Name of Work: Repair & Maintenance of 2 HP Submersible Pumpset near CPC Canteen under FTR HQ Tripura.
Sl. No.
Item Description
1
Laying and Jointing PVC Pipe. Heading
2
Supplying and lowering of 25 mm size HDPE pipe and fixing with existing submersible pump by suitable means inside the existing bore well at site as required.
3
Supplying and laying of 40 mm diaDWC HDPE pipe ISI marked along with all accessories like socket, bend, couplers etc. conforming to IS 14930, Part II complete with fitting and cutting, jointing etc.direct in ground (75 cm below ground level) including excavation and refilling the trench but excluding sand cushioning and protective covering etc., complete as required.
4
Providing and fixing of pvc insulated flexible copper 3 core flat sheathed submersible cable of Size 2.5 sqmm i/c bindings, connections etc complete as required. Make Havells/finolex/Standard
5
Supplying & laying of2X 16 sqmmXLPE insulated and PVC sheathed Armoured power cable of 1.1 KV grade of following size in the existing RCC/ HUME/ METAL pipe/ Open duct as required. Make Havells/finolex/ Standard/ATC
6
Providing and fixing single phase submersible motor starter suitable for 2 HP Submersible , in exisiting panel with connection testing and commisioning etc as required or equivalent Schneider/ c&s/Legrand / Crompton
7
Providing and fixing motor runing Capacitorsuitable for 2 HP Submersible , in exisiting panel with connection testing and commisioning etc as required or equivalent Schneider/ c&s/Legrand./Crompton
8
Supplying and lowering of stainless steel / Brass threaded stepped adopter with existing submersible pump with suitable size nuts & bolts with long nuts and mating with HDPE pipe by heat insertion to make it rigid at site etc. as required.
9
Providing and fixing 20 mtr 8mm PVC Coated GI supportwire along with HDPE pipe for protection of motor etc. as required.
10
Providing and fixing PVC non retrun valve of approved quality (screwed end )in the existing pipe etc. as required.
11
Providing, installation of factory assembled floor mounted type totally closedControl pannel/ feeder pillar for S/Pump set having 400 mm bus bars , fabricated from 2 mm (nominal ) thick M S sheet (with tapered drip proof top) having 50 mm x 50 mm x 6 mm MS angle, 300 mm long pedestal andhinged door of same material shall be provided on the front,with necessary handle,seling matrial,, gasket shall be provided on door complete i/c earth studs, gland plate,paintings and installation with cement concrete foundations (1:3:6)45 cm below ground level 60 cm above the ground level i/c finishing etc as reqd. ( Minimum Size of One feeder pillar is 600mm x450mm x 300mm and size for second panel is 300mmx300mmx300mm)
We takes all possible care for accurate & authentic tender information, however Users
are requested to refer Original source of Tender Notice / Tender Document published by
Tender Issuing Agency before taking any call regarding this tender.
