|
| 1 | PART-A SUPPLY |
| 2 | 58.5KVA DG SETFOR KALYANMANTAPA |
| 3 | PART-B INSTALLATION & COMMISSIONING |
| 4 | Installation, testing & commissioning of dg Set |
| 5 | obtaining necessary statutory approvals |
| 6 | Supplying & laying (by Excavating in the hard Rock) of LT power cable 3.5Cx95 Sq.mm with Aluminium conductor, XLPE insulated, PVC inner sheathed, armoured, 1.1 kV grade (A2XFY), confirming to IS:7098 (part-1) & relevant standards. |
| 7 | Supplying and laying 25 mm X 5 mm copper strip at 0.50 metre below ground as strip earth electrode, including connection/ terminating with nut, bolt, spring, washer etc. as required. (Jointing shall be done by overlapping and with 2 sets of brass nut bolt & spring washer spaced at 50mm) |
| 8 | Supplying and laying 25 mm X 5 mm G.I strip at 0.50 metre below ground as strip earth electrode, including connection/ terminating with G.I. nut, bolt, spring, washer etc. as required. (Jointing shall be done by overlapping and with 2 sets of G.I. nut bolt & spring washer spaced at 50mm). |
| 9 | Supplying of installation materials such as Exhaust piping of suitable dia with necessary bends, flanges, gaskets, fasteners etc., confirming to IS:3589, Fuel piping, Silencer and its supports, glass wool aluminium cladding, battery stand, anti-vibration mountings & connecting cables, control cables and associated GI hardware items of standard makes as per standards. (As a Lump sum quantity suitable for site requirements). |
| 10 | Supplying ofrequired materials GI |
| 11 | Supplying ofrequired materials CU |
| 12 | Supplying and making end termination with brass compression double compression glands and aluminium lugs for 3.5C x 95 Sq.mm A2XFY cable as required. |
| 13 | Releasing of the existing AMF panel connected to the 125KVA DG set & 62.5 KVA DG Set by disconnecting all the Cables |
| 14 | PART-C AMC |
| 15 | 1st Year AMC Charges of DG SET |
| 16 | 2nd Year AMC Charges of DG SET |
| 17 | 3rd Year AMC Charges of DG SET |
