Sales : +91-777 804 8217
| Sl. No. | Item Description |
| 1 | SEWAGE TREATMENT PLANT(100 KLD CAPACITY) :- Supplying, Fabrication, Installing, Testing & Commissioning of Pre Fabricated Package Type Sewage Treatment Plantof capacity 100 KLD. The sewage treatement shall be based on MBR technology. The nature of effluent from domestic sewage from toilets and kitchen shall be discharge seperately into the STP. The cost will also include MS puddle flange, Inlet, Outlet, overflow, test line, drain line,by-pass line, vent, foot rest, inspection platform with railing, moving ladder and making support for pipes. Complete Sewage Treatment Plant of capacity 100KLD to be provided as per the details given in Schedule \"A\" Part-I from page No 38 to 42 of CA. |
| 2 | Supply, Installation, Testing & Commissioning of “SCADA SYSTEM” for 100 KLD Sewage Treatment Plant along with various Automation equipment for STP as indicated and as per the details given in Schedule \"A\" Part-I page No 43 of CA. The STP SCADA system shall comprise of following :-(a) Central Monitoring Station (CMS) with personal computer with latest processor and monitor of suitable size.(b) UPS with two hours backup(c) Colour Laser Printer(e) Data Gateway(f) SCADA software |
| 3 | SEWAGE TREATMENT PLANT(75 KLD CAPACITY) :- Supplying, Fabrication, Installing, Testing & Commissioning of Pre Fabricated Package Type Sewage Treatment Plantof capacity 75 KLD. The sewage treatement shall be based on MBR technology. The nature of effluent from domestic sewage from toilets and kitchen shall be discharge seperately into the STP. The cost will also include MS puddle flange, Inlet, Outlet, overflow, test line, drain line,by-pass line, vent, foot rest, inspection platform with railing, moving ladder and making support for pipes. Complete Sewage Treatment Plant of capacity 75 KLD to be provided as per the details given in Schedule \"A\" Part-I from page No 44 to 48 of CA. |
| 4 | Supply, Installation, Testing & Commissioning of “SCADA SYSTEM” for 75 KLD Sewage Treatment Plant along with various Automation equipment for STP as indicated and as per the details given in Schedule \"A\" Part-I page No 49 of CA. The STP SCADA system shall comprise of following :-(a) Central Monitoring Station (CMS) with personal computer with latest processor and monitor of suitable size.(b) UPS with two hours backup(c) Colour Laser Printer(e) Data Gateway(f) SCADA software |
| 5 | Supplying, Installation, Testing and commissioning of extendable, compartmentalised, front operated , back openable, LT cubicle STP panel having ingress protection of IP 54, suitable for operation on 415 Volt 3 phase 50 c/s power supply fabricated out of 2mm thick CRCA sheet steel and base channel of MS section not less than 100mm X 50mm X 5mm, gland plate of 3 mm thick cleanedand treated in 7 tank process and powder coated with approved shade with TPN Electrolytic Aluminiumbusbar of 100A duly insulated in colour coding & suitable to withstand 25 MVA fault lavel complete with supplying & installationof following equipment including interconnection, control wiringetc as required. All MCCBs shall have microprocessor based release & shall have manually operated handle.It includes all wiring , cabling of required sizes from STP panel board to each electrical parts with on site control panel for individual motors . The panel will consists ofItems as per drawings attached.(Panel shall be of outdoor type installation with suitable IP Protection)Complete LT cubicle STP panel having ingress protection of IP 54 to be provided as per the details given in Schedule \"A\" Part-I from page No 50& 51 of CA. |
| 6 | Lumpsum price worked out by the contractor for EARTH WORK , SITE CLEARANCE AND DEVELOPMENT as listed in Schedule \"A\" Part-II. |
| 7 | Lumpsum price worked out by the contractor forPATH as listed in Schedule \"A\" Part-III. |
| 8 | Lumpsum price worked out by the contractor forPlumbing Worksas listed in Schedule \"A\" Part-IV. |
| 9 | Lumpsum price worked out by the contractor for Internal Electric Supply as listed in Schedule \"A\" Part-V. |
| 10 | Lumpsum price worked out by the contractor for Internal WaterSupply as listed in Schedule \"A\" Part-VI. |
| 11 | Lumpsum price worked out by the contractor forEXTERNAL WATER SUPPLY SUPPLY as listed in Schedule \"A\" Part-VII. |
| 12 | Lumpsum price worked out by the contractor forArea Drainage Works as listed in Schedule \"A\" Part-VIII. |
| 13 | Lumpsum price worked out by the contractor for EXTERNAL Electric SUPPLYas listed in Schedule \"A\" Part-IX. |
| 14 | Lumpsum price worked out by the contractor forSecurity and Fencing Gate Works Works as listed in Schedule \"A\" Part-X. |
| 15 | Supply,layingand testing of150 mm inner diameter of double wall corrugated (DWC) high density polyethylene pipes (HDPE) and stiffness classes-8 (SN-8)with ISI marked (with CML no) with and including all fitting & jointing materialfor sewage line and laid in trenches as specified in IS-16098 (Part-2) : 2013 and as per manufacturer\"s instructions complete allas specified and as directed. |
| 16 | Supply,layingand testing of200 mm inner diameter of double wall corrugated (DWC) high density polyethylene pipes (HDPE) and stiffness classes-8 (SN-8)with ISI marked (with CML no) with and including all fitting & jointing materialfor sewage line and laid in trenches as specified in IS-16098 (Part-2) : 2013 and as per manufacturer\"s instructions complete allas specified and as directed. |
| 17 | Supply,layingand testing of250 mm inner diameter of double wall corrugated (DWC) high density polyethylene pipes (HDPE) and stiffness classes-8 (SN-8)with ISI marked (with CML no) with and including all fitting & jointing materialfor sewage line and laid in trenches as specified in IS-16098 (Part-2) : 2013 and as per manufacturer\"s instructions complete allas specified and as directed.Note Serial Item No. 13 to 15 :- Bedding of pipe shall not be provided in normal condition and CONSTRUCTION METHODS shall be strictly compiledas per clause no A-4 of ANNEX \"A\" of IS 16098 (Part-2) : 2013. |
| 18 | Supply and fixing for100mm thick 560mm dia (10 ton capacity manhole cover) FRP/GRP manhole cover with frame of specified sizes/colour and load, manhole cover with frame load test shall be confirming to IS1726 & BS EN 124 standards, colour shall be as per Engineer in charge and manhole cover shall be engraved with clients name confirmed with Engineer in charge complete with accessories in all respects nothing will be paid separately ; complete all as specified anddirected by the Engineer-in-charge. |
| 19 | Material and labour for construction of brick masonary circular type manholeofsize 910mm (Internal dimension) at bottom and 600mm dia at top with FPS CLASS DESIGNATION 75 , exceeding 910mm deep & not exceeding 1650mm deep , conforming to IS 12592 complete all as specified using under mentioned specifications :- (i) Earth work (Excavation,Return filling & Removal) in any type of Soil.(ii)PCC (1:4:8) type D2 in foundation using 40mm graded stone aggregate.(iii)Brick work with cement mortar (1:4) using Sub class \"B\" Bricks. (iv) 15mm thick rendering to internal surfaces of chamberin CM(1:4).(v) 15 mm thick rendering to external surface of chamber upto 150mm below GL in CM(1:4)(vi) 50mm thick PCC (1:4:8) type D2 ain sub base of floor 40mm graded stone aggregate.(vii) 50mm thick floor in PCC 1:2:4 type B1 using 20mm graded stone aggregate surfaces finished even & smooth without using extra cement.(viii) Two Coats of white wash on all exposed internal & external surfaces.(ix) Mild Steel sheet cover not less than 6mm thick withangle iron frame size 50mmx50mmx6mm with locking arrangement.(x) Painting to steel surfaces internally externally with two coats of synthetic enamel painting over a coat of the red oxide primer. |
| 20 | Material and labour for construction of brick masonary circular type manholeofsize 1220mm (Internal dimension) at bottom and 600mm dia at top with FPS CLASS DESIGNATION 75 , exceeding 1650mm deep & not exceeding 2300mm deep , conforming to IS 12592 complete all as specified using under mentioned specifications :- (i) Earth work (Excavation,Return filling & Removal) in any type of Soil.(ii)PCC (1:4:8) type D2 in foundation using 40mm graded stone aggregate.(iii)Brick work with cement mortar (1:4) using Sub class \"B\" Bricks. (iv) 15mm thick rendering to internal surfaces of chamberin CM(1:4).(v) 15 mm thick rendering to external surface of chamber upto 150mm below GL in CM(1:4)(vi) 50mm thick PCC (1:4:8) type D2 ain sub base of floor 40mm graded stone aggregate.(vii) 50mm thick floor in PCC 1:2:4 type B1 using 20mm graded stone aggregate surfaces finished even & smooth without using extra cement.(viii) Two Coats of white wash on all exposed internal & external surfaces.(ix) Mild Steel sheet cover not less than 6mm thick withangle iron frame size 50mmx50mmx6mm with locking arrangement.(x) Painting to steel surfaces internally externally with two coats of synthetic enamel painting over a coat of the red oxide primer. |
| 21 | Material & labour for Earthing complete with galvanized steel earth plate electrode 600mm x 600mm x 6mm thickness , buried directly in ground (earth pit not less than 2.25 metresdeep below the normal ground level ) with top edge of plate not less than 1.5 metres below the normal ground level connected to galvanized iron strip 32mm x 6mm by means of nuts bolts, washers, check nuts of GI steel all as shown in electric plate no 3 of SSR -2009 Part I, all as specified and indicated complete and including charcoal dust, salt etc and GI protection pipe medium grade 40mm and GI watering pipe 20mm light grade with funnel and wire mesh,40mm thick pre-cast RCC M-15 (nominal mix) cover reinforced with XPM weight not less than 4 kg /sqm with suitable handle of 6mm dia MS bar and angle iron 40x40x3mm frame for cover,PCC M-15 (nominal Mix) pit , earth work in any type of soil and connected all as specified and as directed.Notes :-(i) Up to 7.5metres length of pipe of 40 mm dia and GIstrip shall be deemed to be included in unit rate quoted by the tenderer(ii) Resistance of earthing should be less than 1 Ohms failing which the contractor will do the earthing again to achieve the desired result i.e. less than1 ohms(iii) In case soil is not suitable same is to be replaced with good quality clay soil to achieve the desired result of less than 1 ohms(iv) Quoted rate shall be deemed to be inclusive for the above aspect |
| 22 | Supply and fixing for DBOXx MCB Protected Socket With sheet steel Enclosure single pole 25 Amp with 3 pin plug topfor AC connection from Socket point to stabilizer ; complete all as specified and as directed by Engineer-in-charge. |
| 23 | Supply and fixing for LED Lamp 9/10 watt B-22 holder base with polycarbonate body and aluminium heat sink warm white ; complete all as specified and as directed by Engineer-in-charge. |
| 24 | Material and labour for or cutting existing GI/CI any size of pipe linemaking new connection for PPR pipe including short pieces , inserting tees, bends, sockets, unionetc with existing water line; complete all as specified and as directed by Engineer-in-charge. |
| 25 | Supply ,install ,testing and commissioning of centrifugal pumpset of capacity 1.5 HP/1.2 KW,3 phase, 415 Volts,50 Hz,2900 RPM, min Head rang- 25 Mtrs at 312.50 L.P.M flow rate, horizontal type , inlet & outlet size -50 mm can withstand wide voltage fluctuation from 200-440 Volts, designed to prevent overloading and motor burntout, dynamically balanced rotating parts to ensure minimum vibratios during running, CED coated cast iron components for rust free & longer life. and motor body & delivery casing made of material- cast iron , shaft- stainless steel including, NRV of suitable size,cable complete all as specified. (01 set including 02 Nos of pumps one working & one standby) ; complete all as specified and as directed by Engineer-in-charge. |
| 26 | Supply ,install ,testing and commissioning of centrifugal pumpset of capacity 2 HP/1.5 KW,3 phase, 415 Volts,50 Hz,2900 RPM, min Head rang- 25 Mtrs at 350 L.P.M flow rate, horizontal type , inlet & outlet size -50 mm can withstand wide voltage fluctuation from 200-440 Volts, designed to prevent overloading and motor burntout, dynamically balanced rotating parts to ensure minimum vibratios during running, CED coated cast iron components for rust free & longer life. and motor body & delivery casing made of material- cast iron , shaft- stainless steel including,NRV of suitable size,cable complete all as specified. (01 set including 02 Nos of pumps one working & one standby) ; complete all as specified and as directed by Engineer-in-charge. |
| 27 | Material, labour , testing & commissioning of straight through jointing kit, heat shrinkabletype suitable for XLPE/ PVC cables of size 10 to 70 Sqmm 3.5/4 core with working voltage 1100 volts; complete all as specified and as directed by Engineer-in-charge. |
| 28 | Material, labour , testing & commissioning of indoor Endjointing kit, heat shrinkabletype suitable for XLPE/ PVC cables of size 10 to 70 Sqmm 3.5/4 core with working voltage 1100 volts ; complete all as specified and as directed by Engineer-in-charge. |
| 29 | Supply and fixingfor street light bracket of 1.5 metres length made out of 40mm dia GI pipe medium grade bend to shape at 120 degree and welded at required end fixed with MS flat iron clamp bolts, nuts and washers includingpainting MS clamp with one primer coat and two coat of aluminium paint and bracket fixed to poles or walls complete all as specified and as directed by Engineer-in-charge. |
| 30 | Supply and fixing for weather Proof PVC Junction Box made out of not less than 2 mm thick of size 250x200x100 mm (approx) complete with hinged door locking arrangement and consisting of 01 No panel mounted connector 4 pole 32 A - 01 NoMCB SP 06 Amps 10 KA - 01 No, confirming to IP 65 complete including fixing on street light pole with MS Clamps, bolts, nuts and washers ; complete all as specified and as directed by Engineer-in-charge. |
| 31 | Supply and layingforPVC insulated and sheathed with copper conductor cable of size2.5 Sqmm 3 core, 1100 volt fixed in position from junction box to street light fitting connector with fixing arrangements on wall/ RCC/Steel tubular poles complete all as specified and as directed by Engineer -in-charge. |
| 32 | Supply,installing, testing and commissioning of LT feeder pillar box factory made outdoor type, fabricated out of 3.15 mm thick CRCA sheet with angle iron base frame made of 65 x65 x 6mm, 45 cm height, dust and vermine proof, suitable for voltage 415 separate hinge door for each compartment for incoming and outgoing MCCB etc. with locking arrangement, with back door openable screwed, legs grouted in PCC including painting with two coats of epoxy powder paint over a coat of primer after alkaline degreasing, descaling in dilute sulphuric acid or any other acid and phosphate and with aluminum busbar (TPN),including provn of following :- Note : (a) The panel shall be as per CPRI certificate (b) Rates inclusive of PCC completei) Aluminium Bus bar 200-A- mounted on porcelain insulator - 01 Set ( Set of 4 Nos) with PVC sleeve insulationii) MCCB 4 Pole , 160 Amp, 415 V, 25 KA (Thermal magnetic release) adjustable overload setting 80% to100%- 01 No (incommer) Iii) MCCB 4 Pole , 100 Amp, 415 V, 25 KA (Thermal magnetic release) adjustable overload setting 80% to100%- 01 Nos (ii) MCCB 63 Amps TPN 16 KA - 02 Nosv) Digital Voltmeter of size 96x96mm rating 0-500 volts with selector switch - 01 No vi) Digital Amp meter of size 96x96mm rating 0-1000 Amp with CT\"s & selection switch - 01 No vii) RYB LED indicator- one set |
| 33 | Supply,installing, testing and commissioning of LT feeder pillar box factory made outdoor type, fabricated out of 3.15 mm thick CRCA sheet with angle iron base frame made of 65 x65 x 6mm, 45 cm height, dust and vermine proof, suitable for voltage 415 separate hinge door for each compartment for incoming and outgoing MCCB etc. with locking arrangement, with back door openable screwed, legs grouted in PCC including painting with two coats of epoxy powder paint over a coat of primer after alkaline degreasing, descaling in dilute sulphuric acid or any other acid and phosphate and with aluminum busbar (TPN),including provn of following :- Note : (a) The panel shall be as per CPRI certificate (b) Rates inclusive of PCC completei) Aluminium Bus bar 200-A- mounted on porcelain insulator - 01 Set ( Set of 4 Nos) with PVC sleeve insulationii) MCCB 4 Pole , 125 Amp, 415 V, 25 KA (Thermal magnetic release) adjustable overload setting 80% to100%- 01 No (incommer) Iii) MCCB 4 Pole , 100 Amp, 415 V, 16 KA (Thermal magnetic release) adjustable overload setting 80% to100%- 01 Nos (ii) MCCB 63 Amps TPN 16 KA - 01 Nosv) Digital Voltmeter of size 96x96mm rating 0-500 volts with selector switch - 01 No vi) Digital Amp meter of size 96x96mm rating 0-1000 Amp with CT\"s & selection switch - 01 No vii) RYB LED indicator- one set |
| 34 | Material & Labourfor Material and Labour for breakdown of electric supply including excavation in hard / dense soil with use of Earthmoving/labour and taking out dameged Cable repair tojointing kit for 1100 V (Earthed)grade cable for Straight through joint cold shrink type joint complete with jointing material and accessories suitable for 3.5 core XLPE armoured aluminium conductor cable of size 25 sqmm to 95 sqmm, after repairs, returning filling and removal of surplus soil ; complete all as specified and as directed by Engineer-in-charge. |
| 35 | Material and Labour for breakdown of electric supply including excavation in hard / dense soil with use of Earthmoving/labour and taking out dameged Cable repair tojointing kit for 1100 V (Earthed)grade cable for Stright through joint cold shrink type joint complete with jointing material and accessories suitable for 3.5 core XLPE armoured aluminium conductor cable of size 120 sqmm to 185 sqmm, after repairs, returning filling and removal of surplus soil; complete all as specified and as directed by Engineer-in-charge. |
| 36 | Material and Labour for breakdown of electric supply including excavation in hard / dense soil with use of Earthmoving/labour and taking out dameged Cable repair tojointing kit for 11000 V (Earthed)grade cable for Straight through joint cold shrink type joint complete with jointing material and accessories suitable for 3 core XLPE armoured aluminium conductor cable of size 50 sqmm to 95 sqmm, after repairs, returning filling and removal of surplus soil; complete all as specified and as directed by Engineer-in-charge. |
| 37 | Material and Labour for brakdown of electric supply including excavation in hard / dense soil with use of Earthmoving/labour and taking out dameged Cable repair tojointing kit for 11000 V (Earthed)grade cable for Stright through joint cold shrink type joint complete with jointing material and accessories suitable for 3 core XLPE armoured aluminium conductor cable of size 120 sqmm to 185 sqmm, after repairs, returning filling and removal of surplus soil; complete all as specified and as directed by Engineer-in-charge. |
| 38 | Material and Labour for breakdown of OFC cable,communication cable etcincluding excavation in hard / dense soil with use of Earthmoving/labour and taking out dameged Cable repair to suitable jointing kit forcommunication cable complete with jointing material and accessories suitable for network after repairs, returning filling and removal of surplus soil ; complete all as specified and as directed by Engineer-in-charge. |
| 39 | Material & Labourfor break down of pipe line bursting/cracks including excavation in hard / dense soil with the use of Earthmoving machinery/ labour and taking out old CI /GI/MS defective / misaligned water pipe line of any size carefully after discon-nection of joints to a length up to 8 mtr and create bund with excavated earth and dewatering / bailing out water complete with diesel engine driven pump set and positioning the pipe line after repairs, returning filling and removal of surplus soil / excavated material with the help of excavator / proclainer all as directed by Engineer-in-Charge.NOTE: (a)M/L for LeadJoints/ spares/ CI/GI specials, CI / GI/MS pipe included in quoted rate (b)The rate is deemed to include Cost for tool and plant and transportation required for attending the repair work. (c)Disconnecting / dismantling/ cutting the existingpipe line is included in the quoted rate. (d) The rate is inclusive of earth work complete including returning & refilling in any type of strata complete. (e) The breakdown shall be attended within 4 Hrs of intimation round the clock and time of restoration shall be maximum of 8 Hours. The additional manpower required to complete the job in quoted rate is deemed to be included in the quoted ; complete all as specified and as directed by Engineer-in-charge. |
| 40 | Material and labour for construction of masonary valve pit chamber ofsize 1000mm x 1000mm x 1050mm (Internal dimension) complete all as specified using under mentioned specifications and shown on drawing No CEPZ/C-TD/006/13 Sheet 1/1 dated 11-09-2013 :- (i) Earth work (Excavation,Return filling & Removal) in any type of Soil.(ii)PCC (1:4:8) type D2 in foundation using 40mm graded stone aggregate.(iii)Brick work with cement mortar (1:4) using Sub class \"B\" Bricks. (iv) 15mm thick rendering to internal surfaces of chamberin CM(1:4).(v) 15 mm thick rendering to external surface of chamber upto 150mm below GL in CM(1:4)(vi) 50mm thick PCC (1:4:8) type D2 ain sub base of floor 40mm graded stone aggregate.(vii) 50mm thick floor in PCC 1:2:4 type B1 using 20mm graded stone aggregate surfaces finished even & smooth without using extra cement.(viii) Two Coats of white wash on all exposed internal & external surfaces.(ix) Mild Steel sheet cover not less than 6mm thick withangle iron frame size 50mmx50mmx6mm with locking arrangement.(x) Painting to steel surfaces internally externally with two coats of synthetic enamel painting over a coat of the red oxide primer. |
| 41 | Material and labour for construction of masonary valve pit chamber ofsize 600mm x 600mm x 600mm (Internal dimension) complete all as specified using under mentioned specifications and shown on drawing No CEPZ/C-TD/006/13 Sheet 1/1 dated 11-09-2013 :- (i) Earth work (Excavation,Return filling & Removal) in any type of Soil.(ii)PCC (1:4:8) type D2 in foundation using 40mm graded stone aggregate.(iii)Brick work with cement mortar (1:4) using Sub class \"B\" Bricks. (iv) 15mm thick rendering to internal surfaces of chamberin CM(1:4).(v) 15 mm thick rendering to external surface of chamber upto 150mm below GL in CM(1:4)(vi) 50mm thick PCC (1:4:8) type D2 ain sub base of floor 40mm graded stone aggregate.(vii) 50mm thick floor in PCC 1:2:4 type B1 using 20mm graded stone aggregate surfaces finished even & smooth without using extra cement.(viii) Two Coats of white wash on all exposed internal & external surfaces.(ix) Mild Steel sheet cover not less than 6mm thick withangle iron frame size 50mmx50mmx6mm with locking arrangement.(x) Painting to steel surfaces internally externally with two coats of synthetic enamel painting over a coat of the red oxide primer. |
| 42 | Supply, install, test and commissioning of 30 KVA/24 KW diesel engine driven Generating set with alternator out put Voltage 415 Volts +/- 1% at set value of 415 V at a frequency 50HZ +/- 0.5% with suitable standard control panel, allmounted in acoustic enclosure andControl panel including AMF Panel as per manufacturers design and specification as per approved CPCB-IV Plus norms confirming to thedetailed specifications appended below :- (I)ENGINE(a) General: Suitable four stroke compressed ignition, radiator water cooled,Turbocharged aspiration, continuous duty with 10% overload capacity for any one hour in 12 hours running, 50°C intake air temperature, CPCB-IV Plus Euro emission engine developing 268 BHP at 1500 RPM coupled to alternator mounted on Channel Iron base frame with in built fuel tank of minimum capacitysuitable for 12 Hrs continous running. The prime mover provided should be as per IS specifications.(b) Air intake system :Should comprise of dry type intake air filter mounted on engine, one in number vacuum indicator mounted on intake piping.(c) Exhaust System: Should comprise of one exhaust manifold, dry type, mounted on engine, one exhaust residential type silencer which should be positioned in such a way that the exhaust gas is not sucked by the fan on the radiator, thereby affecting the cooling system. The silencer should cater to the noise level tolerance prescribed in the relevant IS/BS. The silencer should be provided with flaps with a provision so that it will open only when the generator is running. The complete exhaust system shall be properly supported so that entire lot of the exhaust system shall not fall on the DG Set.(d) Fuel System: Should comprise of disposal type element fuel filter, pressure type fuel pump mounted on engine, non return check valve in fuel supply and drain lines, wire braided hose between filter and pump, fuel system with suitable capacity electronic governor and engine mounted actuator. The fuel tank must have proper locking arrangement with level indicator and to be integrated with base frame.(e) Cooling System: Should comprise of radiator designed and tested for 50oC ambient temperature with 7 PSI pressure cap mounted on base rail. The thermostat installed in the engine coolant outlet, fresh water pump mounted on engine, fan and fan hub mounted on engine. A reservoir of 50% of radiator capacity to replenish coolant by gravity (as and when required) is also to be provided. |
| 43 | Item No.42(Contd...)(f) Lubricating System: Should comprise of lubricating oil sump mounted on engine, gear driven lub oil pump mounted on engine, lubricating oil cooler-fresh water cooled integral with engine cool out circuit mounted on engine, oil filter lubricating with cap and lubricating oil dip stick for oil level check mounted on engine. The system should be capable of feeding lube oil to the main end& large end bearings, cam shaft, valve rocker gear and all moving parts.(g) Starting System: Should comprise of suitable voltage DC electrical starter mounted on engine, with suitablemaintenance free batteries of capacity 12/24 V DC with suitable AH to be mounted in trays (having rubber insulation) on the main frame. It should have the provision to charge the battery from external sources during static condition and while running of the generator.(h)AC Generator :The generator shall be horizontal and foot mounted, 30 KVA, 415 Volts, 3 phase, 4 wire, 0.8 PF, 50 HZ, self excited, self regulated, brushless AC generator, suitable for an ambient temperature of 50° C with IP-23 enclosure class H insulation and temperature rise limited to class H as per following technical details(i) Type, Brush less AC Generators(ii) Output rating 30 KVA(iii) Output Voltage: 415 ± 1% under all loading conditions.(iv) Output frequency 50Hz ±0.5% up to 0.8 lagging.(v) No of Phases: 3 phase with 01 Neutral (4 wire)(vi) Mounting : Horizontal foot mounted.(vii) Enclosure :Minimum IP-23 / Drip proof and screen protected.(viii) Automatic voltage regulator.(ix) Class of insulation-\"H\" |
| 44 | Item No.42(Contd...)NOTE : Following shall be deemed to be included in cost quoted :-(i) Suitable size RCC cement concrete foundation platform of canopy base with height as required at site to mount the generator as per manufacturer\"s instructions/ recommendations. The cost of foundation bed incl earth work etc is deemed to be included in the quoted rate.(ii) Connecting existing cables, from existing panels and connecting cables , cables glands, cable lugs to new panel complete with all necessary accessories.(iii) Install on the foundation, connecting fuel lines, cable etc.(iv) Test and commissioning complete(v) The cost of control cables from engine Control panel to AMF panel shall be deemed to be included in the cost quoted.(j) BASE FRAME: Shall be stand by and fabricated with CRCA sheet metal which shall be suitable to mount the engine, alternator and radiator, channel width of base frame shall be adequate to accommodate anti-vibration pads.(k) CONTROL PANEL: Shall be indoor type manufactured with 14/16 guage CRCA sheet and is powder coated for weather-proff and long lasting finish consisting of microprocessor power command controller, Aluminium busbars with suitable capacity with incoming/outgoing terminals, indicating lamps for \"Load ON\" and \"Set Running\", instrument fuses duly wired and ferruled, MCCB of suitable rating with overload and short circuit protections , Volt meter, ammeter with selector switches, Frequency meter, energy meter,CTs and 3 Phase indicating lamps, timers etc all as per latest engineering practices.etc. complete all as specified and directed.(m) Accessories :-(i)01 No standard mechanical and electrical tool box.(ii) Internal covered tube lights. |
| 45 | Item No.42.00(Contd...)(n) Acoustic enclosure: Specially designed to meet CPCB norms 75dBA @ 1 mtr at 75% load under free field conditions. The Acoustic enclosure is made of CRCA sheets and a structural/sheet metal base with high quality noise absorbent and fire-retardant grade acoustic insulation material (P.U.Foam) complying to IS 8183 with two point lifting handles(a)Internal Lighting: Tube lights with protective mesh around it to be fitted inside the container for proper illumination(b) Doors :The enclosure will be provided with suitable doors on the side and rear to enter the enclosure during operation and maintenance.All doors will be provided with lock and handles for opening/ closing the doors, retainers for holding the panel door(p) Painting SchemeISS shade 220 olive green 1994 or all as per manufacturers specifications(q) Lifting/ Transportation arrangements :-Container with suitable corners will be provided to lift the DG set along with container.This is suitable for road/ rail/ sea transportation.(r) Trials:-Trials on site should be given as per load tests prescribed and all functional trials should be shown.Note : (i) The Engine, alternator, Control Panel, Acoustic enclosure shall be integrated unitsourced fromOEM only as per Make given in Sch \"A\"(i) Necessary foundation for installing the DG Set shall be as per manufacturers\" recommendation and cost of the same deemed to be included in the quoted rate(ii) Accessories included in manufacturers standard modules are deemed to be included in the quoted rate. |
| 46 | Supply, install, test and commissioning of 50 KVA/45 KW diesel engine driven Generating set with alternator out put Voltage 415 Volts +/- 1% at set value of 415 V at a frequency 50HZ +/- 0.5% with suitable standard control panel, allmounted in acoustic enclosure andControl panel including AMF Panel as per manufacturers design, considering 02 nos outgoing suitable for 2x75 KLD STPsand specification as per approved CPCB-IV Plus norms confirming to thedetailed specifications appended below :- (I)ENGINE(a) General: Suitable four stroke compressed ignition, radiator water cooled,Turbocharged aspiration, continuous duty with 10% overload capacity for any one hour in 12 hours running, 50°C intake air temperature, CPCB-IV Plus Euro emission engine developing 268 BHP at 1500 RPM coupled to alternator mounted on Channel Iron base frame with in built fuel tank of minimum capacitysuitable for 12 Hrs continous running. The prime mover provided should be as per IS specifications.(b) Air intake system :Should comprise of dry type intake air filter mounted on engine, one in number vacuum indicator mounted on intake piping.(c ) Exhaust System: Should comprise of one exhaust manifold, dry type, mounted on engine, one exhaust residential type silencer which should be positioned in such a way that the exhaust gas is not sucked by the fan on the radiator, thereby affecting the cooling system. The silencer should cater to the noise level tolerance prescribed in the relevant IS/BS. The silencer should be provided with flaps with a provision so that it will open only when the generator is running. The complete exhaust system shall be properly supported so that entire lot of the exhaust system shall not fall on the DG Set.(d) Fuel System: Should comprise of disposal type element fuel filter, pressure type fuel pump mounted on engine, non return check valve in fuel supply and drain lines, wire braided hose between filter and pump, fuel system with suitable capacity electronic governor and engine mounted actuator. The fuel tank must have proper locking arrangement with level indicator and to be integrated with base frame. |
| 47 | Item No.43(Contd...)(e) Cooling System: Should comprise of radiator designed and tested for 50oC ambient temperature with 7 PSI pressure cap mounted on base rail. The thermostat installed in the engine coolant outlet, fresh water pump mounted on engine, fan and fan hub mounted on engine. A reservoir of 50% of radiator capacity to replenish coolant by gravity (as and when required) is also to be provided.(f) Lubricating System: Should comprise of lubricating oil sump mounted on engine, gear driven lub oil pump mounted on engine, lubricating oil cooler-fresh water cooled integral with engine cool out circuit mounted on engine, oil filter lubricating with cap and lubricating oil dip stick for oil level check mounted on engine. The system should be capable of feeding lube oil to the main end& large end bearings, cam shaft, valve rocker gear and all moving parts.(g) Starting System: Should comprise of suitable voltage DC electrical starter mounted on engine, with suitablemaintenance free batteries of capacity 12/24 V DC with suitable AH to be mounted in trays (having rubber insulation) on the main frame. It should have the provision to charge the battery from external sources during static condition and while running of the generator.(h)AC Generator :The generator shall be horizontal and foot mounted, 50 KVA, 415 Volts, 3 phase, 4 wire, 0.8 PF, 50 HZ, self excited, self regulated, brushless AC generator, suitable for an ambient temperature of 50° C with IP-23 enclosure class H insulation and temperature rise limited to class H as per following technical details(i) Type, Brush less AC Generators(ii) Output rating 50 KVA(iii) Output Voltage: 415 ± 1% under all loading conditions.(iv) Output frequency 50Hz ±0.5% up to 0.8 lagging.(v) No of Phases: 3 phase with 01 Neutral (4 wire)(vi) Mounting : Horizontal foot mounted.(vii) Enclosure :Minimum IP-23 / Drip proof and screen protected.(viii) Automatic voltage regulator.(ix) Class of insulation-\"H\" |
| 48 | Item No.43(Contd...)NOTE : Following shall be deemed to be included in cost quoted :-(i) Suitable size RCC cement concrete foundation platform of canopy base with height as required at site to mount the generator as per manufacturer\"s instructions/ recommendations. The cost of foundation bed incl earth work etc is deemed to be included in the quoted rate.(ii) Connecting existing cables, from existing panels and connecting cables , cables glands, cable lugs to new panel complete with all necessary accessories.(iii) Install on the foundation, connecting fuel lines, cable etc.(iv) Test and commissioning complete(v) The cost of control cables from engine Control panel to AMF panel shall be deemed to be included in the cost quoted.(j) BASE FRAME: Shall be stand by and fabricated with CRCA sheet metal which shall be suitable to mount the engine, alternator and radiator, channel width of base frame shall be adequate to accommodate anti-vibration pads.(k) CONTROL PANEL: Shall be indoor type manufactured with 14/16 guage CRCA sheet and is powder coated for weather-proff and long lasting finish consisting of microprocessor power command controller, Aluminium busbars with suitable capacity with incoming/outgoing terminals, indicating lamps for \"Load ON\" and \"Set Running\", instrument fuses duly wired and ferruled, MCCB of suitable rating with overload and short circuit protections , Volt meter, ammeter with selector switches, Frequency meter, energy meter,CTs and 3 Phase indicating lamps, timers etc all as per latest engineering practices.etc. complete all as specified and directed.(m) Accessories :-(i)01 No standard mechanical and electrical tool box.(ii) Internal covered tube lights. |
| 49 | Item No.43(Contd...)(n) Acoustic enclosure: Specially designed to meet CPCB norms 75dBA @ 1 mtr at 75% load under free field conditions. The Acoustic enclosure is made of CRCA sheets and a structural/sheet metal base with high quality noise absorbent and fire-retardant grade acoustic insulation material (P.U.Foam) complying to IS 8183 with two point lifting handles(a)Internal Lighting: Tube lights with protective mesh around it to be fitted inside the container for proper illumination(b) Doors :The enclosure will be provided with suitable doors on the side and rear to enter the enclosure during operation and maintenance.All doors will be provided with lock and handles for opening/ closing the doors, retainers for holding the panel door(p) Painting SchemeISS shade 220 olive green 1994 or all as per manufacturers specifications(q) Lifting/ Transportation arrangements :-Container with suitable corners will be provided to lift the DG set along with container.This is suitable for road/ rail/ sea transportation.(r) Trials:-Trials on site should be given as per load tests prescribed and all functional trials should be shown.Note : (i) The Engine, alternator, Control Panel, Acoustic enclosure shall be integrated unitsourced fromOEM only as per Make given in Sch \"A\".(i) Necessary foundation for installing the DG Set shall be as per manufacturers\" recommendation and cost of the same deemed to be included in the quoted rate(ii) Accessories included in manufacturers standard modules are deemed to be included in the quoted rate. |
| 50 | Supply & fixing of GI strip 32 mm x 6 mm burried in ground ; complete all as specified and as directed by Engineer-in-charge. |
| 51 | Material and Labour for cutting into existing manholes for connecting new drains, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4section) in cement concrete 1:2:4 type B-1 smooth finished and reforming banching as required. Internal dia of pipe 150mm ; complete all as specified and as directed by Engineer-in-charge. |
| 52 | Manning & Operation of theSTP & SCADA (of capacity 1 x 100 KLD & 2 x 75 KLDas per srl item No 1 to 5 of this BOQ)for 11 months { PHASE - IIrefer Sch \"A\" note no.2.1(b) } ,after completion of STP & SCADA. Operating and keeping the capacity in running / operational condition by deploying FGM / technical staff to produce the treated effluent of specified quality including Sundays and holidays including all connected LT cubicle STP panel , electrical & sewage pumps items such as main switch, starter, change over switch, MCCB, voltmeter, ammeter, panel board etc, Sewage waterpump, valve system, controlling syatem, daily checking, leakage, checking noise, cleaning of plant and its surrounding area etc for a period of 11 (Eleven Months) including all holidays all as specified and directed by Engr-in-Charge. Note : - Contractor shall deploy one skilled operator (FGM) and one helper per shiftforthree shifts per day in each month for operation of each STP. |
| 53 | Manning & Operation of theSTP & SCADA (of capacity 1 x 100 KLD & 2 x 75 KLDas per srl item No 1 to 5 of this BOQ)for 11 months after completion of Phase-II { Phase-III refer Sch \"A\" note no.2.1(c) } complete.Operating and keeping the capacity in running / operational condition by deploying FGM / technical staff to produce the treated effluent of specified quality including Sundays and holidays including all connected LT cubicle STP panel , electrical & sewage pumps items such as main switch, starter, change over switch, MCCB, voltmeter, ammeter, panel board etc, Sewage waterpump, valve system, controlling syatem, daily checking, leakage, checking noise, cleaning of plant and its surrounding area etc for a period of 11 (Eleven Months) including all holidays all as specified and directed by Engr-in-Charge. Note : - Contractor shall deploy one skilled operator (FGM) and one helper per shiftforthree shifts per day in each month for operation of each STP. |
| 54 | Manning & Operation of theSTP & SCADA (of capacity 1 x 100 KLD & 2 x 75 KLDas per srl item No 1 to 5 of this BOQ) for 11 months after completion of Phase-IV { Phase- V refer Sch \"A\" note no.2.1(e) } complete.Operating and keeping the capacity in running / operational condition by deploying FGM / technical staff to produce the treated effluent of specified quality including Sundays and holidays including all connected LT cubicle STP panel , electrical & sewage pumps items such as main switch, starter, change over switch, MCCB, voltmeter, ammeter, panel board etc, Sewage waterpump, valve system, controlling syatem, daily checking, leakage, checking noise, cleaning of plant and its surrounding area etc for a period of 11 (Eleven Months) including all holidays all as specified and directed by Engr-in-Charge. Note : - Contractor shall deploy one skilled operator (FGM) and one helper per shiftforthree shifts per day in each month for operation of each STP. |
| 55 | Manning & Operation of theSTP & SCADA (of capacity 1 x 100 KLD & 2 x 75 KLDas per srl item No 1 to 5 of this BOQ)for 11 months after completion of Phase-VI { Phase-VII refer Sch \"A\" note no.2.1(g) } complete.Operating and keeping the capacity in running / operational condition by deploying FGM / technical staff to produce the treated effluent of specified quality including Sundays and holidays including all connected LT cubicle STP panel , electrical & sewage pumps items such as main switch, starter, change over switch, MCCB, voltmeter, ammeter, panel board etc, Sewage waterpump, valve system, controlling syatem, daily checking, leakage, checking noise, cleaning of plant and its surrounding area etc for a period of 11 (Eleven Months) including all holidays all as specified and directed by Engr-in-Charge. Note : - Contractor shall deploy one skilled operator (FGM) and one helper per shiftforthree shifts per day in each month for operation of each STP. |
| 56 | Manning & Operation of theSTP & SCADA (of capacity 1 x 100 KLD & 2 x 75 KLDas per srl item No 1 to 5 of this BOQ) for 11 months after completion of Phase-VIII { Phase-IX refer Sch \"A\" note no.2.1(j) } complete.Operating and keeping the capacity in running / operational condition by deploying FGM / technical staff to produce the treated effluent of specified quality including Sundays and holidays including all connected LT cubicle STP panel , electrical & sewage pumps items such as main switch, starter, change over switch, MCCB, voltmeter, ammeter, panel board etc, Sewage waterpump, valve system, controlling syatem, daily checking, leakage, checking noise, cleaning of plant and its surrounding area etc for a period of 11 (Eleven Months) including all holidays all as specified and directed by Engr-in-Charge. Note : - Contractor shall deploy one skilled operator (FGM) and one helper per shiftforthree shifts per day in each month for operation of each STP. |
| 57 | Manning & Operation of theSTP & SCADA (of capacity 1 x 100 KLD & 2 x 75 KLDas per srl item No 1 to 5 of this BOQ) for 05 months after completion of Phase-IX { Phase- X refer Sch \"A\" note no.2.1(k) } complete.Operating and keeping the capacity in running / operational condition by deploying FGM / technical staff to produce the treated effluent of specified quality including Sundays and holidays including all connected LT cubicle STP panel , electrical & sewage pumps items such as main switch, starter, change over switch, MCCB, voltmeter, ammeter, panel board etc, Sewage waterpump, valve system, controlling syatem, daily checking, leakage, checking noise, cleaning of plant and its surrounding area etc for a period of 11 (Eleven Months) including all holidays all as specified and directed by Engr-in-Charge. Note : - Contractor shall deploy one skilled operator (FGM) and one helper per shiftforthree shifts per day in each month for operation of each STP. |
| 58 | Notes for Serial Item No. 46 to 51 above :- (i)The FGMs employed by the contractor shall be ITI qualified from recognised institute having sufficient knowledge and experience i.e. minimum 02 years in maintenance / operation of similar work. The operators must be competent to carry out the repairs / maintenance of plant as required. (ii) The operators shall maintain the desired quality treated water including tracing out and rectification of minor leakages in pipe line / valves during the period. (iii)The operators shall operate elctrical equipements, pumps and maintain the STP in workable condition by checking daily leakages noise, cleaning the plant and its surrounding areas of plant as directed. (iv) The Contractor shall maintain all registers, log books,under various rules, and shall be produced to the Engineer-in-Charge as well as officers detailed by central labour department. (v) The unit rate quoted shall be deemed to be included for cost of labour for daily for daily routine maintenance for trouble free functioning of installation. (vi) The quoted rate shall be deemed to be inclusive all consumables required for operation of STP.(vii) The payment to the staff employed shall be made within first week of every month through online mode in employees respective Bank Account. No payment to contractors / firms will be made unless proof of payment of wages / EPF / ESI etc through bank account is submitted by the contractor to all employees. Contractor shall produce details of payment made to the employees along with supporting documents for the verification of Engineer-in-Charge for processing the monthly / finall bills. In case of revision in pay slab by Government during the currency of contract, same shall be paid to the employee by the contractor and accordingly rates shall be quoted.(viii) The contracor should follow the terms & conditions of E-in-C\"s br policy no 10/2023 issued vide letter No A/95533/SCADA Sewage/Pol/E2W (PPC) dt 21 Jul 2023 .(ix) Necessary spare & manpower will be provides by Contractor. (x) Desired water quality as per standard norms comply with E-in-C\"s branch direction to be achieved. |
| 59 | Comprehensive maintenance of the above STP & SCADA (of capacity 1 x 100 KLD & 2 x 75 KLDas per srl item No 1 to 5 of this BOQ) { Phase - IV refer Sch \"A\" note no.2.1(d) } ,for the period of 1styears after expiry of Defect Liability Period. The scope of comprehensive maintenance includes maintenance of complete infrastructure under this work and replacing all defective components and restoring any defect / deformity / wear and tear and comprehensive maintenance of all STP components under this job, (Sl item No. 1.00 to 5.00) including all connected LT cubicle STP panel , all pumps and DG Sets in the scope of entire tender for further period of 12 Monthsafter completion defect liability period. The scope shall also include comprehensive maintenance of all electrical & Sewage Pumps items such as main switch, starter, change over switch, MCCB, voltmeter, anmeter, panel board etc, Sewage water pump, valve system, controlling syatem, daily checking, leakage, checking noise, cleaning of plant and its surrounding area etc, as per manufacturers instructions and as specified and directede by Engineer-in-Charge. |
| 60 | Comprehensive maintenance of the above STP & SCADA (of capacity 1 x 100 KLD & 2 x 75 KLDas per srl item No 1 to 5 of this BOQ) { Phase - VI refer Sch \"A\" note no.2.1(f) } ,for the period of 2nd years after expiry of first year of Defect Liability Period. The scope of comprehensive maintenance includes maintenance of complete infrastructure under this work and replacing all defective components and restoring any defect / deformity / wear and tear and comprehensive maintenance of all STP components under this job, (Sl item No. 1.00 to 5.00) including all connected LT cubicle STP panel , all pumps and DG Sets in the scope of entire tender for further period of 12 Months after completion defect liability period. The scope shall also include comprehensive maintenance of all electrical & Sewage Pumps items such as main switch, starter, change over switch, MCCB, voltmeter, anmeter, panel board etc, Sewage water pump, valve system, controlling syatem, daily checking, leakage, checking noise, cleaning of plant and its surrounding area etc, as per manufacturers instructions and as specified and directede by Engr-in-Charge. |
| 61 | Comprehensive maintenance of the above STP & SCADA (of capacity 1 x 100 KLD & 2 x 75 KLDas per srl item No 1 to 5 of this BOQ){ Phase - VIII refer Sch \"A\" note no.2.1(h) } ,for the period of 3rdyears after expiry of second year of Defect Liability Period. The scope of comprehensive maintenance includes maintenance of complete infrastructure under this work and replacing all defective components and restoring any defect / deformity / wear and tear and comprehensive maintenance of all STP components under this job, (Sl item No. 1.00 to 5.00) including all connected LT cubicle STP panel , all pumps and DG Sets in the scope of entire tender for further period of 12 Months after completion defect liability period. The scope shall also include comprehensive maintenance of all electrical & Sewage Pumps items such as main switch, starter, change over switch, MCCB, voltmeter, anmeter, panel board etc, Sewage water pump, valve system, controlling syatem, daily checking, leakage, checking noise, cleaning of plant and its surrounding area etc, as per manufacturers instructions and as specified and directede by Engr-in-Charge. |
| 62 | Notes for Serial Item No. 52 to 54above :- (a) Comprehensive maintenance includes replacement of all defective/ worn out / damaged parts including MBR membrane with new parts and nothing extra shall be paid on this account except the payment specified in this item. (b) The contractor shall be responsible for periodic maintenance as per maintenance schedule and specified including renewal/ replacement of parts, lubricants, fittings / fixtures filling of bacteria etc required for smooth functioning of the plant as per manufacturers instructions. (c) The rate quoted shall be deemed to be inclusive of safety gear & required tools for maintenance. (d) The quoted rate is deemed to be inclusive of tool & testing instruments required for operation & maintenance of STP plant.(e) The sludge cakes procured after treatment shall become contractors property and shall be removed from premises of STP as early as possible. The rate shall be quoted accordingly. |
| SR No | FileName | File Description |
| 1 | Click here to download tender document | Tender Documents |
| 2 | Click here to download tender document | Tender Documents |
| 3 | Click here to download tender document | Tender Documents |
| 4 | Click here to download tender document | Tender Documents |
We are a group of professionals specializing in custom software development, web development, mobile app development, IOT base solutions, web design, graphics & Enterprise solutions provid.
Copyright © 2025 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
