|
| 1 | Taking down chowkhats or frames n.exc 1.50 sqm with shutters (without taking off shutters from the frames) Complete all as specified and directed. |
| 2 | Taking down chowkhats of frames exc 1.50 sqm but n. exc 4.0 sqm with shutters (without taking off shutters from the frames) Complete all as specified and directed. |
| 3 | Taking down door shutters of any description exc 1 Sqm & n.exc 2 Sqm each complete all as specified and directed |
| 4 | Demolition of reinforced cement concrete (Reinforcement cut as required to facilatate demolition)of any description and in any position not otherwise specially provided Complete all as specified and directed. |
| 5 | Demolition of plain cement concrete (unreinforced) of any thickness of any description and in any position not specifically provided for complete all as specified and as directed. |
| 6 | Demolition of brick work built in cement mortar including all quions ,arcches, pillars etc complete all as specified and as directed. |
| 7 | M&L for virified ceramic coloured tiles 8 to 10 mm thick (square / recetangular ) polished, area of each tiles not exc 0.36 sqm, in floors etc,over 15mm thick screed bedin cement mortar 1:6 set and jointedin neat cement slurry and pointed in coloured cement.including dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), complete all as specified and directed. |
| 8 | All as per the description of srl item No 7 but in vertical surface as skirting, dado and risers to steps over and including10 mm thickrendering/backing coat in cement mortar 1:4 etc. |
| 9 | M&L for non skid ceramic coloured tiles 7 to 8 mm thick joint free area of each tile exceeding 0.09 sqmbut not exceeding 0.18 sqmas in floors over 15mm thick screed bedin cement mortar 1:6 set and jointedin neat cement slurry and pointed in coloured cement.including dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premisescomplete all as specified and directed. |
| 10 | All as per the description of srl item No 9 but in vertical surface as skirting, dado and risers to steps over and including10 mm thickrendering/backing coat in cement mortar 1:4 etc. |
| 11 | M&L glazed ceramic coloured tiles in vertical surface 350mm x 250mm x 7mm / 450mm x 350mmx 7mm thick, set and jointed in neat cement slurry and pointed in white or coloured cement to match incl backing coat 10mm thick in CM (1:4) and finished rough, complete including dismantling wall tiling including cement mortar bedding (but not backing),allas specified & directed.Note: - Tiling work to be done in patches including forming hole in tiles where required over making good wall surface. |
| 12 | M&L 20mm to 25 mm thick pre-polished machine cut Kota stone slab as in flooring over and including 15mm thick screed bed in cement mortar 1:6, laid over cement slurry @ 3 Kg/Sqm and jointed with grey cement slurry mixed with pigment to match with shade of slab including molding the edge of slabcomplete all as specified and as directed. |
| 13 | M&L 20mm to 25 mm thick pre-polished machine cut Kota stone slab as in riser or vertical surface over and including 10 mm thick rendering in cement mortar 1:4, and jointed with grey cement slurry mixed with pigment to match with shade of slab including molding the edge where as specified and as directed. |
| 14 | M&L for Machine cut makrana green/white marble18-20 mm thick in flooring as in border in any pattern over 15 mm cement screed bed in cement mortar 1:6 jointed and pointed with white cement slurry including mirror polishing/diamond polishing using carborandum stone of 0 unit including rubbing & treating the surface complete all as specified and directed |
| 15 | M&L reinforced cement concrete 1:2:4 type B-1 using 20 mm graded stone aggregate in Slabs supported on walls,beams and columns in floors,roofs, landings, balconies,canopies, deck slabs, chajjas and in shelves and the like complete (reinforcement to be measured separately). |
| 16 | Mild steel TMT bars 6 to 8 mm dia as reinforcement for concrete, cut to length, bent to shape required, including cranking, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm diacomplete all as specified and directed. |
| 17 | Formwork to sides and soffits of slabs n. exc. 200 mm thick and similar works rough finished surfaces of concrete complete. |
| 18 | Use and waste of formwork to chullah hoods, chajjas, throughs and similar items including edges. |
| 19 | M&L brickwork with subclass \"B\" Brick straight or curved on plan exc 6m mean radius, built in, built in cement mortar 1:6 complete including demolition of the the brick work at any positioncomplete all as specified and directed. |
| 20 | Taking down existing cementplaster or grit finishedor complete removal of existing pointing and finishes including racking out joints, hacking for key, scrubbing down with water etccomplete all asspecified and as directed. |
| 21 | M&L 15 mm thick rendering in cement mortar 1:4 on faces of brick work or concrete external surfaces of wall finished even and smooth without using extra cement all as specified and directed. |
| 22 | M&L 10mm thick rendering in cement mortar 1:6 on faces of brick work or concrete internal surfaces of wall finishedeven and smooth without using extra cement all as specified and directed. |
| 23 | M&L 5mm thick rendering in cement mortar 1:3 on concrete surfaces in ceiling, finished fair & even and smoothcomplete all as specified and directed. |
| 24 | M&L for preparation of new plastered surfaces of wall and applying two coat of cement based paint over a coat of cement primer all as sepcified and directed |
| 25 | M&L for Preparing new plastered surfaces of wall and applying two coats of oil bound distemper white or tinted over and including a coat of 2mm thk wall care putty on plastered surfaces preparatory to distemperingcomplete all as specified and directed. |
| 26 | M&L for Preparing new plastered or unplastered surfaces of ceiling and applying three coats of white washcomplete all as specified and directed. |
| 27 | M&L for complete removal of existing treatment and preparing old decorated surfaces of wall and applying two coats ofOil Bound Distemper over a coat of 1mm wall care puttycomplete all as specified and directed. |
| 28 | M&L for complete removal of existing treatment of wall including cornices etc. by washing, rubbing down and stopping holes, and applying two coats of cement base paint over one coat of primer of approved shade complete all as specified and directed. |
| 29 | M&L for Preparing old decorated plastered surfaces of ceiling and applyingone coats of white washcomplete all as specified and directed. |
| 30 | M&L for preparation of new or old plastered surfaces of wall and applying two or more coat of 100% Premium acrylic emulsion paint having VOC less than 50gm/litre and UV resistance as per IS 15489;2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/10 sm over and including priming coat of exterior primer applied @ 0.90 litre/10 Sqm over new surfacecomplete all as specified and directed. |
| 31 | S&F pressed steel frames of size 125mm x 60 mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc complete all as specified and directed. |
| 32 | S&F pressed steel frames of size 105mm x 60 mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc complete all as specified and directed. |
| 33 | S&F flush shutters 30mm to 35mm thick, solid core construction, with block board core and ply wood face panels, commercial type on both sides with leaping and beadingcomplete all as specified and directed. |
| 34 | S&F for 35mm thick 2nd class hard wood plain, framed pannelled shutters (two panel) with lock rail and panel of 9mm BWP commercial ply or 12mm veneered particle board wiyh commercial veneering on both faces. The size of rail and stile as per (IS : 1003 part-I, kiln seasoned and chemically pressure treated complete all as specified and as directed. |
| 35 | S&F for 35mm thick factory made, 2nd class hard wood glazed and skeleton shutters open rebeated and prepared to received glass, gauzed, with outsash bar edges of framing plain, chamfered or rounded, fitted with cut and mitered beads for securing glass etc, size of member of shutter as perspecified in SSR Part-I Section 8, clause 8.24 (a) and for door and fixed with chowkats, chemically pressure treated complete all as specified and as directed. |
| 36 | S&F stainless steel wire cloth, 0.56 mm nominal dia of wire and average width of aperture 1.18 mm, fixed with stainless steel wire staples beads, tinned tacksto steel windows and wooden doors shutters complete all as specified and directed. |
| 37 | S&F factory made solid PVC door frame of size 50 mm x 47 mm made out of 5 mm plain colour PVC sheet reinforced with MS square tube with wooden grain printed PVC sheet used inserted of plain colour PVC sheet & edges will be painted to match with printed sheet complete all as specified and directed. |
| 38 | S&F factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of MS tubes for top & bottom rails.MS frame shall be covered with heat moulded plain colourPVC ‘C’ channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail.Panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, complete all as specified and directed. |
| 39 | S&F factory made double rebated extruded WPC (Wood Polymer Composite) Solid door/window/Ceosetory windows & other frames/ chowkat of size 65mm x 125mm comprising of virgin PVC polymer of K value 50-60 (Suspension Grade), calcium carbonate and natural fibers( wood powder/ rice husk/ wheat husk) and non toxic additives ( max toxicityindex of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face & 1100 N Edge), min compressive strength of 58N/sqmm and resistance to flame of class A category with property of being termite/ borer proof, water/ moisture proof and fire retardant and fixed with MS Holdfast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engr incharge. Note:- For WPC solid door/windows frames, minus 5mm tolerance in dimension i.e depth and width of profile dimension on plus side shall be acceptable but no extra payment on this account shall be made |
| 40 | S&F Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter of size 30mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibres (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2 , modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of EngineerIn- Charge.Note:- stainless steel butt hinges and necessary S.S screws shall be paid separately complete all as specified and directed. |
| 41 | M &L for applying two coat of synthetic enamel paint on new wooden surfaces of any description over 10 cm width or girth complete all as specified and as directed. |
| 42 | S&F 100 mm long mild steel butt hinges, cold rolled, medium weight complete all as specified and directed. |
| 43 | S&F for 125mm long stainless steel tower bolt of extruded section complete all as specified and directed. |
| 44 | S&F 150mm long stainless steel handles, cast type complete all as specified and directed. |
| 45 | S&F 300mm long aluminium alloy, anodized sliding door bolt with hasp stapple ( bolt type) and fixing clips of sheet cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed. |
| 46 | S&F Stainless Steel Cromium Plated tubing of 25 mm dia curtain rod fancy type including fancy type CP brabs brackets (wall to wall or flush to wall) with finials or end caps decorative type as approved by GE for securing to curtain rod to wall in position, fixed in repair complete all as specified and directed. |
| 47 | S&F rotational moulded 500 lit capacity polythelenewater storage tanks (cylindrical verticle with closed top) hoisted and fixed in position complete all as specified and directed. |
| 48 | S&F rotational moulded 1000 lit capacity polythelene water storage tanks ( cylindrical verticle with closed top) hoisted and fixed in position complete all as specified and directed. |
| 49 | S&F steel water tubes, medium grade, ISI marked, galvanised, 15 mm bore with all fittings, fixed to walls and ceiling or laid in floors including taking up or down steel tubing and connections complete all as specified and directed. |
| 50 | S&F steel water tubes, medium grade, ISI marked, galvanised, 20 mm bore with all fittings, fixed to walls and ceiling or laid in floorsincluding taking up or down steel tubing and connections complete all as specified and directed. |
| 51 | S&L of 20mm outer dia of CPVC pipe SDR 11 and plain CPVC SDR 11 fittings on wall/ceiling or laying in floors complete including brass CPVC fittings (i.e elbow, Tee, MTA/MBTA,FTA/FBTA, Tank adaptor, Union, etc suitable for 15mm bore bath fittings). Note:- length of pipe with fittings to be measured for payment, no extra payment should be made for fittings. |
| 52 | S&L of 25mm outer dia of CPVC pipe SDR 11 and plain CPVC SDR 11 fittings on wall/ceiling or laying in floors complete including brass CPVC fittings (i.e elbow, Tee, MTA/MBTA,FTA/FBTA, Tank adaptor, Union, etc). Note:- length of pipe with fittings to be measured for payment, no extra payment should be made for fittings. |
| 53 | S&F in repair 20 mm Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for ironpipe and fixedcomplete all as specified and directed. |
| 54 | S&F in repair float valves, high pressure of PTMT with epoxy coated aluminium rod & high density plastic wall, screwed for iron pipe and fixed for 20 mm bore size (Minimum weight 210gms), complete all as specified and directed. |
| 55 | Cutting chases in brick walls, pinning in, making good any thickness up to wall tile to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, shelves, lintels, etc, and cutting chases for concealed water tubings or conduit wiring, etc and making good, cutting exceeding 20cm girth complete all as specified and directed. |
| 56 | S&F in repair Brass CP wall mixer for mixing hot & cold water screwed down high pressure, with all necessary fittings, screwed for pipe 15 mm bore with all fittings complete all as specified and directed. |
| 57 | S&FPVC (SWR) pipes single socketed in any lengthwith rubber ring joints fixed to walls or in floor 75mm bore including demolition/taking down PVC/ drain/Rain water pipe complete all as specified and directed. |
| 58 | S&FPVC (SWR) pipes single socketed in any lengthwith rubber ring joints fixed to walls 110 mm boreincluding demolition/taking down PVC/ drain/Rain water pipe complete all as specified and directed. |
| 59 | S&F PVC (SWR) bends any radius, 75 mm bore, complete all as specified and directed. |
| 60 | S&F PVC (SWR) bends in repair with access door any radius, 75 mm bore, complete all as specified and directed. |
| 61 | S&F PVC (SWR) bends any radius, 110 mm bore, complete all as specified and directed. |
| 62 | S&F PVC (SWR) bends with access door any radius, 110 mm bore, complete all as specified and directed. |
| 63 | S&F PVC (SWR) vent cowl, 75 mm bore complete all as specified and directed. |
| 64 | S&F in repair 600mm x 450mm bevelled edge mirror of selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers complete all as specified and directed. |
| 65 | S&F in repair 75 mmPVC (SWR) floor trap, plain with grating doom including jointing with solvent cement concrete 1:2:4 type B-1 using 20 mm graded stone aggregate mix with WPC complete all as specified and as directed. |
| 66 | S&F in repair Bib taps cast copper alloy chromium plated with crutch or butterfly handle, fancy type, screwed down, screwed for iron pipe or for brass ferrule 15 mm borecomplete all as specified and directed. |
| 67 | S&F in repair Stop valves, cast copper alloy, screwed down, high pressure, with crutch or butter fly handle, fancy type, chromium plated, with long shank and cup (concealed type) screwed both ends for iron pipe or for unions 15 mm bore complete all as specified and directed. |
| 68 | S&F in repair sheet glass ordinary quality, 3 mm thick and glazing with aluminium glazing clip, rubber gasket etc in aluminium window any type in squarecomplete all as specified and directed. |
| 69 | S&F in repair Stainless steel, wire cloth 0.56 mm nominal dia of wire, and average width of aperature 1.18mm and fixed to steel or wooden window or doors with necessary fixing arrangement complete all as specified. |
| 70 | Mild steel conforming to Fe 410-0 or Fe 310-0 in framed work such as grills, gratings, door frameetc with ends of bars shouldered and/or riveted or forged into spikes; framed guard bars; ladders; railings and similar work complete all as specified and directed. |
| 71 | M&L applying two coats of synthetic enamel paint on new steel surfaces of any description over 10cm width or girth over a coat of red oxide primer including preparation of steel surfaces complete all as specified and directed. |
| 72 | M&L for two coats of synthetic enamel paint on old steel painted surfaces including preparation of surfaces of any description not otherwise descriped over 10 cm width or grithcomplete all as specified and directed. |
| 73 | M&L for two coats of synthetic enamel paint on old wooden painted surfaces including preparation of surfaces of any description not otherwise descriped over 10 cm width or grithcomplete all as specified and directed. |
| 74 | Supply only liquid water proofing compound complete all as specified and directed. |
| 75 | M&L cement concrete type C-1, 1:3:6 (using 20mm graded aggregate) as in plinth protection and paving 75mm thick laid in slope finished even and fair without using extra cement incl making joints at every 2.5m and at corner filled with bitumen 85/25 and sand in ratio 1:2 by weight including necessary form work and complete all as specified. |
| 76 | M&L in repair for 60mm thick machine pressed precast concrete interlocking paver block (glossy finish) of M-35 Gde of approved shape, size and colourconferming to IS 15658-2006 and laid over and including 25mm thick sand cushion complete all as specified and as directed. |
| 77 | M&L in repair for 80mm thick machine pressed precast concrete interlocking paver block (glossy finish) of M-40 Gde of approved shape, size and colourconferming to IS 15658-2006 and laid over and including 25mm thick sand cushion complete all as specified and as directed. |
| 78 | S&F in repair for precast cement concrete type B-1 (1:2:4)(20mm graded stone aggregate ) as in kerb and edging to road and footh path, etc including chamfered,weathering, throating etc and setting in CM (1:4) complete all as specified and as directed. |
