|
| 1 | Demolition of un-reinforced cement Concrete of any description and in any position not otherwise specifically provided for and removing rubbish to a distance n.exe 100 mcomplete all as specified and directed. |
| 2 | M & L for providing and filling light weight AAC bats (of size 40-60mm) with cement mortar mixed in the ratio 1:3:6 (1cement : 3 coarse sand : 6 block bats) including mixing of approved water proofing compound in recommended proportion, the laid AAC bats mix shall be well rammed and compacted as required; care shall be taken prior to filling all pipes passing through sunk portion such as the pipes are pressure tested by maintaining pressure for 24 Hours and junctions of pipes passing through walls, slabs are well grouted and sealed; this shall be tested by ponding water for required depth and maintaining for 75 Hourscomplete all as required and as directed. (Note: (I) Unit quoted rate shall deemed to include cost of AAC bats, cement mortar, top screed, labour charges for working at all levels, leads and heights, (ii) For payment the area of sunken slab and depth of filling including the thickness of screed shall be measured) |
| 3 | M & L for filling polymer modified non shrinking slurry for sunken floors of toilets by drilling holes to a depth of 60mm by 20mm dia at 1 mtr interval and applying 2mm thick Acrylic polymer modified elastomeric waterproofing membrane coating over the concrete syrfaces by mixing Acrylic emulsion cement modifier and water based concrete bonding agent and water including testing the same for 48 hours as per the manufacturer\"s technical specification complete all as specified and as directed Make: (a) Polymer modified non shrinking slurry = CEBEX 100 of M/S Fosroc or equivalent product ofM/s. Sika India Pvt. Ltd. or M/s. STP Ltd. orM/s. Choksey Chemicals Pvt. Ltd. or M/s Bostik India Pvt. Ltd. (b) Acrylic polymer modified elastomeric waterproofing membrane = Brushbond of M/S Fosroc or equivalent product ofM/s. Sika India Pvt. Ltd. or M/s. STP Ltd. orM/s. Choksey Chemicals Pvt. Ltd. or M/s Bostik India Pvt. Ltd. (C) Acrylic emulsion cement modifier and water based concrete bonding agent = NITO BOND BB with Brush bond powder of M/S Fosroc or equivalent product ofM/s. Sika India Pvt. Ltd. or M/s. STP Ltd. orM/s. Choksey Chemicals Pvt. Ltd. or M/s Bostik India Pvt. Ltd. |
| 4 | M & L for 10 mm thick, screed bed as in roof in cement mortar 1:3finishing the surfaces even and smooth without using extra cement mixed with water proofing compound as per manufacturer\"s instructions complete all as specified and directed. (Note: WPC shall be measured and paid seperately) |
| 5 | Supply only integral water proofing compound (ISI marked) complete all as specified and directed. |
| 6 | M & L for 25 mm thick, plain cement concrete 1:2:4,type B-0 (using 12.5 mm graded stone aggregate)as in sub-base of flooring, etc and finished the surface even and rough complete all as specified and directed. |
| 7 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) and disposal ofdebris and rubbish to outside MD land complete all as specified and directed. |
| 8 | M & L for non-skid, ceramic, coloured tiles 7 to 8 mm thick (square/rectangular) area of each tile exc 0.18 sqm but n.exc 0.38 sqm, in floors etc, including 15 mm thick screed bed in cement mortor 1:6 and set & jointed in neat cement slurry and pointed in white or coloured cement to match with the shade of tiles complete all as specified and directed. |
| 9 | M & L for non-skid, ceramic, coloured tiles 7 to 8 mm thick (square/rectangular) area of each tile exc 0.18 sqm but n.exc 0.38 sqm, as in vertical surfaces such as skirting/dado etc, including 10 mm thick screed bed in cement mortor 1:4 and set & jointed in neat cement slurry and pointed in white or coloured cement to match with the shade of tiles complete all as specified and directed. |
| 10 | M & L for glazed, coloured, ceramic, tiles of size (350mm x 250 mm/450mm x 350mm/300mmx450mm) x6 to 7 mm thick, on vertical surfaces such as skirting, dados etc, including 10 mm thick bedding in cement mortor 1:4 and set & jointed in neat cement slurry & pointed in white or coloured cement to match with the shade of tiles complete all as specified and directed. |
| 11 | Dismantling ofStone slabs of any description or thickness in floors, aprons etc.laid bedded and pointed in any mortar and removing rubbish upto a distanceto a distance n.exe 100 mcomplete all as specified and directed. |
| 12 | M & L for granite stone slab (of any type) 18 to 20 mm thick (Table rubbed and polished to smooth mirror finish), machine cut, colour Mexican Red/Ruby Red/Z black/Paerl black etc design/pattern as directed including inlays, borders, margins in two or more colours/shades as in floors, trades of steps, cill cooking platform etc set and beddedover 15 mm thick screed bed in cement mortor 1:6and jointed with grey cement slurry and pointed flush using polymer based cementitious tiling joint filler to match the shade of the Granite slabs& cutting, polishing complete all as specified and directed.(Note: Single stone slab shall be used for entire length/height of steps, jambs, pillars, window cills, cooking platform etc and joints shall match with the flooring complete) |
| 13 | Demolition of brick work or stone / boulder masonry, built in cement mortar including all quoins, pillars etc stacking the serviceable bricks after removing mortar and cleaning for re-use and disposal ofdebris and rubbish outside MD land as directed . |
| 14 | M & L for Brick work with fly ash brick, straight or curved on plan exc 6m mean radius, built in cement mortar 1:6 using old size brick complete all as specified and directed. |
| 15 | Demolition of reinforced cement concrete of any description and in any position not otherwise specifically provided for complete all as specified and directed. |
| 16 | M&L for reinforced cement concrete (1:11/2:3) type A2 using 20mm graded crushed stone aggregate asinslabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and the likeetc complete all as specified and directed. |
| 17 | Use and waste of form work to soffits of suspended slabs such as roof slabs, n. exc. 20cm thick (horizontal or sloping for fair finished concrete surface complete all as specified and directed. |
| 18 | S & F high strength corrosion resistant TMT steel bars 10 mm dia., and over cut to length, bend to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips quality complete all as specified and directed. |
| 19 | Taking down cement plaster on brick or stone walls etc including racking out joints, hacking for key, scrubbing down with water and removing rubbish to outside MD land complete all as specified and directed |
| 20 | M & L for rendering 10 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:6 and finished the surfaces even and fair without using extra cement complete all as specified and directed. |
| 21 | M & L for rendering 5 mm thick in cement mortor 1:3 on concrete surfaces as in ceilings and finishing surfaces even and fair without using extra cement complete all as specified and directed. |
| 22 | M & L for preparing newly plastered surfaces of wall and applyingtwo coats of oil bound washable distemper over a coat ofprimer including applying one or more coat of wall care putty to get a smooth surface including making good any undulations on the surfacescomplete all as specified and as directed.Note :- (i) Painting work shall be carried out acoording to Smart Painting procedure mentioned in PS(ii) Sanding of surfaces shall be done by mechanical sander with 1500-2700 rpm with internal dust extraction system for clean environment certified by the Paint manufacturer) |
| 23 | All as per item no 22 here in before but on ceiling |
| 24 | Taking down chowkats or frames, exc 1.5 but n.exc. 4 Sqm in each with shutter (without taking off shutter from the frame)complete all as specified and directed. |
| 25 | S&F Powder coated aluminium (minimum thickness of powder coating 50 micron) frame work for doors,windows, ventilators and partitions (Fixed portions) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS:733 and IS:1285, fixing with dash fasteners of required dia and size,including necessary filling up the gaps at junctions, i.e. at top,bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws, complete all as specified and directed |
| 26 | S&F Powder coated aluminium (minimum thickness of powder coating 50 micron) for shutters for windows ,door,ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/neoprene gasket required (Fittings shall be paid for separately) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws complete all as specified and directed |
| 27 | Supply only 5.5 mm thick, tinted glass, ordinary quality and glazing with aluminium beading/rubber beading exceeding 0.5 Sqm in each pane complete all as specified and as directed. (Note: The cost of rubber beads and fixing included with the unit quoted rate of respective UPVC/aluminium shutter) |
| 28 | S&F 6.00 mm thick, Prelaminated particle board, exterior grade, prelaminated both side with decorative choice lamination type fixed with rubber washer in aluminium frame work complete all as specified and directed. |
| 29 | Taking down chowkats or frame, n.exc 1.5 Sqm each with shutters (without taking off shutter from the frame) complete all as specified and directed. |
| 30 | S & F solid PVC door frames of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube complete all as specified and directed. |
| 31 | S & FFactory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, complete as per specification and drawing and as directed. |
| 32 | S&F 100 mm Butt hinges, medium weight, cold rolled mild steel complete all as specified and directed. |
| 33 | S & F 100 mm long, Aluminium anodised, barrel tower bolts of extruded section complete all as specified and directed. |
| 34 | S & F Aluminium alloy anodised sliding door bolt with hasp & staple (bolt type) and fixing clipes of sheet, cast or extruded sections and fixing bolts of extruded sectionsor cast aluminium alloy, length of bolt of 300 mm complete all as specified and directed. |
| 35 | S & F 150 mm size, extruded Aluminium alloy handles, fabricated type, anodised complete all as specified and directed. |
| 36 | S&F floor door stopper [ ISI marked ] of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor, overall length of cover plate 150mm complete all as specified and as directed. |
| 37 | S & F Aluminium (Die cast) body door Closer hydraulically regulated, designation No 3, universal type, suitable for door shutter of 851 to 1000 mm in width and of weight between 61 to 80 Kg complete all as specified and directed. |
| 38 | Taking up or down 15 mm bore steel tubing and connections, complete all as specified and as directed. |
| 39 | Taking up or down 20 mm bore steel tubing and connections, complete all as specified and as directed. |
| 40 | Taking up or down 25 or 32 mm bore steel tubing and connections, complete all as specified and as directed. |
| 41 | S&F 16 mm outer dia ,CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all asspecified and directed. |
| 42 | S&F 20 mm outer dia ,CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all asspecified and directed. |
| 43 | S&F 25 mm outer dia ,CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all asspecified and directed. |
| 44 | S&F 32 mm outer dia ,CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all asspecified and directed. |
| 45 | S & F in repair20 mm bore, gun metal, globe or Gate valves with iron wheel head, Class-I, Pressure Tested of 1.5 Mpa, screwed both ends for iron pipe complete all as specified and directed. |
| 46 | S & F in repair25 mm bore, gun metal, globe or Gate valves with iron wheel head, Class-I, Pressure Tested of 1.5 Mpa, screwed both ends for iron pipe complete all as specified and directed. |
| 47 | Taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etccomplete all as directed. |
| 48 | S & F 110mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints laid in trenches or in floors complete all as specified and directed. |
| 49 | S & F 110mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls complete all as specified and directed. |
| 50 | S & F 75mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls complete all as specified and directed. |
| 51 | S & F 75mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints laid in trenches or in floors complete all as specified and directed. |
| 52 | S & F 75 mm dia PVC (SWR) branch piece, single (single Y) equal or unequal complete all as specified and directed. |
| 53 | S & F 110mm dia PVC (SWR) branch piece, single (single Y) equal or unequal complete all as specified and directed. |
| 54 | S & F 110mm dia PVC (SWR) junction single, (Single T) equal or unequal complete all as specified and directed.. |
| 55 | S & F 110mm dia PVC (SWR) junction single, (Double T) equal or unequal complete all as specified and directed.. |
| 56 | S&F 110 mm bore PVC (SWR) bends of any radius with access door pressure rating 6kg/sqcm complete all as specified and directed. |
| 57 | S&F 75 mm bore PVC (SWR) bends of any radius with access door pressure rating 6kg/sqcm complete all as specified and directed. |
| 58 | S&F 110 mm bore, PVC (SWR) vent cowl pressure rating 6kg/sqcm complete all as specified and directed. |
| 59 | S & F 75 mm bore PVC (SWR) floor trap, with anti cockroach trap with waste hole gratingincludingjointing to waste pipe with solvent cement andfixed in cement concrete type B-1 (1:2:4) complete all as specified and directed. |
| 60 | S & F1000 litres capacityrotational moulded polyethylene water storage tanks, double layer construction, ISI marked (Cylindrical vertical with closed top), hoisted and fixed in position including taking down old unserviceable one as specified in SSR Part I and directed. |
| 61 | S & F in reapir ball valves 40 mm high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed. (Minimum weight 690 gms ) complete all as specified and directed. |
| 62 | S & F in repairs, 15mm bore, two way bib cock with wall flange cast copper alloy, chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed.Make: Jaquar Cat No. KUP-35041PM or equivelant of make as per List of manufacturer\"s mentioned in PS. |
| 63 | S & F in repairs fancy type long body chromium plated bib taps, cast copper alloywith capstan head, screwed down, screwed for 15 mm dia bore iron pipe complete all as specified and as directed. Make: JaquarCAT No. LYR-38037 or its equivelant model of make as per list of manufacturer |
| 64 | S & F in repair 15 mm bore, CP Health Faucet with 8mm Dia, 1.0 Meter Long Flexible Tube & Wall Hookwith all accessories complete all as specified and directed.Make: CAT No. ALD-573 of JAQUAR or its equivelant model of make as per list of manufacturer |
| 65 | S & F in repair tumbler holder, brass chromium plated, fixed in walls with plugs & chromium plated brass screws complete all as specified and directed.Make: CAT No. AQN-7741 of JAQUAR or its equivelant model of make as per list of manufacturer |
| 66 | S & Fin repairs 110 mmstainless steel grating fixed with white cement complete all as specified and as directed. |
| 67 | S & F in repairs,Vitreous China wash basin, Under Counter Basin with Fixing Accessories, Size: 480x365x205mm, Rectangular Shape excluding taps but including brass chromium plated waste fittings with long screw shanks and fly nuts, flange end bedded in red lead cement and other end fixed, rubber plug with rings including 32mm dia PVC flexible waste pipe of suitable length complete all as specified and directed. Make : Jaquar Cat No. CNS-WHT-701 or equivalent of make as per List of manufacturer mentioned in PS. |
| 68 | S & F in repair Towel Ring CPfixed with and including Chromium plated brass screws and wooden/plastic cleats (Minimum weight 90gms) as specified and as directed by Engr-in-charge.Make: Cat No. ACN-1121N of Jaquar or its equivelant model of make as per list of manufacturer |
| 69 | S&F in repair soap dispenser with glass bottlecomplete all as specified and directed.Make: Cat No. ACN-1135N of Jaquar or its equivelant model of make as per list of manufacturer |
| 70 | S&F in repairs, Toilet paper holder with with flap recessed type, , chromium plated fixed to wall with brass screw complete all as specified and directedMake: Cat No. AKP-35753PS of Jaquar or its equivelant model of make as per list of manufacturer |
| 71 | S&F in repair 15 mm bore, angular stop cock with wall flange, cast copper alloy, chromium plated, fancy type, screwed for iron pipe or for brass ferrule complete all as specified and directed. Make: CAT No. KUP-35053PM of JAQUAR or its equivelant model of make as per list of manufacturer |
| 72 | S&F in repairsPVC connection 15mm size with PTMT nuts of length 450mm complete all as specified and directed by Engineer-in-Charge. |
| 73 | S & F in repair 15 mm bore, Pillar Cock Auto Closing System , cast copper alloy, chromium plated, high pressure with all fittings, screwed for iron pipe complete all as specified and directed.Make: Jaquar Cat No. PRS-001 or equivelant of make as per list of manufacturer as mentioned in PS. |
| 74 | Supply and fixing in repair vitreous china (White) wash down water closet pan (pedestal pattern) with \"P\" or \"S\" trap front or back inlet, fixing bolts (except flushing cistern and flush pipe) incl plastic water closet seat cover (White) and mild steel chromium plated or aluminium hinging device complete all as specified and directed by Engr-in-Charge. |
| 75 | S&F in repairs 10 litre capacity PVC valveless syphonic action type flushing cistern, low level, white, with inlet, ball valve, float and handle including bracketscomplete all as specified and directed. |
| 76 | S & F in repairs Vitreous China Rimless Single Piece WC with UF soft close slim seat cover, Hinges, Fixing Accessories, Accessories Set and dual flushing Cistern Fittings, Size: 390x645x845 mm, S/P Trap - 300 mm and all fittings and fixtures including connection to outgoing drain including making good damaged/disturbed surfaces complete all as specified and directed. Make: Jaquar Cat No. ONS-WHT-10753P180UFSMZ or equivelant model of make as per list of manufacturer mentioned in PS. |
| 77 | S & F in repairs, fancy type wall mounted bevel edged looking mirror of 6.00 mm thick,belgium glass fixed with stainless steel studs complete all as specified and directed. |
| 78 | S & F in repairsVitreous China urinal, with all Fixing Accessories Set without sensor, of Size 480x300x740mm, Starwhite with grating and union for discharge pipe (excluding flushing cistern, flush pipe & waste pipe) including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60 mm long brass screws, pointing around urinal back in cement complete complete as specified and directed. (Make: Jaquar Cat No. URS-WHT-13255 or equivelant of make as per list of manufacturer\"s) |
| 79 | Fixing only Urinal partitions slabs terminating about 40cm above floor line complete all as specified and directed |
| 80 | S&F brass chromium plated tubular towel rail, 20mm dia, D type, 60cm long between flanges complete all as specified and directed. |
| 81 | Cutting chases, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills,sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring,etc., and making good, cutting not exc 10 cm girth as in brick wall complete all as specified and directed. |
| 82 | Cutting holes into or through cement concrete slabs, chajjas, etc. reinforced or otherwise exe 500 sqcm but n.exc 0.1 sqm and making good the disturbed surface complete all as specified and directed. |
| 83 | Cutting holes into or through brick walls built in cement mortar and making good in cement mortar 1:3 or cement concrete 1:2:4 type B-l as required of superficial area exc 400 sq.cm but n.exc 0.1 Sqm complete all as specified and directed. |
| 84 | Demolition and breaking 150 mm bore drain pipes (SGSW/AC/RCC) set in cement mortar including cement concrete bedding and removal of debris/rubbles etc to a distance outside MD land complete all as specified and directed. (Note: Necessary axcavation and earth work shall be measured and paid seperately) |
| 85 | M & L Reinforced concrete pipes, class NP2, 150 mm bore, laid and jointed with collars complete all as specified and as directed. |
| 86 | M & L for Plain cement concrete 1:3:6, type C-2 (using 40 mm graded stone aggragate) as in concrete bed to drain pipes including packing under and haunching against the sides of pipes after they are laid and tested for 150 mm bore RCC drain pipes complete all as specified and directed . |
| 87 | Excavation in trenches n.exc 1.5 m wide and n.exc 1.5 m in depthfor foundation, etc and getting out in hard/dense soil complete all as specified and directed. |
| 88 | Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm as in hard/dense soil soil complete all as specified and directed. |
| 89 | Removing excavated materials n.exc 50 m and depositing where directed at a level n.exc 1.5 m above the starting point complete all as specified and directed. |
| 90 | M & L for Precast Reinforced Cement Concrete 1:2:4, type B-1 (using 20 mm graded stone aggregate) as in cover slab (For manhole etc), chullah hoods, chajjas, water troughs, mangers, shelves and similar articles with plain facesand set in cement mortar 1:4 including necessary form, moulds, etc complete all as specified and directed by the Engr-in-Charge. (Note : Reinforcement shall be measuredand paid separately) |
| 91 | M & L for reinforced cement concrete (1:2:4), type B1 (using 20mm graded stone aggregate) as in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, including necessary formwork complete all as specified and as directed. |
| 92 | M & L for Plain cement concrete 1:3:6, type C-2 (using 40 mm graded stone aggregate) as in foundation, filling and mass concrete, etc complete all as specified and directed. |
| 93 | M & L for conceledPoint wiring with two runs of single core 1.5 Sq.mm. (Nominal area) PVC insulated unsheathed multistranded copper conductor cable FRLSH (ISI marked) drawn through and including non metallic PVC conduit 20 mm bore (Minimum) medium grade (ISI marked) concealed type includingmetal GI boxes of suitable module including modular white cover plate of suitable module for fixing modular type switches, sockets, regulators etc. including provision of multistranded 1.5 Sq.mm copper conductorcable FRLSH [ISI marked] as earth wire connected to common earth dolly and earth in distribution board complete all as specified and as directed,for one light/exhaust fan/fan point/call bellcontrolled by one way switch.(Note.: (i) The rate quoted is deemed to include making good the disturbed sufaces and to match the adjoining surface. (ii) The quoted rate is deemed to include cutting chases for concealed wiring including making good the same as per the existing one) |
| 94 | S & F switch modular single pole one way 6 amp 240 volts,1 Module complete all as specified and as directed. |
| 95 | S&F ceiling rose, 65 X 50mm two to three terminals, PVC / polycarbonate, insolated body complete all as specified and directed. |
| 96 | M & L for Sub main wiring with 2 runs of Single core 2.5 sqmm [ for Phase & Neutral ]PVC insulated multi stranded FRLSH (ISI marked) copper cable drawn through and includingconcealed PVC conduit of suitable size (medium grade) with all conduit accesories and fittings along with 1 run of single core 2.5 sqmm PVC insulated multi stranded FRLSH (ISI marked) copper cableas earth continuity conductor complete all as specified and as directed.(Note :- (i) Two runs of 2.5 sqmm and one runs of 2.5 sqmm cable as earth wire and one run of conduitshall be measured as one length, (ii) The quoted rate is deemed to include cutting chases for concealed wiring including making good the same as per the existing one) |
| 97 | Supply and fixing LED lights fitting 1x 20W, 220V,AC decorative box type with driver, holder including LED tube light connecting up with three core flexible,copper conductor cable of suitable size from ceiling rose complete,all as specified and as directed |
| 98 | Supply and fixing LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and as directed |
| 99 | S & F Distribution Board, SPN 4 Way, 240V, Double door with IP 43 protection IK 09 complete all as specified and as directed. |
| 100 | S&F MCB SPN 6-32A Amps, 240 Volts,10KA, C Curve complete all as specified and as directed |
| 101 | S&F MCB SP 6-32A Amps, 240 Volts,10KA, C Curve complete all as specified and as directed |
| 102 | Supply and fixing exhaust fan 300 mm sweep,metal body suitable for operation on single phase 240 V AC, 50 Hz and including connecting up withtwin core PVC insulated , sheathed flexible copper conductor cable of size 1.50 sqmm including making necessary hole in wall including making good disturbed surfaces to match with surronding complete all as specified and directed. |
