved shade and texture. The board shall be neatly stretched, wrapped, and secured to ensure a smooth, wrinkle-free display surface suitable for pinning notices. The item shall include all materials, edge finishing, fixing accessories, labour, and incidental operations required for proper installation at the designated location Design and colour shall be as directed by the Engineer-in-Charge (EIC). |
| 17 | Visitors lounge Area: Supply, fabrication and installation of a 2-seater sofa of overall dimensions 1.19 m (length) × 0.76 m (depth) × 0.84 m (height), constructed on a robust internal frame (hard wood or high-grade commercial plywood/plywood-based frame) suitably treated for durability. The seating and backrest shall be padded with high-resilience polyurethane foam of specified density to ensure comfort and longevity; armrests, base, and supporting structure shall be properly reinforced. The sofa shall be fully upholstered in good quality leatherette — the upholstery material, stitching, seams, and finishing shall be of professional-grade workmanship, free from defects, and properly secured on the frame. All necessary hardware/accessories (springs or webbing if part of design, legs/feet, gliders or floor-protective shoes, internal reinforcements, upholstery tacks/staples/adhesives, stitching threads) required for complete and ready-to-use furnishing shall be included. The quoted rate shall cover complete supply of materials, upholstery, fabrication, labour for upholstery and assembly, on-site installation, finishing, adjustment, and ancillary incidental charges (packing, transportation, placement, cleanup). The finished sofa shall be delivered fully assembled and ready for use, with even upholstery finish, firm seating, stable base and consistent quality matching approved by the Engineer-in-Charge (EIC). |
| 18 | Visitors lounge Area: Supply, fabrication and installation of a Custom made multipurpose storage unit approximate size of (1.9MX2.1MX0.35M) designed for office visitors area , combining open selves for display and storage with a single shuttered compartment for concealed storage fitted with glass shutters thick 5mm or nearest /Ply wood shutters and supported by a framework made from HDF with durable laminate . The quoted rate is comprehensive and covers the complete supply of materials, fabrication processes, installation services, and all associated labour, hardware, and incidental charges required for full execution of the project delivered and installed as a fully finished and functional unit. shutters/cupboards shall have approved hinges and handles (locks or magnetic catches if specified. The entire work encompasses supply of all materials, hardware/fittings, labour for fabrication and on-site installation, finishing, quality checks, clean-up and hand-over, inclusive of incidental charges, transport and adjustments. Design and colour shall be as directed by the Engineer-in-Charge (EIC). |
| 19 | Visitors lounge Area: Supply, fabrication and installation of a custom round centre/tea table (Approximate -35CM Dia) with a polished nano-white top slab (artificial/nano stone) mounted on a precision-fabricated metal frame, fully epoxy-coated for corrosion resistance. The work shall include supply of all materials, fabrication of the frame, cutting and finishing of the top slab, necessary hardware, transport to site, assembly, leveling and placement — delivering a stable, ready-to-use table. Design and colour shall be as directed by the Engineer-in-Charge (EIC). |
| 20 | Security Room Area: Supply, fabrication and installation of custom made modular office table with side table fabricated from HDF panels with a laminated finish. for drawer bottoms or non-load bearing backing. All plywood must be free from voids or defects, kiln-dried to moisture content between 5 % and 15 %, and treated against borer/termite infestation. The external visible surfaces — including top, front, sides, shutters,CPU cabin and drawer facades — shall be finished with laminate smooth, uniform, durable surface. Internally, cabinets, drawers, and open shelves shall be provided as per layout; drawers shall operate on good quality telescopic or ball-bearing channels, and shutters/cupboards shall have approved hinges and handles (locks or magnetic catches if specified). The entire work encompasses supply of all materials, hardware/fittings, labour for fabrication and on-site installation, finishing, quality checks, clean-up and hand-over, inclusive of incidental charges, transport and adjustments. Final installed dimensions to be 1.8 m× 0.8 m × 0.85 m or nearer size with workmanship ensuring flush joints, smooth surfaces, proper alignment, stable drawers/doors, and a neat, refined appearance. Design and colour shall be as directed by the Engineer-in-Charge (EIC). |
| 21 | Security Room Area: Providing, supplying, and installing Amodern, ergonomic office chair Brand–(Godrej/sleep/Nilkamal/ equivalent) designed to provide comfort and support for extended periods of desk work. The chair shall have adjustable features, durable construction and Design and colour shall be as directed by the Engineer-in-Charge (EIC). |
| 22 | Security Room Area: Providing, supplying, and installing Amodern,ergonomic Visitors chair Brand–(Godrej/sleep/Nilkamal/ equivalent) designed to provide comfort and support for extended periods of desk work. The chair shall have adjustable features,durable construction and Design and colour shall be as directed by the Engineer-in-Charge (EIC). |
| 23 | Security Room Area :Supply, fabrication and installation of a Custom made storage unit Approximate size of 2.10Mx2.10Mx0.35m designed to store files, documents and office materials in an organized manner , storage fitted with glass shutters thick 5mm or nearest /Ply wood shutters and supported by a framework made from HDF with durable laminate . The quoted rate is comprehensive and covers the complete supply of materials, fabrication processes, installation services, and all associated labour, hardware, and incidental charges required for full execution of the project. delivered and installed as a fully finished and functional unit. shutters/cupboards shall have approved hinges and handles (locks or magnetic catches if specified. The entire work encompasses supply of all materials, hardware/fittings, labour for fabrication and on-site installation, finishing, quality checks, clean-up and hand-over, inclusive of incidental charges, transport and adjustments. Design and colour shall be as directed by the Engineer-in-Charge (EIC). |
| 24 | Training Center area: Supply, fabrication and installation of custom made modular office table fabricated from HDF panels with a laminated finish. for drawer bottoms or non-load bearing backing. All plywood must be free from voids or defects, kiln-dried to a moisture content between 5 % and 15 %, and treated against borer/termite infestation. The external visible surfaces — including top, front, sides, shutters,CPU cabin and drawer facades — shall be finished with laminate smooth, uniform, durable surface. Internally, cabinets, drawers, and open shelves shall be provided as per layout; drawers shall operate on good quality telescopic or ball-bearing channels, and shutters/cupboards shall have approved hinges and handles (locks or magnetic catches if specified). The entire work encompasses supply of all materials, hardware/fittings, labour for fabrication and on-site installation, finishing, quality checks, clean-up and hand-over, inclusive of incidental charges, transport and adjustments. Final installed dimensions Approximate size of 1.8 m× 0.8 m × 0.85 m with workmanship ensuring flush joints, smooth surfaces, proper alignment, stable drawers/doors, and a neat, refined appearance. Design and colour shall be as directed by the Engineer-in-Charge (EIC). |
| 25 | Training Center area: Providing, supplying, and installing modern, ergonomic office chair Brand–(Godrej/sleep/Nilkamal/ equivalent) designed to provide comfort and support for extended periods of desk work. The chair shall have adjustable features, durable construction and Design and color shall be as directed by the Engineer-in-Charge (EIC). |
| 26 | Training Center area : Providing, supplying, and installing of a writing pad chair Brand–(Godrej/sleep/Nilkamal/ equivalent) featuring a cushioned seat, with the quoted rate including all materials, components, and accessories necessary for a fully functional and ready-to-use seating unit Design and color shall be as directed by the Engineer-in-Charge (EIC). |
| 27 | Training Center area: Supply, fabrication and installation of deco paneling, executed using 16 mm IS 710–grade plywood as the base substrate, The surface shall be overlaid with deco panels finish. The quoted rate is comprehensive, covering all materials, labour components, accessories, and incidental charges required for the complete Design and color shall be as directed by the Engineer-in-Charge (EIC). |
| 28 | Training Center area: Supply, fabrication and installation of a custom made podium measuring Approximate size of 1.2 m × 0.75 m, constructed with a stainless steel (SS) frame and incorporating glass panels. The quoted rate includes all materials, fittings, labour, and ancillary charges necessary for complete and functional execution Design and color shall be as directed by the Engineer-in-Charge (EIC). |
| 29 | Conference Room Area : Supply, fabrication and installation of a conference table measuring Approximate size of 8.7 m × 2.4 m × 0.9 m, featuring a centrally integrated flower trough fabricated high-quality plywood conforming to IS 710 (marine/BWP-grade) — for example 19 mm for primary load-bearing panels (top, sides, vertical supports, shutters), 12 mm for intermediate partitions or secondary structural elements, and 9 mm for drawer bottoms or non-load bearing backing. All plywood must be free from voids or defects, kiln-dried to a moisture content between 5 % and 15 %, and treated against borer/termite infestation. The external visible surfaces — including top, front, sides, shutters, and drawer facades — shall be overlaid with 4 mm thick decorative veneer, Mica (matching approved shade and grain) and finish-refined with multiple coats of PU-polish to achieve a smooth, uniform, durable surface. Electrical works for profile lights (as per design) — including concealed wiring/cable management, drivers or transformers, switches, and safe installation — shall be part of the scope. The entire work encompasses supply of all materials, hardware/fittings, labour for fabrication and on-site installation, finishing, quality checks, clean-up and hand-over, inclusive of incidental charges, transport and adjustments. Final installed dimensions to be 8.7 m × 2.4 m × 0.9 m,), with workmanship ensuring flush joints, smooth surfaces, proper alignment, stable drawers/doors, and a neat, refined appearance. Design and color shall be as directed by the Engineer-in-Charge (EIC). |
| 30 | Conference Room Area: supply and installation of hanging lights, with the quoted rate encompassing all materials, fittings, electrical components, labour, and ancillary charges required for complete and functional installation. Design and color shall be as directed by the Engineer-in-Charge (EIC). |
| 31 | Conference Room Area :Providing, supplying, and installing a premium ergonomic executive swivel office chair Brand–(Godrej/sleep/Nilkamal/ equivalent) with headrest, adjustable armrests, PU/matrix upholstery, multi-angle locking knee tilt mechanism, and all associated hardware and accessories, complete in all respects as per the following specifications and Design and color shall be as directed by the Engineer-in-Charge (EIC). |
| 32 | Conference Room Area :Providing, supplying, and installing a premium ergonomic swivel office chair Brand–(Godrej/sleep/Nilkamal/ equivalent) with adjustable height, PU-upholstered seat and back, crystal chrome base, and multifunctional tilt mechanism, complete with all materials, hardware, and installation Design and colour shall be as directed by the Engineer-in-Charge (EIC). |
| 33 | Conference Room Area: Supply, fabrication and installation of wall paneling along the conference area wall shall be fabricated from high-quality plywood conforming to IS 710 (marine/BWP-grade) The external visible surfaces shall be overlaid with 4 mm thick decorative veneer, Mica (matching approved shade and grain) and finish-refined with multiple coats of PU-polish to achieve a smooth, uniform, durable surface with golden beading projected parts with Electrical works for integrated LED-strip lighting (as per design) — including concealed wiring/cable management, drivers or transformers, switches, and safe installation — shall be part of the scope. The entire work encompasses supply of all materials, hardware/fittings, labour for fabrication and on-site installation, finishing, quality checks, clean-up and hand-over, inclusive of incidental charges, transport and adjustments. Design and colour shall be as directed by the Engineer-in-Charge (EIC). |
| 34 | Conference Room Area :Supply and installation of Profile lighting for the false ceiling, walls including all necessary materials, electrical accessories, fittings, and labour, ensuring complete, functional, and aesthetically integrated illumination. Design and colour shall be as directed by the Engineer-in-Charge (EIC). |
| 35 | Conference Room Area :Supply and installation of acoustic wall paneling using 9 mm thick PET acoustic panels measuring 8\" × 4\", with a density of 2000 gsm/m³ and an NRC (Noise Reduction Coefficient) of 0.8. The quoted rate includes all materials, fittings, labour, and ancillary charges necessary for complete and effective acoustic treatment of the wall surfaces Design and colour shall be as directed by the Engineer-in-Charge (EIC). |
| 36 | Conference Room Area: Supply and installation of flooring using Prestige Polyester Carpet Cashmere (2 m width, CS2001M – S Grey). The quoted rate is all-inclusive, covering materials, labour, adhesives, cutting, fitting, and any ancillarycharges required for complete and finished flooring installation. Design and colour shall be as directed by the Engineer-in-Charge (EIC).n. |
| 37 | Conference Room Area: Supply, fabrication and installation of a Custom made Closed display shelf Approximate size of 3.25Mx3Mx0.3M designed to store monuments in an organized manner , Shelves made with toughened glass storage fitted with glass shutters thick 5mm or nearest /Ply wood shutters and supported by a framework made from HDF with durable laminate . The quoted rate is comprehensive and covers the complete supply of materials, fabrication processes, installation services, and all associated labour, hardware, and incidental charges required for full execution of the project. delivered and installed as a fully finished and functional unit. shutters/cupboards shall have approved hinges and handles (locks or magnetic catches if specified. The entire work encompasses supply of all materials, hardware/fittings, labour for fabrication and on-site installation, finishing, quality checks, clean-up and hand-over, inclusive of incidental charges, transport and adjustments. Design and colour shall be as directed by the Engineer-in-Charge (EIC). |
| 38 | CM Security room Area: Supply, fabrication and installation of custom-designed L-shaped office table fabricated from HDF panels with a laminated finish. for drawer bottoms or non-load bearing backing. All plywood must be free from voids or defects, kiln-dried to a moisture content between 5 % and 15 %, and treated against borer/termite infestation. The external visible surfaces — including top, front, sides, shutters,CPU cabin and drawer facades — shall be finished with laminate smooth, uniform, durable surface. Internally, cabinets, drawers, and open shelves shall be provided as per layout; drawers shall operate on good quality telescopic or ball-bearing channels, and shutters/cupboards shall have approved hinges and handles (locks or magnetic catches if specified). The entire work encompasses supply of all materials, hardware/fittings, labour for fabrication and on-site installation, finishing, quality checks, clean-up and hand-over, inclusive of incidental charges, transport and adjustments. Final installed dimensions to be Approximate size of 1.8 m× 0.8 m × 0.85 (main table),1.2mx.50x.85 (Return section) with workmanship ensuring flush joints, smooth surfaces, proper alignment, stable drawers/doors, and a neat, refined appearance. Design and colour shall be as directed by the Engineer-in-Charge (EIC). |
| 39 | CM Security room Area: Supply and delivery of a high-back net chair Brand–(Godrej/sleep/Nilkamal/ equivalent) designed for ergonomic comfort and long-term durability. The chair shall be equipped with a smooth hydraulic height-adjustment mechanism, an integrated tilt-lock system for customizable seating posture, and sturdy chrome-finished legs that provide enhanced stability and aesthetic appeal. The unit shall be supplied complete with all standard features and functional components, including breathable mesh back support, cushioned seat, armrests, and any other accessories necessary to ensure the chair is delivered fully operational, ready for immediate use, and compliant with quality and performance. Design and colour shall be as directed by the Engineer-in-Charge (EIC). standards |
| 40 | CM Security room Area: Supply and delivery and installation of modern, ergonomic Visitors chair Brand–(Godrej/sleep/Nilkamal/ equivalent) designed to provide comfort and support for extended periods of desk work. The chair shall have adjustable features, durable construction Design and colour shall be as directed by the Engineer-in-Charge (EIC). |
| 41 | Providing, supplying, and installing the LED-strip light/Profile light runs only in those sections of the false ceiling as per the approved layout — using good quality 12 V or 24 V DC LED strips (single-colour, RGB or tunable white as per design), along with matching LED drivers/power supplies and necessary low-voltage wiring. All LED strips shall be mounted neatly — either directly or preferably in aluminium profiles / channels with diffusers (for better heat dissipation, protection, and clean light output). All wiring from driver to strips must be properly insulated and concealed within the false-ceiling cavity or approved conduits, with correct polarity, circuit protection, and compliance to applicable electrical standards. The quoted scope includes supply of all materials (LED strips, driver, wiring, profiles/diffusers if used), labour for installation, electrical connections, testing and commissioning, and incidental work (cutting, concealment, fixing, cleanup). After installation the lighting shall be tested to ensure uniform light output (no dark spots or flicker), safe operation, and firm mounting and concealed wiring. Design and colour shall be as directed by the Engineer-in-Charge (EIC). |
| 42 | Painting the outside & inside walls with Acrylic emulsion paint interior/Exterior of approved quality and color (Asian/Berger/ICI make) two coats after cleaning the surface at all heights and levels including all cost and conveyance of materials, all labour charges, hire charges for tools and plants, scaffolding charges, etc complete as per standard specification. Design and color shall be as directed by the Engineer-in-Charge (EIC). |
| 43 | Supply and fixing Simple roller blinds are typically made from durable polyester or waterproof PVC fabric chosen based on whether the blind needs to provide complete light-blockout (blackout) or filtered/partial light (sunscreen / screen fabric) while offering fade resistance against sunlight. Operation is via a side chain mechanism — typically a plastic bead-chain attached to a clutch or spring-clutch drive — allowing the blind to be smoothly raised or lowered and locked at any desired height .Design and colour shall be as directed by the Engineer-in-Charge (EIC). |
| 44 | Providing false ceiling in correct lines and levels by using premium quality GI Sections\" (Make :GYPROC or equivalent for frame work and covered with GYPSUM Board Panels (Make :GYPROC or equivalent of 12.5mm thick or nearest thickness) maximum spacing for sections in 60x60 cm including all other accessories like hooks & nuts, screws, PVC grips, and necessary fittings, cutting holes for false ceiling light fittings and electrical cable pipes & ornamental design work etc including all cost and conveyance of materials, loading & unloading charges, hire charges for tools and plants labour charges etc complete as per standard specification. (Ref Spec DSR code no.12.45.1) Design shall be as directed by the Engineer-in-Charge (EIC). |
| 45 | The work shall include the supply, delivery, and installation of clocks (digital or analog) (Brand–Ajanta/Titan/Casio/Harris/Equivalent) at the Security Room, Training Centre, Conference Hall, and CM Security Room. The quoted rate shall cover all materials, fittings, mounting accessories and labour required for complete and functional installation at each location. The design, including the type and layout of clocks and mounting arrangement, shall be as determined by the Engineer-in-Charge (EIC). Installation shall be carried out by qualified personnel, including any wall-preparation or mounting work as needed, ensuring each clock is securely fixed, properly aligned for visibility, fully tested and operational before handover. The scope also covers final clean-up and removal of any debris or waste generated during installation. Design and colour shall be as directed by the Engineer-in-Charge (EIC). |
| 46 | The work shall include the supply, delivery, and installation of clock (digital or analog) at the Reception (Brand – Brand-Ajanta/Seiko / Equivalent). The quoted rate shall cover all materials, fittings, mounting accessories and labour required for complete and functional installation at each location. The design, including the type and layout of clocks and mounting arrangement, shall be as determined by the Engineer-in-Charge (EIC). Installation shall be carried out by qualified personnel, including any wall-preparation or mounting work as needed, ensuring each clock is securely fixed, properly aligned for visibility, fully tested and operational before handover. The scope also covers final clean-up and removal of any debris or waste generated during installation. Design and colour shall be as directed by the Engineer-in-Charge (EIC). |
| 47 | Supply and installation of a door-side mat (memory foam, non-slip, rapid water-absorption, super-soft velvet finish), measuring 4 ft × 2 ft on the 1st floor, with the quoted rate inclusive of all materials, labour, and any necessary accessories required for proper placement and finish Design and colour shall be as directed by the Engineer-in-Charge (EIC).. (brand should be included) |
| 48 | Supply, fabrication and installation of wall décor using frame-mounted wall art. The supplier/contractor shall supply and install framed décor pieces (such as prints, paintings, photographs, or artworks), subject to the design approved by the Engineer-in-Charge (EIC). Frames may be made of wood, metal, acrylic, or any other approved material suitable for the space. Each frame shall have proper backing, protective glazing (glass or clear acrylic), and suitable fittings for secure wall mounting. The frame finish (color, profile, and texture) shall conform to the design approved by the EIC. Installation shall ensure that all frames are level, firmly anchored, and hung at a visible and appropriate height. After installation, all frames must have a clean and uniform appearance — free of dust, fingerprints, or damage — and the artwork inside each frame must be properly centred, without warping, misalignment, or distortion. Design and colour shall be as directed by the Engineer-in-Charge (EIC). |
| 49 | Supply of manpower for electrification work— such as wiring, installation of panels, switches, fixtures, etc. They must also supply and use any machines, tools or equipment needed for that work. Whether skilled electricians or helpers, the workers must be suitable and safe. The quoted rate covers labour, machinery, tools, and everything required to complete the electrical work properly. |
| 50 | Supply of man mazdoor for Civil work ( finishing work) |
| 51 | Design, supply, and installation of a 3D acrylic logo integrated with an LED lighting profile, complete with all necessary materials, electrical components, accessories,and labour required to ensure full functionality and a finished, illuminated appearance. 45cm X 45cm ( 3 nos). Design and color shall be as directed by the Engineer-in-Charge (EIC). |
| 52 | Design, supply, and installation of a 3D acrylic logo integrated with an LED lighting profile, complete with all necessary materials, electrical components, accessories, and labour required to ensure full functionality and a finished, illuminated appearance. 75cmX75cm( 1nos). Design and colour shall be as directed by the Engineer-in-Charge (EIC). |
| 53 | Provide and apply texture-paint of approved make, shade, and texture — as approved by the Engineer-in-Charge — to all designated wall surfaces. The work shall include thorough surface preparation: cleaning the surface, removing dust, loose mortar or old paint, and repairing minor cracks or unevenness; apply suitable primer and putty where required; then apply two coats of the specified texture paint to achieve a uniform, approved finish. The rate shall include the cost of all materials (primer, putty, paint, cleaning materials), labour, scaffolding or ladders, surface preparation, mixing, application, finishing, protection of surrounding surfaces, and all incidental works — complete in all respects, as directed by the Engineer-in-Charge. |
| 54 | Provide rough-cast plaster on prepared exterior walls: apply a cement-sand mortar (Cement : Sand = 1 : 3 by volume) / putty over the cleaned and damp wall surface; dash washed gravel or crushed stone (coarse aggregate) onto the mortar while still plastic; finish the surface as directed by the Engineer-in-Charge (EIC) |
| 55 | Supply and arrangement of natural plants along with flower vases containing artificial/natural flower, with the quoted rate covering all materials, plants, vases, flowers, and labour necessary for complete and aesthetically pleasing installation FRP pot with (indoor plant) chamedora palm/ZZ plants/China doll plant including filing etc. |
| 56 | Supply and arrangement of natural plants along with flower vases containing artificial/natural flowers, with the quoted rate covering all materials,plants, vases, flowers, and labour necessary for complete and aesthetically pleasing installation FRP pot with (outdoor plant) Eugenia, china doll big, ficus, areca palm including filing etc. |
