Corrigendum New Terms and Condition for supply of Chainlink fencing mesh, RCC Poles and Barbed wire
Technical Bid
06-01-2026
2
31-12-2025
Corrigendum Terms and Condition for supply of Chainlink fencing mesh, RCC Poles and Barbed wire
Technical Bid
06-01-2026
3
26-12-2025
Corrigendum Terms and Condition for supply of barbed wire
Other
06-01-2026
Name of Work:- Chainlik Fencing
Sl. No.
Item Description
1
GALVANIZED STEEL CHAIN LINK FENCE FABRIC – Line Wire–Galvanized steel wire of 3mm diameter Fabric Size–100x100mm Height – 150cm, Line Wire – 2 numbers of line wires of 4.00 mm diameter, Standard- Conforming to IS-2721-2003, with up to date amendments
2
GALVANIZED STEEL CHAIN LINK FENCE FABRIC – Line Wire–Galvanized steel wire of 4mm diameter Fabric Size–100x100mm Height – 150cm, Line Wire – 2 numbers of line wires of 4.00 mm diameter, Standard- Conforming to IS-2721-2003, with up to date amendments
3
RCC FENCING POLES HEIGHT 2.0 MType–Straight, Length – 2.00 mDimensions – Bottom 10x10 cm square, Top 8x8cm square, Cement Concrete Mix – Cement, sand and metal ratio 1:2:4, with 12.5 nominal size coarse aggregate. Sand, used should be free from clay and salt, concrete mix shall be conforming tograde M-15 of IS:456:2000, Reinforcement – 4 round vertical bars of 6 mm diameter. 11 No of stirrups of 6mm diameter round MS bare 20cm centre, to center., Hooks- 5 no. bottom hook should be provided 60 cm above the bottom of the pole. second at 82.5 cm, third hook at 112.5 cm, fourth hook at 150 cm, top and fifth hook at 195 cm from bottom. Manufacturing- In order to ensure desired, compressive strength, RCC fencing poles should become pacted with the help of platform vibrators. Surface should be uniform and free from voids. The concrete cover over the reinforcement should not be less than 1.5 cm
4
Galvanized steel Barbed wireLine Wire – Galvanized steel wire of 2.5mm diameter Point wire- Galvanized steel wire of 2.5mm diameterBarbs- Distance between two boards 72mm the barbs shall have four points and shall be formed by twisting two point wires each two turns tightly around both the line wires making altogether four complete turns Standard – Conforming to IS – 278-2009 Please Enable Macros to View BoQ information
We takes all possible care for accurate & authentic tender information, however Users
are requested to refer Original source of Tender Notice / Tender Document published by
Tender Issuing Agency before taking any call regarding this tender.
