|
| 1 | Excavation in Soil (any type) using Hydraulic Excavator CK 90 with hydraulic excavator of 0.9 cum bucket capacity including cutting, trimming bottom and side slopes, in accordance with requirements of lines, grades and cross sections, including all lifts and combined lead upto 30m.CSR Ref.6.19(T/R) |
| 2 | Cement concrete 1:5:10(b)With stone aggregate 40mm gauge(ii) mixing by mechanical means using concrete mixer volumetric type CSR Ref. 10.9 (b)(ii) T/R |
| 3 | Cement concrete 1:2:4(a) With stone ballast or shingle(ii) mixing by mechanical means using concrete mixer volumetric type. CSR Ref. 10.13 (a)(ii) T/R |
| 4 | Reinforced cement concrete M-20 mechanically batch mixed using batch type concrete mixer as per IS:1791 and vibrated by needle vibrator but excluding steel reinforcement centring and shuttering in foundation and plinth CSR Ref. 10.15 T/R |
| 5 | Reinforced cement concrete M-20 mechanically batch mixed using batch type concrete mixer as per IS:1791 and vibrated by needle vibrator but excluding steel reinforcement centring and shuttering in superstructure. CSR Ref.10.20 T/R |
| 6 | Shuttering for faces of concrete foundations and foundation beam & plinth beam (vertical or battering) CSR Ref.9.1 |
| 7 | Centering and shuttering for columns (Square or rectangular or polygonal in plain) CSR Ref. 9.4 |
| 8 | Centering and shuttering for sides and soffits of beam, beams, launching girders, bressumers, lintels.CSR Ref. 9.6 |
| 9 | Cold twisted deformed (Ribbed/ Tor steel) Bars (Fe 500 grade as per IS 1786-2008) , for R.C.C works, where not including in the complete rate of RCC including bending and binding placing in position complete. CSR Ref.18.18 (T/R) |
| 10 | First class burnt brick work laid in cement sand mortar 1:6 in first storey up to 4 meters above plinth level CSR Ref. 11.4(i) T/R |
| 11 | First class burnt brick work laid in cement sand mortar 1:6 in first story up to 4 meters above plinth level using old recovered bricks.NS Item |
| 12 | 20mm thick cement plaster 1:5 in two coat work CSR Ref.15.21 (T/R) |
| 13 | Applying priming coat with metal primer on new steel or iron work including preparation of surface.CSR Ref.16.20 T/R |
| 14 | Painting two or more coats excluding priming coat with synthetic enamel paint in all shades on wood work, metallic or plastered, concrete surface to give an even shade.CSR Ref. 16.17 T/R |
| 15 | Steel work, fixed independently without connectingplates, including cutting, hoisting & fixing in position (c) Tees, angle& channels CSR Ref.18.1 (c) (T/R) |
| 16 | Cement pointing 1:3 deep variety CSR Ref. 15.60 T/R |
| 17 | Providing & fixing concertina coil fencing with punched tape concertina coil 600mmdia 10 meter openable length (total length90 m) having 50 Nos. rounds per 6.00 meter length upto 3.00 meter height of wall with existing angle iron Y-shaped placed 2.4m or3.00m apart and with 9 horizontal R.B.T. reinforced barbed wire, stud tied with G.I .staples& G.I .clips to retain horizontal including necessary bolts or G.I. barbed wire tied to angle iron all complete ,as per directions of the E.I.C. with reinforced barbed tape (RBT)/spring core (2.5mm thick) wire of high tensile strength of165 Kg./sq.mm with tape (0.52mm thick) and weight 43.478 gm/meter.NS ITEMS(T/R) |
| 18 | Finishing walls with cement based water soluble exterior paint such as snowcem, robbiacem etc. two or more coats to give an even shade. CSR Ref 16.13 T/R |
| 19 | Welding by gas or by electric plant, including carriage to and from workshop etc. CSR Ref 18.28(T/R) |
| 20 | Dismantling Concrete (Lime concrete, cement concrete of 1:6:12 or leaner mix CSR Ref 8.6 (a) (L/R) |
| 21 | Dismantling brick work tile masonary or tile lining.(b) In cement CSR Ref 8.5 (b) L/R |
| 22 | Scraping :-(e)Bricks dismantled from brick work in lime or cement.CSR Ref 8.31 (e) L/R |
| 23 | Jungle clearance(Removal of wild growth along the boundary wall Both sides Jungle clearance) CSR Ref 26.23 |
