|
| 1 | REPAIR TO TABLE 900 X 600 X 760 MM STEEL FRAME WITH DRAWER (FD-1008) |
| 2 | Taking out unserviceable top of table andS & F ofnew top of size 900mm x 600mm made out of 18mm thick HDHMR board, BSL exterior gradeISI marked, (Make-Century ply/Green ply/Action TESA) with 4 mm teak wood edging all roundthe top duly varnished, all as specified,shown on drawing and as directed by Engineer-in- Charge. |
| 3 | Taking outbroken/damage components i.e. legs,long rail, short rail & stiffner and S & F of new legs,long rail, short rail & stiffner made out of 25mm square MS pipe of 1.6mm thick, including cutting & welding etc, all as per shown on drg including applying two coats of red oxide primer to new portion, of approved make all as specified and directed by Engineer-in-Charge. |
| 4 | Removing of broken/damage drawer of table and S & F of new drawer made out of 1mm thick MS Sheet of existing shape and size including fixedbrass lock 50mm having4 lever with double key of make Harrison/Godrej and PVC recessed handle etc, all as per shown on drg.Drawer shall be applying two coats ofsynthetic enamel OG paint of approved make. |
| 5 | M & L for Welding works wherever required for repair to legs, rails & stiffner, drawer of table.Welding in repair not exceeding 2.5mm in length complete all as specified and as directedbyEngineer-in-Charge. |
| 6 | Removing of old unserviceable locks from table drawer and S & F new brass locks 50mm, heavy duty having4 lever with doublekeys Make-Harrison /Godrej fixing with suitable nuts,All as shown in drg and as directed by Engineer-in-Charge. |
| 7 | Taking out brokenPVC shoes from table legs andS & F new PVC shoes 25mm square made out of hard rubberbest quality as approved by GE and fixed with steel screw. All as specified and directed byEngineer-in-Charge. |
| 8 | M & L for preparation of old painted surface by rectification, scratching and painting of two coats of synthetic enamel OGpaint to old & new portion of approved make all as specified and directed by Engineer-in-Charge. |
| 9 | REPAIR TO TABLE 900 X 600 X 760 MM STEEL FRAME WITHOUT DRAWER (FD-1007) |
| 10 | Taking out unserviceable top of table andS & Fof New top of size 900mm x 600mm made out of 18mm thick HDHMR BSL board, exterior gradeISI marked (Make-Century ply/Green ply/Action TESA) with 4 mm teak wood beading all round the top duly varnished, all as specified, shown on drawing and as directed by Engineer-in- Charge. |
| 11 | M & L for Welding works wherever required for repair to legs, rails & stiffner of table.Welding in repair not exceeding 2.5mm in length complete all as specified and as directedbyEngineer-in-Charge. |
| 12 | Taking out brokenPVC shoes from table legs andS & F new PVC shoes 25mm square made out of hard rubberbest quality as approved by GE and fixed with steel screw. All as specified and directed byEngineer-in-Charge. |
| 13 | M & L for preparation of painted surface by rectification, scratching and painting of two coats of synthetic enamel OGpaint to old/new portion of approved make all as specified and directed by Engineer-in-Charge. |
| 14 | REPAIR TO TABLE OFFICE CLERK STEEL (FD-84 (M), FD-381, FD-1004, FD-1006) |
| 15 | Taking out unserviceabletop from Table andS & F of New top of size 1220mm x 630mmmade out of 18mm thick HDHMR BSL board, exterior gradeISI marked, (Make-Century ply/Green ply/Action TESA) with 4 mm teak wood beading all round the top duly varnished, all as specified,shown on drawing and as directed by Engineer-in- Charge. |
| 16 | Removing of broken/damage drawer of table and S & F of new drawer made out of 1mm thick MS Sheet of existing shape and size including fixedbrass lock 50mm having4 lever with double key of make Harrison/Godrej and PVC recessed handle etc, all as per shown on drg.Drawer shall be applying two coats ofsynthetic enamel OG paint of approved make. |
| 17 | Removing of broken/damage components i.e. legs, top front rail, side rail,stiffener and S & F of new leg, top front rail, side rail and stiffener made out of 25mm square MS pipe of1.6mm thick, including cutting & welding etc, all as per shown on drg including applying two coats ofred oxide primerto new portionof approved make all as specified and directed by Engineer-in-Charge. |
| 18 | Removing of old unserviceable locks from table drawer and S & F new brass locks 50mm, heavy duty having4 lever with doublekeys Make-Harrison /Godrej fixing with suitable nuts,All as shown in drg and as directed by Engineer-in-Charge. |
| 19 | M & L for Welding works wherever required for repair to legs, rails & stiffner, drawer of table.Welding in repair not exceeding 2.5mm in length complete all as specified and as directedbyEngineer-in-Charge. |
| 20 | Taking out brokenPVC shoes from table legs andS & F new PVC shoes 25mm square made out of hard rubberbest quality as approved by GE and fixed with steel screw. All as specified and directed byEngineer-in-Charge. |
| 21 | M & L for preparation of the existing, decorated surfaces of the table by removing of all dents and spray painting of approved synthetic enamelpaint OG to old & new portion of approved make all as specified and directed by Engineer-in-Charge. |
| 22 | REPAIR TO OFFICE OFFICER STEEL (FD-84 (M) FD-1003) |
| 23 | Taking out of unserviceable top from Table and S & Fof new top of size 1680mm x 870mmmade out of 18mm thick HDHMR BSL board, exterior gradeISI marked, (Make-Century ply/Green ply/Action TESA) with 4 mm teak wood beading all round the topduly varnished, all as specified, shown on drawing and as directed by Engineer-in- Charge. |
| 24 | Removing of broken/damage drawer of table and S & F of new drawer made out of 1mm thick MS Sheet of existing shape and size including fixedbrass lock 50mm having4 lever with double key of make Harrison/Godrej and PVC recessed handle etc, all as per shown on drg.Drawer shall be applying two coats ofsynthetic enamel OG paint of approved make. |
| 25 | Taking out broken/damage components i.e. legs, top front rail, top side rail and stiffener and S & F of new leg, top front rail, top side rail and stiffener made out of 25mm square MS pipe of1.6mm thick, including cutting & welding etc, all as per shown on drg including applying two coats ofred oxide primer to new portion of approved make all as specified and directed by Engineer-in-Charge. |
| 26 | Removing of old unserviceable locks from table drawer and S & F new brass locks 50mm, heavy duty having4 lever with doublekeys Make-Harrison /Godrej fixing with suitable nuts,All as shown in drg and as directed by Engineer-in-Charge. |
| 27 | M & L for Welding works wherever required for repair to legs rails & stiffner, drawer of table.Welding in repair not exceeding 2.5mm in length complete all as specified & as directedby Engineer-in-Charge. |
| 28 | Taking out broken PVC shoes from table legs andS & F new PVC shoes 25mm square made out of hard rubberbest quality as approved by GE and fixed with steel screw. All as specified and directed byEngineer-in-Charge. |
| 29 | M & L for preparation of the existing, decorated surfaces of the table by removing of all dents and spray painting of approved synthetic enamelpaint OG to old & new portion of approved make all as specified and directed by Engineer-in-Charge. |
| 30 | REPAIR TO TABLE DINNING ORS (FD-165) |
| 31 | Taking out unserviceable top from Table dining and S & F of new top of size 1900mm x 685mm madeout of 19mm thick block board of(Make- Centuryply/kitply/Archidply/ DURO) duly covered with 22 guage aluminium sheet with 2\" over lapping with stainless steel screw. All as specified, shown on drawing and as directed by Engineer-in-Charge. |
| 32 | Removing of broken/damage components i.e. legs, top long rail, short rail, stiffener of Table diningandS & F of new legs, top long rail, short rail, stiffener complete made out of 25mm square MS pipe of1.6mm thick, including cutting & welding etc, all as per shown on drg including applying two coats ofred oxide primer to new portion of approved make all as specified and directed by Engineer-in-Charge. |
| 33 | M & L for Welding works wherever required for repair to legs rails & stiffner of table.Welding in repair not exceeding 2.5mm in length complete all as specified and as directedbyEngineer-in-Charge. |
| 34 | Taking out brokenPVC shoes from table legs andS & F new PVC shoes 25mm square made out of hard rubberbest quality as approved by GE and fixed with steel Screw. All as specified and directed byEngineer-in-Charge. |
| 35 | M & L for preparation of the existing, decorated surfaces of the table by removing of all dents and spray painting of synthetic enamelpaint black to old & new portion of approved make all as specified and directed by Engineer-in-Charge. |
| 36 | REPAIR TO ALMIRAH LARGE STEEL(FD-67, FD-243, FD-1031, FD/E6/MAP/18) |
| 37 | Removing of unserviceable locks from the locking assy by loosening of screws and S & F new MS CP locks 75mm heavy duty having 6 lever with doublekeys Make-Harrison/ Godrej, fixing with suitable nutsincluding repair of locking device complete all as specified and as directed by Engineer-in-charge. |
| 38 | Removing of unserviceable door handles from Almirah large and S & F of new door handle of mild steel chromium plated 100mmof approved make complete with nuts & pins all as specified and as directed by Engineer-in-charge. |
| 39 | Removing of broken/damaged shelve from Almirah and S & F of new shelves made out ofMS sheet 1 mm thick of exisiting shape & size 900mm x 400mm x 25mm of existing shape & size with suitable clamps, including cutting & welding etc, all as per shown on drg including applying two coats ofred oxide primer to new portion of approved make all as specified & directed by Engineer-in-Charge. |
| 40 | Removing of broken/damaged legs from bottom portion of Almirah large steel and S&F ofnew leg made out of MS Sheet 1mm thick of size 485mm x 70mm x 100mm, including cutting & welding etc, all as per shown on drg including applying two coats ofred oxide primer to new portionof approved make all as specified and directed by Engineer-in-Charge. |
| 41 | Removing of unserviceable hinges from shutter and S & F of new hingesof mild steel of size 75mmbest quality asapproved by GE, all as specified and directed byEngineer-in-Charge. |
| 42 | Removing of unserviceable locking device from Almirah Large steel and S & F of newGI locking device 3 waybest quality as approved by GE including applying two coats ofred oxide primer to new portionof approved make all as specified & directed by Engineer-in-Charge. |
| 43 | M & L for Welding works wherever required for repair to Doors, Shelve & Legs of Almirah.Welding in repair not exceeding 2.5mm in length complete all as specified & as directedbyEngineer-in- Charge. |
| 44 | Removing of unserviceable 20mm dia choromium plated conduit pipe and S&F new conduit choromium plated for hangers size & Shape as shown on Drg |
| 45 | M & L for preparation of the existing, decorated surfaces of the almirah large steel with shelves by removing of all dentsand spray painting of approved synthetic enamelpaint OG to Internal & External complete of approved make all as specified and directed by Engineer-in-Charge. |
| 46 | REPAIR TO ALMIRAH MEDIUM STEEL WITH SHELVES(FD-67 (M), FD-1032) |
| 47 | Removing of unserviceable locks from the locking assy by loosening of screws and S & F new MS CP locks 75mm heavy duty having 6 lever with double keys Make-Harrison/Godrej,fixing with suitable nuts including repair of locking device complete all as specified & as directed by Engr-in-charge. |
| 48 | Removing of unserviceable door handles from Almirah Med steel and S&F of new door handle of mild steel chromium plated 100mmof approved make complete with nuts & pins all as specified and as directed by Engineer-in-Charge. |
| 49 | Removing of broken/damaged shelves of Almirah Med steel and S & F of new shelves made out of MSsheet 1mm thick with existing shape & size 760mm x 365mm x 25mm with suitable clamps, including cutting & welding etc, all as per shown on drg including applying two coats ofred oxide primer to new portion of approved make all as specified and directed by Engineer-in-Charge. |
| 50 | Removing of broken/damaged legs from bottom portion of Almirah Medium steel and S & F ofnew leg made out of MS Sheet 1mm thick of size 440mm x70mm x 100mm,including cutting & welding etc, all as per shown on drg including applying two coats ofred oxide primer to new portion of approved make all as specified and directed by Engineer-in-Charge. |
| 51 | Removing of unserviceable hinges from shutter and S & F of new hingesof mild steel of size 75mmbest quality as approved by GE, all as specified and directed byEngineer-in-Charge. |
| 52 | Removing of unserviceable locking device from Almirah Med steel and S & F of newGI locking device 3 waybest quality as approved by GE including applying two coats ofred oxide primer to new portionof approved make all as specified & directed by Engineer-in-Charge. |
| 53 | M & L for Welding works wherever required for repair to Doors, Shelve & Legs of Almirah.Welding in repair not exceeding 2.5mm in length complete all as specified & as directedbyEngineer-in- Charge. |
| 54 | M & L for preparation of the existing, decorated surfaces of the Almirah Med steel with shelves by removing of all dentsand spray painting of approved synthetic enamelpaint OG to Internal and External complete all as specified and as directed by Engineer-in-charge. |
| 55 | REPAIR TO CHAIR CB STEEL WITH ARM (FD-75(M) |
| 56 | Removing of broken/damaged seats from chair CB Steel with arms and S & F new seats made of 2nd class hard wood of size 450mm x 410mmx 35mm duly canned with cane plastic half round 2 to 2.5mm and 3mm wide at border as per Godrej pattern as approved by GE. Wooden portion of seat shall be painted with two coat of synthetic enamel paint black and fixed with 04 Nos new steel screw of size 75mm long all as specified & as directed by Engineer-in-charge. |
| 57 | Removing of broken/damaged back from chair CB Steel with arms and S & Fnew back made of 2nd class hard woodof size 450mm x 350mm x 35mm duly canned with cane plastic half round 2 to 2.5mm and 3mm wide at border as per Godrej pattern as approved by GE. Wooden portion of seat shall be painted with two coat of synthetic enamel paint blackand fixed with 04 Nos new steel screw of size 75mm long all as specified & as directed by Engineer-in-charge. |
| 58 | Taking out broken/damagedhand rest (Arms) from chair CB steel and S & F new hand rest (Arms) made of 2nd class hard wood of size 50mm x 25mm x 410mm longof existing shape & size duly powder coating painted of black colour and fixed with new screws complete all as shown in drawing and as directed. |
| 59 | S & F of 02 NosMS rod 10mm x 410mm long for extra support for seat of chair CB Steel,including cutting & welding etc and applying two coats ofred oxide primer to new portion all as specified and directed by Engr-in-Charge. |
| 60 | S & Fof MS flat iron strips of size 25mm x 75mm x 3mm be welded beneath for seat & back for extra support for chair CB Steel with two coats of synthetic enamel paint OG including welding and preparation of surface as per drg. |
| 61 | M & L for Welding works wherever required for repair to chairs.Welding in repair not exceeding 2.5mm in length complete all as specified and as directedbyEngineer-in- Charge. |
| 62 | Taking out broken/damaged PVC Cap from chair CB steel with arms and S & F new PVC cap black colour on top side of chair as approved by GE, all as shown in drawing and as directed. |
| 63 | M & L for preparation of old painted surface by rectification, scratching and painting of two coats of synthetic enamel OGpaint to frame of chair portion of approved make of all as specified and directed by Engineer-in-Charge. |
| 64 | Repair to Chair CB Steel without arm (FD-75) |
| 65 | Removing of broken/damaged seats from chair CB Steel without arms and S & F new seats made of 2nd class hard woodof size 425mm x 375mm x 35mm duly canned with cane plastic half round 2 to 2.5mm and 3mm wide at border as per Godrej pattern as approved by GE. Wooden portion of seat shall be painted with two coat of synthetic enamel paint black and fixed with 04 Nos new steel screw of size 75mm long all as specified & as directed by Engineer-in-charge. |
| 66 | Removing of broken/damaged back from chair CB Steel without arms and S & F new seats made of 2nd class hard woodof size 375mm x 350mm x 35mmduly canned with cane plastic half round 2 to 2.5mm and 3mm wide at border as per Godrej pattern as approved by GE. Wooden portion of seat shall be painted with two coat of synthetic enamel paint black and fixed with 04 Nos new steel screw of size 75mm long all as specified & as directed by Engineer-in-charge. |
| 67 | Supply & Fixing of MS flat iron strips of size 25mm x 75mm x 3mm be welded beneath for seat & back for extra support for chair CB Steel with two coats of synthetic enamel paint OG including welding and preparation of surface as per drg. |
| 68 | Supply & Fixing of02 Nos MS rod 10mm x 410mm long for extra support for seat of chair CB Steel,including cutting & welding etc and applying two coats ofred oxide primer to new portion all as specified and directed by Engineer-in-Charge. |
| 69 | M & L for Welding works wherever required for repair to chairs.Welding in repair not exceeding 2.5mm in length complete all as specified and as directedbyEngineer-in- Charge. |
| 70 | Taking out broken/damaged PVC Cap from chair CB steel without arms and S & F new PVC cap black colour on top side of chair as approved by GE, all as shown in drawing and as directed. |
| 71 | M & L for preparation of old painted surface by rectification, scratching and painting of two coats of synthetic enamel OGpaint to frame of chair portion of approved make ofall as specified and directed by Engineer-in-Charge. |
| 72 | REPAIR TO LOCKER BED SIDE STEEL (FD - 1029) |
| 73 | Removing of unserviceable door handles and S & F new Mild steel chromium plated handles 100mm of approved make complete with nuts & pins all as specified and as directed by Engineer-in-Charge. |
| 74 | Removing of unserviceable Hasp & Staple and S & F of new Hasp & Stapleof size 100 mmsafty type mild steel chromium plated of approved make complete with nuts & pins all as specified and as directed by Engineer-in-Charge. |
| 75 | Removing of unserviceable hinges from door and S & Fof new hingesof mild steel of size 75mmbest quality as approved by GE, all as specified and directed byEngineer-in- Charge. |
| 76 | Removing ofbroken/damaged legs from bottom portion of locker steel and S & F ofnew leg made out of MS Sheet 1mm thick of size575mm x 150mm x 100mm, including cutting & welding etc, all as per shown on drg including applying two coats ofred oxide primer to new portion of approved make all as specified and directed by Engineer-in-Charge. |
| 77 | M & L for Welding works wherever required for repair to Doors, Shelve & Legs of Locker.Welding in repair not exceeding 2.5mm in length complete all as specified & as directedbyEngineer-in- Charge. |
| 78 | Removing ofbroken/damaged conduit pipe from locker and S & F ofnew CP steel conduit pipe of 1.6mm thick x 20mm x 380mm long with socketfor hanging of cloth, all as per shown on drg and directed by Engineer-in-Charge. |
| 79 | M & L for preparation of the existing, decorated surfaces of the locker steel with shelves by removing of all dents and filling with putty and spray painting of approved synthetic enamelpaint ofInternal and External complete of approved make all as specified and directed by Engineer-in-Charge. |
| 80 | CONVERSION OF CHARPOY GI PIPE NYLON NEWAR (FD-1122/FD-220) TO CHARPOY GI PIPE WITH PLYWOOD TOP COMPRISING OF THE FOLLOWING |
| 81 | (a)Taking out existing unserviceble Nylon Newar from the Charpoy GI pipe & tightening of frame.(b) Fixingof 03 Nos MS flat iron stiffner of size 900mm x 40mm x 6mm thick, each welded with fillet weld all around 3mm thick to long rails of each GI pipe charpoy at equally spaced (Parallel to short rail)to support plywood andtwo coats of synthetic enamel paint black over one coat of red oxide zinc chrome primer on stiffner, of approved make all as specified and directed by Engineer-in-Charge.(c)Fixing ofPlywood BWP grade AA type as per IS-710 ofMake-Century Ply/Green Ply/ Archid Ply/DURO of size 1980mm x 900mm x 12mm thick in one piece with 16 Nos of semi circular top bolt of 6mm dia 75 mm long and nut with galvanised steel washers to be used for fixing of plywood top including drilling holes.All the corners of plywood shall be rounded same as per shape of corner elbows of charpoy. The bolts for fixing of plywood shall be counter sunk type and top of bolt (head) shall be flushed with ply top & finished with suitable filling.All as specified and directed by Engineer-in-Charge. |
| 82 | REPAIR OF CHARPOY GI PIPE NYLON NEWAR AND CHARPOY GI PIPE PLY TOP (FD-220/FD-1122/FD-220R) |
| 83 | Removing of old broken stiffner of MS square tube 25mm x25mm x 900mm from GI Charpoy ply top and S & F of 03 Nos MS flat iron stiffner of size 900mm x 40mm x 6mm thick, each welded with fillet weld all around 3mm thick to long rails of each GI pipe charpoy at equally spaced (Parallel to short rail)to support plywood andtwo coats of synthetic enamel paint black over one coat of red oxide zinc chrome primer on stiffner, of approved make all as specified and directed by Engineer-in-Charge. |
| 84 | Removing of unserviceable plywood 12mm thick from charpoy GI pipe ply top and S & F of newPlywood BWP grade AA type as per IS-710 ofMake-Century Ply/Green Ply/ Archid Ply/DURO of size 1980mm x 900mm x 12mm thick in one piece with 10 Nos of semi circular top bolt of 6mm dia 75 mm long and nut with galvanised steel washers to be used for fixing of plywood top including drilling holes.All the corners of plywood shall be rounded same as per shape of corner elbows of charpoy. The bolts for fixing of plywood shall be counter sunk type and top of bolt (head) shall be flushed with ply top & finished with suitable filling.All as specified and directed by Engineer-in-Charge. |
| 85 | Removing of broken/UNSV Elbow 3 way from charpoy GI pipe and S & F of new GI Elbow 3 way of 32 mm medium grade ISI marked complete all as specified & directed by Engr-in-charge. |
| 86 | Removing of broken/UNSV hexagonal check nut from Charpoy GI pipe and S & F of new GI hexagonal check Nut 32 mm bore, 6 mm thick complete all as specified and directed by Engr-in-charge. |
| 87 | Removing of broken/UNSV long rail of charpoy GI pipe and S & F of new long rails ofGI pipe32 mm x 1880mm“Medium grade” (ISI Marked) threaded both ends as per drg, all as specified & directed by Engr-in-Charge. Make-TATA/JINDAL/ SURYA PRAKASH. |
| 88 | Cutting & fixing of 02 Nos GI short rail 840mm made out of unserviceable longrailretrived from Srl item No 12.05 above including threading both ends and fixinginto existing charpoy frame as per drg & taking out unsv short rail, complete all as specified and shown on drawings,all as directed by Engr-in-charge. |
| 89 | Cutting & fixing ofGIleg 440mm made out of unserviceable short railretrived from Srl item No 12.05 aboveincluding threading both ends and fixinginto existing charpoy frame as per drg and taking out unsv legs, complete all as specified and shown on drawings, all as directed by Engr-in-charge. |
| 90 | Removing of broken/UNSV legs of charpoy GI pipe and S & F of new legs ofGI pipe 32 mm x 440mm “Medium grade” (ISI Marked) threaded both ends as per drg, all as specified & directed by Engr-in-Charge. Make-TATA/ JINDAL/ RAVINDRA. |
| 91 | Removing of broken/UNSV GI shoesocket 32 mm and S & F of GI shoesocket 32 mm “Medium grade” (ISI Marked) threaded ends to legs of Charpoy GI Pipe as per drg , all as specified & directed by Engr-in-Charge. Make-TATA/ JINDAL/ SURYA PRAKASH. |
| 92 | REPAIR OF CHARPOY TUBULAR FRAME WITH COMMERCIAL PLY WITHOUT FMN SET (FD-CEPZ/SK-06/08-09)- JCO |
| 93 | Taking down and removing of old unserviceable plywoodfrom charpoy.Supply and fixing at top new plywood BWR 12 mm thick ISI markedof quality approved by GE. Rest all as specified in drg. and directed by Engr-in–Charge. |
| 94 | All as per srl item No.13.01 above but taking out unservicable long rail. Supply and fixing of NewLong rail of 25x65 mm MS rectangular pipe (18 gauge) medium gradein place of unservicable long railall as specified duly arc welded as directed by Engr-in–Charge. |
| 95 | All as per srl item No. 13.01 above but taking out unservicable short rail. Supply and fixing of Newshort rail of 25x65 mm MS rectangular pipe (18 gauge) medium gradein place of unservicable short railall as specified duly arc welded as directed by Engr-in–Charge. |
| 96 | All as per srl item No.13.01 above but taking out unservicablestiffner. Supply and fixing of Newstiffners 25x25 mm MS rectangular square pipe (18 gauge) medium gradein place of unservicable stiffnersall as specified duly arc welded as directed by Engr-in–Charge. |
| 97 | All as per srl item No. 13.01 above but supply and fixing of prelaminated particle board of teak shade on both sides exterior grade of suitable size edges fixed using synthetic adhesive and headless pin with teak wood beading of size 4x18 mm french polished duly screwed in the head board as per drawingin place of unservicableprelaminated particle board in the head boardall as specified duly arc welded as directed by Engr-in–Charge. |
| 98 | M & L for preparation of old painted surface by rectification, scratching and painting of two coats of synthetic enamel Black paint to old & new portion of approved make all as specified & directed by Engr-in-Charge. |
| 99 | REPAIR OF CHARPOY MS TUBULAR FRAME WITH COMMERCIAL PLY WITHOUT FMN SET (FD-CEPZ/SK-07/08)/MAP-II/01 |
| 100 | Taking down and removing of old unserviceable plywoodfrom charpoy.Supply and fixing at top new plywood BWR 12 mm thick ISI markedof quality approved by GE. Rest all as specified in drg. and directed by Engr-in–Charge. |
| 101 | All as per srl item No. 14.01 above but taking out unservicable long rail. Supply and fixing of NewLong rail of 25x65 mm MS rectangular pipe (18 gauge) medium gradein place of unservicable long railall as specified duly arc welded as directed by Engr-in–Charge. |
| 102 | All as per srl item No. 14.01 above but taking out unservicable short rail. Supply and fixing of Newshort rail of 25x65 mm MS rectangular pipe (18 gauge) medium gradein place of unservicable short railall as specified duly arc welded as directed by Engr-in–Charge. |
| 103 | All as per srl item No. 14.01 above but taking out unservicablestiffner. Supply and fixing of Newstiffners 25x25 mm MS rectangular square pipe (18 gauge) medium gradein place of unservicable stiffnersall as specified duly arc welded as directed by Engr-in–Charge. |
| 104 | M & L for preparation of old painted surface by rectification, scratching and painting of two coats of synthetic enamel Blackpaint to old & new portion of approved make all as specified and directed by Engineer-in-Charge. |
| 105 | REPAIR TO TABLE BED SIDE MAP (FD/E-06/MAP/15R) |
| 106 | Taking out the unserviceable table top. Supply & fixing new top of suitable size, made of 18 mm thick HDHMR Board BSL exterior grade, Teakwood beading of 4 mm x 18 mm size fixed all as specified in drg and directed by E-in-Charge. |
| 107 | All as per srl item No 15.01 buthandles of drawer asper drg(Make-as per sample held with office) |
| 108 | All as per srl item No 15.01 butsides with 18 mm thick HDHMR Board exterior grade |
| 109 | All as per srl item No 15.01 butdrawers complete and polished side as per drg |
| 110 | All as per srl item No 15.01 but PVC rubber shoes to 18mm square pipe |
| 111 | All as per srl item No 15.01 but painting to frame one coat synthetic enamel with brush paint |
| 112 | All as per srl item No 15.01 but replacement of ms tubular square pipe 18mm of legs with old rusted /broken legs of same size |
| 113 | REPAIR TO BED HARD MAP STEEL (FD/E6/MAP/08 (R) |
| 114 | Taking down and removing of old unserviceable plywoodfrom bed hard steel pipe.Supply and fixing at top new plywood BWR 12 mm thick ISI markedof quality approved by GE. Rest all as specified in drg. and directed by Engr-in–Charge. |
| 115 | All as per srl item No. 16.01 above but taking out unservicable long rail. Supply and fixing of NewLong rail of 25x65 mm MS rectangular pipe (18 gauge) medium gradein place of unservicable long railall as specified duly arc welded as directed by Engr-in–Charge. |
| 116 | All as per srl item No. 16.01 above but taking out unservicable short rail. Supply and fixing of Newshort rail of 25x65 mm MS rectangular pipe (18 gauge) medium gradein place of unservicable short railall as specified duly arc welded as directed by Engr-in–Charge. |
| 117 | All as per srl item No 16.01 above but taking out unservicable stiffner 18X38mm underneath the head board. Supply and fixing of Newstiffner of same size 18x38mm (18 gauge) in place of unservicableduly arc welded as directed by Engr-in–Charge. |
| 118 | All as per srl item No 16.01 above but taking out unservicablestiffner. Supply and fixing of Newstiffners 25x25 mm MS rectangular square pipe (18 gauge) medium gradein place of unservicable stiffnersall as specified duly arc welded as directed by Engr-in–Charge. |
| 119 | All as per srl item No 16.01 above but taking out unservicableleg. Supply and fixing of New legs of 38x38 mm of length 500mm of foot board of MS square pipemedium grade in place of unservicable legsall as specified duly arc welded as directed by Engr-in–Charge. |
| 120 | All as per srl item No 16.01 above buttaking out unservicableleg. Supply and fixing of New legs of 38x38 mm of length 800mm of Head board of MS square pipemedium grade in place of unservicable legsall as specified duly arc welded as directed by Engr-in–Charge. |
| 121 | All as per srl item No 16.01 above but taking out unservicablestiffner. Supply and fixing of Newstiffners 25x25 mm MS rectangular square pipe (18 gauge) in place of unservicable stiffners in foot boardall as specified duly arc welded as directed by Engr-in–Charge. |
| 122 | All as per srl item No. 16.01 above but taking out unservicablestiffner. Supply and fixing of Newstiffners 25x25 mm MS rectangular square pipe (18 gauge) in place of unservicable stiffners in head boardall as specified duly arc welded as directed by Engr-in–Charge. |
| 123 | All as per srl item No 16.01 above but supply and fixing of HDHMR BSL exterior grade of suitable size edges fixed using synthetic adhesive and headless pin with teak wood beading of size 4x18 mm french polished duly screwed in the head board as per drawingin place of unservicableprelaminated particle board in the head boardall as specified duly arc welded as directed by Engr-in–Charge. |
| 124 | All as per srl item No. 16.01 above but supply and fixing of HDHMR BSLboard exterior grade of suitable size edges fixed using synthetic adhesive and headless pin with teak wood beading of size 4x18 mm french polished duly screwed in the foot board as per drawingin place of unservicableprelaminated particle board in the foot boardall as specified duly arc welded as directed by Engr-in–Charge. |
| 125 | All as per srl item No 16.01 above but welding of MS strip 20x45 mm MS strip in the head board/ foot boardin all respectas specified duly arc welded as directed by Engr-in–Charge. |
| 126 | All as per srl item No 16.01 above buttaking out unservicableshoe.Supply and fixing of PVC/ hard rubber shoes of minimium thickness 5 mm suitable for legs of size 38x38 mm square tube as approved by GE/Engr-in-Charge in replacement of unserviceable shoes. |
| 127 | M & L for preparation of old painted surface by rectification, scratching and painting of two coats of synthetic enamel Blackpaint to old & new portion of approved make all as specified and directed by Engineer-in-Charge. |
| 128 | REPAIR TO RACK SHOES STEEL (FD/E6/MAP/02 (R) |
| 129 | Remove old unserviceablepipe from shoes rack and supply & fix new 25 mmdia 18 gauge MS pipe of existing length as per drg |
| 130 | Remove old unserviceablepipe from shoes rack and supply & fix new 19 mm dia 18 gauge MS pipe of existing length as per drg |
| 131 | Remove old unserviceablepipe from shoes rack and supply & fix new 20 mm dia 18 gauge MS pipe of existing length as per drg |
| 132 | Re-alignment and Welding (in smooth finish) of broken parts/joints of the frame of Rack shoes to its original shape. Supply and fixing 20x3 mm thick iron strip, if required as per drawing in accordance with standard workmanship/directed and specified byGE/Engr-in Charge. |
| 133 | M & L for preparation of old painted surface by rectification, scratching and painting of two coats of synthetic enamel Blackpaint to old & new portion of approved make all as specified and directed by Engineer-in-Charge. |
| 134 | REPAIR TO CHAIR SCHOOL WITH HAND REST (FD/E6/MAP/05) |
| 135 | Taking out unservicable one piece PVC seat and back of minium weight 1.40 KG. Supply and fixing one piece PVC seat and back as existingas directed by Engr-in–Charge. |
| 136 | All as per srl item No 18.01 above but taking out unservicable hand board. Supply and fixing of hand board made of 18 thick HDHMR BSL board with edges fixed with plastic laminated beading of 3mm thickness with synthetic adhesive and headless pins of suitable size to be screwed with 25 mm dia hollow steel pipe hinged on the arm as directed by Engr-in–Charge. |
| 137 | All as per srl item No 18.01 above butremoving the existing unserviceable shoe. Supply & fixingPVC Shoe of suitable size and 3 mm thickness to 25mm dia MS Pipe of 18 guage of legs. Rest all as per drawing. |
| 138 | All as per srl item No 18.01 above but welding in smooth finish of damaged/loose joints of any part. Scrubing and painting joint and mainframe with one coat in glossy finish ofsynthetic enamel paint black colour superior quality over a coat of red oxide primer with spray machine as specified and directed by Engr-in–Charge. |
| 139 | REPAIR TO CHAIR VARANDAH(FD-256, FD-259) |
| 140 | Taking out old broken/damaged Conduit pipe from front/rear leg, seat and back rail and stiffener and S & F new front/rear leg,seat/back rail and stiffener made out of 20 mm dia conduit pipe of 16 Gauge including cutting & welding etc, all as per shown on drg including applying two coats ofred oxide primer to new portion of approved make all as specified and directed by Engineer-in-Charge. |
| 141 | Taking out broken/damaged 10 mm MS rod and S & F with new MS rod 10mm x 460mm long including cutting & welding etc, all as per shown on drg including applying two coats ofred oxide primer to new portion of approved make all as specified and directed by Engineer-in-Charge. |
| 142 | M & L for Welding works wherever required for repair to chairs.Welding in repair not exceeding 2.5mm in length complete all as specified and as directedbyEngineer-in- Charge. |
| 143 | Removing old worn out cane plastic of chair verandha preparing surfaces by applying and papering and painting the same with two coats of white synthetic enamel paint, of approved make all as specified and directed by Engineer-in-Charge. |
| 144 | Re-canning of chair verandha seat and back with cane plastic 4mm wide half round white colour canned prepared under ser No 19.00 above as per Godrej pattern complete all as specified and as directed by Engineer-in-charge. |
| 145 | Taking out broken/damaged PVC shoes of chair verandah legs and S&F new PVC shoes made out of hard rubber supirior quality as approved by GE and fixed with steel Screw. All as specified and directed byEngineer-in-Charge. |
| 146 | CHAIR REVOLVING EXECTIVE STEEL(HIGH/LONG/MEDIUM) BACK (FD-TP) |
| 147 | Taking out old/unserviciable seat & back and supply & fixed new seat & back made of 12mm thick ply, 70mm thick cushion covered with the fabric 32 density with brown/black as boss chair. Restall round complete all as shown on drawing. |
| 148 | All as per BOQ srl item No 20.01 above but taking out unserviciable handrest and S & F new hand rest complete as per above Drg at Ser No. 20.00 and directed by Engr - In - Charge. |
| 149 | All as per srl item No 20.01 above but taking out unserviciable hydraulic jack and S & F new hydraulic jack with base plate complete as per above Drg at Ser No. 20.00 and directed by Engr - In - Charge. |
| 150 | All as per srl item No BOQ 20.01 above but taking out unserviciable costers and S & F new costers complete as per above Drg at Ser No. 20.00 and directed by Engr - In - Charge. |
| 151 | Taking out old broken/unserviciable spider base of stainless steel& supply & fixing new stainless steelas shown on drg and approved by GE |
| 152 | REPAIR TO CHAIR COMPUTER MAP (FD/E6/Map-01) |
| 153 | Taking out old/unserviciable seat & back and supply & fixed new seat & back made of 12mm thick ply, 70mm thick cushion covered with the fabric 32 density with brown/black as boss chair. Restall round complete all as shown on drawing. |
| 154 | All as per srl item No 21.01 above but taking out unserviciable handrest and S & F new hand rest complete as per above Drg at Ser No. 21.00 |
| 155 | All as per srl item No 21.01 above but taking out unserviciable hydraulic jack and S & F new hydraulic jack with base plate complete as per above Drg at Ser No. 21.00 |
| 156 | All as per srl item No 21.01 above but taking out unserviciable costers and S & F new costers complete as per above Drg at Ser No. 21.00 |
| 157 | Note: (i) In case the tenderer quotes different rates for similar item then lowest rate shall only be applicable for payment and contractor shall not have any claim on this account.(ii) The Schedule of Credit amount shall be deducted from the total of this schedule (BoQ) to arrive at Contract Sum. |
