Tender For Mechanical And Fire Fighting Works Along With Associated Piping For The Ambient Air Heater Project Supply, Installation, Fabrication, Erection, Testing And Commissioning Of Mechanical Works Along With Associated Piping For The Ambient Air Heate, Chennai-Tamil Nadu

TDR : 53110383

Tender Notice
BOQ

25 Days Left

Chennai , Tamil Nadu

Tender Brief : Tender For Mechanical And Fire Fighting Works Along With Associated Piping For The Ambient Air Heater Project Supply, Installation, Fabrication, Erection, Testing And Commissioning Of Mechanical Works Along With Associated Piping For The Ambient Air Heate

Document Fees
Refer document

EMD
₹ 982800.0 /-

Tender Value
₹ 9.83 Crore /-

Submission Date
19-01-2026

Competition Type
Indian

Bidding Type
Tender

Need a Business Loan? Apply Now !


1	Piping and Mechanical WORKS - PRODUCT , WATER, AIR, N2 PIPINGSCHEDULE OF RATES FOR LAYING FABRICATION, ERECTION, TESTING & COMMISSIONING OF PRODUCT , WATER, AIR, N2 PIPING WORKSLAYING & WELDING OF PRODUCT PIPING (ABOVE GROUND)Laying and welding (3 runs min.) above ground/ below ground pipelines from supplied LTCS of the following sizes as described below, including cutting bevelling and fixing the supplied specials such as elbows, bends, tees, reducers, weldolet, socolet, coupling etc complete and hydrotesting the pipelines at 1.5 times Design pressure for a minimum period of Minimum 30min. The job includes dye penetration (DP) testing of pipeline joints as per approved QAP. Above ground pipeline to be laid through shoe/C-clamp support on concrete pedestals / pipe racks/ shed/ Equipment house and painting the pipeline including the colour coding as per the specifications enclosed. Welding of pipeline should conform to Radiography quality. 100% of the joints for product piping shall be radiographed and the cost of the same will be paid separately as per relevant line item.Note:a.Any repairs to the defective welding shall be made good at no extra cost. Re radiography of repaired joint shall also be at contractor\"s cost.b. The rates quoted also to include supply and application of painting and colour coding shall be as per Painting specifications (document no-W.004412-G-11097-P005).c. Welding and fixing of Flange and valves shall be paid separately as per schedule of rates indicated elsewhere in this SOR. d. Supply and Installation of Support shoe/ C-clamp, rod, secondary steel etc as per detail Piping GA drawing for the product pipe shall be paid separately as per schedule of rates indicated elsewhere in this SOR.e. Supply and Installation of insulation etc shall be paid separately as per schedule of rates indicated elsewhere in this SOR.f. RM length for payment shall be the installation portion of pipe including fitting of all sizes excluding flange and valves. Installation of flanges and valves shall be paid separately as per schedule of rates indicated elsewhere in this SOR.g. Preparation of documentation (Field quality plan, Fabrication, Isometric drawing from Piping GA, etc) .
2	15NB PIPE, ASTM A333 Gr.6, ASME B36.10M, S-160, PE, SEAMLESS
3	20NB PIPE, ASTM A333 Gr.6, ASME B36.10M, S-160, PE, SEAMLESS
4	25NB PIPE, ASTM A333 Gr.6, ASME B36.10M, S-80, PE, SEAMLESS
5	40NB PIPE, ASTM A333 Gr.6, ASME B36.10M, S-80, PE, SEAMLESS
6	50NB PIPE, ASTM A333 Gr.6, ASME B36.10M, S-80, BE, SEAMLESS
7	80NB PIPE, ASTM A333 Gr.6, ASME B36.10M, S-40, BE, SEAMLESS
8	100NB PIPE, ASTM A333 Gr.6, ASME B36.10M, S-40, BE, SEAMLESS
9	150NB PIPE, ASTM A333 Gr.6, ASME B36.10M, S-40, BE, SEAMLESS
10	250NB PIPE, ASTM A333 Gr.6, ASME B36.10M, S-40, BE, SEAMLESS
11	300NB PIPE, ASTM A333 Gr.6, ASME B36.10M, S-40, BE, SEAMLESS
12	LAYING & WELDING OF CS PIPE for N2 linesLaying and welding (3 runs min.) above ground CS piping shall shift the same to the site of work at no extra cost withall leads and lifts) of the following sizes as described below, including cutting bevelling and fixing the supplied specials such as elbows, bends tees, reducers, weldolet, socolet, couplingetc complete and hydrotesting the pipelines at 1.5 times Design pressure for a minimum period of Minimum 30min.The job includes dye penetration (DP) testing of pipeline joints as per approved QAP. Above ground pipeline to be laid on concrete pedestals and painting the pipeline as per the specifications enclosed.Note: a.Any repairs to the defective welding shall be made good at no extra cost. b.The rates quoted also to include supply and application of painting andcolour coding shall be as per Painting specifications (document no-W.004412-G-11097-P005). c. Welding and fixing of Flange and valves shall be paid separately as per schedule of rates indicated elsewhere in this SOR. d. Supply and Installation of U-bolts, nuts, washers etc to be included in this SOR line item.e. Supply and Installation of secondary steel etc as per detail Piping GA drawingshall be paid separately as per schedule of rates indicated elsewhere in this SOR.f. RM length for payment shall be the installation portion of pipe including fitting of all sizes excluding flange and valves. Installation of flanges and valves shall be paid separately as per schedule of rates indicated elsewhere in this SOR.g. Preparation of documentation (Fabrication, Isometric drawing from Piping GA, etc).
13	25 NB PIPE, ASTM A106 Gr.B, ASME B36.10M, S-80, BE, SEAMLESS
14	50 NB PIPE, ASTM A106 Gr.B, ASME B36.10M, S-STD, BE, SEAMLESS
15	100 NB PIPE, ASTM A106 Gr.B, ASME B36.10M, S-STD, BE, SEAMLESS
16	LAYING & INSTALLATION OF GI MS pipe for INSTRUMENTATION AIR & Condensed water Transfer PIPE LINELaying and welding (3 runs min.)MS GI piping shall shift the same to the site of work at no extra cost withall leads and lifts) of the following sizes as described below, including cutting bevelling and fixing the supplied specials such as elbows, bends tees, reducers, weldolet, socolet, couplingetc complete and hydrotesting the pipelines at 1.5 times Design pressure for a minimum period of Minimum 30min.The job includes dye penetration (DP) testing of pipeline joints as per approved QAP. Above ground pipeline to be laid on concrete pedestals and painting the pipeline as per the specifications enclosed.Note: a.Any repairs to the defective welding shall be made good at no extra cost.b.The rates quoted also to include supply and application of painting andcolour coding shall be as per Painting specifications (document no-W.004412-G-11097-P005). c. Welding and fixing of Flange and valves shall be paid separately as per schedule of rates indicated elsewhere in this SOR. d. Supply and Installation of U-bolts, nuts, washers etc to be included in this SOR line item.e. Supply and Installation of secondary steel etc as per detail Piping GA drawingshall be paid separately as per schedule of rates indicated elsewhere in this SOR.f. RM length for payment shall be the installation portion of pipe including fitting of all sizes excluding flange and valves. Installation of flanges and valves shall be paid separately as per schedule of rates indicated elsewhere in this SOR.g. Preparation of documentation (Fabrication, Isometric drawing from Piping GA, etc) .
17	15 NB, PIPE, IS-1239 PART-1, HEAVY GRADE, GALVANIZED, PE
18	25 NB, PIPE, IS-1239 PART-1, HEAVY GRADE, GALVANIZED, PE
19	50 NB, PIPE, IS-1239 PART-1, HEAVY GRADE, GALVANIZED, BE
20	80 NB,PIPE, IS-1239 PART-1, HEAVY GRADE, GALVANIZED, BE
21	100 NB,PIPE, IS-1239 PART-1, HEAVY GRADE, GALVANIZED, BE
22	150 NB,PIPE, IS-1239 PART-1, HEAVY GRADE, GALVANIZED, BE
23	Radiography inspection on Product piping joints of all types and thickness including providing all necessary equipment required to perform the work as per our specification and direction of engineer-in-charge. The radiographs shall be submitted to the engineer in charge at site/ third party inspecting agency.Notes:1. Biddershall consult with IOCL /IOCL\"s Representative before execution of radiography for lengths and width of the film to be used.2. As a guide line,3\" wide film shall be used Upto 2\" dia pipes.4” wide film shall be used above 2\" dia pipes.
24	50 mm dia pipe
25	80 mm dia pipe
26	100 mm dia pipe
27	150 mm dia pipe
28	250 mm dia pipe
29	300 mm dia Pipe
30	Installation and Welding of the supplied WNR/SOR flanges on the pipelines with 1 run inside and three runs outside etc complete and as per specifications enclosed.The job includes dye penetration (DP) testing of pipeline joints as per approved QAP. Surface Preparation and Painting shall be as per the specifications enclosed including the colour coding as per IPPL specifications. Welding of flanges should conform to Radiography quality. The cost of the same will be paid separately as per respective item etc. and as directed at site.Note: a.Any repairs to the defective welding shall be made good at no extra cost. Re radiography of repaired joint shall also be at contractor\"s cost.b. The rates quoted also to include supply and application of painting on product piping in line with colour coding of pipelines as per the PTS Painting.
31	LTCS Flanges for Product Piping
32	20 NB FLANGE, SWRF, ASTM A350 LF2, ASME B16.5, CLASS 300, SW - ASME B16.25,S-160, SERRATED FINISH
33	25 NB FLANGE, SWRF, ASTM A350 LF2, ASME B16.5, CLASS 150, SW - ASME B16.25,S-80, SERRATED FINISH
34	25 NB FLANGE, SWRF, ASTM A350 LF2, ASME B16.5, CLASS 300, SW - ASME B16.25,S-80, SERRATED FINISH
35	40 NBFLANGE, WNRF, ASTM A350 LF2, ASME B16.5, CLASS 300, BW- ASME B16.25,S-80, SERRATED FINISH
36	50 NBFLANGE, WNRF, ASTM A350 LF2, ASME B16.5, CLASS 150, BW- ASME B16.25,S-80, SERRATED FINISH
37	50 NBFLANGE, WNRF, ASTM A350 LF2, ASME B16.5, CLASS 300, BW- ASME B16.25,S-80, SERRATED FINISH
38	80 NBFLANGE, WNRF, ASTM A350 LF2, ASME B16.5, CLASS 300, BW- ASME B16.25,S-40, SERRATED FINISH
39	100 NBFLANGE, WNRF, ASTM A350 LF2 LF2, ASME B16.5, CLASS 300, BW- ASME B16.25,S-40, SERRATED FINISH
40	150 NBFLANGE, WNRF, ASTM A350 LF2, ASME B16.5, CLASS 300, BW- ASME B16.25,S-40, SERRATED FINISH
41	200 NBFLANGE, WNRF, ASTM A350 LF2, ASME B16.5, CLASS 300, BW- ASME B16.25,S-40, SERRATED FINISH
42	250 NBFLANGE, WNRF, ASTM A350 LF2, ASME B16.5, CLASS 300, BW- ASME B16.25,S-40, SERRATED FINISH
43	300 NBFLANGE, WNRF, ASTM A350 LF2, ASME B16.5, CLASS 300, BW- ASME B16.25,S-40, SERRATED FINISH
44	CS Flanges for N2 Piping
45	25 NB FLANGE, SWRF, ASTM A105, ASME B16.5, CLASS 300, SW -ASME B16.25, S-80, SERRATED FINISH
46	50 NB FLANGE, WNRF, ASTM A105, ASME B16.5, CLASS 300, BW- ASME B16.25,S-STD, SERRATED FINISH
47	100 NB FLANGE, WNRF, ASTM A105, ASME B16.5, CLASS 300, BW- ASME B16.25,S-STD, SERRATED FINISH
48	MS GI Flanges for IA line & Condensed water transfer line
49	15 NB FLANGE, SWRF, ASTM A 105 (Galvanized), ASME B16.5, CLASS 150, SERRATED FINISH
50	20 NB FLANGE, SWRF, ASTM A 105 (Galvanized), ASME B16.5, CLASS 150, SERRATED FINISH
51	25 NB FLANGE, SWRF, ASTM A 105 (Galvanized), ASME B16.5, CLASS 150, SERRATED FINISH
52	50 NB FLANGE,SORF, ASTM A 105 (Galvanized), ASME B16.5, CLASS 150, SERRATED FINISH
53	65 NB FLANGE,WNRF, ASTM A 105 (Galvanized), ASME B16.5, CLASS 150, SERRATED FINISH
54	80 NB FLANGE, WNRF, ASTM A 105 (Galvanized), ASME B16.5, CLASS 150, SERRATED FINISH
55	100 NB FLANGE, SORF, ASTM A 105 (Galvanized), ASME B16.5, CLASS 150, SERRATED FINISH
56	150 NBFLANGE, SORF, ASTM A 105 (Galvanized), ASME B16.5, CLASS 150, SERRATED FINISH
57	Making flanged joints between flanges (WNRF/SORF/BLRF) of approved make for the following sizes, as per attached specifications, Data sheet and site instructions.Rate shall Include :1) Supplying, Fixing & Installation of Stud Bolts, Nuts & Gaskets, washers, greasing ( Inclusive in Unit rates ). Material of Gasket & Fastners shall be as mentioned below :-Fastners Material for CS Flanges : STUD BOLT, A193-B7 (Hot Dip Galvanised) , NUT, A194-2H (Hot Dip Galvanised)-Fastners Material for LTCS Flanges : STUD BOLT, A320 Gr.L7 (Hot Dip Galvanised), NUT, A194 Gr.4 (Hot Dip Galvanised)-Gasket Material : Spiral Wound SS316L with SS316LOuter ring and SS316L inner ring and graphite filler. (Thickness as per PMS)2) Cost for welding of flanges to respective pipe shall be paid separately as per schedule of rates indicated elsewhere in this SOR. This sectioned includes for cost of Bolts Tightening only.3) Vendor shall estimate the Quantity of Bolts & Nuts, washers supply based on the Fittings & Flange BOQ provided with tender.4) Material of Bolts Nuts shall be in line with respective Piping Material Specification5) The flange joint shall also include providing and fixing multistrand copper wire/flat for bonding of product pipelines including provision of lugs.6) All fasteners must be hot dip galvanized with coating 80 - 100 micron or appropriate coated to protect corrosion affect, after fasteners fixing, painting shall be done as per client approved procedure
58	20 NB FLANGE, SWRF, ASTM A350 LF2, ASME B16.5, CLASS 300, SW - ASME B16.25,S-160, SERRATED FINISH
59	25 NB FLANGE, SWRF, ASTM A350 LF2, ASME B16.5, CLASS 150, SW - ASME B16.25,S-80, SERRATED FINISH
60	25 NB FLANGE, SWRF, ASTM A350 LF2, ASME B16.5, CLASS 300, SW - ASME B16.25,S-80, SERRATED FINISH
61	40 NBFLANGE, WNRF, ASTM A350 LF2, ASME B16.5, CLASS 300, BW- ASME B16.25,S-80, SERRATED FINISH
62	50 NBFLANGE, WNRF, ASTM A350 LF2, ASME B16.5, CLASS 150, BW- ASME B16.25,S-80, SERRATED FINISH
63	50 NBFLANGE, WNRF, ASTM A350 LF2, ASME B16.5, CLASS 300, BW- ASME B16.25,S-80, SERRATED FINISH
64	80 NBFLANGE, WNRF, ASTM A350 LF2, ASME B16.5, CLASS 300, BW- ASME B16.25,S-40, SERRATED FINISH
65	100 NBFLANGE, WNRF, ASTM A350 LF2 LF2, ASME B16.5, CLASS 300, BW- ASME B16.25,S-40, SERRATED FINISH
66	150 NBFLANGE, WNRF, ASTM A350 LF2, ASME B16.5, CLASS 300, BW- ASME B16.25,S-40, SERRATED FINISH
67	200 NBFLANGE, WNRF, ASTM A350 LF2, ASME B16.5, CLASS 300, BW- ASME B16.25,S-40, SERRATED FINISH
68	250 NBFLANGE, WNRF, ASTM A350 LF2, ASME B16.5, CLASS 300, BW- ASME B16.25,S-40, SERRATED FINISH
69	300 NBFLANGE, WNRF, ASTM A350 LF2, ASME B16.5, CLASS 300, BW- ASME B16.25,S-40, SERRATED FINISH
70	25 NB FLANGE, SWRF, ASTM A105, ASME B16.5, CLASS 300, SW -ASME B16.25, S-80, SERRATED FINISH
71	50 NB FLANGE, WNRF, ASTM A105, ASME B16.5, CLASS 300, BW- ASME B16.25,S-STD, SERRATED FINISH
72	100 NB FLANGE, WNRF, ASTM A105, ASME B16.5, CLASS 300, BW- ASME B16.25,S-STD, SERRATED FINISH
73	15 NB FLANGE, SWRF, ASTM A 105 (Galvanized), ASME B16.5, CLASS 150, SERRATED FINISH
74	20 NB FLANGE, SWRF, ASTM A 105 (Galvanized), ASME B16.5, CLASS 150, SERRATED FINISH
75	25 NB FLANGE, SWRF, ASTM A 105 (Galvanized), ASME B16.5, CLASS 150, SERRATED FINISH
76	50 NB FLANGE,SORF, ASTM A 105 (Galvanized), ASME B16.5, CLASS 150, SERRATED FINISH
77	65 NB FLANGE,WNRF, ASTM A 105 (Galvanized), ASME B16.5, CLASS 150, SERRATED FINISH
78	80 NB FLANGE, WNRF, ASTM A 105 (Galvanized), ASME B16.5, CLASS 150, SERRATED FINISH
79	100 NB FLANGE, SORF, ASTM A 105 (Galvanized), ASME B16.5, CLASS 150, SERRATED FINISH
80	150 NBFLANGE, SORF, ASTM A 105 (Galvanized), ASME B16.5, CLASS 150, SERRATED FINISH
81	Fixing & Installation of the supplied HOV GATE VALVE / HOV BALL VALVE/HOV NRV/GLOBE VALVE/ Butterfly Other of the following sizes on the pipeline for the following sizes as per attached specifications, Data sheet and site instructions.. Rate shall Include :1) Valves Erection Only. 2) Supplying, Fixing & Installation of Stud Bolts, Nuts & Gaskets. Bolting of Flanged Valves shallbe paid seperately against item no. 6.0 i.e. (Making flanged joints )3) Storing Valves in enclosed environment.4) mechanical cleaning/greasing of the valves after erection.5) The rates quoted also to include supply and application of painting on product piping in line with colour coding of pipelines as per the PTS Painting.Painting Specification : Surface Preparation and Primer is applicable for insulated product & steam piping as per PTS Painting.6) Item includes providing 8 SWG bare Cu wire for bonding between flanges for sizes up to 300 mm dia for Product pipelines.
82	15 NB
83	20 NB
84	25 NB
85	40 NB
86	50 NB
87	80 NB
88	100 NB
89	150 NB
90	200 NB
91	250 NB
92	300 NB
93	Installing the supplied pneumatic operated shutdown valve as per specifications. Note: a. The job includes mechanical cleaning of valves and painting and colour coating as per Painting specification. The job includes providing and fixing impulse as per manufacturer\"s recommendations.b. Bonding of the valves shall be done using multistrand copper wire/flat for bonding of product pipelines including provision of lugs.c) Supplying, Fixing & Installation of Stud Bolts, Nuts, washers & Gaskets. Bolting of Flanged Valves shallbe paid seperately against item no. 6.0 i.e. (Making flanged joints )
94	300mm dia , Solenoid operated Tripple offset Butterfly Valve, ASTM A 352 Gr. LCB, ASME B16.10, CLASS 300, DOUBLE FLANGED AS PER ASME B 16.5 RF, SERRATED FINISH
95	Fixing the Thermal relief valves, Air Relief Valve &Pressure relief valves With Spiral Wound & Graphite Filled Metallic gaskets (with 100% spare quantity) confirm to SS316 with Graphite fill as per ASME B16.20, nuts & stud bolts confirm STUD BOLT, A320 Gr.L7 (Hot Dip Galvanised), NUT, A194 Gr.4 (Hot Dip Galvanised) - as per attached specifications, Data sheet and site instructions.
96	20NB X 25NB, TRV,A351 Gr CF8, ASME B16.34, ASME SEC VIII DIV I, ASME B16.10, CLASS 300, FLANGED -RAISED FACE DRILLING AS PER ASME B16.5 INLET CLASS 300& OUTLET CLASS 150.
97	INSTALLATION OF SUPPLIED Ambient Air heater system: Transportation incuding loading & Unloading with all leads & liftsof Equipments, Vessels, machinery etc. from OWNER\"s Trailors/ Trucks etc andstores/storage yard of contractor /inside the Terminal to the work site; assembly of parts/sub-assemblies; checking, cleaning and preparing the top of foundation and pockets for erection; placing the equipments, Equipments installations, machinery etc. on foundation or structure; leveling, alignment, grouting,first maintenance; and make ready for commissioning ,completion of all jobs as per drawings, scope of work & technical conditions as defined in the enquiry specifications, standards, codes and instructions of OWNER/CONSULTANT.Rates shall include cost of labor, supervision, deployment of tools & tackles, consumables, cranes of suitatable capacity, hydra, materials and other associated arrangements required to execute all the related activities. as per the enclosed specifications, data sheets, PID etc.NOTE: a) Erection of Equipments/ Vessels etc shall be done under the supervision ofOEM VENDOR/ SPECIALIST.b) The cost of RCC foundation, grouting,MS Structural steel etc shall be measured & paid separately under respective civil items.c) Painting with approved make, colour, shade including colour coding as per specifications shall be part of rate quoted.d) Item includes provision of Mill rate fitter, required dial gauges & aligning all the rotary equipment within the tolerance limits.e) Unloading of equipments & storing the same in IPPL premises is also included in the scope of bidder.
98	PROPANE AMBIENT AIR HEATER FOR 240MT/HR DESIGN FLOW(5 bays with 2 tube bundles/bay using 2 nos FD fan/bay each motor rating 45KW)
99	BUTANE AMBIENT AIR HEATER FOR 240MT/HR DESIGN FLOW (2 bays with 2 tube bundles/bay using 3 nos FD fan/bay each motor rating 45KW)
100	Supply, fabrication,edge preparation & erection of pipe supports along with requirement of shoes, cradles, hangers, clamps (of all sizes/thicknesses), turn buckles, stiffening rings, guides, special supports, pads, T post, point support to pipes etc as per drawings, standards, specifications, conditions & instructions of Owner / Owner’s representative. The rate shall include blast cleaning of external surfaces of supports to SA 2½ & painting as per IPPL spec,the cost of materials, consumables, labor and overheads/profits etc.NOTES: For Supply, Fabrication & Erection of supports a) Pipe supports materials, all fasteners such as bolts, studs, nuts, washers, all types of required anchor bolts etc. are to be supplied by VENDOR at his cost. Fixing of all the anchor bolts is in vendor scope.b) Welding for supports shall include preheating and all tests such as dye-penetrant test, pneumatic tests, hardness test etc. as required by standards, codes, specifications and instructions of OWNER / OWNER REPRESENTATIVE.c) Pipe support includes structural’s & trunnion pipes.d) All Structural steel must be hot dip galvanized with coating, painting shall be done as per client approved procedure
101	Installation of wear pad over pedestals including cutting and fabrication from supplied pipes (same diameter, schedule etc) and welding of the same on pipelines under pedestals with minimum 2 run of welding complete including tell tale hole as per specifications, drawings and directions of Engineer in charge to be included in this SOR line item. Civil works for the RCC Pipe Pedestal/ Sleeper along with connected Base plate shall be under civil contractor scope,.
102	50 NB
103	100 NB
104	150 NB
105	250 NB
106	300 NB
107	Supply, fabrication,edge preparation, erection and installation of cold pipe support along with requirement of shoes, cradles, hangers, clamps, insulation etc as per detail Piping GA drawing and technical specification for following sizes:
108	15 NB
109	20 NB
110	25 NB
111	50 NB
112	80 NB
113	100 NB
114	150 NB
115	200 NB
116	250 NB
117	300 NB
118	SUPPLY ITEMS: FOR PIPELINE WORKS (Supply of Items as per attached PTS,GTS,Data Sheet,QAP and PMS, PID, GAD)1. Before procurement of any of the materials Contractor will take prior approval from IPPL/EPMC.2. Payment will be made for actual quantity used3. All items under this section shall be quoted for supply to site including unloading & Stacking properly anywhere inside the IPPL premises as directed . Third party inspection for the supply items shall be in tenderer\"s scope, wherever applicable. Approval of TPI agency shall be obtained from M/S IPPL on award of contract & engaged for inspection & clearance of all materials as per agreed QAP to be firmed up after placement of order by the Corporation.LTCS PIPES for Product
119	15NB PIPE, ASTM A333 Gr.6, ASME B36.10M, S-160, PE, SEAMLESS
120	20NB PIPE, ASTM A333 Gr.6, ASME B36.10M, S-160, PE, SEAMLESS
121	25NB PIPE, ASTM A333 Gr.6, ASME B36.10M, S-80, PE, SEAMLESS
122	40NB PIPE, ASTM A333 Gr.6, ASME B36.10M, S-80, PE, SEAMLESS
123	50NB PIPE, ASTM A333 Gr.6, ASME B36.10M, S-80, BE, SEAMLESS
124	80NB PIPE, ASTM A333 Gr.6, ASME B36.10M, S-40, BE, SEAMLESS
125	100NB PIPE, ASTM A333 Gr.6, ASME B36.10M, S-40, BE, SEAMLESS
126	150NB PIPE, ASTM A333 Gr.6, ASME B36.10M, S-40, BE, SEAMLESS
127	250NB PIPE, ASTM A333 Gr.6, ASME B36.10M, S-40, BE, SEAMLESS
128	300NB PIPE, ASTM A333 Gr.6, ASME B36.10M, S-40, BE, SEAMLESS
129	CS PIPE for N2 lines
130	25 NB PIPE, ASTM A106 Gr.B, ASME B36.10M, S-80, BE, SEAMLESS
131	50 NB PIPE, ASTM A106 Gr.B, ASME B36.10M, S-STD, BE, SEAMLESS
132	100 NB PIPE, ASTM A106 Gr.B, ASME B36.10M, S-STD, BE, SEAMLESS
133	GI PIPE forIA line & Condensed water transfer line
134	15 NB, PIPE, IS-1239 PART-1, HEAVY GRADE, GALVANIZED, PE
135	25 NB, PIPE, IS-1239 PART-1, HEAVY GRADE, GALVANIZED, PE
136	50 NB, PIPE, IS-1239 PART-1, HEAVY GRADE, GALVANIZED, BE
137	65 NB, PIPE, IS-1239 PART-1, HEAVY GRADE, GALVANIZED, BE
138	80 NB,PIPE, IS-1239 PART-1, HEAVY GRADE, GALVANIZED, BE
139	100 NB,PIPE, IS-1239 PART-1, HEAVY GRADE, GALVANIZED, BE
140	150 NB,PIPE, IS-1239 PART-1, HEAVY GRADE, GALVANIZED, BE
141	Supply LTCS Ball Valve for product line as per attached PTS,Data Sheet, Valve list ,QAP, PMS and PID.
142	20 mm dia ,HOV BALL VALVE,ASTM A 352 Gr. LCB, ASME B16.10, ISO EN 17292, CLASS 300, FLANGED -RAISED FACE DRILLING AS PER ASME B16.5 WRENCH OPERATED.
143	25 mm dia ,HOV BALL VALVE,ASTM A 352 Gr. LCB, ASME B16.10, ISO EN 17292, CLASS 300, FLANGED -RAISED FACE DRILLING AS PER ASME B16.5,SERRATED FINISH, WRENCH OPERATED.
144	25 mm dia ,HOV BALL VALVE,ASTM A 352 Gr. LCB, ASME B16.10, ISO EN 17292, CLASS 150, FLANGED -RAISED FACE DRILLING AS PER ASME B16.5,SERRATED FINISH , WRENCH OPERATED.
145	50 mm dia ,HOV BALL VALVE,ASTM A 352 Gr. LCB, ASME B16.10, ISO EN 17292, CLASS 300, FLANGED -RAISED FACE DRILLING AS PER ASME B16.5,SERRATED FINISH, WRENCH OPERATED.
146	100 mm dia ,HOV BALL VALVE,ASTM A 352 Gr. LCB, ASME B16.10, ISO EN 17292, CLASS 300, FLANGED -RAISED FACE DRILLING AS PER ASME B16.5, SERRATED FINISH, Gear OPERATED.
147	150 mm dia ,HOV BALL VALVE,ASTM A 352 Gr. LCB, ASME B16.10, ISO EN 17292, CLASS 300, FLANGED -RAISED FACE DRILLING AS PER ASME B16.5, SERRATED FINISH, Gear OPERATED.
148	Supply CS Ball Valve for Utility lines & IA and condensed Water line: as per attached PTS,Data Sheet, Valve list ,QAP, PMS and PID.
149	15 mm dia ,HOV BALL VALVE, ASTM A 105, ASME B16.10, ISO EN 17292/BS 5351, CLASS 150,FLANGED -RAISED FACE DRILLING AS PER ASME B16.5SERRATED FINISH,WRENCH OPERATED.
150	20 mm dia ,HOV BALL VALVE, ASTM A 105, ASME B16.10, ISO EN 17292, CLASS 150,FLANGED -RAISED FACE DRILLING AS PER ASME B16.5SERRATED FINISH,WRENCH OPERATED.
151	25 mm dia, HOV BALL VALVE, ASTM A 105, ASME B16.10, ISO EN 17292, CLASS 150,FLANGED -RAISED FACE DRILLING AS PER ASME B16.5SERRATED FINISH,WRENCH OPERATED.
152	25 mm dia, HOV BALL VALVE, ASTM A 105, ASME B16.10, ISO EN 17292, CLASS 300,FLANGED -RAISED FACE DRILLING AS PER ASME B16.5SERRATED FINISH,WRENCH OPERATED.
153	50 mm dia ,HOV BALL VALVE, ASTM A 216 GR WCB, ASME B16.10, ISO EN 17292, CLASS 150, FLANGED -RAISED FACE DRILLING AS PER ASME B16.5SERRATED FINISH,WRENCH OPERATED.
154	100 mm dia ,HOV BALL VALVE, ASTM A 216 GR WCB, ASME B16.10, ISO EN 17292, CLASS 150, FLANGED -RAISED FACE DRILLING AS PER ASME B16.5SERRATED FINISH,WRENCH OPERATED.
155	Supply of LTCS Tripple offset Butterfly Valve: as per attached PTS,Data Sheet, Valve list ,QAP, PMS and PID.
156	250mm dia , HOV Tripple offset Butterfly Valve, ASTM A 352 Gr. LCB, ASME B16.10, CLASS 300, DOUBLE FLANGED AS PER ASME B 16.5 RF, SERRATED FINISH, Gear Operated
157	300mm dia , HOV Tripple offset Butterfly Valve, ASTM A 352 Gr. LCB, ASME B16.10, CLASS 300, DOUBLE FLANGED AS PER ASME B 16.5 RF, SERRATED FINISH, Gear Operated
158	Supply of LTCSSolenoid operated Tripple offset Butterfly shutdown Valve solenoid operated: as per attached PTS,Data Sheet, Valve list ,QAP, PMS and PID.
159	300mm dia , Solenoid operated Tripple offset Butterfly Valve, ASTM A 352 Gr. LCB, ASME B16.10, CLASS 300, DOUBLE FLANGED AS PER ASME B 16.5 RF, SERRATED FINISH
160	Supply of CSCheck Valve: as per attached PTS,Data Sheet, Valve list ,QAP, PMS and PID.
161	100 mm dia ,SWING CHECK VALVE, ASTM A216 GR WCB, ASME B16.34, ASME B16.10, CLASS 150, FLANGED -RAISED FACE DRILLING AS PER ASME B16.5.
162	Supply of LTCSCheck Valve : as per attached PTS,Data Sheet, Valve list ,QAP, PMS and PID.
163	50mm dia , SWING CHECK VALVE,ASTM A 352 Gr. LCB, ASME B16.10, ASME 16.34 & BS1873, CLASS 300, FLANGED -RAISED FACE DRILLING AS PER ASME B16.5, SERRATED FINISH
164	150mm dia , SWING CHECK VALVE,ASTM A 352 Gr. LCB, ASME B16.10, ASME 16.34 & BS1873, CLASS 300, FLANGED -RAISED FACE DRILLING AS PER ASME B16.5, SERRATED FINISH
165	250mm dia , SWING CHECK VALVE,ASTM A 352 Gr. LCB, ASME B16.10, ASME 16.34 & BS1873, CLASS 300, FLANGED -RAISED FACE DRILLING AS PER ASME B16.5, SERRATED FINISH
166	Supply ofLTCS Globe Valve: as per attached PTS,Data Sheet, Valve list ,QAP, PMS and PID.
167	20 mm HOV GLOBE VALVE,ASTM A 352 Gr. LCB, ASME B16.10, ASME 16.34 & BS 1873, CLASS 300, FLANGED -RAISED FACE DRILLING AS PER ASME B16.5 SERRATED FINISH, HANDWHEEL
168	25 mm HOV GLOBE VALVE,ASTM A 352 Gr. LCB, ASME B16.10, ASME 16.34 & BS 1873, CLASS 300, FLANGED -RAISED FACE DRILLING AS PER ASME B16.5 SERRATED FINISH, HANDWHEEL
169	50 mm HOV GLOBE VALVE,ASTM A 352 Gr. LCB, ASME B16.10, ASME 16.34 & BS 1873, CLASS 300, FLANGED -RAISED FACE DRILLING AS PER ASME B16.5 SERRATED FINISH, HANDWHEEL
170	300 mm HOV GLOBE VALVE,ASTM A 352 Gr. LCB, ASME B16.10, ASME 16.34 & BS 1873, CLASS 300, FLANGED -RAISED FACE DRILLING AS PER ASME B16.5 SERRATED FINISH, HANDWHEEL
171	Supply ofLTCS Flanged Thermal Releif valves: as per attached PTS,Data Sheet, Valve list ,QAP, PMS and PID.
172	20NB X 25NB, TRV,A351 Gr CF8, ASME B16.34, ASME SEC VIII DIV I, ASME B16.10, CLASS 300, FLANGED -RAISED FACE DRILLING AS PER ASME B16.5 INLET CLASS 300& OUTLET CLASS 150.
173	CONDENSATE TRANSFER PUMPS : as per attached PTS,Data Sheet,QAP and PID.
174	Supply, Erection, Testing and Commissioning of Horizontal centrifugalPumpwith electric motor and allothers accessories as per attached Pump Datasheet (50m3/hr & 30 M head)
175	Supply of following flanges conforming to ASTM A- 105 (Galvanised);
176	15 NB FLANGE, SWRF, ASTM A 105 (Galvanized), ASME B16.5, CLASS 150, SERRATED FINISH
177	20 NB FLANGE, SWRF, ASTM A 105 (Galvanized), ASME B16.5, CLASS 150, SERRATED FINISH
178	25 NB FLANGE, SWRF, ASTM A 105 (Galvanized), ASME B16.5, CLASS 150, SERRATED FINISH
179	50 NB FLANGE,SORF, ASTM A 105 (Galvanized), ASME B16.5, CLASS 150, SERRATED FINISH
180	65 NB FLANGE,WNRF, ASTM A 105 (Galvanized), ASME B16.5, CLASS 150, SERRATED FINISH
181	80 NB FLANGE, WNRF, ASTM A 105 (Galvanized), ASME B16.5, CLASS 150, SERRATED FINISH
182	100 NB FLANGE, SORF, ASTM A 105 (Galvanized), ASME B16.5, CLASS 150, SERRATED FINISH
183	150 NBFLANGE, SORF, ASTM A 105 (Galvanized), ASME B16.5, CLASS 150, SERRATED FINISH
184	Supply of following flanges (WNRF/SWRF) conforming to ASTM A350 LF2
185	20 NB FLANGE, SWRF, ASTM A350 LF2, ASME B16.5, CLASS 150, SW - ASME B16.25,S-160, SERRATED FINISH
186	20 NB FLANGE, SWRF, ASTM A350 LF2, ASME B16.5, CLASS 300, SW - ASME B16.25,S-160, SERRATED FINISH
187	25 NB FLANGE, SWRF, ASTM A350 LF2, ASME B16.5, CLASS 150, SW - ASME B16.25,S-80, SERRATED FINISH
188	25 NB FLANGE, SWRF, ASTM A350 LF2, ASME B16.5, CLASS 300, SW - ASME B16.25,S-80, SERRATED FINISH
189	40 NBFLANGE, WNRF, ASTM A350 LF2, ASME B16.5, CLASS 300, BW- ASME B16.25,S-80, SERRATED FINISH
190	50 NBFLANGE, WNRF, ASTM A350 LF2, ASME B16.5, CLASS 150, BW- ASME B16.25,S-80, SERRATED FINISH
191	50 NBFLANGE, WNRF, ASTM A350 LF2, ASME B16.5, CLASS 300, BW- ASME B16.25,S-80, SERRATED FINISH
192	80 NBFLANGE, WNRF, ASTM A350 LF2, ASME B16.5, CLASS 300, BW- ASME B16.25,S-40, SERRATED FINISH
193	100 NBFLANGE, WNRF, ASTM A350 LF2 LF2, ASME B16.5, CLASS 300, BW- ASME B16.25,S-40, SERRATED FINISH
194	150 NBFLANGE, WNRF, ASTM A350 LF2, ASME B16.5, CLASS 300, BW- ASME B16.25,S-40, SERRATED FINISH
195	200 NBFLANGE, WNRF, ASTM A350 LF2, ASME B16.5, CLASS 300, BW- ASME B16.25,S-40, SERRATED FINISH
196	250 NBFLANGE, WNRF, ASTM A350 LF2, ASME B16.5, CLASS 300, BW- ASME B16.25,S-40, SERRATED FINISH
197	300 NBFLANGE, WNRF, ASTM A350 LF2, ASME B16.5, CLASS 300, BW- ASME B16.25,S-40, SERRATED FINISH
198	Supply of following flanges (WNRF/SWRF/SORF/THRD-RF) conforming to ASTM A105
199	25 NB FLANGE, SWRF, ASTM A105, ASME B16.5, CLASS 300, SW -ASME B16.25, S-80, SERRATED FINISH
200	50 NB FLANGE, WNRF, ASTM A105, ASME B16.5, CLASS 300, BW- ASME B16.25,S-STD, SERRATED FINISH
201	100 NB FLANGE, WNRF, ASTM A105, ASME B16.5, CLASS 300, BW- ASME B16.25,S-STD, SERRATED FINISH
202	Supply of following flanges (BLRF) conforming to ASTM A350 LF2, ASTM A- 105
203	20 NBFLANGE, BLRF, ASTM A350 LF2, ASME B16.5, CLASS 150, FLGD, SERRATED FINISH
204	20 NBFLANGE, BLRF, ASTM A350 LF2, ASME B16.5, CLASS 300, FLGD, SERRATED FINISH
205	25 NBFLANGE, BLRF, ASTM A350 LF2, ASME B16.5, CLASS 150, FLGD, SERRATED FINISH
206	25 NBFLANGE, BLRF, ASTM A350 LF2, ASME B16.5, CLASS 300, FLGD, SERRATED FINISH
207	50 NBFLANGE, BLRF, ASTM A350 LF2, ASME B16.5, CLASS 150, FLGD, SERRATED FINISH
208	50 NBFLANGE, BLRF, ASTM A350 LF2, ASME B16.5, CLASS 300, FLGD, SERRATED FINISH
209	150 NBFLANGE, BLRF, ASTM A350 LF2, ASME B16.5, CLASS 300, FLGD, SERRATED FINISH
210	250 NBFLANGE, BLRF,ASTM A350 LF2, ASME B16.5, CLASS 300, FLGD, SERRATED FINISH
211	300 NBFLANGE, BLRF, ASTM A350 LF2, ASME B16.5, CLASS 300, FLGD, SERRATED FINISH
212	25 NBFLANGE, BLRF, ASTM A105, ASME B16.5, CLASS 300, FLGD, SERRATED FINISH
213	50 NBFLANGE, BLRF, ASTM A105, ASME B16.5, CLASS 300, FLGD, SERRATED FINISH
214	100 NBFLANGE, BLRF, ASTM A105, ASME B16.5, CLASS 150, FLGD, SERRATED FINISH
215	20 NBFLANGE, BLRF, ASTM A 105 (Galvanized), ASME B16.5, CLASS 150, SERRATED FINISH
216	25 NBFLANGE, BLRF, ASTM A 105 (Galvanized), ASME B16.5, CLASS 150, SERRATED FINISH
217	50 NBFLANGE, BLRF,ASTM A 105 (Galvanized), ASME B16.5, CLASS 150, SERRATED FINISH
218	100 NBFLANGE, BLRF,ASTM A 105 (Galvanized), ASME B16.5, CLASS 150,SERRATED FINISH
219	PIPEFITTINGS : Supplying the following sizes of Elbows/ Tees/ Reducer made of LTCS/ CS seamless pipes with PE/BE as per enclosed specifications for the following sizes Note: The Material and Schedule shall be as per PMSNote: The quantities given are only indicative.The actual quantities to be supplied will be based on the finalised drawing for pipeline routing.90 Deg LR elbow (1.5D)
220	20 NB, ELBOW, 90 DEG., ASTM A350 LF2, ASME B16.11, Class 6000, SWSEAMLESS
221	25 NB, ELBOW, 90 DEG., ASTM A350 LF2, ASME B16.11, Class 3000, SWSEAMLESS
222	50NB Elbow 90°, LR (R=1.5D), ASTM A420 WPL6, ASME B16.9, SCH 80, BW – ASME B16.25, Seamless
223	80 NB,ELBOW, 90 DEG., LR (R=1.5D), ASTM A234 Gr.WPB, ASME B16.9, S-40, BE-ASME B16.25, SEAMLESS
224	150 NB,ELBOW, 90DEG., LR (R=1.5D), ASTM A 420 – WPL6, ASME B16.9, S-40, BE-ASME B16.25, SEAMLESS
225	250 NB,ELBOW, 90DEG., LR (R=1.5D), ASTM A 420 – WPL6, ASME B16.9, S-40, BW-ANSI B16.25, SEAMLESS
226	300 NB,ELBOW, 90DEG., LR (R=1.5D), ASTM A 420 – WPL6, ASME B16.9, S-40, BW-ANSI B16.25, SEAMLESS
227	25NB, ELBOW, 90 DEG., LR (R=1.5D), ASTM A105, ASME B16.11, SW - ASME B16.25, CLASS 3000SEAMLESS
228	50 NB, ELBOW, 90 DEG.LR (R=1.5D), ASTM A234 Gr. WPB, ASME B16.9, S-STD, BW - ASME B16.25, SEAMLESS
229	100 NB, ELBOW, 90 DEG..LR (R=1.5D), ASTM A234 Gr. WPB, ASME B16.9, S-STD, BW - ASME B16.25, SEAMLESS
230	15NB, ELBOW, 90 DEG., ASTM A105 (Galvanized) - ASME B16.11, SW - ASME B16.25, CLASS 3000SEAMLESS
231	25NB, ELBOW, 90 DEG., ASTM A105 (Galvanized) - ASME B16.11, SW - ASME B16.25, CLASS 3000SEAMLESS
232	50NB, ELBOW, 90 DEG., ASTM A105 (Galvanized) - ASME B16.11, SW - ASME B16.25, CLASS 3000SEAMLESS
233	100 NB,ELBOW, 90DEG., LR (R=1.5D), ASTM A234 Gr. WPB (Galvanized), ASME B16.9, S-STD, BW - ASME B16.25, SEAMLESS
234	150 NB,ELBOW, 90DEG., LR (R=1.5D), ASTM A234 Gr. WPB (Galvanized), ASME B16.9, S-STD, BW - ASME B16.25, SEAMLESS
235	PIPEFITTINGS : Supplying the following sizes of Elbows/ Tees/ Reducer made of LTCS/ CS/GI as per enclosed specifications for the following sizes Note: The Material and Schedule shall be as per PMSNote: The quantities given are only indicative.The actual quantities to be supplied will be based on the finalised drawing for pipeline routing.45 Deg LR elbow (1.5D)
236	20 NB, ELBOW, 45 DEG., ASTM A350 LF2, ASME B16.11, Class 6000, SWSEAMLESS
237	25 NB, ELBOW, 45 DEG., ASTM A350 LF2, ASME B16.11, Class 3000, SWSEAMLESS
238	50NB Elbow 45°, LR (R=1.5D), ASTM A420 WPL6, ASME B16.9, SCH 80, BW – ASME B16.25, Seamless
239	80 NB,ELBOW, 45 DEG., LR (R=1.5D), ASTM A234 Gr.WPB, ASME B16.9, S-40, BE-ASME B16.25, SEAMLESS
240	150 NB,ELBOW, 45DEG., LR (R=1.5D), ASTM A 420 – WPL6, ASME B16.9, S-40, BE-ASME B16.25, SEAMLESS
241	250 NB,ELBOW, 45DEG., LR (R=1.5D), ASTM A 420 – WPL6, ASME B16.9, S-40, BW-ANSI B16.25, SEAMLESS
242	300 NB,ELBOW, 45DEG., LR (R=1.5D), ASTM A 420 – WPL6, ASME B16.9, S-40, BW-ANSI B16.25, SEAMLESS
243	25NB, ELBOW, 45 DEG., LR (R=1.5D), ASTM A105, ASME B16.11, SW - ASME B16.25, CLASS 3000SEAMLESS
244	50NB, ELBOW, 45 DEG.LR (R=1.5D), ASTM A234 Gr. WPB, ASME B16.9, S-STD, BW - ASME B16.25, SEAMLESS
245	100 NB, ELBOW, 45 DEG..LR (R=1.5D), ASTM A234 Gr. WPB, ASME B16.9, S-STD, BW - ASME B16.25, SEAMLESS
246	15NB, ELBOW, 45 DEG., ASTM A105 (Galvanized) - ASME B16.11, SW - ASME B16.25, CLASS 3000SEAMLESS
247	25NB, ELBOW, 45 DEG., ASTM A105 (Galvanized) - ASME B16.11, SW - ASME B16.25, CLASS 3000SEAMLESS
248	50NB, ELBOW, 45 DEG., ASTM A105 (Galvanized) - ASME B16.11, SW - ASME B16.25, CLASS 3000SEAMLESS
249	80NB, ELBOW, 45 DEG., LR (R=1.5D), ASTM A234 Gr. WPB (Galvanized), ASME B16.9, S-STD, BW - ASME B16.25, SEAMLESS
250	100 NB, ELBOW, 45 DEG., LR (R=1.5D), ASTM A234 Gr. WPB (Galvanized), ASME B16.9, S-STD, BW - ASME B16.25, SEAMLESS
251	PIPEFITTINGS : Supplying the following sizes of Elbows/ Tees/ Reducer made of carbon steel seamless pipes with bevelled ends as per enclosed specifications for the following sizes Note: The Material and Schedule shall be as per PMSNote: The quantities given are only indicative.The actual quantities to be supplied will be based on the finalised drawing for pipeline routing.Equal Tee
252	20NB Equal Tee, ASTM A350 LF2, ASME B16.11, Class 6000, SW, Seamless
253	25NB Equal Tee, ASTM A350 LF2, ASME B16.11, Class 3000, SW, Seamless
254	50NB Equal Tee, ASTM A420 WPL6, ASME B16.9, SCH 80, BE – ASME B16.25, Seamless
255	150 NB EQUAL TEE,ASTM A 420 – WPL6, ASME B16.9, S-40, BE-ASME B16.25, SEAMLESS
256	250 NB EQUAL TEE,ASTM A 420 – WPL6, ASME B16.9, S-40, BE-ASME B16.25, SEAMLESS
257	300 NB EQUAL TEE,ASTM A 420 – WPL6 ASME B16.9, S-40, BE-ASME B16.25, SEAMLESS
258	25NB EQUAL TEE, ASTM A105, ASME B16.11, CLASS 3000, SW -ASME B16.11, SEAMLESS
259	50NB EQUAL TEE, ASTM A234 Gr.WPB, ASME B16.9, S-80, BW-ASME B16.25, SEAMLESS
260	100 NB EQUAL TEE, ASTM A234 Gr.WPB, ASME B16.9, S-40, BW-ASME B16.25, SEAMLESS
261	25NB EQUAL TEE, ASTM A105 (Galvanised), ASME B16.11, CLASS 3000, SW
262	50NB EQUAL TEE, ASTM A105 (Galvanised), ASME B16.11, CLASS 3000, SW
263	100 NB EQUAL TEE, ASTM A234 Gr.WPB (Galvanised), ASME B16.9, S-40, BW-ASME B16.25, SEAMLESS
264	PIPEFITTINGS : Supplying &installation the following sizes of Elbows/ Tees/ Reducer made of carbon steel seamless pipes with bevelled ends as per enclosed specifications for the following sizes Note: The Material and Schedule shall be as per PMSNote: The quantities given are only indicative.The actual quantities to be supplied will be based on the finalised drawing for pipeline routing.Un Equal Tee
265	25NB x 20NB Reducing Tee, ASTM A420 WPL6, ASME B16.9, SCH 80 x SCH 160, BE, Seamless
266	50NB x 20NB Reducing Tee, ASTM A420 WPL6, ASME B16.9, SCH 80 x SCH 160, BE, Seamless
267	50NB x 25NB Reducing Tee, ASTM A420 WPL6, ASME B16.9, SCH 80 x SCH 80, BE, Seamless
268	80NB x 50NB,REDUCING TEE, ASTM A 420 – WPL6, ASME B16.9, S-40 x S-80, BE-ASME B16.25, SEAMLESS
269	100NB x 80NB,REDUCING TEE, ASTM A 420 – WPL6, ASME B16.9, S-40 x S-40, BE-ASME B16.25, SEAMLESS
270	100NB x 50NB,REDUCING TEE, ASTM A 420 – WPL6, ASME B16.9, S-40 x S-80, BE-ASME B16.25, SEAMLESS,
271	150NB x 100NB,REDUCING TEE,ASTM A 420 – WPL6, ASME B16.9, S-40 x S-40, BW-ASME B16.25, SEAMLESS
272	150NB x 80NB,REDUCING TEE,ASTM A 420 – WPL6, ASME B16.9, S-40 x S-40, BE-ASME B16.25, SEAMLESS
273	200NB x 100NB,REDUCING TEE,ASTM A 420 – WPL6, ASME B16.9, S-40 x S-40, BW-ASME B16.25, SEAMLESS
274	250NB x 100NB,REDUCING TEE,ASTM A 420 – WPL6, ASME B16.9, S-40 x S-40, BW-ASME B16.25, SEAMLESS
275	250NB x 150NB,REDUCING TEE,ASTM A 420 – WPL6, ASME B16.9, S-40 x S-40, BW-ASME B16.25, SEAMLESS
276	300NB x 150NB,REDUCING TEE,ASTM A 420 – WPL6, ASME B16.9, S-40 x S-40, BW-ASME B16.25, SEAMLESS
277	300NB x 200NB,REDUCING TEE,ASTM A 420 – WPL6, ASME B16.9, S-40 x S-40, BW-ASME B16.25, SEAMLESS
278	300NB x 250NB,REDUCING TEE,ASTM A 420 – WPL6, ASME B16.9, S-40 x S-40, BW-ASME B16.25, SEAMLESS
279	50NB x 25NB REDUCING TEE,A234-WPB, ASME B16.9, S-STD x S-80, BE-ASME B16.25, SEAMLESS
280	100NB x 50NB,REDUCING TEE, A234-WPB, ASME B16.9, S-STD x S-STD, BE-ASME B16.25, SEAMLESS
281	100NB x 80NB,REDUCING TEE, A234-WPB, ASME B16.9, S-STD x S-STD, BE-ASME B16.25, SEAMLESS
282	20NB x 15NB REDUCING TEE, ASTM A105 (Galvanised), ASME B16.11, CLASS 3000, SWE
283	25NB x 15NB REDUCING TEE, ASTM A105 (Galvanised), ASME B16.11, CLASS 3000, SWE
284	50NB x 15NB Reducing Tee, ASTM A105 (Galvanised), ASME B16.11, CLASS 3000, SWE
285	50NB x 25NB Reducing Tee, ASTM A105 (Galvanised), ASME B16.11, CLASS 3000, SWE
286	80NB x 50NB Reducing Tee, ASTM A234 Gr. WPB (Galvanized), ASME B16.9, Compatible with IS 1239 Part-I (Heavy Grade) Pipe, BE – ASME B16.25, Seamless
287	PIPEFITTINGS : Supplying & Installation the following sizes of Elbows/ Tees/ Reducer made of carbon steel seamless pipes with bevelled ends as per enclosed specifications for the following sizes Note: The Material and Schedule shall be as per PMSNote: The quantities given are only indicative.The actual quantities to be supplied will be based on the finalised drawing for pipeline routing.Reducers (Concentric)
288	25 NB X 20NB, CONCENTRIC REDUCER, ASTM A 420 – WPL6, ASME B16.9, S-80 x S-160, BW-ASME B16.25 SEAMLESS,
289	200NB X 150NB,CONCENTRIC REDUCER, ASTM A 420 – WPL6, ASME B16.9, S-40 x S-40, BW-ASME B16.25 SEAMLESS
290	100NB X 80NB, CONCENTRIC REDUCER, ASTM A234 Gr.WPB, ASME B16.9, S-STD x S-STD, BW-ASME B16.25 SEAMLESS,
291	100NB X 65NB, CONCENTRIC REDUCER, ASTM A234 Gr.WPB, ASME B16.9, S-STD x S-STD, BW-ASME B16.25 SEAMLESS,
292	PIPEFITTINGS : Supplying & installation the following sizes of Elbows/ Tees/ Reducer made of carbon steel seamless pipes with bevelled ends as per enclosed specifications for the following sizes Note: The fittings shall be as per ASTM A 234 Grade WPB schedule 40 and dimensions as per ASME B 16.5.Note: The quantities given are only indicative.The actual quantities to be supplied will be based on the finalised drawing for pipeline routing.Reducers (Eccentric)
293	50 NB X 25NB, ECCENTRIC REDUCER, ASTM A 420 – WPL6, ASME B16.9, S-80 x S-80, BW-ASME B16.25 SEAMLESS,
294	150NB X 80NB, ECCENTRIC REDUCER, ASTM A 420 – WPL6, ASME B16.9, S-40 x S-40, BW-ASME B16.25 SEAMLESS
295	150NB X 100NB, ECCENTRIC REDUCER, ASTM A 420 – WPL6, ASME B16.9, S-40 x S-40, BW-ASME B16.25 SEAMLESS
296	250NB X 150NB, ECCENTRIC REDUCER, ASTM A 420 – WPL6, ASME B16.9, S-40 x S-40, BW-ASME B16.25 SEAMLESS
297	300NB X 150NB, ECCENTRIC REDUCER, ASTM A 420 – WPL6, ASME B16.9, S-40 x S-40, BW-ASME B16.25 SEAMLESS
298	300NB X 250NB, ECCENTRIC REDUCER, ASTM A 420 – WPL6, ASME B16.9, S-40 x S-40, BW-ASME B16.25 SEAMLESS
299	300NB X 200NB, ECCENTRIC REDUCER, ASTM A 420 – WPL6, ASME B16.9, S-40 x S-40, BW-ASME B16.25 SEAMLESS
300	25NB x 15NB ECCENTRICC REDUCER, ASTM A105 (Galvanised), ASME B16.11, CLASS 3000, SW
301	50NB x 25NB ECCENTRIC REDUCER, ASTM A105 (Galvanised), ASME B16.11, CLASS 3000, SW
302	100NB X 80NB, ECCENTRIC REDUCER, ASTM A234 Gr.WPB (Galvanised),ASME B16.9, S-STD x S-STD, BW-ASME B16.25 SEAMLESS,
303	150NB X 100NB, ECCENTRIC REDUCER, ASTM A234 Gr.WPB,(Galvanised) ASME B16.9, S-STD x S-STD, BW-ASME B16.25 SEAMLESS,
304	PIPEFITTINGS : Supplying & Installation the following sizes of Weldolet made of LTCSNote: The quantities given are only indicative.The actual quantities to be supplied will be based on the finalised drawing for pipeline routing.Weldolet
305	40NB WELDOLET, ASTM A350 LF2, MSS SP 97, S-80,BW - ANSI B16.25
306	50NB WELDOLET, ASTM A350 LF2, MSS SP 97, S-40,BW - ANSI B16.25
307	80NB WELDOLET, ASTM A350 LF2, MSS SP 97, S-40,BW - ANSI B16.25
308	100NB WELDOLET,ASTM A350 LF2, MSS SP 97, S-40,BW - ANSI B16.25
309	PIPEFITTINGS : Supplying & Installation the following sizes of sockolet made of LTCS & CSNote: The quantities given are only indicative.The actual quantities to be supplied will be based on the finalised drawing for pipeline routing.sockolet
310	15NB SOCKOLET,ASTM A350 LF2, MSS SP 97, CLASS 6000, SW - ANSI B16.11
311	20NB SOCKOLET, ASTM A350 LF2, MSS SP 97, CLASS 6000, SW - ANSI B16.11
312	25NB SOCKOLET, ASTM A350 LF2, MSS SP 97, CLASS 3000, SW - ANSI B16.11
313	25NB SOCKOLET, ASTM A105, MSS SP 97, CLASS 3000, SW - ANSI B16.11
314	15NB SOCKOLET, ASTM A105 (Galvanised), MSS SP 97, CLASS 3000, SW-ANSI B16.11
315	20NB SOCKOLET, ASTM A105 (Galvanised), MSS SP 97, CLASS 3000, SW-ANSI B16.11
316	25NB SOCKOLET, ASTM A105 (Galvanised), MSS SP 97, CLASS 3000, SW-ANSI B16.11
317	PIPEFITTINGS : Supplying & Installation the following sizes of FULL COUPLING made of CS/LTCS/GINote: The quantities given are only indicative.The actual quantities to be supplied will be based on the finalised drawing for pipeline routing.FULL COUPLING
318	20 NB, FULL COUPLING, SWE , ASTM A350 LF2, SW, CLASS 6000, ASME B16.11
319	25 NB, FULL COUPLING, SWE , ASTM A350 LF2, SW, CLASS 3000, ASME B16.11
320	20NB, FULL COUPLING, SWE , ASTM A105 , ASME B16.11 ,CLASS 3000
321	25 NB, FULL COUPLING, SWE , ASTM A105 , ASME B16.11 ,CLASS 3000
322	25 NB, FULL COUPLING, SWE , ASTM A105(Galvanized),SW ,CLASS 3000,ASME B16.11
323	PIPEFITTINGS : Supplying & Installation the following sizes of CAP made of CS / LTCS/GINote: The quantities given are only indicative.The actual quantities to be supplied will be based on the finalised drawing for pipeline routing.CAP
324	20NB, CAP, ASTM A350 LF2, THD, CLASS 6000, ASME B16.11
325	25NB, CAP,ASTM A350 LF2, THD, CLASS 3000, ASME B16.11
326	25NB, CAP,ASTM A105,SWE ,CLASS 3000,ASME B16.11
327	15NB, CAP,ASTM A105 (Galvanized),THD ,CLASS 3000,ASME B16.11
328	20NB, CAP,ASTM A105 (Galvanized),THD ,CLASS 3000,ASME B16.11
329	PROCUREMENT & SUPPLY & INSTALLATION OF NIPPLES
330	LTCS Nipple,Material: ASTM A333 Gr.6 Seamless, As per BS-3799, 100mm Long
331	20 NB, SCH.160, PLN-THD
332	25 NB, SCH.80, PLN-THD
333	CS Nipple,Material: A106 GR.B Seamless, As per BS-3799, 100mm Long
334	15 NB, SCH.80, PLN-THD, Galvanised
335	20 NB, SCH.80, PLN-THD, Galvanised
336	SPECTACLE Blind
337	25 NB SPECTACLE blind, ASTM A350 LF2, ASME B16.5, CLASS 300, FLGD, SERRATED FINISH
338	COLD INSULATION for product piping:Supply, fabrication, erection, testing and commissioning of cold insulation,outer layer vapour/moisture barrier and Aluminium cladding for the following items asTECHNICAL SPECIFICATION FOR COLD INSULATION DOCUMENT NO. W.004412-G-11077-P017.Note: 1. Insulation area shall be measured from OD of pipe with insulation thickness2. \"Cost include insulation of pipe, fittings & flanges, valves, other components also.
339	15 NB pipe, insulation thickness 55mm
340	20 NB pipe, insulation thickness 55mm
341	25 NBpipe, insulation thickness 55mm
342	40 NBpipe, insulation thickness 55mm
343	50 NBpipe, insulation thickness 70mm
344	80 NBpipe, insulation thickness 80mm
345	100 NBpipe, insulation thickness 80mm
346	150 NB pipe, insulation thickness 90mm
347	200 NB pipe, insulation thickness 95mm
348	250 NB pipe, insulation thickness 100mm
349	300 NB pipe, insulation thickness 105mm
350	FIRE PROTECTION SYSTEMSCHEDULE OF SUPPLY RATES (AS PER TECHNICAL SPECIFICATION REQUIREMENT)SUPPLY ITEMSGeneral Notes:a. All supply items shall be quoted as per technical specification & BoQ description for supply to site including charges towards TPI, packing & forwarding, loading, transportation, transit insurance, unloading, stacking at site. b. Third party inspection (TPI) for the supply items shall be in scope of successfullbidder. c. Approval of TPI agency to be engaged for inspection of material shall be obtained from IPPL on award of contract to sucessfull Bidder.d. Clearance of all materials shall be based on compliance to Technical Specifications, approved makes and as per agreed/approved Quality Assurance Plan (QAP) to besubmitted by sucessfull bidder after award of contract for approval of IPPL.
351	PROCUREMENT & SUPPLY OF (MS)PIPES Supply of MS Black ERW Pipes confirming to IS 3589, Gr.410 ERW (Bevel end ) of following sizes.
352	PIPE,IS 3589 Gr. 410, 400NB,S-20,BE,ERW
353	PIPE,IS 3589 Gr. 410, 300NB,S-20,BE,ERW
354	Supply of MS Black ERW Pipes confirming to IS 1239 (Part-1) Heavy Grade (Bevel end for 50 mm & above, Plain end for 40 mm & below) of following sizes.
355	150 mm NB, Wall thickness 5.4 mm
356	100 mm NB, Wall thickness 5.4 mm
357	25 mm NB, Wall thickness 4.0 mm
358	PROCUREMENT & SUPPLY OF PIPEFITTINGSNote: The quantities given are only indicative. The actual quantities to be supplied will be based on the finalized drawing for pipeline routing, as per site requirements and to be approved by the site engineer.
359	400 NB, Elbow-90 Deg, Sch-20, B-16.9 , ASTM A 234 GR.WPB, BW, 1.5D
360	300 NB, Elbow-90 Deg, Sch-20, B-16.9 , ASTM A 234 GR.WPB, BW, 1.5D
361	150 NB, Elbow-90 Deg, Sch-20, B-16.9 , ASTM A 234 GR.WPB, BW, 1.5D
362	100 NB, Elbow-90 Deg, Sch-20, B-16.9 , ASTM A 234 GR.WPB, BW, 1.5D
363	25 NB, Elbow-90 Deg, B-16.11 , ASTM A 105, SW, #3000
364	25 NB, Elbow-45 Deg, Sch-M, B-16.9 , ASTM A 234 GR.WPB, BW, 1.5D
365	25 NB, Equal Tee, B-16.11 , ASTM A 105, SW, #3000
366	300 NB, Equal Tee, Sch-20, B-16.9 , ASTM A 234 GR.WPB, BW
367	300 x 150 NB, Reducing Tee, Sch-20, B-16.9 , ASTM A 234 GR.WPB, BW
368	400 x 300 NB, Reducing Tee, Sch-20, B-16.9 , ASTM A 234 GR.WPB, BW
369	400 x 100 NB, Reducing Tee, Sch-20, B-16.9 , ASTM A 234 GR.WPB, BW
370	300 x 100 NB, Reducing Tee, Sch-20, B-16.9 , ASTM A 234 GR.WPB, BW
371	Supply of RF Flange, 125 AARH as per ASTM A105 DIM. ASME B16.5 Class 150 of following sizes
372	400 NB, Sch - STD-20
373	300 NB, Sch - STD-20
374	100 NB, Sch - STD-20
375	25 NB, Sch - STD-20
376	PROCUREMENT & SUPPLY OF MANUAL GATE VALVES (HAND WHEEL OPERATED)
377	25NB, BODY ASTM 216 Gr. WCB, TRIM-13% CR STEEL, B16.5, FLG-RF/125AARH, 150#.
378	PROCUREMENT & SUPPLY OF MANUAL BUTTERFLY VALVES (HAND WHEEL OPERATED)
379	400NB, BODY CS ASTM 216 Gr. WCB, TRIM-13% CR STEEL, B16.5, FLG-RF/125AARH, 150#.
380	100NB, BODY CS ASTM 216 Gr. WCB, TRIM-13% CR STEEL, B16.5, FLG-RF/125AARH, 150#.
381	Procurement & Supply of hose pipes, hose box, branch pipes & nozzles etc. as per relevant specifications including supply of studs-nuts & washers etc. All Items shall be covered in the unit rate quoted.
382	HOSE PIPERRL hose pipe reel, 15 M long, 63 mm Dia as per IS 636 Type A, complete with male-female SS coupling as per IS 903 and material as per TDS.
383	HOSE BOXFRP hose box of size 750 X 600 X 250 mm with structural support for mounting the box at minimum 1 M above the ground level including grouting the post complete.Inside should be painted in white colorNote: The fabrication & erection of hose box stand shall be measured & paid seperately under civil items.
384	BRANCH PIPE & NOZZLEMaterial conforming to IS 3444 Gr.4 / SS 316 branch pipe as per IS 903 with nozzle.Jet type nozzle, 10 Bar, 450LPM @7kg/cm2
385	Procurement & Supply of portable fire extinguishers as per relevant specifications including supply of brackets / fittings suitable for mounting on wall and a carrying handle of ample strength. Moreover,100% spare CO2 cartridges and 50% spare DCP bags shall be provided.
386	9 Kg DCP Fire Extinguisher (Gas Cartridge type)
387	4.5 Kg CO2 Fire Extinguisher
388	Sand Buckets with stand - 4 Buckets per set
389	SCHEDULE OF RATES FOR FABRICATION, ERECTION, TESTING & COMMISSIONING OF HYDRANT PIPELINE WORKS(AS PER TECHNICAL SPECIFICATION REQUIREMENT)ERECTION OF PIPING WORK (ABOVEGROUND & UNDER GROUND)TheErectionincludeserectionofpipes,fittings,flanges,stud-nut, gasket, reinforcing pads etc. Transportation of all piping elements from storage point to work site/shop including, cleaning, stacking, prefabrication/ fabrication at shop and/or site, erection, joining by threading, bolting, welding, hydro testing, flushing and blowing, seal/leak testing and making ready for commissioning as per drawings, specifications,standards,codes,instructionofOWNER/OWNER\"srepresentative and scope of work defined in Tender. RM length for payment will be taken considering pipes & fittlings centre line.For Above ground piping complete with RCC support, flanges, nuts bolts , gaskets hydrotest, painting etc as per specification. Cost of RCC/Other supports will be paid separately as per civil SOR item. Item also incluses provision of Saddle/Corrosion plates on Fire Hydrant Pipe Lines over pedestals including cutting and fabrication of saddle plates from supplied MS pipes and welding of the same on pipelines under pedestals.
390	RadiographyNote:1. 4\" wide film shall be used Upto 50 NB dia pipes.2. 3” wide film shall be used above 50 NB dia pipes.
391	400 NB
392	300 NB
393	150 NB
394	100 NB
395	25 NB
396	Installation of Pipes
397	PIPE,IS 3589 Gr. 410, 400NB,S-20,BE,ERW
398	PIPE,IS 3589 Gr. 410, 300NB,S-20,BE,ERW
399	150 mm NB, Wall thickness 5.4 mm
400	100 mm NB, Wall thickness 5.4 mm
401	25 mm NB, Wall thickness 4.0 mm
402	INSTALLATION / FIXING / ERECTION OF FLANGED / SCREWED/ WAFER TYPE/ SOCKET WELDED VALVES , STRAINERSOF ALL MATERIALS & ALL RATINGSFixing supplied Carbon steel/ Stainless steel / GATE VALVE/ GLOBE VALVE/ NRV/ BALL VALVES/ BUTTERFLY VALVE/ CHECK VALVE / STRAINER/ PSV of the following sizes on the pipeline including supplying and fixing 3 mm thk gaskets, nuts, stud bolts, washersof approved make, all leads & lifts etc., complete as per specifications and instructions at site.Note: a) Painting with approved make, colour, shade including colour coding as per specifications.b) The valves shall be supplied anywhere within the premises and the contractor shall undertake to lead the same to the foundations at no extra cost. c. Item includes supply & providing 8 SWG bare Cu wire for bonding between flanges for sizes up to & including 100 mm dia. for firefighting pipelines &32mm - 50mm width Copper Strip (Thickness 3mm) for bonding between flanges for sizes above 100 mm dia.The job includes drilling of holes in the Cu strips for bolting purposes as per drawing, all leads & lifts etc., complete as per specifications and instructions at site.Transportation from OWNER/ VENDOR’S stores/storage points to shop/site, installation in position by threading, bolting or welding as per drawings, specifications, standards/ codes, instructions of Owner /Owner\"s representative and scope of work defined in NIT alongwith supply of necessary stud-nuts, washers, gaskets (with 100% SPARE QUANTITY). Rates shall also include the cost of supply of stud-nuts, washers, gaskets, supervision, labor, overhead /profits, materials in VENDOR\"s scope, Test wherever required, conditions listed in preamble to schedule of rates and other associated arrangements required to execute all the related activities.
403	UPTO 40 NB
404	50 NB to 100 NB sizes
405	150 NB to 400 NB sizes
406	FRP HOSE BOXErection of FRP hose box of size 750 X 600 X 250 mm with structural support for mounting the box at minimum 1 M above the ground level including grouting the post complete.Note: The fabrication & erection of hose box stand shall be measured & paid seperately under civil items.
407	SCHEDULE OF RATES FOR COMPLETE WORKS (SUPPLY CUM EXECUTION INCLUDING COMMISSIONING ALL COMPLETE) (AS PER TECHNICAL SPECIFICATION REQUIREMENT)
408	HYDRANT VALVES, WATER CUM FOAM MONITORS ETC. ALONG WITH COMPANION FLANGES, STUD-NUTS & CONNECTING GASKETSProcurement, Supply, fabrication anderectionofhydrantvalves, monitors etc. including with necessary companion flanges of class 150 rating as per relevant specifications, gaskets (with 100% SPARE QUANTITY), studs-nuts & washers, RF Pad etc. All Items shall be covered in the unit rate quoted for the valves/monitors.SS GASKETS : IS 2712 Gr.W/3, 150#, Flat Ring ASME B16.21STUD-NUTS : A193-B7 / A194-2H, 150#, ANSI B16.5/ B18.2 Heavy Hex
409	DOUBLE HYDRANT VALVE ON A SINGLE STAND POSTSupply & fixing of two numbers single outlet landing valve of size 63 mm diaas per IS:5290, Type-A of SS material including supply and Installation of stand post of size 100 NB with pipe, elbow, cross, RF pad Plate (for pipe to pipe connection) and necessary fittings & flanges including connecting / welding / installing the same in hydrant.NOTE:The Hydrant valve shall be installed with 100 NB isolation butterfly valve. The cost towards supply & installation of butterfly valve and its companion flanges shall be paid under other items.
410	WATER CUM FOAM MONITORSSupply, installation, testing, and commissioning of water monitor having a discharge capacity of 2580 LPM at 6.8 bar, with a maximum rated pressure of 12 bar (175 PSI) and 75 mm (3\") inlet size. The monitor shall be provided with a gunmetal nozzle (without pick-up tube) and complete with 150 NB pipe, elbows, reducer, RF pad plate (for pipe-to-pipe connection), and all necessary fittings and flanges. The scope includes connection, welding, and installation into the existing hydrant network as per approved drawings.NOTE:Monitor shall be installed with 100 NB isolation butterfly valve. The cost towards supply & installation of butterfly valve and its companion flanges shall be paid under other items.
411	SUPPLY & FIXING OF PRESSURE GUAGESupplying and fixing 100 mm dia pressure gage (0-20 KSC) including supplying and welding necessary sockets on the pipelines including 3 way pressure differential valve, etc. complete and as per directions of site in charge.Sensing Element: Diaphragm, Casing: SS 316, Movement: SS 304, Glass: Shatterproof, Dial size: 100 mm, Over range Protection: 1.3 times the max. scale reading, Wetted Parts (including accessories): Minimum – SS 316, Accuracy: + 1.0 % of full scale, Up to + 2.0% of full scale for D.P.gauges, External Zero & span adjustment: Required, Accessories: Syphon for services above 75°C, Snubber for pump discharge applications, Chemical diaphragm for corrosive fluid lines, 2-valve manifold for pressure gauge & 3-valve manifold for differential pressure gauge
412	M.V.W SPRAY SYSTEM FOR AMBIENT AIR HEATING SHEDSupply, shifting to site, laying, threading, welding, fitting, jointing, fabrication, erection, testing, painting and commissioning of MVW spray system, complete with Deluge Valve (Vertical), Nozzles, Detectors, GI pipes, pipe fittings, Valves, Strainers, flanges, nuts & bolts, clampings, structural supports as per technical specifcation/codal requirment, MVW Spray to give desired spray density.Activities Included inUnit Rate: 1) Supply, installation, testing & commissioning of Deluge valve (Vertical), MVW Spray Nozzles, Detectors, GI Pipes, Pipe fittings, Gate valves, Butterfly Valves, Basket type Strainer, Pressure relief valve, Ball valve, Non return valve along with pressure gauge in inlet and outlet of strainer (range shall be 0-25Kg/cm2,150mm dial), flanges, nuts, bolts, washers, gaskets, sockolet, weldolets, consumables and paints as per technical specifcation requirement.2) Transportaion, Unloading & shifting to site and storage.3) Pre-fabrication, handling, cutting, edge preparation, ending, threading, tack welding and final welding as per technical specifcation requirement..4) Installation, alignment, field welding, field tightening as per technical specifcation requirement.5) Supply, fabrication, erection of supports inclusive of U clamps, nut, bolt and special supports from truss/portal/Purlin members of sheds.6) Supply and installation of spray, UL approved make complete with necessary fittings, teflon tape etc.7) Hydro-testing as per technical specification requirement..8) Flushing and system leak test as per technical specifcation requirement.9) Painting as per technical specifcation requirement.10) Tag numbering of spray. All spray shall be provided with 2\" circular identification metalic.Spray No. shall be written on tag by paint.11) Submission of the residual engineering for the firefighting system — including fabrication layouts, equipment datasheets and general arrangement (GA) drawings, along with all related documentation — in full compliance with the requirements of the technical specifications, shall be within the supplier’s scope.The spray shall be properly clamped and bolted as per codes and standard. Pipes and other accessories like Hanger Supports and clamps etc. are to be painted as per the painting specification.
413	Supply, Erection, Fabrication, Installation, Testing, Painting and Commissioning of C.S. deluge valve system including its pnuematic trim and DV shall be auto reset type. Each Deluge valve system shall consist along with all necessary required trim (UL listed) as per technical specifcation requirement. Each Deluge valve system shall consist of following:a) Deluge Valve shall be vertical type.b) Pneumatically actuated flange type C.S. deluge valves. c) Pneumatic Air QB Detector, having burst temperature 79°C (Yellow colour), complete with necessary fittings, clips, and accessories as required for proper functioning, as per approved drawings and specifications.d) 25 NB GI heavy grade pipe alongwith forged screwed elbows, unions and other fittings for Trim assembly.e) Galvanized pipes shall be as specified in Piping Class, Galvanized pipes shall be only Hot Dip galvanized. f) Deluge valve trims, Test & drain trims, pneumatic trims, 15 NB ball valve sets for local operation of Deluge valve.g) Pressure gauge with 6\" Dial Size with SS needle valve with necessary fittings & mounting.h) Supply & fixing of 3 Nos. 1/2\" NPT (F) needle valve in instrument box for mounting 2 Nos. pressure Switch and1 No. ofsolenoid valve and 1 No. ESD push button. i) Solenoid valve shall be normally open type,3/2 port SV, 230Vac, manual operation(in-built), Asco make. j) 15 mmMS ERWpipe, Heavy duty with required forged screwed fittings as required.k) Air filter regulator.l) Water motor gong along with inlet strainer, 25 NB piping and outlet pipe of 3 meter.m) Orifice plate of required size & fittings for mechanical interlocking with adjacent zones.n) Item includes installation and assembly of thedeluge valve with the above mentioned components, supply of material, welding, making flange connections using gaskets(with 200% gaskets SPARE QUANTITY), studs-nuts & washers and necessary couplings, clamps and similar items as may be required including making connection with hydrant net work.o) Any accessories or items necessary to ensure the complete and proper operation of the deluge valve, even if not explicitly mentioned in the specification, shall be considered and supplied by the vendor without any price implication.p) Mechanical interlock both Deluge valve systemNote: 1) No stub in / out connections are allowed, only standard fittings such as tees, weldolet, threadolets, Nipples, Coupling etc. shall be provided.2) The cost of structural supports and hanger supports shall be measured and paid separately under civil items.
414	Ambient Air Heating Shed - 1 (29 Mtrs x 13 Mtrs), 150NB Deluge Valve
415	Ambient Air Heating Shed - 1 (23 Mtrs x 13 Mtrs), , 150NB Deluge Valve
416	Extension of MVW spray system from existing Deluge valve system as per Layout (10 meter x 8 meter)
417	Buffer Air Chamber (BAC)Supply and installation of buffer air chamber ( capacity same as per existing buffer tank, 2700mm length x 1 meter dia) with inlet, outlet, air vent, isolation valve, pressure relief valve, pressure gauge & pressure switch along with 3-way manifold, air filter regulator, snubber for deluge valve line, shell plate thickness 8mm, head plate thickness 10mm and complete with all accessories for proper operation.
418	SURFACE PREPARATION & PAINTINGComplete supply of all the painting materials, transportation of materials to site, storage, providing necessary scaffolding, cleaning, surface preparation by blasting, application, testing and retouching with paints for piping, flanges, valves etc. as per IPPL painting specification, scope of work and directions of OWNER/ OWNER’S REPRESENTATIVE. The rate to include cost of all consumable, overheads and profits, labour and materials required for this job.Activities involved are : Grit blasting of surfaces, Primer application, Intermediate coat, Finish Paint coat.Touch-up shall be done after erection. The erected structural/piping/machineries surfaces shall be thoroughly cleaned before application of touch up and final paint. No separate charges shall be paid for rectifying the damaged surfaces during handling.
419	Surface preparation by grit Blasting- SA 21/2 Swedish Specification SIS 055900
420	Primer - Inorganic Zinc Silicate (DFT:65-75µ), IntermediateCoat - HB EpoxyMIO(DFT:65-75µ)&FinishCoat - TwopackAcrylicPoly-Urethane (PU) (DFT: 40-50µ/coat). Total Min DFT: 215 microns.
421	STENCILING AND LETTER WRITING OF NAME & RESPECTIVE CODE NO. ON EQUIPMENT / MACHINERY / PIPING AT ALL HEIGHTS AND SURFACESComplete supply of all the painting materials, transportation of materials to site, storage, providing necessary scaffolding, stenciling and Letter writing of name and respective code number in color paint letters/numbers. Stenciling shall be unbroken. Colour bands and ground colour for colour bands shall be as per codes or as per IPPL’s instructions. The above job shall be done as per directions of IPPL. The rate to include all consumable, overheads, labour and materials required for this job.
422	For Letter Sizes Up to 2 inch
423	For Letter Sizes 2\" to 4 inch
424	DISMANTLING OF (MS)PIPESDisconnecting and dismantling the existing aboveground and underground pipeline, including excavation, breaking of enclosure walls, backfilling, and restoring the surface to its original condition. The scope shall also include disconnection and removal of all associated fittings, valves, strainers, filters, adjustable supports, and any other accessories, by gas-cutting or hacksaw cutting as required. Dismantling of brick masonry pedestals, if necessary, and stacking of all dismantled pipes and fittings at site as directed shall be included in the scope.
425	150 mm NB, Wall thickness 5.4 mm (Material:IS:1239 Gr. HEAVY)

Tender Documents

SR No	FileName	File Description
1	Click here to download tender document	Tender Documents
2	Click here to download tender document	Tender Documents
3	Click here to download tender document	Tender Documents
4	Click here to download tender document	Tender Documents
5	Click here to download tender document	Tender Documents
6	Click here to download tender document	Tender Documents

Also Visit

Tenders

Tamil Nadu Tenders

Services Tenders

Mechanical Engineering Services Tenders

Mechanical engineering Service Tenders

Disclaimer

We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.

Top

Tender For Mechanical And Fire Fighting Works Along With Associated Piping For The Ambient Air Heater Project Supply, Installation, Fabrication, Erection, Testing And Commissioning Of Mechanical Works Along With Associated Piping For The Ambient Air Heate, Chennai-Tamil Nadu

Tender Documents

Disclaimer

About Us

Services

Browse Tenders

For Sales Inquiry

Tender For Mechanical And Fire Fighting Works Along With Associated Piping For The Ambient Air Heater Project Supply, Installation, Fabrication, Erection, Testing And Commissioning Of Mechanical Works Along With Associated Piping For The Ambient Air Heate, Chennai-Tamil Nadu

Tender Documents

Disclaimer

OTP Verification

About Us

Services

Browse Tenders

For Sales Inquiry

Connect With Us