|
| 1 | M&L for non skid ceramictiles (coloured) 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm as in floors set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles over & including 15mm thick screed bed in cement & sand mortar 1:6 including dismantling of floor hearthcomplete all as specified and as directed. |
| 2 | M&L for Heavy Duty Vitrified tiles of size 600x600x10mm thick as in floors set and jointed using spacers of 5-6mm gap and joint filled with epoxy over & including 15mm thick screed bed in cement & sand mortar 1:6 including dismantling of floor hearth complete all as specified and as directed. |
| 3 | All as per above item 2 buton vertical surfaces including 10mm thick rendering in CM 1:4 , complete all as specified and as directed. |
| 4 | M&L for glazed ceramic tiles 600x300 x 10mm thick coloured on vertical surfaces such as skirting/dados etc,set & jointed in neat cement slurry & pointed in coloured cement to match the shade of tiles overand including rendering 10 mm thick in CM 1:4 on wall including dismantling of wall tiling complete all as specified and directed. |
| 5 | M&L for Full body vitrified tiles light shade 8-10 mm thick, area of each tiles n. exc 0.36 sqm in floors, set and pointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles over and including 15 mm thick screed bed in cement mortar 1:6 incl dismantling of tiles complete all as specified and directed |
| 6 | All as per above item 5 buton vertical surfaces including 10mm thick rendering in CM 1:4 , incl dismantling of wall tiles complete all as specified and as directed. |
| 7 | M&L for brick work with sub class \"B\" bricksm staiaght or curved on plan exc 6m mean radius built in cement motar 1:6 incl Demolition of brick work built in cement motar or cement line motar as in pillars, brick wall, quoins, arches etc. complete all as specified. |
| 8 | M&L preparation of surface and applying 15 mm thick ready mix plaster on walls of concrete/ brick surface andapplying Two coat of cement based paint over a coat of primercomplete all as specified. |
| 9 | M&L preparation of surface and applying 10 mm thick ready mix plaster on walls of concrete/ brick surface incl taking down cement plaster incl preparation of newly plastered surface and applying plaster of paris puttyof 1 mm thickness over plastered surface to prepare the surface even and smooth and applying two coat of distemper oil emusion paint complete all as specified and directed. |
| 10 | M&L preparation of surface and applying 5 mm thick ready mix plaster on ceiling/fascia/roof projection and finishing even and smooth without using extra cement incl taking down cement plaster including preparation of newly plastered surfaces of ceiling and applying two coats of white wash complete all as specified. |
| 11 | M&L preparation of surface and applying 15 mm thick ready mix plaster on walls of concrete/ brick surface incl taking down cement plaster includingpreparation of newly plastered surface of wall andapplying Two or more coats of Exterior Emulsion paint and including priming coat of exterior primer appliedover new surface complete all as specified. |
| 12 | Supply only integral water proofing compound complete all as specified and directed. |
| 13 | Taking down chowkhat or frames with shutters (without taking off shutters from the frame) not exe 1.5 Sqm each including iron mongeriescomplete all as specified and directed. |
| 14 | Taking down chowkhat or frames with shutters (without taking off shutters from the frame)exe 1.5 Sqm but not exc 4.0 Sqm eachincluding iron mongeries complete all as specified and directed. |
| 15 | Taking down old shutter exc 1.0 sqm but n exc 2.0 Sqm complete all as spd and directed. |
| 16 | S&F forFactory Made Solid extruded wood polymer composite solid door/window/ceosetory window & other frame chowkhat of size 165x125 mm comprising of virgin polymer of k value 58-60,calcium carbonate and natural fibres and non toxic additives fabricated with miter jointsafter applying pvc solvent and screwed with full body threaded star headed ss screws having minimum frame density of 750kg/cum,screw withdrawl strength of 2200 N and1100N,minimum compressive strength 58 N/mm2,modules of resistance 900N/mm2 & resistance to& fixing in position with holdfast /lugs/ fasterners of reuired depth as per directions of engineer-in-charge complete all as speciifed and directed. |
| 17 | S&F forFactory Made Solid extruded wood polymer composite solid door/window/ceosetory window & other frame chowkhat of size 65x100 mm comprising of virgin polymer of k value 58-60,calcium carbonate and natural fibres and non toxic additives fabricated with miter jointsafter applying pvc solvent and screwed with full body threaded star headed ss screws having minimum frame density of 750kg/cum,screw withdrawl strength of 2200 N and1100N,minimum compressive strength 58 N/mm2,modules of resistance 900N/mm2 & resistance to& fixing in position with holdfast /lugs/ fasterners of reuired depth as per directions of engineer-in-charge complete all as speciifed and directed. |
| 18 | S&F forFactory Made Solid extruded wood polymer composite solid door/window/ceosetory window & other frame chowkhat of size 45x70 mm comprising of virgin polymer of k value 58-60,calcium carbonate and natural fibres and non toxic additives fabricated with miter jointsafter applying pvc solvent and screwed with full body threaded star headed ss screws having minimum frame density of 750kg/cum,screw withdrawl strength of 2200 N and1100N,minimum compressive strength 58 N/mm2,modules of resistance 900N/mm2 & resistance to& fixing in position with holdfast /lugs/ fasterners of reuired depth as per directions of engineer-in-charge complete all as speciifed and directed. |
| 19 | S&F actory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of 30mm thick size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In-Charge. |
| 20 | S&F 30 mm thick flush shutter solid core construction with block board core and plywood faced panels commercial type on both sides including 0.9 mm thick decorative laminate type-I of surface finish color and pattern as approved with adhesive both sides complete all as specified and directed. |
| 21 | S&F 30mm thickFACTORY MADE WIRE MESH SOLID WPC DOOR SHUTTER consisting of Density 500 Kg /Cbm Manufactured by an ISO-9001-2015 certified Company, Door to be panelled with SS mosquito Mesh and XTN aluminium Mesh for additional strength and safety purpose.(confirming as per IS:4020). The door should be water proof, termite proof, fire retardant and having screw holding capacity. Door to be fixed to frame with 3 nos. M.S powder coated butt hinges size 100mm*25mm*2mm and 32mm long steel screws drilled suitable to pass through both the walls of the M.S tube. Other hardwares should be fixed with 19*6mm size steel screws etc. Complete as per direction of Engineer-in -charge, manufacturer\"s specification & drawings.The wire gauge shall be stretched to tighten firmly complete all as specified & as directed. |
| 22 | S & F factory made 35 mm thick IInd class HW glazed & skeleton shutters open rebated and prepared to receive glass gauge etc. (without sash bars) edges of framing plain chamfered or rounded fitted with cut & mitered beads for security glass/gauge etc. size of members of shutter ,divided into squares with plain chamfered rounded, mitered and rebated sash bars complete all as spd and directed. |
| 23 | S&F for Factory Made Solid PVC Moulded Door Shutter, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded PVC PrelamSheet on the front face & 2mm Prelam colour PVC sheet on back face, supplying & fixing in frame at site as per specification & drawing complete all as specified and directed. |
| 24 | S & F Providing and fixing factory made uPVC white colour Sliding window Three track made of extruded profiles with wall thickness of 2.3mm (+ -0.2mm). Window profile with hollow section with multi chamber. Frame (88mm x 52mm), sliding sash (42mm x 67mm). Sliding mesh Sash (42mm x 57mm) Sliding interlock (One vertical length in each shutters) (45.5mm x 28mm), Glazing bead (24.5mm x 16mm) will be miterd cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware. EPDM gasket, 1.2+ -0.2mm thick galvanised steel Frame (30mm x 18mm) 2 nos, sliding sash (30mm x 18mm), sliding mesh sash (26mm x 10mm) profile to be inserted in required profile, frame will be fixed to the wall with 8mm x 100mm long fasteners, Hardware [Touch Lock of zinc alloyed (white powder coated), steel roller system. Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and required accessories. (Note: The unit rate quoted by contractor excludes cost of glass and includes all other connected accessories. Net Opening will be measured for payment purpose.) |
| 25 | Area not exceeding 2.00 sqm each |
| 26 | Area exceeding 2.00 sqm each |
| 27 | Supply only 10mm thick toughened glass as approved by GE |
| 28 | S & F side doubleleaf shutter of rolled Z steel section as per IS 1038 including MS Suitable peg stay ,box type hinges 02 in each shutter,MS tower bolt with plate 100mm 02 Nos in each shutter ,MS Handle 01 Nos in each shutter welded to frame and 12 mm square guard bars welded to frame 150 mm C/C. The shutters are to be secured with hinges welded to mild steel pressed steel frame of overall size 100*40mm and casted out of 1.25 mm thick sheet complete all as spd and directed. |
| 29 | M&L forpreparation of newly painted surfaces of steel and iron work of any description over 10 cm width or girth and applying two coat of synthetic enamel paint,over a coat of red oxide primer complete, all as specified and as directed |
| 30 | S & Fstainless steel butt hinges heavy Duty of 125mm size complete all as specified and directed. |
| 31 | S & F in repair 100mm M.S butt hinges with MS frame work by spot welding incl necessary arrangement and handling of welding machine upto third floor of Bldg complete all as directed and specified by Engineer- in-charge. |
| 32 | S&F200 mm long Stainless Steel barrel tower bolts complete all as specified and directed. |
| 33 | S&F200 mm long aluminum anodized barrel tower bolts of extruded section & fixed complete all as specified and directed. |
| 34 | S&F150 mm sizeStainless Steel handles complete all as specifed and directed |
| 35 | S&F150 mm sizealuminum handles cast type anodized complete all as specifed and directed |
| 36 | S&F stainless steel sliding door bolt with hasp , staples (bolt type) and fixing clipsof sheet cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed 250 mm long complete all as specified and directed. |
| 37 | S & F in repair 140mm door stopper of Stainless steel body and tongue, with hard drawn steel spring, fixed complete all as specified and directed. |
| 38 | Supply and fixing of M.S. steel door spring of size 300mm in wooden/steel frame by welding or screwing as which ever is appropriate for fixing in frame complete all as specified and directed. |
| 39 | S & F including fabricating of anodised aluminium powder coated having minimum thickness of powder coating 50 micron for door / window / ventilator frame, shutters and partition including necessary joining cleats, glazing clips, aluminium snap beading having minimum wt 100gm/RM, rubber neoprene gasket, screws, dash fasteners, rawel plug for fixing of screw in wall or floor etc. aluminium sections as approved by GE complete all as specified and directed. |
| 40 | S&F aluminium grills anodised of size exc 5mm x 7.5mm and aperture n. exc 80 mm incl fixing with aluminium channel 1mm thick with steel screw and tint match with existing complete all as specified and as directed |
| 41 | S&F mild steel work as in small ariticles as bend, strap, hold fast,jiost,angles and smiliar articles Fe-410W Gde Ecomplete all as speciifed and directed. |
| 42 | Refixing of wooden shutters including taking down of any description exceeding 1 sqm but not exceeding 2 sqm each in same or other opening(s)after resecuring or easing & adjusting, complete all as specified and directed. |
| 43 | S&F in repair galvanized mild steel wire cloth, 0.56 mm nominal dia of wire and average width of aperture 1.18 mm and fixed with tinned tacks, or galvanized wire staplescompleted all as specified and directed. |
| 44 | S&F 3 mm thick sheet glass ordinary quality type & glazing with oil putty in squares not exc 0.5 Sqm in each pane with wooden beads/putty including hacking out old glass from frames glazed with p[utty or fixed with beads complete all as spd and directed |
| 45 | M&L in repairs for 3mm thick figured or pin headglass ordinary quality and glazing with oil putty/beadings in square n exc 0.5 sqm in each pane, size quantity or description from wooden frame/Steel frame/aluminium frame complete all as directed byEngineer-in-Charge |
| 46 | S&F in repair fancy type decorated Stainless steel curtain hanging rods 25 mm dia heavy duty (304 grade)including brackets, including fixing arrangement,heads at both ends and making up repair work and all fitting complete all as specified and directed. |
| 47 | Supply and fixing of Aluminium door strip 40mm in bottom of door complete all as specified and directed. |
| 48 | S&F in repair,aluminium (extruded section body) door closer hydraulically regulated,designation No. 3universal type, suitable for door shutters up to 851 to 1000 mmin width and of weight between 61 to 80 kgcomplete all as specified and directed. |
| 49 | S&F in repairdouble action floor spring hydaulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivotmade of brass,other parts made of mild steel heavy duty including necessary cutting to floor and concrete work complete all as specified and directed. |
| 50 | Taking down existing aluminium doors in any size and in any description with complete fittings and fixture and refixing in the same opening after repairing/servicing/greqasing & adjustment of floor spring etc complete all as specified and directed.Note: Material like aluminium snap beading, rubber gasket and glass shall be paid separately |
| 51 | Supply only powder coated aluminium snap beading as approved by GE |
| 52 | Supply only rubber gaskete for packing of glass panes as approved by GE |
| 53 | Supply only 5mm thick tinted glass of selected quality as approved by GE |
| 54 | S&F in repairsMild steel Mortice lock double handle, vertical type, 06 levers for door complete all as spd and directed by Engr in charge. |
| 55 | S&F cast iron soil waste and vent pipes in any length with or without ears with lead joints in trenches or in floors or wall using Spun pipes CI pipes 100 mm bore pipes etc complete all as specified including dismantling old pipe complete all as specified and directed. |
| 56 | S&F cast iron soil waste and vent pipes in any length with or without ears with lead joints in trenches or in floors/walls using Spun pipes CI pipes 75mm bore pipes etc complete all as specified including dismantling old pipe with fittings complete all as specified and directed. |
| 57 | S&F 100mm bore Cast ironbend, any radius complete all as specified and directed. |
| 58 | S&F 75mm bore Cast Ironbend, any radius complete all as specified and directed. |
| 59 | S&F, 100 mm bore Cast iron floor trap, with grating including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4) Complete all as spd and directed. |
| 60 | S&F, 75 mm bore Cast iron floor trap, with grating including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4) Complete all as spd and directed. |
| 61 | S&F GI tubing 15mm dia bore medium grade with and including all fittings and fixed to wall, floor and ceiling including taking down old 15 mm bore steel tubingetc complete all as specified andasdirected. |
| 62 | S&F GI tubing 20mm dia bore medium grade with and including all fittings and fixed to wall, floor and ceiling including taking down old 20 mm bore steel tubing etc complete all as specified andasdirected. |
| 63 | S&F GI tubing 25mm dia bore medium grade with and including all fittings and fixed to wall, floor and ceiling including taking down old 25 mm bore steel tubing etc complete all as specified andasdirected. |
| 64 | S&F in repair coloured vitreous china EWC including cistern (Cascade Pattern) wall hung/floor mounting as single piece closet of parryware or equivalent including all fitting & fixtures required for proper function complete including necessary pipe, bend, making holes into existing wall, floor etc and making good with PCC 1:2:4 type B1 using 20mm graded stone aggregate complete all as specified and directed. (Make : Jaguar or equivalent) (Jaguar : Cat PartNumber : VGS-WHT-81853P180UF) |
| 65 | S&F in repair vitreous china wash down water closet pan pedestal pattern white (excluding fixing bolts, flushing cistern) including flush pipe of polyethylene of low or high density or PVC, 32 mm dia, for low level cistern etc all as specified and directed.. |
| 66 | S&F in repairs vitreous china squatting pan (Orissa pattern) water closet (white) of size 580x440mm with integral foot rests, \"P\" or \"S\" trap, including connection to trap and flushing pipe, antisyphonage pipe incl PCC 1:5:10 type E2 in filling and making good to floor etc all as specified and as directed. |
| 67 | S&F in repair plastic water closet seat cover black/white, closed pattern with flat bottmom & cover and aluminum anodised hinging device all as specifed and as directed. |
| 68 | S&F in repairs ofPVC flushing cistern 10 ltr capacity valve less symphonic action type low level with and incl ball valve float & handle, waste pipe & fixing accessoriesto wall complete all as specified and directed. |
| 69 | S&F in petty repairs for flush cistern of Concealed/Wall mounted/Single Piece with necessary flush fittings Kit completeas required at site, complete all as specified and directed |
| 70 | S&F in repairs two way bib tap, 15mm bore complete all as specified and as directed by Engineer-in-Charge. |
| 71 | S&F in repair Brass chromium plated healthfaucets with flexible pipe length not less than 1.00 mtr (minimum) fixed for EWC/IWC suitable for 15mm bore pipe complete as directed. |
| 72 | S & F in repair Bib cock long body with flange, 15 mm dia, cast copper alloy, fancy type ,chromium plated, screwed down , screwed for iron pipe or for brass ferrule and fixed, Quarter turn with water saving nozzle complete all as specified and as directed. |
| 73 | S&F in repair brass chromium plated Toilet paper holder complete as specified and directed |
| 74 | S&F in repairsVitreous china wash basin , white , flat back, size 580 x 450 mm, excluding taps waste ,chain and plug and porcelain stopper but incluing brackets, waste pipe and PVC waste coupling and pinning in ends of brackets or errecting stand, complete all as specified and as directed. |
| 75 | S&F in repairs PTMT waste pipe 32 mm bore of length up to 80 cm for WHB / sink/unrinal pots, complete all as specified and directed. |
| 76 | S&F in repairs PVC connections 15mm size of PTMT of 600mm long. complete all as specified and directed. |
| 77 | S & F in repair fancy type angle stop cock, 15 mm dia, cast copper alloy, with chromium plated, quarter turn screwed down , high pressure, with capstan head, screwed both ends for iron pipe or for unions and fixed, complete all as specified and as directed. |
| 78 | Repair leakage of 15 mm bore CP bib tap/ Pillar tap/ stop cock by replacing of necessary brass spindles as required complete all as specified and directed. |
| 79 | S&F in repairCP Showerrosewith arms125 mm dia with sizecomplete all as specified and as directed |
| 80 | S&F in repairs brass cromium plated tubular towel rail, 20mm dia, D type, 60cm long between flanges, fixed with rawl plugs complete all as specified and as directed. |
| 81 | Supply & fixin repairsheet glass shelf assembly consisting of 5.5 mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long all as specified & as directed. Make- Plumber/ Jaquar/Cera or requivalent as approved by GE. |
| 82 | S&F in repair glass corner self assembly, fancy type,made of 7-8mm thick sheet toughened glass of size 300x150mm,fixed with CP brackets,complete,all as specified and directed. |
| 83 | S&F in repairhigh quality plastic bathroom cabinet of size 550 x 342 x 125mmconsisting front looking mirror and four to five inner compartments fixed with and including chromium plated brass screws and wooden/plastic cleats, desinge and pattern approved by GE complete all as specified and directed |
| 84 | S&F in repairs 600 x 450 mm beveled edge mirror of selected quality glass mounted on 6 mm thick commercial plywood and fixed to wooden plugs with C.P. brass screws and cup washers complete all as specified and directed. |
| 85 | S&F in repair chromium plated hand shower with flexible pipe not less than 1 Meter suitable for 15 mm bore fittings complete all as specified and directed. |
| 86 | S&F in repair 125mm chromium plated central hole grating dome with waste hole complete all as specified and directed. |
| 87 | S&F in repair CP soap dish with glass Finish (Glossy) complete all as specified and directed. |
| 88 | S&F in repair fancy type brass chromium plated wall mixer with and including Telephonic shower arrangements & with pipe bend 3-in-1 screwed down with connection to overhead and hand shower suitable for 15 mm bore GI pipeQuarter turn with water saving nozzle complete all as specified and directed. |
| 89 | S&F in repair fancy type brass chromium plated wall mixer 2-in-1 with wall flanges Connecting legs and bend screwed down suitable for 15 mm bore GI pipeQuarter turn with water saving nozzle complete all as specified and directed. |
| 90 | S&F in repairs of fancy typesink mixer brass chromium plated screwed down 15mm bore Quarter turn with water saving nozzle complete all as specified & as drected. |
| 91 | S&F in repairs of fancy typeCentre hole basin mixer brass chromium plated screwed down 15mm bore Quarter turn with water saving nozzle complete all as specified and as directed. |
| 92 | Repair leakage of 15 mm bore CP Wall Mixer/WHB Mixer/Sink Mixer by replacing of necessary brass spindles as required complete all as specified and directed. |
| 93 | S & F in repair Gun-metal, globe or gate valve, 20 mm dia, with iron wheel head, screwed both ends for iron pipe and fixed, complete all as specified and as directed. |
| 94 | M&L for cleaning of overhead tank of any description and in position, removing all scale and dirt by detergent/detergent powder and finally disinfected with bleach wash etc from tanks and mouths of circulating pipes etc and writing the date of cleaning and the due date of cleaning, capacity of tanks exc. 250 litres and not exc. 500 litres complete all as specified and as directed. |
| 95 | All as per item 92 but exc 500 & n.exc. 1000 ltrs capacity,complete all as specified and as directed. |
| 96 | S&F in repairs rotational moulded polythene water storage tank of capacity 500 liters (Cylindrical /vertical with close top) triple layer construction fixed in position incld dismantling of old PVC tanks complete all as specified and directed. |
| 97 | S&F in repairs rotational moulded polythene water storage tank of capacity 1000 liters (Cylindrical /vertical with close top) triple layer construction fixed in position incld dismantling of old PVC tanks complete all as specified and directed. |
| 98 | S&F in repair ball/ float valves high pressure of PTMT with epoxy coated aluminum rod & high density plastic ball screwed for iron pipe and fixed 20mm bore pipe minimum weight 210 gms complete all as specified and as directed. |
| 99 | S&F fxedin repairstank covers(with locking arrangements as per existing one) of water storage tank for capacity 500 ltrs to 1000 ltrs complete all as specified & directed. |
| 100 | S&Fixed in repair ofSS powder coated peg sets of 6 Nos peg set of good quality, complete all as specified and directed. |
| 101 | S&F in repair 18mm thick solid PVC board of 1st quality of one side prelaminated of approved colour and one side white colour fixed with screwes, solvent cement/ adhesive to make kitchen cabinate and cup board shutters including dismantling boarding any description complete all as specified and directed. |
| 102 | S & F in repair 12mm thickPVC boardof grade 1 quality of both side plain white colour fixed with screws, solvent cement/adhesive to make kitchen cabinet sides top and bottom, shelves inside the cabinet and shutter or drawer any type or specification complete all as specified and directed. Make: Rajshree/navratan/kumar archor equivalent as approved by GE. |
| 103 | S & F continuous (Piano) hinges ,stainless steel, bright finished or electrogalvanised, width of flap 30 mm (when open), complete all as specified and directed. |
| 104 | S&F soft closing hinges O \"Dgree\" heavy duty 304 Grade high grade mild steel, bright finish or electrogalvanised as per approvedsample for kitchen cupboard shutters complete all as specified and directed. |
| 105 | S&F in repairs soft closing hinges O \"Dgree\" heavy duty 304 Grade high grade mild steel, bright finish or electrogalvanised as per approvedsample for kitchen cupboard shutters complete all as specified and directed. |
| 106 | S&F in repairs Magnet catchfor kitchen cabinet shutters as per approvedsample complete all as specified and directed. |
| 107 | S&F in repairs stainless steel drawer telescopic channel of size 500mm long of load bearing capacity 35 Kg complete all as specified and directed |
| 108 | Supplyandfixing in repairStainless Steel (SS-204) plate/cutlery/Large utensil/Cup&saucer/Tali basket of size as per site requirement of approved sample complete all as spd and directed. |
| 109 | S&F in repair 100mm long fancy SS handle for cupboard & wardrobe shutter complete all as specified and as directed by Engr-in-charge |
| 110 | S&F in repair sinks with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and waste; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe( overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm), complete all as specified and directed. |
| 111 | S&F in repairs kitchen plate rack of stainless steel of size 720 x 600 x 230mm made out of 1mm thick stainless steel sheet all as specified and directed |
| 112 | S&F 125 mm size stainless steel, Hasp and staple, safety type, steel hinge pin including bolt to hinge plate and fixed with screws, complete all as specified and directed. |
| 113 | M&L for removing/cutting trees, vegetation, digging out roots from concrete or brick wall filling holes on building (block of 8/16 qtrs) wall/roof/chajja/water tank staging area etc in PCC 1:2:4 type B-1 and making good with CM 1:4 complete all as specified & directed. |
| 114 | Material & Labour for providing and fixing stainless steel (Grade 304) grill/railing made of hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of floor or the side of waist slab or window jambs with suitable arrangement. |
| 115 | M&L for Preparing old decorated plastered or unplastered surfaces of external walls and applying one coats exterior weather proof Paintby the use of rollers including filling cracks/depressions with putty to make the adjacent surface even and smooth complete all as specified and directed. |
