|
| 1 | M & L for cleaningof blockage manually by rodding,pumping etc and removing the deposited sludge/solid/liquid material,outside MD land, complete all as specified and directed from the following |
| 2 | (a) Water closet (Indian or European), trap & CI pipe line upto first manhole |
| 3 | (b) Floor/Nahani trap of kitchen/Bathroom upto gully trap |
| 4 | Cleaning of SGSW/PVC pipes of any dia / boreby rodding from manhole to manhole or manhole to septic tank or vice versa and well flushing with water after cleaningand removingwaste material etc to a distance n. exc 50m and burrying in pits and re-filling the same complete all as specified and as directed. Note:-The cost for excavation and earth work for pits and taking off manhole cover and placing the same in position after cleaning, is deemed to be included in the unit rate. |
| 5 | Dewatering/Desludging of sewage waste in septic tanks, soakage well and manholes any size and cleaning by taking out solid content /sludge from septic tank and manholes of any depth using mechanical means i.e. mechanical suckerwith pump set to remove mud/ sludge/muck/human excreta in foul conditions and confined places, getting out and removing , where directed complete all as specified and directed.(a) the waste shall be removed through mechanically operated sewage sucker only (b)The sewage sucker shall be made available by contractor during office hours whenever called for.TheRecovery @ Rs 2000/day shall be effected for delay in removing mud/ sludge etc. |
| 6 | Hacking out old broken glass panes (any thickness size, quality or description) from metal frames including punching or drilling out old glazing pins/spring clips and providing and fixing new ones complete all as specified and directed. |
| 7 | 3 mm thick sheet glass ordinary quality and glazing with oil putty or wooden beads in squares not exceeding 0.50 Sqm in each pane complete all as specified and directed. |
| 8 | 4 mm thick figured glass, pin head type and glazing with oil putty in squares not exceeding 0.5 sqm in each pane complete all as specified and directed. |
| 9 | Taking down chowkhat or frames with shutters (without taking off shutters from the frames) not exceeding 1.5 Sqm each including cutting holes for taking out hold fasts, dismantling brick work (holes cut and any other damages to jambs, walls for taking out hold fast shall be finished identical to existing finish without any extra cost) complete all as specified and directed. |
| 10 | Taking down shutters of any description exceeding 1 square metre each and not exceeding 2 Sqm complete all as specified and directed. |
| 11 | Solid PVC door frame of size 50 mm x 47 mm made out of 5 mm plain colour PVC sheet reinforced with M.S. square tube and fixed in opening as per specification and drawing complete all as specified and directed. |
| 12 | 30 mm thick, factory made solid panel PVC door shutter (style) consisting of frame made out of M.S tube for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rails and bottom rail on either side & as gap insert for top rail & bottom rail, Paneling of plain colour PVC sheet to be fitted in the M.S. frame welded/sealed to the stiles & rails with suitable PVC sheet beading and joined together with solvent cement, fixed in the frame at site as per specification and drawing complete all as specified and directed. |
| 13 | Aluminum anodised barrel tower bolts of extruded section with 150 mm long bolt complete all as specified and directed. |
| 14 | Aluminum handles cast type, anodised, 150 mm size complete all as specified and directed. |
| 15 | Mild steel cold rolled butt hinges mediumweight 75 mm long, including fixing to pressed steel door frame.cupboard & Almirah if required complete all as specified and directed. |
| 16 | Taking down cement plaster, any description on brick or stone or cement concrete walls including raking out joints, hacking for key, scrubbing down with water complete all as specified and directed. |
| 17 | 15 mm thick rendering in two layers (10 mm + 5 mm) on fair faces of brick/concrete or stone surfaces in cement mortar 1:4 and finished even and smooth without using extra cement complete with water proofing complete all as specified and directed. (WPC shall be measured separtely). |
| 18 | 10 mm thick rendering on fair faces of brick /concrete surfaces in cement mortar 1:6 and finished even and smooth without using extra cement complete all as specified and directed. |
| 19 | 10 mm thick rendering on fair faces of brick /concrete surfaces as in ceiling in cement mortar 1:3 and finished even and smooth without using extra cement complete all as specified and directed. |
| 20 | Supply only liquid water proofing compound as per latest IS specificationcomplete all as specified and directed. |
| 21 | M&L for applying two coats of cement base paint on walls after preparation of newly plastered surfaces complete all as specified. |
| 22 | M & L two coat of Oil bound distemper including a coat of primerincluding preparation of newly plastered surfaces of wall. |
| 23 | M&L for preparation of new plastered surfaces on ceiling and applying three coats of white wash.complete all as specified and directed. |
| 24 | Preparation of old painted decoratedwooden surfaces over 10 cms width or girth and applying one coat of synthetic enamel paint complete all as specified and directed. |
| 25 | M & L for preparation of old painted steel surfaces of any description, over 10 cm width or girth, not other wise described and applying one coat of synthetic enamel paint complete all as specified and directed. |
| 26 | Applying two coats of oil emulsion distemper on walls including preparation on old plastered surfaces complete all as specified and directed. |
| 27 | Preparation of new and old surfaces on wall and applying 1mm thick coat of wall putty (JK/Birla) to make the surface smooth and even complete all as specified and directed. |
| 28 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) removing serviceable tiles to store and rubbish off the premises complete all as specified and directed. |
| 29 | Screed bed or bedding layer of mortar 15 mm thick in cement mortar 1:4for laying floor finishes complete all as specified and directed. |
| 30 | Non-skid coloured ceramic tiles (square/ rectangular) 7 to 8 mm thick, area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm as in floors, set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface complete all as specified and directed. |
| 31 | M&L for light shade double charged Vitrified tiles 8-10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of existing surfaces.(Note:The contractor shall have no claim on difference what so ever on shade /colour of tile) |
| 32 | Vitreous China squatting pan, \"Orissa\" pattern, size 580 x 440 mm white, with integral foot rests including a provision of concrete bedding but fixed in repair complete all as specified and directed. |
| 33 | 10 ltr PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets in repair complete all as specified and directed. Make : CERA or equivalent |
| 34 | Supply only flush pipe of polyethylene of low or high density or PVC, 32 mm dia, for low level cistern complete all as specified and directed. |
| 35 | Vitreous China wash basin, white, flat back, size 550 x 400 mm excluding tap, chain, plug but including waste coupling, waste pipe, fixing of taps, fitting and brackets and cutting for and pinning in ends of brackets in repair complete all as specified and directed. |
| 36 | S & F in repairs 600 mm x 450 mm mirror of 5 mm thick selected quality glass, mounted on 6 mm thick commercial plywood with aluminium frame and fixed to wooden plugs with chromium plated brass screws and cup washers complete all as specified and directed. |
| 37 | Brass CP shower rose 125 mm size in repair complete all as specified and directed. |
| 38 | Stop valve/Angle valve, cast copper alloy screwed down, high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for unions of 15 mm bore in repair complete all as specified and directed. |
| 39 | Pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure with or without lettered \"Hot\" or \"Cold\" with long screwed shanks and fly nuts, screwed for iron pipe of bore 15 mmin repair complete all as specified and directed. |
| 40 | Bib taps, fancy type, cast copper alloy chromium plated with crutch or butterfly handle screwed down for iron pipe or for brass ferrule and fixed for bore of pipe 15 mm in repair complete all as specified and directed. |
| 41 | PVC connection 15 mm size with PTMT nuts of length 450 mm in repair complete all as specified and directed. |
| 42 | 32 mm dia waste coupling fittings brass chromium plated for glazed ware sink, basins etc with long screwed shank and fly nuts, flanges end bedded in red lead cement and other end fixed in repair complete all as specified and directed. |
| 43 | Stainless steel grating doom 100 mm dia of PTMT (minimum weight 25 gms) but in repair complete all as specified and directed. |
| 44 | S&F in repair PVC waste Pipe 32/40mm dia and fixed complete all as specified and directed |
| 45 | S&F in repair Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified. |
| 46 | S&F Toilet paper holder with flat recessed type stainless steel Complete all as specified and directed. |
| 47 | S&F Liquid soap container of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats. (Minimum weight 105gms) |
| 48 | S&F Towel Ring of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats (Minimum weight 90gms) |
| 49 | S&F in repair Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long |
| 50 | S & F in repair, Vitreous china premium/ 1st quality wash down water closetone piece /wall hung EWC white/ ivory/off white (closed pattern incl all necessary accessories like rag bolts/ gel gasket etc.(excluding flushing cistern & flush pipe) complete in all respect all as specified. |
| 51 | S & F in repair wall/wash basin Brass CP mixer for mixing hot & cold water screwed down for iron pipe Complete all as specified and directed. |
| 52 | Taking up or down steel tubing with connections for cleaning for refixing or removing to store/yard complete of bore 15 mm complete all as specified and directed. |
| 53 | Taking up or down steel tubing with connections for cleaning for refixing or removing to store/yard complete of bore 20 mm complete all as specified and directed. |
| 54 | Steel water tubing medium grade galvanised with all fittings including short lengths, fixed to walls, concealed in wall and ceiling or laid in floor complete with all fittings (such as bends, elbows, Tee, short pieces, connectors, back nuts, diminishing pieces, caps and plugs, unions etc.) of nominal bore 15 mm dia complete all as specified and directed. |
| 55 | All as per ser item No 91 but 20 mm dia complete all as specified and directed. |
| 56 | Cutting chases in brick wall, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels etc. and cutting chases for concealed water tubing or concealed conduit wiring etc. and making good, cutting not exceeding 10 cm girth complete all as specified and directed. |
| 57 | Dismantling water tanks and removing to store exceeding 250 and not exceeding 500 ltrs of capacity complete all as specified and directed. |
| 58 | Rotational molded (triple layered as per IS 12701) polyethylene water storage storage tank (cylindrical vertical with closed threaded top) hoisted and fixed in position including connecting inlet/outlet pipe connecting with necessary fittings including fixing of cover lid with screws all as required at site and specified in SSR part-I of capacity 500 litres complete all as specified and directed by Engr-in-Charge. Make - Sintex/Rotex or equivalent |
| 59 | Dismantling water tanks and removing to store exceeding 500 and not exceeding 1000 ltrs of capacity complete all as specified and directed. |
| 60 | S&F for 1000 ltrs capacity rotational moulded polythylene water storage tank (Cylindrical vertical with closed top and triple layer with white colour) hoisted and fixed in position all as specified in SSR Part I. |
| 61 | Ball valves of size 20 mm bore dia high pressure of PTMT (Make-Prayag) with epoxy coated aluminium rod and high density plastic ball (Minimum weight not less than 210 gms) screwed for iron pipe and fixedincluding necessary fitting as required at site as in repair complete all as specified and directed by Engr-in-Charge. |
| 62 | Taking down eaves gutters and rain water pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc. including cleaning or refixing or removal to Store (measured overall and fixed along the centre line over fittings and accessories) complete all as specified and directed. |
| 63 | S&F for PVC (SWR) floor trap with dia of outlet 75mm with grating including jointing to waste pipe fixed in cement concrete PCC 1:2:4 type B-1 complete all as specified. |
| 64 | S&F 110 mm borePVC (SWR) pipes single socketed,inanylength with rubber ring joints, laid in trenches or in floors |
| 65 | S&F 75 mm borePVC (SWR) pipes single socketed,inanylength with rubber ring joints, laid in trenches or in floors |
| 66 | S&F 110 mm borePVC (SWR) pipes single socketed,inanylength with rubber ring joints, fixed to wallsor in floors |
| 67 | S&F 75 mm borePVC (SWR) pipes single socketed,inanylength with rubber ring joints,fixed to walls |
| 68 | S&F 75 mm PVC (SWR) bends any radius |
| 69 | S& F 110 mm bore PVC SWR bendsand fixed with joint sealent etc complete all specified and as directed |
| 70 | S&F stack clamps out of 50mm by 5mm flat iron and 6mm dia round iron stays,including bolts and nuts and securing ends of stays to wall or roof100mm bore of pipe complete all as specified and as directed. |
| 71 | S&F 110 mm PVC (SWR) junction single, (Single T) equal or unequal |
| 72 | S&F 75 mm PVC (SWR) junction double, (double T), equal or unequal |
| 73 | S&F for PVC (SWR) reducers |
| 74 | S&F for 75 mm PVC (SWR) vent cowl |
| 75 | Deduction to be made from BOQ for schedule of credit (Sch \"A\" Part - II) Amount of ₹ 17,895.00during AOCNote:- Tenderers shall not quote for this Schedule |
