Tender For Repair To Wooden Furniture And Misc Furniture And Polishing Etc At A A Banar Under Ge Banar, Jodhpur-Rajasthan

TDR : 53112319

Tender Notice
BOQ

13 Days Left

Jodhpur , Rajasthan

Tender Brief : Tender For Repair To Wooden Furniture And Misc Furniture And Polishing Etc At A A Banar Under Ge Banar

Document Fees
₹ 500 /-

EMD
₹ 59732.0 /-

Tender Value
₹ 29.86 Lakhs /-

Submission Date
07-01-2026

Competition Type
Indian

Bidding Type
Tender

Need a Business Loan? Apply Now !


1	Chair Dining : FD-228 & 279
2	Rear LegsTaking down old u/s Rear Leg and M&L for New leg made out of teak wood duly polished to match the existing Chair all as specified in drg and as directed by Engr-in-Charge.
3	Front LegsTaking down old u/s Front Leg and M&L for New leg made out of teak wood duly polished to match the existing Chairall as specified in drg and as directed by Engr-in-Charge.
4	Side RailTaking down old u/s Side Rail and M&L for New Side Railmade out of teak wood duly polished to match the existing Chair all as specified in drg and as directed by Engr-in-Charge.
5	Front or BackRail Taking down old u/s Front or Back Railand M&L for New Front or Back Railmade out of teak woodduly polished to match the existing Chair all as specified in drg and as directed by Engr-in-Charge.
6	Bottom StiffenerTaking down old u/s Bottom Stiffener and M&L for New Bottom Stiffenermade out of teak wood duly polished to match the existing Chair all as specified in drg and as directed by Engr-in-Charge.
7	Back StripTaking down old u/s Back Strip and M&L for New leg made out of teak wood duly polished to match the existing Chair all as specified in drg and as directed by Engr-in-Charge.
8	Bracket : S&F new bracket triangular shapewith 02 Nos steel screws suitable size bracket made out of teak wood duly polished to match the existing Chair size 75 mm x 75 mm x 25 mm complete all as shown on drawing and as directed by Engr-in-Charge.
9	Shoes: M & L for removing old/worn out rubber shoes with S & F new Rubber/PVC shoe of superior quality with steel plated screws of suitable size complete all as directed byEngr - in - Charge
10	Re-canningRe- canning of Chair Dining in Godrej pattern with oval shape 2 mm wide new white plastic cane and 3mm wide at the edge make as approved by GE including taking out old canning complete. Restall as shown on drawing and as directed by the Engr - in - Charge.
11	Chair Writing : FD-202, 250 & 280
12	Rear LegsTaking down old u/s Rear Leg and M&L for New leg made out of teak wood duly polished to match the existing Chair all as specified in drg and as directed by Engr-in-Charge.
13	Front LegsTaking down old u/s Front Leg and M&L for New leg made out of teak wood duly polished to match the existing Chairall as specified in drg and as directed by Engr-in-Charge.
14	Side RailTaking down old u/s Side Rail and M&L for New Side Railmade out of teak woodduly polished to match the existing Chair all as specified in drg and as directed by Engr-in-Charge.
15	Front or BackRail Taking down old u/s Front or Back Railand M&L for New Front or Back Railmade out of teak woodduly polished to match the existing Chair all as specified in drg and as directed by E-in-C
16	Bottom StiffenerTaking down old u/s Bottom Stiffener and M&L for New Bottom Stiffenermade out of teak wood duly polished to match the existing Chair all as specified in drg and as directed by Engr-in-Charge.
17	Back StripTaking down old u/s Back Strip and M&L for New back strip made out of teak wood duly polished to match the existing Chair all as specified in drg and as directed by Engr-in-Charge.
18	Bracket : S&F new bracket triangular shapewith 02 Nos steel screws suitable size bracket made out of II class hard wood duly polished to match the existing Chair Make : Bonsom/Tita champa size 75 mm x 75 mm x 25 mm complete all as shown on drawing and as directed by Engr-in-Charge.
19	Shoes: M & L for removing old/worn out rubber shoes with S & F new Rubber/PVC shoe of superior quality with steel plated screws of suitable size complete all as directed byEngr - in - Charge
20	Re-canningRe- canning of Chair Writing in Godrej pattern with oval shape 2 mm wide new white plastic cane and 3mm wide at the edge make as approved by GE including taking out old canning complete. Restall as shown on drawing and as directed by the Engr - in - Charge.
21	Arms Rest: Taking down old u/s Arms Rest and M&L for New Arms Rest made out of teak wood duly polished to match the existing Chair all as specified in drg and as directed by Engr-in-Charge.
22	Chair Easy : FD-229 & 201
23	Rear Legs :Taking down old u/s Rear Leg and M&L for New leg made out of teak wood duly polished to match the existing Chair all as specified in drg and as directed by Engr-in-Charge.
24	Front Legs: Taking down old u/s Front Leg and M&L for New leg made out of teak wood duly polished to match the existing Chairall as specified in drg and as directed by Engr-in-Charge.
25	Side Rails of Seat:Taking down old u/s Side Rails of Seat and M&L for New Side Railmade out of teak woodduly polished to match the existing Chair all as specified in drg and as directed by Engr-in-Charge.
26	Front/ Back Rails of seat : Taking down old u/s Front Rail of Seatand M&L for New Front Railmade out of teak woodduly polished to match the existing Chair all as specified in drg and as directed by Engr-in-Charge.
27	Side Rail Back:Taking down old u/s Side Rail of Backand M&L for New side rail made out of teak wood duly polished to match the existing Chair all as specified in drg and as directed by Engr-in-Charge.
28	Top/Bottom Rail of Back:Taking down old u/s Top/Bottom of Backand M&L for New leg made out of teak wood duly polished to match the existing Chair all as specified in drg and as directed by Engr-in-Charge.
29	Front Support Rail :Taking down old u/s Front Support Railand M&L for New Rail made out of teak wood duly polished to match the existing Chair all as specified in drg and as directed by Engr-in-Charge.
30	Shoes :-M & L for removing old/worn out rubber shoes with S & F new Rubber/PVC shoe of superior quality with steel plated screws of suitable size complete all as directed byEngr - in - Charge
31	Bracket : S&F new bracket triangular shapewith 02 Nos steel screws suitable size bracket made out of II class hard wood duly polished to match the existing Chair Make : Bonsom/Tita champa size 75 mm x 75 mm x 25 mm complete all as shown on drawing and as directed by Engr-in-Charge.
32	Re-canningRe- canning of Chair Easyin Godrej pattern with oval shape 2 mm wide new white plastic cane and 3mm wide at the edge make as approved by GE including taking out old canning complete. Restall as shown on drawing and as directed by the Engr - in - Charge.
33	Arms Rest: Taking down old u/s Arms Rest and M&L for New Arms Rest made out of teak wood duly polished to match the existing Chair all as specified in drg and as directed by Engr-in-Charge.
34	Bed Hard/Bed Newar ; FD-246
35	TOP : M&Lshall be provided for replacement of worn out plywood top from Bed Hard/Bed Newar, S&F New Plywood top of12 mm thick commercial, BWR grade confirming to IS-303in one piece, fixed with suitable screws complete, all as specified on drg andas directed by Engr-in-Charge.
36	Long Rail : M &L for replacement of old broken long Rail made out of II nd class hard woodRest all as per drg.
37	Short Rail :Making of short Rail from old broken long rail (obtain from Item No 4.02 here-in-before) and fix rest all as per drg.
38	Legs : M &L for replacement of old broken legs made out of II nd class hard wood Make : TITACHAMPA/ HOLLOK/ BANSOM Rest all as per drg.
39	Head Board : M & L for taking out all broken worn out componentof head board and provide frame with IInd class hard wood and Teak face ply one side and other side commercial ply BWRgradeall as per drg.and as directed.
40	Foot Board :M & L for taking out all broken worn out componentof head board and provide frame with IInd class hard woodand Teak face ply one side and other side commercial ply BWRgradeall as per drg.and as directed.
41	Middle Stiffner :M & L for replacement of old broken stiffener connecting of legs with new one made out teak wood., Rest all as per Drg.
42	Steel bent clamp for corner :S &F MS clamp made outmild steel flat iron size 35 mm x 5 mm including2 coats of synthetic enemel paint over a coat of redoxide primer.
43	Side Board : FD-244, 15(M) & FD-212
44	Top : Taking down old u/s Topand M&L for New Top made out of 18/19mm Post FormingPrelaminated Post FormingMDF Board Exterior grade completeall as specified in drg and as directed by Engr-in-Charge.
45	Legs : Taking down old u/sLeg and M&L for New leg made out of teak wood all as specified in drg and as directed by Engr-in-Charge.
46	Long Rail :Taking down old u/s Long Rail and M&L for New Long Railmade out of teak wood all as specified in drg and as directed by Engr-in-Charge.
47	Short Rail :Taking down old u/s Short Railand M&L for New Short Railmade out of teak wood all as specified in drg and as directed by Engr-in-Charge.
48	Shutter:-M&L for removing old worn out shutter and supply and fixing new shutter made out of 18/19 mm Prelaminated Particle board exterior gradeduly edging 5 mm thick teak wood beading after removing old UNSV edging . Rest all as per drg .
49	Drawer: M&L for removing old worn out drawer from the table and new drawer made out of teak wood as specified in the drg and as directed by Engr in Charge .
50	Side LT/RTTaking down old u/s Side LT/RTand M&L for New Side LT/RT made out of 18/19mm Prelaminated MDF board Exterior gradecompleteall as specified in drg and as directed by Engr-in-Charge.
51	Back :-M&L for removing old worn out Back from the Side Boardand new Backmade out of 6mm Plywood commercial BWR grade. Rest all as specified in the drg and as directed by Engr in Charge .
52	Knob: M&L fortaking out old worn out knob from the drawer of the table and SF new knob of best quality approved by GE/Engr-in-Charge.Rest all as specified or as directed by Engr in Charge.
53	Bin Soiled Linen : FD-244, 15 (M) & FD-212
54	Top : M&L for removing old worn out top andnew top made out of 18/19 mm post forming prelaminatedMDF board exterior grade .Rest all as specified in drg and as directed by Engr-in-Charge.
55	Bottom :M & L for removing old worn out bottom from bins, S&Fnew Bottom made outof second class. Rest all as specified in drg and asdirected by Engr - in -Charge.
56	Back :M & L for removing old worn out back of the bins and new made outof 6 mm thick commercial plywood BWR Grade.Rest all as specified in drg and asdirected by Engr - in -Charge.
57	Side LT/RT Canning:- Side Canning of Binin Godrej pattern with oval shape 2 mm wide new white plastic cane and 3mm wide at the edge make as approved by GE including taking out old canning.Rest all as shown on drawing and as directed by the Eng - in - Charge.
58	Side LT/RT SS Wire Mesh :- M&L for fixing of Side LT/RT with Galvanized SS woven wire mesh 0.46mm niminal dia 16 Mesh wide aperture 1.18mm conforming to IS : 1568/1970including taking out old SS Wire Mesh.Rest all as shown on drawing and as directed by the Eng - in - Charge.
59	Hinge:- Taking down old u/s Hinges and M&L for New Hinges ISI Marked size 75mm complete.Restall as specified in drg and as directed by Engr-in-Charge
60	Stool Dressing CB/Cushioned : FD-27, 252, 287 & 374
61	Leg : Taking down old u/sLeg and M&L for New leg made out of teak wood complete all as specified.
62	Side Rail: Taking down old u/sSide Railand M&L for New leg made out of teak wood complete all as specified.
63	Stiffener :Taking down old u/sStiffener and M&L for New leg made out of teak wood complete all as specified.
64	Re-Canning :Side Canning of Stool Dressing in Godrej pattern with oval shape 2 mm wide new white plastic cane and 3mm wide at the edge make as approved by GE including taking out old canning.Rest all as shown on drawing and as directed by the Eng - in - Charge.
65	Cushion forSeat :Removing of existing U/S cushion seat of stool dressing cushionedandS & F new foam cushion 75 mm thick 32 density duly stiched with fine standard thread on one side as approved by GE/Engr-in-Charge.Rest all as specified in drg and as directed by Engr-in-Charge (Note : Rate of Tapestry cloth should not be less than Rs. 350.00 Per RM)
66	Table Dressing Ladies : FD-251
67	Mirror: Removing of old/worn out U/S mirror andM & L for fixing new mirror 5 mm thick mirror as per size shown on drg & directed .
68	Back ply of mirror:RemovingUNSV back from the mirror and S & F new back made out of 6 mm thick ply wood BWR grade. Rest all as specified in the drg and as directed by Engr in Charge.
69	Top :Removing UNSV top andS & F new top made out of 18 mm thick pre laminated MDF board exterior grade.Rest all as specified in the drg and as directed by Engr in Charge.
70	Bottom:Removing UNSV from the mirror and new Bootom made out of 18 mm thick pre laminated MDF board exterior grade.Rest all as specified in the drg and as directed by Engr in Charge.
71	Drawer: M&L for removing old worn out drawer from the table and new drawer made out of teak wood as specified in the drg and as directed by Engr in Charge .
72	Knob: M&L for removing unservicable knob from the table and S & F new CP knob 40mm to suit to the drawer.Rest all as specified in the drg and as directed by Engr in Charge.
73	Legs: M&L for removing unservicable Legs from the table and SF new Legsmade out of 2nd class H/W.Rest all as specified in the drg and as directed by Engr in Charge.
74	Glass sliding shutter with alluminium channel : M&L for removingUNSV Glass sliding shutter with aluminium channel from table and S&F new Glass shutter made out of 4mm thick glass plain with aluminium channel 20 mm width.Rest all as specified in the drg and as directed by Engr in Charge.
75	Tables Dressing Gents : FD-230/31
76	(a) Mirror:- Removing of old/worn out U/S mirror andM & L for fixing new mirror 5 mm thick mirror as per size shown on drg & directed .
77	(b)Back ply of mirror:RemovingUNSV back from the mirror and S & F new back made out of 6 mm thick ply wood BWR grade. Rest all as specified in the drg and as directed by Engr in Charge.
78	(c) Top :Removing UNSV top and new top made out of 18 mm thick pre laminated MDF board exterior grade.Rest all as specified in the drg and as directed by Engr in Charge.
79	(d)Bottom:Removing UNSV from the mirror and new Bootom made out of 18 mm thick pre laminated MDF board exterior grade.Rest all as specified in the drg and as directed by Engr in Charge.
80	(e)Drawer: M&L for removing old worn out drawer from the table and new drawer made out of teak wood as specified in the drg and as directed by Engr in Charge .
81	(f) Knob: M&L for removing unservicable knob from the table and S & F new CP knob 40mm to suit to the drawer.Rest all as specified in the drg and as directed by Engr in Charge.
82	Table Writing : FD-249, FD-275 & FD-33 (M)
83	Top :M& L for removing U/S top from the table and supply and fixing new top made out of 18/19 mm thick post forming prelaminated MDFboard exterior grade .All as per specfication in drg and directed by E-in-C
84	Legs :M& L for removing U/S legs from the table including supply and fixing new legs made out of2nd class HW complete. All as per specfication and directed by Engr in Charge.
85	Long Rail :M& L for removing U/Slong railfrom the table including supply and fixing new long rail made out of2nd class HW complete.All as per specfication and directed by Engr in Charge.
86	Short Rail : M& L for removing U/Sshort railfrom the table including supply and fixing new short rail made out of2nd class HW complete. All as per specfication and directed by Engr in Charge.
87	Central Stiffener : M& L for removing U/S stiffenerfrom the table including supply and fixing new stiffener made out of2nd class HW complete.All as per specfication and directed by Engr in Charge.
88	Drawer :Removing U/S old broken drawer and S & F new ,made out of teak wood well seasoned. All as shown on drawing , as specified and as directed by Engr-in-Charge.
89	Store Box (Back): Removing old u/s back side board and replace with 6mm thick (BWR) commercial ply.
90	Store Box (Side):Removing old u/sside and replace with 19mmthick blockboardteak veneerfinish(One side).
91	Small legs : - M& L for removing U/S legs from the table including supply and fixing new legs made out of2nd class HW complete. All as per specfication and directed by Engr in Charge.
92	Shutter :M& L for removing U/S shutterfrom the table and supply and fixing new shutter made out of 18/19 mm thick prelaminated particle board exterior grade duly edging with 5 mmteak wood beading all around the top complete. all as per specfication in drg and directed by Engr in Charge.
93	Shoes:M & L for removing old/worn out rubber shoes with S & F new rubber shoe of superior quanlity with steel plated screws of suitable size complete all as directed by Engr-in-Charge
94	Bracket : S&F new bracket triangular shapewith 02 Nos steel screws suitable size bracket made out of II class hard wood duly polished to match the existing Table Writing Make : Bonsom/Tita champa size 75 mm x 75 mm x 25 mm complete all as shown on drawing and as directed by Engr-in-Charge.
95	Teapoy : FD-34, FD-232 & FD-278, FD-382
96	(a)Top :M& L for removing U/S top from the table and supply and fixing new top made out of 18/19 mm thick post forming prelaminated MDF board exterior grade. All asspecfication in drg and directed by Engr in Charge
97	(b)Top of the Teapoy shall be made of 75mm wide and 25mm thick teak wood all around the corner and balance portion of top shall be covered by 8mm thick plain glass duly round the edges and fixed up on the groove of teak wood frame to match the surface.
98	(c)Long Rail : M&L for removing U/S long railS&F New Long Railmade out of well seasoned teak wood complete all as specified and directed by Engr in Charge
99	(d) Short Rail : M&L for removing U/S short railS&F New Short Railmade out of well seasoned teak wood complete all as specified and directed by Engr in Charge
100	(e)Stiffener :M&L for removing U/S Sstiffener S&F New Short Railmade out of well seasoned teak wood complete all as specified and directed by Engr in Charge
101	(f) Legs : M&L for removing U/S LegS&F New Legmade out of well seasoned teak wood complete all as specified and directed by Engr in Charge
102	(g) Shoes: M&L for taking outworn out/unserviceable shoes from legs S&F new shoes of hard PVC fo superior quality with steel screw to the legs of the item all asspecified and directed by Engr-in-Charge
103	(h) Bracket : S&F new bracket triangular shapewith 02 Nos steel screws suitable size bracket made out of II class hard wood duly polished to match the existing Teapoysize 75 mm x 75 mm x 25 mm complete all as shown on drawing and as directed by Engr-in-Charge.
104	Table Centre : FD-235 & FD-274
105	(a)Top :M& L for removing U/S top from the table and supply and fixing new top made out of 18/19 mm thick post forming prelaminated MDF board exterior grade .All asspecfication in drg and directed by Engr in Charge
106	(b)Top of the Table Centre shall be made of 100mm wide and 25mm thick teak wood all around the corner and balance portion of top shall be covered by 8mm thick plain glass duly round the edges and fixed up on the groove of teak wood frame to match the surface.
107	(c)Long Rail : M&L for removing U/S long railS&F New Long Railmade out of well seasoned teak wood complete all as specified and directed by Engr in Charge
108	(d) Short Rail : M&L for removing U/S short railS&F New Short Railmade out of well seasoned teak wood complete all as specified and directed by Engr in Charge
109	(e)Stiffener :M&L for removing U/S Sstiffener S&F New Short Railmade out of well seasoned teak wood complete all as specified and directed by Engr in Charge
110	(f) Legs : M&L for removing U/S LegS&F New Legmade out of well seasoned teak wood complete all as specified and directed by Engr in Charge
111	(g) Shoes: M&L for taking outworn out/unserviceable shoes from legs S&F new shoes of hard PVC fo superior quality with steel screw to the legs of the item all asspecified and directed by Engr-in-Charge
112	(h) Bracket : S&F new bracket triangular shapewith 02 Nos steel screws suitable size bracket made out of II class hard wood duly polished to match the existing Table Centre size 75 mm x 75 mm x 25 mm complete all as shown on drawing and as directed by Engr-in-Charge.
113	Peg Table : FD-226 & FD-384
114	(a)Top :M& L for removing U/S top from the table and supply and fixing new top made out of 18/19 mm thick post forming prelaminated MDF board exterior grade . All asspecfication in drg and directed by Engr in Charge
115	(b)Top of the Peg Table shall be made of 75mm wide and 25mm thick teak wood all around the corner and balance portion of top shall be covered by 8mm thick plain glass duly round the edges and fixed up on the groove of teak wood frame to match the surface.
116	(c)Long Rail : M&L for removing U/S long railS&F New Long Railmade out of well seasoned teak wood complete all as specified and directed by Engr in Charge
117	(d) Short Rail : M&L for removing U/S short railS&F New Short Railmade out of well seasoned teak wood complete all as specified and directed by Engr in Charge
118	(e)Stiffener :M&L for removing U/S Sstiffener S&F New Short Railmade out of well seasoned teak wood complete all as specified and directed by Engr in Charge
119	(f) Legs : M&L for removing U/S LegS&F New Legmade out of well seasoned teak wood complete all as specified and directed by Engr in Charge
120	(g) Shoes: M&L for taking outworn out/unserviceable shoes from legs S&F new shoes of hard PVC fo superior quality with steel screw to the legs of the item all asspecified and directed by Engr-in-Charge
121	(h) Bracket : S&F new bracket triangular shapewith 02 Nos steel screws suitable size bracket made out of II class hard wood duly polished to match the existing PegTablesize 75 mm x 75 mm x 25 mm complete all as shown on drawing and as directed by Engr-in-Charge.
122	Table dining 6 persons : FD-273 & FD-329
123	(a)Top :M& L for removing U/S top from the table and supply and fixing new top made out of 18/19 mm thick post forming prelaminated MDF board exterior grade. All asspecfication in drg and directed by Engr in Charge
124	(b)Long Rail : M&L for removing U/S long railS&F New Long Railmade out of well seasoned teak wood complete all as specified and directed by Engr in Charge
125	(c) Short Rail : M&L for removing U/S short railS&F New Short Railmade out of well seasoned teak wood complete all as specified and directed by Engr in Charge
126	(d) Legs : M&L for removing U/S LegS&F New Legmade out of well seasoned teak wood complete all as specified and directed by Engr in Charge
127	(f) Shoes: M&L for taking outworn out/unserviceable shoes from legs S&F new shoes of hard PVC fo superior quality with steel screw to the legs of the item all asspecified and directed by Engr-in-Charge
128	(g) Bracket : S&F new bracket triangular shapewith 02 Nos steel screws suitable size bracket made out of II class hard wood duly polished to match the existing Table Dining 6 Pers size 75 mm x 75 mm x 25 mm complete all as shown on drawing and as directed by Engr-in-Charge.
129	Table Dining 8 persons : FD-273 & FD-329
130	(a)Top :M& L for removing U/S top from the table and supply and fixing new top made out of 18/19 mm thick post forming prelaminated MDF board exterior grade . All asspecfication in drg and directed by Engr in Charge
131	(b)Long Rail : M&L for removing U/S long railS&F New Long Railmade out of well seasoned teak wood complete all as specified and directed by Engr in Charge
132	(c) Short Rail : M&L for removing U/S short railS&F New Short Railmade out of well seasoned teak wood complete all as specified and directed by Engr in Charge
133	(d) Legs : M&L for removing U/S LegS&F New Legmade out of well seasoned teak wood complete all as specified and directed by Engr in Charge
134	(e) Shoes: M&L for taking outworn out/unserviceable shoes from legs S&F new shoes of hard PVC fo superior quality with steel screw to the legs of the item all asspecified and directed by Engr-in-Charge
135	(g) Bracket : S&F new bracket triangular shapewith 02 Nos steel screws suitable size bracket made out of II class hard wood duly polished to match the existing Table Dining 8 Perssize 75 mm x 75 mm x 25 mm complete all as shown on drawing and as directed by Engr-in-Charge.
136	Table 3\"x2\" W/o Drawer : FD-231 & FD-284
137	(a)Top :M& L for removing U/S top from the table and supply and fixing new top made out of 18/19 mm thick post forming prelaminated MDF board exterior grade . All asspecfication in drg and directed by Engr in Charge
138	(b)Long Rail : M&L for removing U/S long railS&F New Long Railmade out of well seasoned teak wood complete all as specified and directed by Engr in Charge
139	(c) Short Rail : M&L for removing U/S short railS&F New Short Railmade out of well seasoned teak wood complete all as specified and directed by Engr in Charge
140	(d)Stiffener :M&L for removing U/S Sstiffener S&F New stiffnermade out of well seasoned teak wood complete all as specified and directed by Engr in Charge
141	(e) Legs : M&L for removing U/S LegS&F New Legmade out of well seasoned teak wood complete all as specified and directed by Engr in Charge
142	(f) Shoes: M&L for taking outworn out/unserviceable shoes from legs S&F new shoes of hard PVC fo superior quality with steel screw to the legs of the item all asspecified and directed by Engr-in-Charge
143	(g) Bracket : S&F new bracket triangular shapewith 02 Nos steel screws suitable size bracket made out of II class hard wood duly polished to match the existing Table 3\"x2\"size 75 mm x 75 mm x 25 mm complete all as shown on drawing and as directed by Engr-in-Charge.
144	Table 3\"x2\" Drawer : FD-231/223/283/284
145	(a)Top :M& L for removing U/S top from the table and supply and fixing new top made out of 18/19 mm thick post forming prelaminated MDF board exterior grade. All asspecfication in drg and directed by Engr in Charge
146	(b)Long Rail : M&L for removing U/S long railS&F New Long Railmade out of well seasoned teak wood complete all as specified and directed by Engr in Charge
147	(c) Short Rail : M&L for removing U/S short railS&F New Short Railmade out of well seasoned teak wood complete all as specified and directed by Engr in Charge
148	(d)Stiffener :M&L for removing U/S Sstiffener S&F New Stiffner made out of well seasoned teak wood complete all as specified and directed by Engr in Charge
149	(e) Legs : M&L for removing U/S LegS&F New Legmade out of well seasoned teak wood complete all as specified and directed by Engr in Charge
150	(f) Shoes: M&L for taking outworn out/unserviceable shoes from legs S&F new shoes of hard PVC fo superior quality with steel screw to the legs of the item all asspecified and directed by Engr-in-Charge
151	(g)Drawer : Removing U/S old broken drawer and S/F new made out of 6mm plywood commercial BWR grade.Rest all as per specification given in the drawing and directed by Engr in Charge.
152	(h) Bracket : S&F new bracket triangular shapewith 02 Nos steel screws suitable size bracket made out of II class hard wood duly polished to match the existing Table 3\"x2\" size 75 mm x 75 mm x 25 mm complete all as shown on drawing and as directed by Engr-in-Charge.
153	Table Bed Side : FD-28, 210 & FD-276
154	(a)Top :M& L for removing U/S top from the table and supply and fixing new top made out of 18/19 mm thick prelaminated MDF board exterior grade duly edging with 5 mmteak wood beading all around the top complete. All asspecfication in drg and directed by Engr in Charge
155	(b) Side LT/RT :M& L for removing U/S Side LT/RTfrom the table and supply and fixing new top made out of 18/19 mm thick prelaminated MDF board exterior grade duly edging with 5 mmteak wood beading all around the top complete. All asspecfication in drg and directed by Engr in Charge
156	Chair WBB : FD-56/285
157	(a)Rear Legs: Taking down old u/s Rear Leg and M&L for New leg made out of teak wood duly polished to match the existing Chair all as specified in drg and as directed by Engr-in-Charge.
158	(b) Front Legs: Taking down old u/s Front Leg and M&L for New leg made out of teak wood duly polished to match the existing Chairall as specified in drg and as directed by Engr-in-Charge.
159	(c)Side RailTaking down old u/s Side Rail and M&L for New Side Railmade out of teak woodduly polished to match the existing Chair all as specified in drg and as directed by Engr-in-Charge.
160	(d)Seat Frame : Taking down old u/s Seat Frameand M&L for New Seat Framemade out of 6mm thick commercial Plywood ISI Marked complete.All as specified in drg and as directed by Engr-in-Charge.
161	(e)Bottom Stiffener : Taking down old u/s Rear Leg and M&L for New leg made out of teak wood duly polished to match the existing Chair all as specified in drg and as directed by Engr-in-Charge.
162	(f) Back Strip :Taking down old u/s Rear Leg and M&L for New leg made out of teak wood duly polished to match the existing Chair all as specified in drg and as directed by Engr-in-Charge.
163	(g) Shoes:M&L for taking outworn out/unserviceable shoes from legs S&F new shoes of hard PVC fo superior quality with steel screw to the legs of the item all asspecified and directed by Engr-in-Charge
164	(h) Bracket : S&F new bracket triangular shapewith 02 Nos steel screws suitable size bracket made out of II class hard wood duly polished to match the existing Chairsize 75 mm x 75 mm x 25 mm complete all as shown on drawing and as directed by Engr-in-Charge.
165	Sofa Single Seater : FD-373
166	(a)Front/Rear legs : Taking down old U/S front/ rear leg of sofa single seater and S& F new front/ Rear leg of 2 nd class hard woodas per existing shape and size. All as specified in drawing and as directed by Engr-in-Charge
167	(b) Side Back/Front Rail: Taking down old U/S Side back/Front Railof sofa single seater and S& F new Side back/Front Rail of 2 nd class hard woodas per existing shape and size. All as specified in drawing and as directed by Engr-in-Charge Back/ Front.
168	(c) Battens forSeat/Back : Taking down old U/Sbatterns for seat/backof sofa single seater and S& F new batterns for seat/back of 2 nd class hard woodas per existing shape and size. All as specified in drawing and as directed by Engr-in-Charge
169	(d) Arms :Taking down old U/S front/ Arms of sofa set 4 seater and S& F new Armsof 2 nd class hard woodas per existing shape and size. All as specified in drawing and as directed by Engr-in-Charge
170	(e) Cushion forSeat :Removing of existing U/S cushion from seat of sofa single seater and S & F new foam cushion 100 mm thick 40 density duly stiched with fine standard thread and providing best quality chain with runner on one side as approved by GE/Engr-in-Charge.Rest all as specified in drg and as directed by Engr-in-Charge (Note : Rate of Tapestry cloth should not be less than Rs. 350.00 Per RM)
171	(f) Cushion forBack :Removing of existing U/S cushion from back of sofa set 4 seater and S & F new foam cushion 100 mm thick 40 density duly stiched with fine standard thread and providing best quality chain with runner on one side as approved by GE/Engr-in-Charge.Rest all as specified in drg and as directed by Engr-in-Charge (Note : Rate of Tapestry cloth should not be less than Rs. 350.00 Per RM)
172	(g) Shoes: M&L for taking outworn out/unserviceable shoes from legs S&F new shoes of hard PVC fo superior quality with steel screw to the legs of the item all asspecified and directed by Engr-in-Charge
173	(h) Cover Only for Sofa Single Seater :- Opening and taking out old unserviceable Cushion Cover size 21\"x22\"x4\" and S&FNew Cushion Covermade out of approved Tapestry cloth of best qualy duly stiched with fine standard thread and providing best quality chain with runner on one side as approved by GE/Engr-in-Charge.Rest all as specified in drg and as directed by Engr-in-Charge (Note : Rate of Tapestry cloth should not be less than Rs. 350.00 Per RM)
174	Sofa Set 3 Seater : FD-373
175	(a)Front/Rear legs : Taking down old U/S front/ rear leg of sofa set 3 seater and S& F new front/ Rear leg of 2 nd class hard woodas per existing shape and size. All as specified in drawing and as directed by Engr-in-Charge
176	(b) Back/Front Rail of 3 seater : Taking down old U/S Side back/Front Railof sofa set 3 seater and S& F new Side back/Front Rail of 2 nd class hard woodas per existing shape and size. All as specified in drawing and as directed by Engr-in-Charge Back/ Front.
177	(c) Battens forSeat/Back : Taking down old U/Sbatterns for seat/backof sofa set 3 seater and S& F new batterns for seat/back of 2 nd class hard woodas per existing shape and size. All as specified in drawing and as directed by Engr-in-Charge
178	(d) Arms :Taking down old U/S front/ Arms of sofa set 5 seater and S& F new Armsof 2 nd class hard woodas per existing shape and size. All as specified in drawing and as directed by Engr-in-Charge
179	(e) Cushion forSeat :Removing of existing U/S cushion from seat of sofa set 3 seater and S & F new foam cushion 100 mm thick 40 densityduly stiched with fine standard thread and providing best quality chain with runner on one side as approved by GE/Engr-in-Charge.Rest all as specified in drg and as directed by Engr-in-Charge (Note : Rate of Tapestry cloth should not be less than Rs. 350.00 Per RM)
180	(f) Cushion forBack : Removing of existing U/S cushion from back of sofa set 3 seater and S & F new foam cushion100 mm thick 40 density duly stiched with fine standard thread and providing best quality chain with runner on one side as approved by GE/Engr-in-Charge.Rest all as specified in drg and as directed by Engr-in-Charge (Note : Rate of Tapestry cloth should not be less than Rs. 350.00 Per RM)
181	(g) Shoes: M&L for taking outworn out/unserviceable shoes from legs S&F new shoes of hard PVC fo superior quality with steel screw to the legs of the item all asspecified and directed by Engr-in-Charge
182	(h) Cover Only for Sofa Set 3 Seater :- Opening and taking out old unserviceable Cushion Cover size 21\"x22\"x4\" and S&FNew Cushion Covermade out of approved Tapestry cloth of best qualy duly stiched with fine standard thread and providing best quality chain with runner on one side as approved by GE/Engr-in-Charge.Rest all as specified in drg and as directed by Engr-in-Charge (Note : Rate of Tapestry cloth should not be less than Rs. 350.00 Per RM)
183	Table Dining 1200x900 : FD/MAP-II/03
184	(a)Top :M& L for removing U/S top from the table and supply and fixing new top made out of 18/19 mm thick post forming prelaminated MDF board exterior grade. All asspecfication in drg and directed by Engr in Charge
185	(b)Long Rail : M&L for removing U/S long railS&F New Long Railmade out of well seasoned teak wood complete all as specified and directed by Engr in Charge
186	(c) Short Rail : M&L for removing U/S short railS&F New Short Railmade out of well seasoned teak wood complete all as specified and directed by Engr in Charge
187	(e) Legs : M&L for removing U/S LegS&F New Legmade out of well seasoned teak wood complete all as specified and directed by Engr in Charge
188	(f) Shoes: M&L for taking outworn out/unserviceable shoes from legs S&F new shoes of hard PVC fo superior quality with steel screw to the legs of the item all asspecified and directed by Engr-in-Charge
189	(g) Bracket : S&F new bracket triangular shapewith 02 Nos steel screws suitable size bracket made out of II class hard wood duly polished to match the existing Chair size 75 mm x 75 mm x 25 mm complete all as shown on drawing and as directed by Engr-in-Charge.
190	Chair Dining Cushioned : TP
191	(a)Rear LegsTaking down old u/s Rear Leg and M&L for New leg made out of teak wood duly polished to match the existing Chair all as specified in drg and as directed by Engr-in-Charge.
192	(b) Front LegsTaking down old u/s Front Leg and M&L for New leg made out of teak wood duly polished to match the existing Chairall as specified in drg and as directed by Engr-in-Charge.
193	(c)Side RailTaking down old u/s Side Rail and M&L for New Side Railmade out of teak woodduly polished to match the existing Chair all as specified in drg and as directed by Engr-in-Charge.
194	Front or BackRail Taking down old u/s Front or Back Railand M&L for New Front or Back Railmade out of teak woodduly polished to match the existing Chair all as specified in drg and as directed by Engr-in-Charge.
195	Bottom StiffenerTaking down old u/s Bottom Stiffener and M&L for New Bottom Stiffenermade out of teak wood duly polished to match the existing Chair all as specified in drg and as directed by Engr-in-Charge.
196	Back StripTaking down old u/s Back Strip and M&L for New back strip made out of teak wood duly polished to match the existing Chair all as specified in drg and as directed by Engr-in-Charge.
197	Bracket : S&F new bracket triangular shapewith 02 Nos steel screws suitable size bracket made out of II class hard wood duly polished to match the existing Chair Make : Bonsom/Tita champa size 75 mm x 75 mm x 25 mm complete all as shown on drawing and as directed by Engr-in-Charge.
198	Shoes: M & L for removing old/worn out rubber shoes with S & F new Rubber/PVC shoe of superior quality with steel plated screws of suitable size complete all as directed byEngr - in - Charge
199	Cushion forSeat :Removing of existing U/S cushion alongwith u/s ply from seat of chair diningandS & F new foam cushion 75 mm thick 32 density over suitable sized 12mm thick ply wood duly stiched with fine standard thread on one side as approved by GE/Engr-in-Charge.Rest all as specified in drg and as directed by Engr-in-Charge (Note : Rate of Tapestry cloth should not be less than Rs. 350.00 Per RM)
200	Chair Writing Cushioned : TP
201	Rear LegsTaking down old u/s Rear Leg and M&L for New leg made out of teak wood duly polished to match the existing Chair all as specified in drg and as directed by Engr-in-Charge.
202	Front LegsTaking down old u/s Front Leg and M&L for New leg made out of teak wood duly polished to match the existing Chairall as specified in drg and as directed by Engr-in-Charge.
203	Side RailTaking down old u/s Side Rail and M&L for New Side Railmade out of teak woodduly polished to match the existing Chair all as specified in drg and as directed by Engr-in-Charge.
204	Front or BackRail Taking down old u/s Front or Back Railand M&L for New Front or Back Railmade out of teak woodduly polished to match the existing Chair all as specified in drg and as directed by Engr-in-Charge.
205	Bottom StiffenerTaking down old u/s Bottom Stiffener and M&L for New Bottom Stiffenermade out of teak wood duly polished to match the existing Chair all as specified in drg and as directed by Engr-in-Charge.
206	Back StripTaking down old u/s Back Strip and M&L for New back strip made out of teak wood duly polished to match the existing Chair all as specified in drg and as directed by Engr-in-Charge.
207	Bracket : S&F new bracket triangular shapewith 02 Nos steel screws suitable size bracket made out of II class hard wood duly polished to match the existing Chairsize 75 mm x 75 mm x 25 mm complete all as shown on drawing and as directed by Engr-in-Charge.
208	Shoes: M & L for removing old/worn out rubber shoes with S & F new Rubber/PVC shoe of superior quality with steel plated screws of suitable size complete all as directed byEngr - in - Charge
209	Arms Rest: Taking down old u/s Arms Rest and M&L for New leg made out of teak wood duly polished to match the existing Chair all as specified in drg and as directed by Engr-in-Charge.
210	Cushion forSeat :Removing of existing U/S cushion from seat of chair writing cushionedand S & F new foam cushion 100 mm thick 32 density duly stiched with fine standard thread and providing best quality chain with runner on one side as approved by GE/Engr-in-Charge.Rest all as specified in drg and as directed by Engr-in-Charge (Note : Rate of Tapestry cloth should not be less than Rs. 350.00 Per RM)
211	Cushion forBack : Removing of existing U/S cushion from back of chair writing cushionedand S & F new foam cushion 100 mm thick 32 densityduly stiched with fine standard thread and providing best quality chain with runner on one side as approved by GE/Engr-in-Charge.Rest all as specified in drg and as directed by Engr-in-Charge (Note : Rate of Tapestry cloth should not be less than Rs. 350.00 Per RM)
212	Bin Linen Multipurpose : FD/E6/MAP/09
213	Top : Taking down old u/s Topand M&L for New Top made out of 18/19mm post forming Prelaminated MDF Board Exterior grade completeall as specified in drg and as directed by Engr-in-Charge.
214	Legs : Taking down old u/sLeg and M&L for New leg made out of teak wood all as specified in drg and as directed by Engr-in-Charge.
215	Long Rail :Taking down old u/s Long Rail and M&L for New Long Railmade out of teak wood all as specified in drg and as directed by Engr-in-Charge..
216	Short Rail :Taking down old u/s Short Railand M&L for New Short Railmade out of teak wood all as specified in drg and as directed by Engr-in-Charge.
217	Shutter: -M&L for removing old worn out shutter and supply and fixing new shutter made out of 18/19 mm Prelaminated Particle board exterior gradeduly edging 5 mm thick teak wood beading after removing old UNSV edging. Rest all as per drg .
218	Drawer: M&L for removing old worn out drawer from the table and new drawer made out of teak wood as specified in the drg and as directed by Engr in Charge .
219	Side LT/RT Taking down old u/s Side LT/RTand M&L for New Side LT/RT made out of 18/19mm Prelaminated MDF board Exterior gradecompleteall as specified in drg and as directed by Engr-in-Charge.
220	Back :-M&L for removing old worn out Back from the Side Boardand new Backmade out of 6mm Plywood commercial BWR grade. Rest all as specified in the drg and as directed by Engr in Charge .
221	Knob: M&L fortaking out old worn out knob from the drawer of the table and SF new knob of best quality approved by GE/Engr-in-Charge.Rest all as specified or as directed by Engr in Charge.
222	Sofa set 5 Seater with cushion seat & back cushioned (PINKY) of Delite-Hitech ; TP
223	Front/Rear legs : Taking down old U/S front/ rear leg of sofa set 5 seater and S & F new front/ Rear leg of teak woodas per existing shape and size. All as specified in drawing and as directed by Engr-in-Charge
224	Removing of existing U/S tapestry cloth of each singleseat sofa and S & F new tapestry cloth for cushions, side of arms, front rail duly stiched with fine standard thread. (Rate of tapestry should not be less than 350 per RM)
225	Removing of existing u/s cushion of Seat & Back, Arms Rest and sides. S & F New cushion of 100 mm thick 40 density for seat and back (02 Nos Cushion) and 40mm thick 40 density size as required for side of arm rest and front rail
226	Removing of existing U/S tapestry cloth of each 3 seats sofa and S & F new tapestry cloth duly stiched with fine standard thread. (Rate of tapestry should not be less than 350 per RM)
227	Removing of existing u/s cushion for sofa set 3 seats including Seat & Back, Arms Rest and sides.S & F New cushion of 100 mm thick 32 density for seat and back (06 cushion) and 40mm thick 40 density size as required for side of arm rest and front rail. Make - Sleepwell/Kurlon.
228	Material and Labour for polishing of furniture including scrapping of rough surface and old worn out polished layer with scrapper /sand paper for smoothing the surface and polishing the same with of approved qualityfrench polish to glossy finish. The items are mentioned below :-
229	Chair DiningFD-279/203/16/262
230	Chair Writing FD/20/202/250/280
231	Chair EasyFD-229/201/17
232	Chair WBBFD-26/225/285
233	Bed Hard FD-246/245/247
234	Side Board FD-241/26
235	Bin Soiled Linen FD-244/15(m)/212
236	StoolDressing FD-27/252/282
237	Table Dressing Ladies FD-251/32
238	Table Dressing Gents FD-230/231
239	Table Writing FD-249/275/33(m)
240	Teapoy FD-232/278
241	Table Centre FD-235/274
242	Table Peg FD-236/277
243	Table Dining 6 Persons FD-273/329
244	Table Dining 8 Persons FD-273/329
245	Table 3\"x2\" with out drawer FD-231/223/284
246	Table 3\"x2\" with drawers FD-231/223/283/284
247	Table bed side FD-236/276
248	Sofa Single Seater FD-281
249	Sofa Set 3 Seater FD-281
250	Table dining 1200x900 FD/MAP-II/03
251	ChairDinning Cushioned(FD/E6/MAP/10)
252	Chair writing cushioned (TP)
253	Bin Linen Multipurpose (FD/E6/MAP/09)
254	Sofa set 4 seater with cushion seat & back cushioned (PINKY) of Delite-Hi-Tech
255	Sofa set 5 seater with cushion seat & back cushioned (PINKY) of Delite-Hi-Tech

Tender Documents

SR No	FileName	File Description
1	Click here to download tender document	Tender Documents
2	Click here to download tender document	Tender Documents
3	Click here to download tender document	Tender Documents
4	Click here to download tender document	Tender Documents

Also Visit

Tenders

Rajasthan Tenders

Furniture Tenders

Furniture Items Tenders

Wooden Furniture Tenders

Disclaimer

We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.

Top

Tender For Repair To Wooden Furniture And Misc Furniture And Polishing Etc At A A Banar Under Ge Banar, Jodhpur-Rajasthan

Tender Documents

Disclaimer

About Us

Services

Browse Tenders

For Sales Inquiry

Tender For Repair To Wooden Furniture And Misc Furniture And Polishing Etc At A A Banar Under Ge Banar, Jodhpur-Rajasthan

Tender Documents

Disclaimer

OTP Verification

About Us

Services

Browse Tenders

For Sales Inquiry

Connect With Us