|
| 1 | Demolition of brick work built in cement mortar in any description and position, complete all as specified and directed |
| 2 | M&L for brick work with sub class \"B\" brick straight or curved on plan exc6 metre mean radius with old size bricks, built in cement mortar 1:6,complete all as specified and directed |
| 3 | All as per the descritpion of srl item no 02 before but except bricks |
| 4 | M&L for brick work with subclass \"B\" bricks, straight or curved on plan to any radius in half brick thick walls with old size bricks, built in cement mortar1:4,complete all as specified and directed |
| 5 | M&L for cement concrete 1:2:4 type B1 (using20mm graded stone aggregate) as in blocks for hold fast, coping,benching etc. including weathering, slightly rounded or chamfered angles or throating including form work to concrete surfaces, complete allas specified upto six storey height. |
| 6 | Taking down cement plaster in concrete or brick wall surface of any thickness from brick or stonewalls etc including raking out joints, hacking for key, scrubbing down with water etccomplete all as specified and directed |
| 7 | M&L for ready mix plaster of 15mm thick on brick or conc surfaces incl necessary cement slurry with bulk density 1.40 to 1.70 kg, water ratio 17 to 19% by weight & compressive strength as per IS 4031 part 6 applied as per manufacturer instructioncomplete all as specified and directed |
| 8 | M&L for ready mix plaster of 10mm thick on brick or conc surfaces incl necessary cement slurry with bulk density 1.40 to 1.70 kg, water ratio 17 to 19% by weight & compressive strength as per IS 4031 part 6 applied as per manufacturer instruction. |
| 9 | M&L preparation of newly plastered surface applying three coats of white lime wash onwalls complete all as specified and directed . |
| 10 | M&L Preparation of newly plastered surface applying two coats of Cement based paint onwallscomplete all as specified and directed |
| 11 | M&L for preparation of newly plastered surface applyingtwo coats of oil bound distemper with roller brush (white or tinted) on plastered wall surfacescomplete all as specified and directed |
| 12 | M&L complete removal of existing treatment of old surface with two coat of oil bound distemper on walls / ceiling incl preparation of old plastered surface complete all as specified and directed |
| 13 | M&L resecuring or Easing and adjusing without taking down of doors/windows for easy opening /closing ,tightening of hinges and changing its position or adjustment of tower bolts/sliding bolts etc area exc. 1sqm but not exc. 2 sqm each,complete all as specified and directed. |
| 14 | M&L for 2nd class hardwood plain, solid straight chowkats and frames, wrought, framed, rebated on the solid, rounded or chamfered, put together with glue, pinned at joints,complete all as specified and directed |
| 15 | Taking down chowkats or frames n.exc 1.5 sqm each with shutters (without taking off shutters from frames), complete all as specified and directed |
| 16 | Taking down chowkats or frames exc. 1.5 Sqm and n.exc 4 Sqm eachwith shutters (without taking off shutters from frames ),complete all as specified and directed |
| 17 | Taking down shutter of any description exc 1 sqm and not exc 2 sqm each,complete all as specified and directed |
| 18 | Taking down shutter of any description exc 1 sqm and not exc 2 sqm each, and refixing in same openingcomplete all as specified and directed |
| 19 | S& F 30mm thick flush shutterssolid core construction, with block board core and plywood face pannel, commercial type on both sides. Flush shutters shall have teak wood edgingcomplete all as specified and directed |
| 20 | S&F 30mm thick 2nd class Hard woodrail & style , plain, framed, panelled shutter (two panel) with lock rail & panel of 12mm veneered particle board with commercial veneering on both sides.The size of rail & style as per IS :1003 (Part I), Kilan seasoned & chemicals pressure treated,complete all as specified and directed |
| 21 | M&L for 30mm thick 2nd class hard wood glazed and skelton door shutter, open rebated and prepared to receiveglass/guage etc. (without sash bar) edge of frames plain, chamfered or rounded, fitted with cut & mitred beads for securing glass/guage etc size of member as specified in SSR Part I Section 8 clause 20(a) and fixed to chowkat,complete all as specified and directed |
| 22 | S&F fiber Glass Reinforced plastic (FRP) Door Frames of cross section 90mm x 45mm having single rebate of 32mm x 15mm to receive shutter of 30mm thickness. The laminte shall be moulded with fire resistant grade unsaturated polyester resin and chopped mat. Door frame laminate shall be 2mm thick and shall be filled with suitable wooden block in all the three legs. The frame shall be covered with fiber glass from all sides. M.S. stay shall be provided at the bottom to steady the frame., complete as specified by the manufacturer and as per directions. |
| 23 | S&F factory Made Solid PVC doubledoor frameof size 120mm x 50mm with a wall thickness of 5mm (+0.25) made out of extruded 5mm (+0.25) thick prelam PVC sheet of density 600kg/cum manufactured by an ISO-9001-205 certified company ,and by joining 3 Nos. heat moulded PVC section, The Hinge section of size 35 x 35mm shall be made from plain colour PVC sheet of 5mm (+0.25) thickness, the inside section will be covered with 5mm thick PVC sheet C shape covering section ofsize 120mm x 50mm. At centre top section of 5mm (+0.25) thick 50x50x50mm pattam section should be pasted with solvent cement adhesive to make double pattam of frame. The frame shall be mitre cut at two corners and joined with 4 Nosof 150mm long L brackets of 19mm x 19mm M.S square tube or joint by fusion heat welding. The two vertical doors frames are to beshall be reinforced with 25mm x 25mm M.S. square tube of 19 gauge through out the frame. The door frame shall be fixed to wall using 8/100mm long M.S Screws through the frame by using PVC fasteners. A minimum of 4 nos. of screws to provided for each vertical member & minimum 2 nos. for horizontal member etccomplete as per manufacturers specifications and direction. |
| 24 | S&F fibre glass Reinforced Plastic(FRP) Door shutter shall 30mm thick glossypanelled door shutter of required colour and approved brand and manufacturer . Made with retardant grade unsaturated Poyester resin moulded to 3mm thick FRP laminate for forming hollow rails and styles with wooden frame and suitble blocks of seasoned wood inside at required places for fixing of fittings , cast monolithically with 5mm thick FRP panels and confirming to IS 14856-2000 complete all as specified and directed |
| 25 | S&F Factory made solid panel pvc doorshutter 30mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement. The door frame shall be fixed to wall using 8/100mm long M.S Screwsthrough the frame by using PVC fasteners. A minimum of 4 nos. of screws to provided for each vertical member & minimum 2 nos. for horizontal member etc |
| 26 | S&FSolid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tubecomplete all as specified and directed |
| 27 | S&F mild steel work as in hold fast 25x3mm flat iron and similar articles conforming to Fe-410-0, complete all as specified. |
| 28 | Dismantling boarding any description (board/plywood) fixed in any position with screw,complete all as specified and directed |
| 29 | S&F 18mm to19mm thick factory made PVC moulded solid board one side pre-laminated for cabinet boxes, crockery almirahs, books shelves etc with self and shutter full size fitted under/above the kitchen cooking platform and other rooms directed incl provn of fixing arrangement etc, complete all as specified and directed. |
| 30 | S&F 100mm long(size) butt hinges, medium weight, cold rolled mild steel,complete all as specified and directed |
| 31 | S&F 75mm long(size) butt hinges, medium weight, cold rolled mild steel,complete all as specified and directed |
| 32 | S&F continuous (Piano) hinges, mild steel, bright finish or electrogalvanised, width of flaps (when open) 30 mm,complete all as specified and directed |
| 33 | S&F in repairs 75mm long L Bihari concealed type hydrauilc hinges incl stainless screw complete all asspecified. |
| 34 | S & F in repairs 150mm size double action spring, hinge, mild steel with steel wire spring, stove enamelled black, complete all as specified. |
| 35 | S&F 300mm long, aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts andsliding bolts of extruded section or cast aluminiumalloy and fixed, complete all as specified. |
| 36 | S&F in repair 300mm long, aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts andsliding bolts of extruded section or cast aluminiumalloy and fixed, complete all as specified.make- |
| 37 | S&F 150mm long aluminium anodised barrel tower boltofextruded section, complete all as specified. |
| 38 | S&F 200mm long aluminium anodised barrel tower boltof extruded section, complete all as specified. |
| 39 | S & F in repair 200mm long (size) aluminium anodised, barrel tower bolt of extruded section and fixed, complete all as specified. |
| 40 | S&F 150mm size extruded aluminium alloy handle, fabricated type, anodised, complete all as specified. |
| 41 | S&F in repairfloor door stopper aluminium body double tounge anodised with hard drawn steel spring 140mm long complete all as specified. |
| 42 | S&F in repair Hasp and staple, 75mm size, safety type, brass with mild steel hinge pin including bolt to hinge plate & fixed withscrews, complete all as specified. |
| 43 | S&F in repairs 75mm long, extrruded fancy type SS handle for kitchen cup boards shutters, cabinets, crocery shelf drawers fixed with nuts , screw and washer of mild steel bright finished , complte all as specified. |
| 44 | S&F ball catches with 8mm dia steel ball and brass body and striking plate including letting in and fixed, complete all as specified. |
| 45 | S&F Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with steel wire staples, complete all as specified and directed. |
| 46 | S&F in repair Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed stainless steel wire staple, complete all as specified and directed. |
| 47 | S&F 4.00mm thick plain sheet glasswith wooden beads, PVC beading, aluminium beads, in square n.exc 0.5 Sqm in each pane,complete all as specified and directed |
| 48 | S&F4.00mmthick figured glass, pin head type andglazing with wooden beads, glass putty, PVC beading, aluminium beads,complete all as specified and directed |
| 49 | S&F 5.5mm thicksheet glass ordinary quality in square n.exc 0.5 Sqm each including grinding of edges for crockery cupboard including taking out/ broken glass with roller,complete all as specified and directed |
| 50 | S&F mild steel 150mm ordinary rat tail , rod pattern springs including roller and roller platecomplete all as specified and directed |
| 51 | S&F in repair mild steel 150mm ordinary rat tail , rod pattern springs including roller and roller plate complete all as specified and directed |
| 52 | S&F in repair double aluminium channel size 10mm x 20mm x 2mm,complete all as specified and directed |
| 53 | S&F MS roller with \"C\" shape staple, chromium plated for 5.5mm thick sheet glasscomplete all as specified and directed |
| 54 | S&F Stainless steel drapery curtain rods gold or antique silver 25mm nominal dia of approved quality with two number decorative brackets design as approved fixed in brick/concrete wall with same finished knobs/latto on each end of curtain rod incl taking down old pelmet complete all as required and directed. |
| 55 | M&L for Preparation of new or previously untreated wood and wood based surfaces of any description not otherwise described over 10cm width girth and applying two coats of synthetic enamel paint over a coat of pink primer,complete all as specified and directed |
| 56 | M&L for Preparation of oldpainted surfaces of wood and wood based surfaces of any description over 10 cm width or girth and applying one coats of synthetic enamel paint,complete all as specified and directed |
| 57 | Dismantling of stone slabs and tiles of any description or thickness in floors, aprons etc laid, bedded and pointed in any mortar,complete all as specified and directed |
| 58 | Taking down cement plaster, terrazzo dado in any thickness from brick or stonewalls etc including raking out joints, hacking for key, scrubbing down with water etc including removal of rubbish,vegitation outside complex (MOD land),complete all as specified and directed |
| 59 | M&L for coloured ceramic tiles (Non skid) of size 300x300x 6 to 7mm thick as in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement over 15mm thick screed bed in CM 1:6complete all as specified and directed |
| 60 | M&L for colouredglazed ceramic tiles 300x600 x 7 to 8mm / 300x450 x 7 to 8mm thick as in vertical surfaces of wall as dado/skirting, set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 10mm thick rendering in CM 1:4 complete all as specified and directed. |
| 61 | M&L for 16mm to 18mmthick black granitestone work (table rubbed and polished) laid over and including 15mm thick screed bed or bedding layer in CM 1:4 as in steps, Jambs, pillars, window clips, cooking platforms and like,inlcuding pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite, front and side of slab moulded and polished complete all as specified and directed. Granite stone slab shall be laid in single piece with rounding of edgesand a grove shall be provided beneath the projection portions of stone slab and provn of hole for gas pipe shall be providedcomplete all as specified and directed |
| 62 | S&F powder Coated Anodised aluminium frame for doors, windows, ventilators with one or more rebates including aluminium alloy Powder coated standard 10mmsection window grill as per approved sample and as per IS specificationsjoining cleat for fixing etc.complete all as specified and directed |
| 63 | S&FPowder aluminium window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.),hinges type B-21 100mm long (2no.) suitable handle ,(01 no.)complete all as specified and directed |
| 64 | S&F Steel windows and ventilators with side hung glazed and wiremesh shutters with Z section including projecting type hinge with steel handle and steel peg stay, complete with glazing bars, dovetailed or weldedcomplete all as specified and directed. |
| 65 | Taking up or down 15mm dia GI tubing and connections complete all as specified and directed |
| 66 | Taking up or down 20mm dia GI tubing and connections including cleaning for re-fixing,complete all as specified and directed |
| 67 | S&L of CPVC pipes 20mm outer diameter SDR 11 & Plain/brass CPVC SDR 11 fittings on walls/ceiling or laying in floors,complete all as specified and directed |
| 68 | S&F 20mm dia GI tubing medium grade with all fittings and fixed to wall and ceiling or laid in floors etc complete,complete all as specified and directed |
| 69 | S&F factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of 30mmthick size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In-Charge.Note:- stainless steel butt hinges and necessary S S screws shall be paid separately) complete all as specified. |
| 70 | S&F actory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 45 x 70mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately). Note:- For WPC solid door/window frames,minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made. complete.all as specified and directed. |
| 71 | S&F anodised aluminium Jointless three track window (two shutters glazed & one shutters wire gauge) with frame, glazed with 4mm thick tinted glass and wire guage with stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm including rubber bead joining cleat for fixing in position, concealed type lock for all three shutter, PVC roller etc all as specifiedNote:- The unit rate quoted by contractor includes cost of glass, wire mesh andall other connected accessories , complete all as specified and directed. |
| 72 | S&F framed work as in doors or gates of angle or other section with gusset plates,rails,braces, etc.,complete drilled for fixing of steel sheeting in or other covering. doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings and hanging; also fastening and fixing complete, confirming; Fe 410-W. all as specified and directed |
| 73 | DismantlingWall & ceiling boards any thickness, including cover fillets, Frame work etccomplete all as specified and directed |
| 74 | Providing & fixing false ceiling at all heights with GRG (Glass Fibre With Reinforced Gypsum) false ceiling tiles fully perforated 12mm thick micro tegular edged or 10mm thick square edged of Size 595 x 595mm of approved texture, design and patterns having moisture content less than 2%, humidity resistance of 99%, NRCO.50 to 0.75 as per IS 8225:1987, Noncombustible as per BS tiles 476 (part 4 )-1970 and light reflectance of 85% (minimum) to be laid in true horizontal level suspended on inter- locking metal T-Grid of hot dipped galvanized iron section of 0.33mm thick (galvanized @ 120 grams per sqm including both sides) comprising of main- T runners of size 15 x 32mm of length 3000mm,cross-T of size 15x 32mm of length 1200mm and secondary intermediate cross-T of size 15 x 32mm of length 600mm to form grid module of size 600x 600mm, suspended from ceiling using galvanized mild steel items (galvanizing @ 80 grams per sqm) i.e 50mm long, 8mm outer diameter M-6 dash fasteners, 6mm dia fully threaded hanger rod upto 1000mm length and L- shape level adjuster of size 85mm x 25mm x 2mm. Galvanised iron perimeter wall angle of size 24x 24x0.40mm of length 3000mm to be fixed on periphery wall / partition with the help of plastic rawl plugs at 450mm center to center and 40mm long dry wall wood screws. The work shall be carried out as per specifications, drawing and as per direction. |
| 75 | S&F Factory made double rebated single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 65mm x 125mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately). Note:- For WPC solid door/window frames,minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made. complete.all as specified and directed. |
| 76 | M&L providing WPC jallies 24mm thick incl fixing materials and frame work & taking down old RCC jallies complete all as specified and directed. |
| 77 | S&F 30m thick Factory made wire mesh solid WPC Door shutter consisting of density 650 kg/Cbm manufactured by an ISO-9001-2015 Certified company to be paneled with SS mosquito mesh and XTN aluminium mesh for additional strength safety purpose (conforming as perIS : 4020) The door should be water proof termite proof fire fire proof and having screw holding capacity. Door to be fixed to frame with 3 nos hinghs size 100mm x 25mm x 2mm and 32mm long steel screws drilled suitable to other hardwares shouldbe fixed with 19x6mm size steel screw etc complete all as specified and directed. |
| 78 | M&L for Matt finish Exteior wall tiles 8 to 10mm thick ¬ exc 0.18 sqm , colour & shade of tiles as approved by Engr-in-charge,set and jointed in neat cement slurry and pointed in colouredcement to match the surface etc complete all as specified and directed. |
| 79 | Preparing old decorated/plastered or un-plastered surfaces of walls by scrapping the surfaces and steel wire brushing down smoke soot,mould,mass and efflorescence salts and trading oil and greasy spots etc and applying one coat of Acrylic exterior emulsin paintcomplete all as specified and directed |
| 80 | M&L for preperation of old plasterd or unplasterd surfaceand applying two coats of cement base paint of approved tint over a coat of acrylic primer complete all as specified and as direcred. |
