|
| 1 | Taking down chowkaths or frames Exc 1.5 sqm but n.exc 4 sqm(without taking off shutter from the frame) each and removing from the site including dismantling brick work for hold fasts etc complete all as specified and directed |
| 2 | Taking down chowkaths or frames n.exc 1.5 sqm (without takingoff shutter from the frame) each and removing from the site including dismantling brick work for hold fasts etc complete all as specified and directed |
| 3 | Taking down shutters of any description exc 1 sqm each but n. exc 2 Sqm each and removing from the site complete all as specified and directed |
| 4 | S&F of 35mm thick 2nd class hard wood factory made, plain, framed, panelled shutter with lock rails and panel of 9mm BWP comercial ply or 12 mm thick veneered particle board with comercial veneering on both faces. The size of rail and style as per IS-1003 Part-I klin seasoned and chamicaly pressure treated complete all as specified and directed |
| 5 | S&F of factory made 35mm flush shutter, solid coare construction, with block board core and plywood face panels, commercial type on both side etc complete all as specified and directed |
| 6 | S&F of 35mm thick 2nd class hard wood factory made, plain, framed, panelled shutter with lock rails and panel of 9mm BWP comercial ply or 12 mm thick veneered particle board with comercial veneering on both faces. The size of rail and style as per IS-1003 Part-I klin seasoned and chamicaly pressure treated complete all as specified and directed |
| 7 | S&F for factory made 35mm thick 2nd class hard wood gauged and skeleton shutter open rebated and prepared to received gauge etc (without sash bars) for fly proof door shutter, edges of framing plain, chamfered or rounded, fitted with cut of any mitred beads for securing gauge etc, size of members of shutter as specified in SSR Part-I section 8 clause No.8.23(a) and fitted to chowkats complete all as specified and as directed. |
| 8 | S&F ofsolid PVC door frame of size 50mm x 47mm made out of 5mm thick plain colour printed PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing complete all as specified and directed |
| 9 | S&F of Factory made solid panel pvc doorshutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing. |
| 10 | S&F Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/Chowkhat of size 45 x 70 mm comprisin of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately) all as spd and as directedNote:- For WPC solid door/window frames, minus 5mm tolerance in dimension i.e.depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made. |
| 11 | S& F Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter of size 30mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved designpasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of requiredsize with necessary full body threaded star headed counter sunk S.S screws, complete all as specified and directedNote:- stainless steel butt hinges and necessary S.S screws shall be paid separately |
| 12 | M&L for providing & fixing factory made solid PVC cup board/kitchen cabinet frame of size 50mm x 47mm with a wall thickness of 5mm made out of extruded 5 mm thick prelam/plain colour PVC sheet reinforce with 19mm x 19mm MS square tube of 19 gaugethickness throughout the frame and metre cut at two cornersand jointed with 2 nos of 150mm long brackets of 15mm x 15mm MS square tubes.The door frame shall be fixed to the wall using 100mm long MS screws through the frame by using PVC fasteners. A minium 4 nos of screws to be provided for each vertical memberand minium 2 nos of screws to be provided to the horizontal mmember etc.complete all as specified and directed |
| 13 | M&L for providing & fixing factory made solid PVC cup board/kitchen cabinet shutter (Flush type) of 24 mm thick made from co-extruded 3 layer regid PVC foam sheet (single extruded) with density not less than 600kg/cbm outer layer (.8-1mm) thick should be of rigid PVC with density of not less than 1400kg/cbm manufactured byan ISO 9001-2015 certfied company. Door should be water proof, turmite proof, fire retardantand having good screw holding capacity complete all as specified and directed. |
| 14 | M&L for providing and fixing factory made PVC shelf/partitation of required size consisting of 20mm thick solid PVCsandwichpanelwith 1mm thick plain PVC sheet on both sides suitably fixed incomplete all as specified and directed |
| 15 | S&F for 125 mm Hasp and staple, safety type, aluminium anodisedwith mild steel hinge pin including bolt to hinge plateand fixed with screwscomplete all as specified and directed |
| 16 | S&F 75mm long Aluminium anodised, barrel tower bolts of extruded section and fixed complete all as specified and directed |
| 17 | S&F Fiber Glass Reinforced plastic (FRP) Door Frames of cross section 90 mm x 45 mm having single rebate of 32 mm x 15 mm to receive shutter of 30 mm thickness. The laminte shall be moulded with fire resistant grade unsaturated polyester resin and chopped mat. Door frame laminate shall be 2mm thick and shall be filled with suitable wooden block in all the three legs. The frame shall be covered with fiber glass from all sides. M.S. stay shall be provided at the bottom to steady the frame, complete as specified by the manufacturer and as per direction. |
| 18 | S&F 30mm thick Fiberglass Reinforced Plastic (F.R.P.) flush door shutter in different plain and wood finish made with fire retardant grade unsaturated polyester resin, moulded to 3 mm thick FRP laminate all around, with suitable wooden blocks inside at required places for fixing of fittings and polyurethane foam (PUF)/Polystyrene foam to be used as filler material throughout the hollow panel, casted monolithically with testing parameters of F.R.P. laminate conforming to table 3 of IS: 14856 complete all as specified by the manufacturer andcomplete all as specified and directed |
| 19 | M&L in repair for 18/19 mm thick Prelaminated particle board, interior grade,prelaminated bothside with decorative choice lamination & other side balancing white lamination,fixed with screws to timber frame work all as spd as directed. |
| 20 | Supply only mild steel butt hinges, medium weight cold rolled of size 100mm complete all as specified and as directed. |
| 21 | S&F 200 mm long Aluminium anodised barrel tower bolts of extruded section and fixed complete all as specified and directed |
| 22 | S&F aluminium alloy anodised sliding door bolt 250 mm long with hasp & staple (bolt type) and fixing clips of sheet cast or extruded section and fixing bolts and sliding bolts of extruded section complete all as specified. |
| 23 | S&F 100mm butt hinges stainless steel complete all as specified and directed. |
| 24 | S&F aluminium anodised extruded fabricatedtype handle 150mm long complete all as specified. |
| 25 | S&F 150mm long Aluminium anodised barrel tower bolts of extruded section and fixed complete all as specified . |
| 26 | S&F box type mild steel window glazed/gauzed incl frame made of hollow section 60x25x1.25 mmthick 50mm x 20mm x 1.25mm thick MS hollow pipes as in windows shutter with or without sash bar incl 150mm size MS tower bolts 2 Nos each leaf, MS handle made of Z section 100 mm long 2 Nos each leaf,mild steel cheat 55 mm x25mmx75mm long 2 Nos each leaf,mild steel cleat 55 mmx25mmx75mm long,MS pintel hing 75 mm long 14 mm dia 02 Nos each leafcomplete all as specified and as directed. |
| 27 | S&F steel ventilator top hung shutter including hinges, steel peg stay, fixing lugs etccomplete with or without glazing bars incl taking down of old steel ventilators of any size complete all as specified and directed |
| 28 | Providing and fixing factory made uPVC white colour Sliding window Three track made of extruded profiles with wall thickness of 2.3mm (+ -0.2mm). Window profile with hollow section with multi chamber. Frame (88mm x 52mm), sliding sash (42mm x 67mm). Sliding mesh Sash (42mm x 57mm) Sliding interlock (One vertical length in each shutters) (45.5mm x 28mm), Glazing bead (24.5mm x 16mm) will be miterd cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware. EPDM gasket, 1.2+ -0.2mm thick galvanised steel Frame (30mm x 18mm) 2 nos, sliding sash (30mm x 18mm), sliding mesh sash (26mm x 10mm) profile to be inserted in required profile, frame will be fixed to the wall with 8mm x 100mm long fasteners, Hardware [Touch Lock of zinc alloyed (white powder coated), steel roller system. Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and required accessories. Note:- The unit rate quoted by contractor excludes cost of glass and includes all other connected accessories. Net Opening will be measured lor payment purpose.) area not exceeding 2.00 sqm each all as specified as directed. |
| 29 | Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed |
| 30 | M&L for mild steel framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; fixed type window frame , door chowkath,framework of water tanks and similar work con- forming to Fe.290.Gde-E-165 |
| 31 | S&F Powder coatedaluminium window sliding type three track (2 glazed & one gauze shutter ) aluminium sections weighing not less than 1.67kg/m for frame and 0.55 kg/m for shutter including necessary jointing cleats, glazingcleats, rubber packing , screws, handle, locking arrangement and 5.5mm thick plain/tinted glass and aluminium mosquito proof gauge including taking down of old existing steel window and making good disturbed surface of wall complete all as specified and as directed. |
| 32 | S&F Powder coated aluminium louvered ventilators of size n exc 0.50 Sqm area with glass louvers, without sash bars of aluminium sections weighing not less than 0.605kg/m for frame of size 40x20x2mm including necessary jointing cleats, glazingcleats, rubber packing , anodised aluminium snap beading,screws, anodised aluminium fittings and 5.5mm thick tinted glass fixed in panels with suitable locking arrangementsincluding taking down of old existing steel ventilator and making good disturbed surface of wall complete all as specified and as directed. |
| 33 | S&F powder coated aluminiumgrill (DG 104) guard bar mesh size not less than 65mmX65mm with dia of bar not less than 8 mm thickfixed to flat aluminium windowscomplete all as specified and as directed. |
| 34 | Demolition of wall and ceiling boards (fibre, pulp, insulation etc) or insulation boards/slabs/blankets any thickness including cover fillets complete all as specified and directed |
| 35 | M&L for Gypsum board 12 mm thick (Gyproc) for seamless false ceiling to flat surface fixed with screw over and including Gl frame work comprising of Gl perimeter channel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre / intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centreincluding finishing the joint of face board with specially formulated jointing compound & 48 mm wide fibre tape to provide seam less finish complete as per manufacturer instruction. |
| 36 | S&F for Gypsum Board 12 mm thick cornices up to 100 mm wide along the false ceiling on vertical surfacesfixed with cadmium plated screw, design as approved by GE. |
| 37 | M&L applying two coat of plastic emulsion paint on wall/ceiling surfaces of any description over 10 cm girth or width not other wise described over a coat of primer over two coat of wall care puttycomplete all as specified and directed |
| 38 | Taking down Wall panelling and similar work as specified as diracted. |
| 39 | S&F Solid PVC Wall Lining consisting of 5mm thick Single Side Prelamcolour PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specificationsand drawing complete all as specified and directed |
| 40 | S&F 5mm thick PVC sheet fillet of width35mm for wall paneling inclusive offixing on to wall to make PVC Frame as per specification and drawing complete all as specified and directed |
| 41 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises including taking downcement plaster complete all as specified and directed |
| 42 | M&L for 18mm to 20mm thick granite (of any type) work (table rubbed and polished) in steps, Jambs, pillars, window cills, cooking platforms,corner shelf,Flat shelf and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite and including 15 mm thick cement plaster (1:6)including roundingt the exposed surfaces of granite complete all as specified and directed |
| 43 | M&L for non skid coloured joint free ceramic tiles 7mm to 8mm thick (Square/rectangular) area of each tile exceeding 0.11 Sqm but n. exc. 0.18 Sqm, in floors etc. set and jointed in neat cement slurry over 15mm thick screed bed or bedding layer in CM (1:6) as in floor and pointed in whiter or coloured cement to match as in floor complete all as specified and directed. |
| 44 | M&L Glazed ceramic coloured tiles in vertical surface/dado of size 450x350x7mm/300x600x7-8mm thick set and jointed in neat cement slurry and pointed white or colour cement to match complete all as specified and directed |
| 45 | S&Fforcoloured non skid ceramic tiles 7mm to 8mm thick (Square/rectangular) area of each tile exceeding 0.18 Sqm but not exceeding 0.38 Sqm, in floors/skirting etc set and jointed in neat cement slurryover 15mm thick screed bed or bedding layer in CM (1:6) as in floor and pointed in whiter or coloured cement to matchcomplete all as specified and as directed |
| 46 | M&L for rendering 10mm thick on fair faces of brick work or concrete surfaces to recive a wall tiles using cement morter 1:4complete all as specified and directed |
| 47 | S&F in repair1.00 mm thick stainless steel plate rack of size 31\"x30\"x10\" complete all as specified and directed. |
| 48 | S&Fin repair sinks with drainage board made of stainless steel 1 mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantileverbrackets and connecting union to pipe overall size 915mm x 460mmbowl size 410mm x 330mm x160mm all as specified and as directed. |
| 49 | Taking up or down steel tubing and connections, including cleaning for refixing or removal to store of 15 mm bore complete all as specified and directed |
| 50 | S&F of Tubes, medium grade, 15mm bore, galvanised, with all fittings and fixed complete to wall and ceilings or laid in floors complete all as specified and directed |
| 51 | Refixing of old steel tubing and conections in new or old position (wall, ceiling, floors, etc) of 15mm bore complete all as specified and directed |
| 52 | Cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels etc., and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exceeding 10 cm girth in brick walls complete all as specified and directed |
| 53 | S&F in repairs Bib taps fancy type cast copper alloy, chromium plated for 15mm bore pipe, screwed for iron pipes or for brass ferrule all complete as specified and as dierected. |
| 54 | S&F in repairfancytype pillar taps, cast copper alloy with capston heads, chromium plated, screwed down high pressure, with or without lettered hot or cold with long screwed shanks and fly-nuts, screwed for iron pipe 15mm bore complete all as specified and directed |
| 55 | S&F in repair for 15mm bore brass chromium plated fancy type long body bib cock with wall flange fixed complete all as specified and directed . |
| 56 | S&F in repair 75 mm PVC (SWR) floor trap, plain with grating including jointing with solvent cement complete all as specified and directed |
| 57 | Taking down PVC pipe incl all fittings complete all as specified and directed |
| 58 | S&F 75mm dia PVC SWR pipes single socketed in any length with rubber ring joints, fixed to wall complete all as specified and directed |
| 59 | S&F 75mm dia PVC SWR bends of any radius with out access door complete all as specified and as directed |
| 60 | S& F in repair 25mm dia SS curtain rod with require brackets, finials, decorative peace on ends with teak finish apearance as in repairs complete all as directed. |
| 61 | M&L for preparation of new of previously untreated steel and Iron surface of any description, not otherwise described over 10 cm width or girth and applying two coats of Synthetic enamel paint over one coat of red oxide primer complete all as specified and as directed. |
| 62 | M&L for preparation of new or previously undecorated wooden surface of any description, not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over one coat of Pink primer complete all as specified and as directed. |
| 63 | Hacking out old broken unserviceable glass panes (any thickness, size, quality or description) for metal frame including punching or drilling out old glazing pins/spring clips and providing & fixing new one. |
| 64 | S&F of 4mm thick sheet glass, ordinary quality and glazing with oil putty in square n.exc 0.5 sqm in each pane complete all as directed. |
| 65 | Supply & fixing 4mm thick Figured glass, pin head type and glazing with oil putty in squares n exc 0.5 sq. m in each pane complete all as specified |
| 66 | M&L for PCCtype C-1, 1:3:6 using 20mm graded aggregate as in bed block for fixing of hold fast, filling concrete inframe filling , gaps in between glazed & fly proof steel window, cills, railling up to 60 cm in height etc including necessary form work as required all complete all as specified |
| 67 | S&F stainles steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm complete all as specified |
| 68 | S&F in repair stainles steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm complete all as specified |
| 69 | Demolition of brickwork built in cement mortar including all quions, arches, pillars etc complete all as specified and as directed. |
| 70 | M&L for brick works withsub class \"B\" bricksstraight or curved on plain exc 6 m mean radius built in cement mortar 1:6 complete as directed. |
| 71 | All as per the description of srl Item No. 70 above but without bricks complete all as Specified. |
| 72 | Taking down cement plaster on wall of any desription incl racking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed. |
| 73 | M&L for 15mm thick plaster of cement mortar (1:4) rendering on fair faces of brick work in two layers (10mm& 5mm) mixed with water proofing compound in top layer 200 ml per beg of cement or as per manufacturer\"s instructions finishing the surface fair and even without using extra cement complete all as specified and as directed.Note:- WPC will be measured and paid separately |
| 74 | M&L for rendering 5 mm thick cement plaster on ceiling cement mortar(1:3) complete all as specified and as directed. |
| 75 | M&L for rendering 15 mm thick plastering in Cement mortar (1:6) on fair/unfair faces of brick masonryfinished even and fair complete all as specified and directed. |
| 76 | Supply onlyliquid water proofing compoundcomplete all as specified and as directed. |
| 77 | M&L forpreparation of newly ceiling plastered surfaces and applying three coats of white wash on wall as specified as diracted. |
| 78 | M&L for two coat ofacrylic distemper over one coat of wall putty onnew surface of wallinclude brooming down or steel wire brushing; scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spotscomplete all as specified and as directed. |
| 79 | M&L for one coat ofacrylic distemper over one coat of wall putty on old surface of wallinclude brooming down or steel wire brushing; scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spotscomplete all as specified and as directed. |
| 80 | M&L for one coat ofwhite wash on ceiling of old surface with preparation of old surface shall include brooming down or steel wire brushing; scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spotscomplete all as specified and as directed. |
| 81 | S&F SSin repair wire basket (AISI 304 gde) non magnetic multilayer feuba nickel chrome plated for multipurpose utensils container with (storage basket) pull out type for utensils size 480mm x 500mm x 150mm of grade 304 with necessary fixing clips incl 24 inch long telescopic drawar channel etc, complete all as specified and as directed. |
| 82 | S&F SSin repair wire basket (AISI 304 gde) non magnetic multilayer feuba nickel chrome plated for multipurpose utensils container with (cup and saucers basket) pull out type for utensils size 380mm x 500mm x 100mm of grade 304 with necessary fixing clips incl 24 inch long telescopic drawar channel etc, complete all as specified and as directed. |
| 83 | S&F SSin repair wire basket (AISI 304 gde) non magnetic multilayer feuba nickel chrome plated for multipurpose utensils container with (plate basket) pull out type for utensils size 380mm x 500mm x 100mm of grade 304 with necessary fixing clips incl 24 inch long telescopic drawar channel etc, complete all as specified and as directed. |
| 84 | S&F in repairSS wire basket (AISI 304 gde) non magnetic multilayer feuba nickel chrome plated for multipurpose utensils container with (cutlery basket) pull out type for utensils size 380mm x 500mm x 100mm of grade 304 with necessary fixing clipsincl 24 inch long telescopic drawar channel etc,complete all as specified and as directed. |
| 85 | S&F SS in repair wire basket (AISI 304 gde) non magnetic multilayer feuba nickel chrome plated for multipurpose utensils container with (Grain trolley basket) pull out type for utensils size 380mm x 500mm x 100mm of grade 304 with necessary fixing clips incl 24 inch long telescopic drawar channel etc, complete all as specified and as directed. |
| 86 | S&F magnetic catcher as approved by GE, fixed with nut and bolt complete all as specifed and directed. |
