|
| 1 | Excatation in river bed/bank or side of river to digging of boulder stone, earth with the help of earth moving maching like JCB for making a un lined channel having length exc 400 mtrs butnot more than 500 meter, width equal to 2.0 mtr approx and depth should be 2.30 mtr including arranging stones/boulders in bunds fashions etcThe slope of this channel should be from upstream river to towards MES pump house stage I at Markanda at times ,So that surfaceriver watershall colected in RCC chamber, the work should be executed as perthe direction of Engineer-in-Charge as and when requiredand should completed with in stipuated time limit (Not more than 12 hrs) in all respect.NOTE : The quoted rates are including of men, material, machinery and CPany other expenditure occuredby contractor. |
| 2 | M&L for Cleaning of Mild steel tank ( Stage II Pump House) of capacity 10000 gallons staged on more than 10 metre height staging after draining out the water from the tank including complete removal of silt, sludge, fungus, dirt deposited on the internal surfaces of tank by scrapping with wire brush and removing vegetation if any,incl removal of debris/sludge to a distanceexc 250 mtrs but n.exc 500 mtrs,washing internal surfaces including ceiling with clean water mixed with bleaching powder twice in inner surface,day after applying two coats of synthetic enamel paint (colour will be decided by Engr-in-Charge) over one coat of red oxide zinc chrome primer of inner and oute side of the Mild steel OHT tankafter complete removal of existing paint , corrosion etc including removing of existing unserviceable corroded steel angle sectionby applying two coats of synthetic enamel paint over a coat of red oxide complete inner and out side of the MS angle section etc including writing, cleaning date/due date for cleaning with white enamel paint on black colour surfacecomplete all as specified and as directed by Engineer-in-charge.Note:- The replaced steel member will be measured and paid for separately in respective items. |
| 3 | M&L for Cleaning of RCC over head reservoir (Near Stage III filteration plant) of capacity 100000 gallons and 6 mtr depthstaged on more than 18 metre height staging after draining out the water from the tank including complete removal of silt, sludge, fungus, dirt deposited on the internal surfaces of tank by scrapping with wire brush and removing vegetation if any,incl removal of debris/sludge to a distanceexc 250 mtrs but n.exc 500 mtrs, washing internal surfaces including ceiling with clean water mixed with bleaching powder twice in inner surface, and applying two coats of cement base paint to internal surface including ceilings & wall complete etc including writing, cleaning date/due date for cleaning with white enamel paint on black colour surface including applying one coat of exterior emulsion weather proof paintover a coat of primer forcomplete outside of the over head tank and applying two coats of synthetic enamel paint (black) over one coat of red oxide zinc chrome primer including removing of existing unserviceable corroded stairsfor completesteps ( MS angle section) incl S& F in replacement of Aviation obstruction lightcomplete all as specified and as directed by Engineer-in-charge..Note:- The replaced steel member will be measured and paid for separately in respective items. |
| 4 | Dismantling and Taking out existing unserviceable MS Header and M & L for MS header of size 250 mm dia made out of MS pipe 250 mm dia heavy duty having a length of 8 to 9 mtrwith 4 Nos flanged tee of size 250x250x150mm, including necessary welding work for fixing of existing water supply main line of size 150 mm dia, 3 Nos and 2 Nos 150 mm dia distribution lines on either side of the MS header using suitable size MS reducer including making good on disturbed surfaces by applying two coats of synthetic enamel paint over a coat of red oxide primer complete as directed by Engineer-in-Charge |
| 5 | Dewatering / de-silting including cleaning with wire brushes bottom and side walls to the extent surfaces is clearly visible and all deposits etc removed includingM&L for one coat of thick cement wash with cement slurry @ 3 Kgs/Sqm to achieve the finish withdistempering brush for under- ground reservoir of capacity 30000 Gallons and 3.5 mtrs deep at Stage-II and removal of sludge/silt to a distanceexc 250 mtrs but n.exc 500 mtrs and depositing where directed complete all as specified and directed by Engineer-in-Charge.Note : The rates areinclusive ofmionor B/R repair of side wall/botom or top surface of tank and cleaning with bleaching powder as well,contractoralso needs to put the date of each cleaning and next sch date of clean of tank with visible paint at location complete all spcified and directed. |
| 6 | Dewatering / de-silting including cleaning with wire brushes bottom and side walls to the extent surfaces is clearly visible and all deposits etc removed includingM&L for one coat of thick cement wash with cement slurry @ 3 Kgs/Sqm to achieve the finish withdistempering brush for L shape under- ground filtration tank of capacity 10000 Gallons and 2.5 mtrs deep at Stage-II and removal of sludge/silt to a distance exc 250 mtrs but n.exc 500 mtrs and depositing where directed complete all as specified and directed by Engineer-in-Charge.Note : The rates areinclusive ofmionor B/R repair of side wall/botom or top surface of tank and cleaning withbleaching powder as well,contractoralso needs to put the date of each cleaning and next sch date of clean of tank with visible paint at location complete all spcified and directed. |
| 7 | Dewatering / de-silting including cleaning with wire brushes bottom and side walls to the extent surfaces is clearly visible and all deposits etc removed includingM&L for one coat of thick cement wash with cement slurry @ 3 Kgs/Sqm to achieve the finish withdistempering brush for L shape under- ground reservoirof capacity 2x50000 Gallons and 3.5 mtrs deep at Stage-III and removal of sludge/silt to a distance exc 250 mtrs but n.exc 500 mtrs and depositing where directed complete all as specified and directed by Engineer-in-Charge.Note : The rates areinclusive ofmionor B/R repair of side wall/botom or top surface of tank and cleaning withbleaching powder as well,contractoralso needs to put the date of each cleaning and next sch date of clean of tank with visible paint at location complete all spcified and directed. |
| 8 | Dewatering / desilting including cleaning with wire brushes bottom & side wall of the extent surface is clearly visible etc removed incl M&L for one coat of thick cement wash with cement slurry @ 3kg/Sqm to achieve the finish with distemperingfor sedimentation tank of 8 metre x 7 metre x 6 metre including channels and painting of steel channels( Steel angle section) / other member with one coat of red oxide and two coat of black bitumenous paint (at Stage-II)includingremoval of sludge/silt to a distanceexc 250 mtrs but n.exc 500 mtrs and depositing where directed Complete all as specified and as directed . |
| 9 | Cleaning of stage I, II & IIIincluding clearing of all debries, pipe scaling, plant tree leaves,trimming of branches over on LT line and other material from water supply installation and deposit beyond Mod land & Cleaning of above ground water tank.T&P will be provided by the contractor which is included in this quoted rate. |
| 10 | Dewatering / de-silting including cleaning with wire brushes bottom and side walls to the extent surfaces is clearly visible and all deposits etc removed includingM&L for one coat of thick cement wash with cement slurry @ 3 Kgs/Sqm to achieve the finish withdistempering brush for under- ground reservoir of capacity 20000 Gallons at Stage-I and removal of sludge/silt to a distance exc 250 mtrs but n.exc 500 mtrs and depositing where directed complete all as specified and directed.Note :The rates areinclusive ofmionor B/R repair of side wall/botom or top surface of tank and cleaning withbleaching powder as well,contractoralso needs to put the date of each cleaning and next sch date of clean of tank with visible paint at location complete all spcified and directed. |
| 11 | S&F as in repairbrass spindle, with spindle nutsbrass ring, nuts gland packing and its suitable for connectingproperly in base plateetc of existing sluice valvesof 250/200 mm bore complete all as specified and as directed |
| 12 | All as per item No 11 of above but 150 mm bore sluice valve |
| 13 | All as per item No 11 of above but 100 mm bore sluice valve |
| 14 | All as per item No 11 of above but 80 mm bore sluice valve |
| 15 | Disconnecting and removing from existing foundation motor at Stage -I,100 HP, 3 phase, 50 Hz including pump setfrom site to work shop and vice versaopening the motor, cutting and removing the burnt winding and cleaning of slots and rewinding with the super enamel copper wire (as per existing no of turns) with suitable sizeincluding replacement of terminal plate connecting and refixing at existing foundation including testing complete after repairall as specified and directed .Note:- The cost of loading, unloading including transportation for carrying of this item from Pump House to workshop and back shall to be included in the unit rate of this item. |
| 16 | All as per Item No. 15above but Submersible pumping set(Stage-I & II)/Monobloc Pumping set (Swimming Pool) of capacity 5 to 15 HP. |
| 17 | Taking up or down old unserviceable corroded existing 20/25 mm bore steel water tubing & connections including all fittings and fixtures, laid in trenches or fixed along the walls or in any position, complete all as specified and as directed . |
| 18 | All as per item No 17 here-in-before but 40 mm bore. |
| 19 | All as peritem No 17 here-in-before but 50 mm bore. |
| 20 | All as peritem No 17 here-in-before but 80 mm bore. |
| 21 | All as peritem No 17 here-in-before but 100 mm bore. |
| 22 | All as peritem No 17 here-in-before but 150 mm bore. |
| 23 | Supply, laying, connecting & testing of 20/25 mm bore steel water tubing galvanized medium grade, with all fittings & fixtures (ISI marked) laid in trenches or fixed along walls or in any position complete all as specified and as directed . |
| 24 | All as per item No 23 but bore 40 mm. |
| 25 | All as per item No 23but bore 50 mm. |
| 26 | All as per item No 23 but bore 80 mm |
| 27 | All as per item No 23but bore 100 mm |
| 28 | Supply, laying, jointingand testing of MS ERW pipe line medium grade 150 mm dia (ISI marked)both endflanged with andincluding MS flange 20 to 25 mm thick consisiting12 holeswith 12 Nos bolts and nuts, washer and compressed fiber board 3 mm thick rubber sheet andall MS fitingsincluding taking out existing unserviceble pipe line with burning out joints and recovering leadcomplete all as specified and asdirected .Note for item No 23 to 28 :- Excavation and earth work shall be measured and paid seperately under respective item of this schedule. |
| 29 | Excavation in trenches n exc 1.5 mtr wide and n exc 1.5 meter in depth and forming bottom surfaces to the required gradient and slope forlaying of cable, pole etc and getting out in soft/loose soil complete all as specified and directed by Engr-in-Charge. |
| 30 | Returning, filling, in including spreading, levelling, watering and well ramming excavated soilin layers not exceeding 25 cm thick each, back in trenches after cables have been laid and tested, all as specified. |
| 31 | Removing excavated surplus (soil)to a distance not exceeding 50 metre and depositing where directed at a level not exceeding 1.5 metre above the starting point complete, all as specified. |
| 32 | M&L for jointing and testing CI fiting such as bend any type, any radius and angle, tapers any type (straight, bends for pieces increasing/decreasing or double socket, dead flange any size etc) tee pieces, single branch Y junction, double branch, cross, collars,caps and plugs upto 150mm bore pipe with spigot and socket ends Incl lead joints complete all as spcified and directed. (Note: Excavation & earth work shall be measured and paid separately) |
| 33 | Supply, fixing & testing sluice valve PN-1 (ISI marked ) confirming to IS-14846-2000 with brass spindle,and fly nut flanged both ends & drilled for jointing, wheel head type including two flanged joints with nuts, bolts, washers & rubber insertion packing etc for 250/200 mm bore pipe as in repair complete including taking out unserviceable sluice valve 250/200 mm borefrom pipeline and removing from sitecomplete all as specified and directed. |
| 34 | All as per item No. 33 above but 150 mm bore |
| 35 | All as per item No. 33 above but 100 mm bore |
| 36 | All as per item No. 33 above but 80 mm bore |
| 37 | Supply , Installing ,testing and commissioning, LT Panel Suitable of Indoor type self-standing front operated factory made IP65 of suitable size dust & vermin proof, (Approved by CPRI) totally enclosed made out of 3.00 mm thick MS sheetand inner comparments of 2.00mm thick steel sheetenclosure with double door shutter with locking arrangement and angle ironlegsmade out of 50mmx50mmx 6 mm thick MS anglemounted on plateform suitable for operation on 3 phase,4 wire ,440volts, AC supply system with hinged panel door(covers) on two sides with handle,bottom gland plate and locking arrangement consisting of sufficient no\"s of circular cable entry holes at bottom only with suitable PVC/Rubber bushes to prevent water/moisture inside the enclosure ,required no\"s of holes to be fixed with chromium plated brass cable glands for cable entry and exit complete with necessary internal wiring with strandard copper conductor FRLS wires of adequate size,duly powder coated internally & externally of approved shade with PCC foundation mounted on epoxy insulators with and constitute the following - (a) Incoming MCCB 400A 4P 36KA Thermal Adjustable & Magnetic Fixed - 1No.(b) Copper Bus Bar 600A TPN (c) Dig. Multifunction Meter (VAF+PF) WITH CT’s& led I/Lamp RYB -1 Set(d) Outgoing MCCB 250A 3P 25KA Adjustable Thermal &Fixed Magnetic. -3Nos.(e) Outgoing MCCB 200A 3P 25KA Adjustable Thermal &Fixed Magnetic. -1No.(f) O/G MCCB 100A 3P 25KA TM , Heavy Duty Capacitor 50KVAR, Capacitor Duty Contactor suitable for 50KVAR, A/M Selector, On-Off Push Button & On Indicating Lamp -1Set.(g) O/G MCB 63A 3P, Heavy Duty Capacitor 25KVAR, Capacitor Duty Contactor suitable for 25KVAR, A/M Selector, On-Off Push Button & On Indicating Lamp -1Set.(h) O/G MCB 32A 3P, Heavy Duty Capacitor 12.5KVAR, Capacitor Duty Contactor suitable for 12.5KVAR, A/M Selector, On-Off Push Button & On Indicating Lamp -2Sets. (i) APFC Relay 4 Step-1No. |
| 38 | S&Fin replacement of 150 mm dia bore MS foot valve MS flanged as per IS codestandard internals leather/rubber washer,boltincluding necessary gasket complete all as specified and directed. |
| 39 | All as per item ser No 38 but of size 100mm dia bore |
| 40 | M&L forBrick masonry valve pit of size 90cm x 90 cm x 105cm internal dimension of chamber including plastering internally and flush pointing externally in cement mortar 1:4 complete with MS sheetcover 3 mm thick with handle and locking arrangement over and including 40 x 40 x 6mm thick angle iron frame including earth work and applying two coats of synthetic enamel paint over a coat of red oxide primer complete in and outer side of the MS sheet cover and angle iron frame complete all specified and asdirected. |
| 41 | All as per ser No 40 above but of size 105 x 105 x 110 cm. |
| 42 | M&L forjointing of150mm bore MS flanged pipes with 25mm thick (as in repair) M.S flange having 8 to 12 holes and including 3mm thick rubber gasket (packing) incluing provision of suitable size ofNuts bolts and double washer for each point and necessary welding work to arrest water leakagecomplete all as specified and as directed |
| 43 | Taking out unserviceable Air release valve of 50 mm bore with all fitting andS&F air release valve of size 50 mm complete with air outlets fixed with nuts bolts and packing material for CI/MS water mains of 50 mm bore flanged pipe complete all as specified and as directed |
| 44 | Taking out unserviceable Air release valve of 100 mm bore with all fitting andS&F air release valve of size 100 mm complete with air outlets fixed with nuts bolts and packing material for CI/MS water mains of 100 mm bore flanged pipe complete all as specified and as directed |
| 45 | All as per Sl Item No. 44 but 80mm bore |
| 46 | S&F gun metal gate or globe valves heavy duty yoke type, full way openig with iron wheel head screwed with both end of GI tubing 50 mm bore ISI marked including taking down of unserviceable gate or globe valve all as specified and directed. |
| 47 | All as per Sl Item No. 46 but tubing 40 mm bore |
| 48 | All as per Sl Item No. 46 but tubing 25 mm bore |
| 49 | All as per Sl Item No. 46 but tubing 20 mm bore |
| 50 | All as per Sl Item No. 46 but tubing 15 mm bore |
| 51 | S&F as in repaircast steel body reflux valve (non return valve) with by pass arrangement having dia 150 mm heavy duty class 300 all as specified in repair. |
| 52 | Dismantling and Taking down unserviceable sleeve and M&L for new Stainless steel sleeve suitable for 100 HP Pumpset including all necessary fixing accessories complete all as specified and directed |
| 53 | M&L for Packing Glands of size 19 mm complete all as specifed and directed |
| 54 | M&L for Packing Glands of size 12 mm complete all as specifed and directed |
| 55 | M&L for Packing Glands of size 10 mm complete all as specifed and directed |
| 56 | M&L for Packing leather sheet 4 mm thick complete all as specifed and directed |
| 57 | M&L for lose rubber bagsuitable for Avon bleaching powder dozer 110 ltrs cap complete all as specified and directed by Engr-in-Charge |
| 58 | M&L for coupling bush suitable for 100 HP Centrifugal pump/Squirrel cage motor complete all as specified and directed. |
| 59 | M&L in replacementof clamps, nuts,bolts and washers as per site requirement for connection of CI/MS pipe of size upto 150 mm bore complete all as directed. |
| 60 | M&L for existing old painted surface upto 250mm of MS/GI pipe of suction,delivery,Sluice valve,Non return valve, header ,flange ,channels, angle incl 100 HP centrifugal /squirrel cage induction motor with pumpetc by brooming down with steel wire brushing .scraping down the corroded MS/GI pipe and applying new painting as per existingcolour with written a letter suction,delivery line incl direction of flow (arrow mark) with two coat of synthetic enamel paint over a coat of red oxide for Stage-I & II complete all as directed. |
| 61 | Supply and replacing Rubber Star Coupling suitable for up to 100 HP Pumpset , including taking down of existing couplers complete all as directed. |
| 62 | Material and labour for cement concrete in foundations or pipe support or coping or any other worktype B21:2:4 with 40 mm graded crushed stone aggregate all as directed |
| 63 | Supply and fix voltmeter digital type 0- 500 volts including taking down unserviceable volt meter all as directed. |
| 64 | Supply and fix Ammeterdigital type 0- 200 Amps with necessary CTs 3 nos of range 100/5 including taking down unserviceable Ammeter all as directed |
| 65 | S&F in replacement of water pressure gauge upto pressure 1000kg/cm3 for measuring water pressurecomplete all as specified and directed. |
| 66 | S&F in replacement of100/150 mm dia bore PVC foot valve with flanged as per IS codestandard internals leather/rubber washer,boltincluding necessary gasket complete all as specified and directed. |
| 67 | M&L for preparation & Painting new steel surfaces with two coats of synthetic enamel paint over a coat of red oxide primers for surfaces exc 10 cm width or grith complete all as specified and directed. |
| 68 | M&L in replacement ofcartridge(5484) filter for cleaningof swimming Pool floor complete al as directed. |
| 69 | Supply, installing, commissionig of 3/5 HP three phase DOL submersible pump panel size 220mmx140mmx120mm, pickup voltage minimum 70% of coil rating, opretional voltage: 280-440 Volt, ambienttemprature -25 degree celcius to +55 degree celcius, relay, current rating: 9-14Amps complete all as specified and directed. |
| 70 | M&L Earthing complete as per electrical plate No 5 of MES SSR Part I with galvanised steel plate earth electrode 60 cm x 60 cm x 6.0 mm, burried directly vertically in ground in a pit of depth not less than 2.5 metres below ground level with the top edge of earth plate at a depth not less than 1.5 m below normal ground level connected to and including galvanised iron or steel earth strip 32 x 6 mmby means of bolts, nuts, check nuts and washers of galvanised iron or steel. Earthing strip protected by galvanised iron or steel pipe 50 mm bore medium grade and connected to continuous earth wire on pole/ test point.Watering pipe shall be 20mm bore GI medium grade. The earthing shall be inclusive ofexcavation and earth work in any type of soil, charcoal, salt, funnel , PCC pit and RCC cover complete all as specified & directed by Engr-in-Charge.Note 1- following items deemed to be included in quoted rate (a) Earth electrode. (b) Main earthing lead from earth electrode to test point and further to equipment to be earthed upto 7.5 metre. (c) Material and labourfor connecting earth electrode and earthing lead as specified. (d) Adequate quantity of charcoal, dust, common salt and ground enhacement material as required to bring the earthing resistance as per direction. (e) All labour involved including testing of earth net work. (f) Excavation and earth work or drilling hole for electrode. (g) P.C.C. pit and C.I. cover. (h) Funnel with watering pipe, wire mesh and copper lugs etc. as specified. (j) G.I. protection pipe of size ordered specified for protection of earthing lead from mechanical injury or tempering. Note 2 - On testing after completion if the desired earth resistance is not obtained the earthing will be redone at no extra cost. |
| 71 | Supply and fixing Ant Pump 230v, 50Hz, model No ED042004 capacity 0-20 LPH, Pressure 4 Kg/cm2 complete all as specified and directed. |
| 72 | Supply and laying Rubber insulated mats 2.5mm thick for voltage upto 11 KV for electrical purpose suitable for electrical shock safety of size 2metre x 1metre complete all as specified and directed. |
| 73 | Note: For the purpose of arriving at lumpsum amount, the amount of credit schedule i.e Sch \"A\" section II (i.e Rs 67,139.00 shall be deducted from the total amount arrived. |
| 74 | Total of Schedule \"A\" Rs. |
