|
| 1 | Hacking out old broken glass panes (any thickness size, quality or description) from metal frames including punching or drilling out old glazing pins/spring clips and providing and fixing new ones complete all as specified and directed. |
| 2 | 3 mm thick sheet glass ordinary quality and glazing with oil putty or wooden beads in squares not exceeding 0.50 Sqm in each pane complete all as specified and directed. |
| 3 | 4 mm thick sheet glass ordinary quality and glazing with oil putty or wooden beads in squares not exceeding 0.50 Sqm in each pane complete all as specified and directed. |
| 4 | Cleaning and removing all scale and dirt, etc, from tanks capacity 1000 ltr and from mouths of circulating pipes, etc, complete all as specified and directed. |
| 5 | Cleaning and removing all scale and dirt, etc, from tanks capacity 1000 ltr and from mouths of circulating pipes, etc complete all as specified and directed. |
| 6 | Taking down chowkhat or frames with shutters (without taking off shutters from the frames) not exceeding 1.5 Sqm each including cutting holes for taking out hold fasts, dismantling brick work (holes cut and any other damages to jambs, walls for taking out hold fast shall be finished identical to existing finish without any extra cost) complete all as specified and directed. |
| 7 | All as per ser item No 6 above but exceeding 1.50 Sqm and not exceeding 4.00 Sqm complete all as specified and directed. |
| 8 | Taking down shutters of any description exceeding 1 square metre each and not exceeding 2 Sqm complete all as specified and directed. |
| 9 | Taking down door shutters of any description exceeding 1 square metre and not exceeding 2 Sqm each easing and adjusting as required and re-fixing in same opening including renewal of screws complete all as specified and directed byEngr-in-Charge. |
| 10 | Pressed steel frames for doors, made out of 1.25 mm thick MS sheet, with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc.complete,of frame size 105 mm x 60 mm, including one shop coat of red oxide zinc chrome primer,including filling voids with PCC 1:3:6 type C-0 complete all as specified and as directed by Engr-in-Charge. |
| 11 | Pressed steel frames for doors, made out of 1.25 mm thick MS sheet, with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc.complete,of frame size 125 mm x 60 mm, including one shop coat of red oxide zinc chrome primer,including filling voids with PCC 1:3:6 type C-0 complete all as specified and as directed by Engr-in-Charge. |
| 12 | Flush shutters 30 mm thick , solid core construction, with block board core and plywood face panels, commercial type on both sides and both face is covered with decorative face veneer with lipping/frame to match complete all as specified and directed. |
| 13 | Factory made, 2nd class hard wood (SAL/Hollock) , plain framed, panelled shutters (two or three panels) with lock rail and panel of 12 mm BWP commercial ply or 12 mm veneered particle board with commercial veneering on both sides, the side of rail and style as per IS-1003 (Part-I), kiln seasoned and chemically pressure treated, 35 mm thick complete all as specified and directed. |
| 14 | 2nd class hard wood (SAL/Hollock) glazed and skelton shutters 35 mm thick open rebated and prepared to receive glass, guage etc. (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut & mitred beads for securing glass etc. sizes of members of shutters as specified in SSR Pt-I Section 8.24(a) supplied and fitted to chowkhats complete all as specified and directed. |
| 15 | Solid PVC door frame of size 50 mm x 47 mm made out of 5 mm plain colour PVC sheet reinforced with M.S. square tube and fixed in opening as per specification and drawing complete all as specified and directed. |
| 16 | 30 mm thick, factory made solid panel PVC moulded door shutter (style) consisting of frame made out of M.S tube for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rails and bottom rail on either side & as gap insert for top rail & bottom rail, Paneling of plain colour PVC sheet to be fitted in the M.S. frame welded/sealed to the stiles & rails with suitable PVC sheet beading and joined together with solvent cement, fixed in the frame at site as per specification and drawing complete all as specified and directed. |
| 17 | Steel window (box type) factory made with side hung shutters including pintol hinges, steel handles, steel peg stay and all locking arrangement complete with glazing bars dovetailed or welded including one shop coat of red oxide primer complete all specified and as directed.Notye : i) The window shall be fabricated as per Drg No CEUZ/TD/1517/15 Sheet 1/3 to 3/3(ii) MS fillets, glazing, wire gauge shall be measured and paid separately. |
| 18 | Steel window (box type) factory made with side hung shutters including pintol hinges, steel handles, steel peg stay and all locking arrangement complete without glazing bars dovetailed or welded including one shop coat of red oxide primer complete all specified and as directed.Notye : i) The window shall be fabricated as per Drg No CEUZ/TD/1517/15 Sheet 1/3 to 3/3(ii) MS fillets, glazing, wire gauge shall be measured and paid separately. |
| 19 | Factory made mild steel ventilators box type with upper top hung shutters and bottom fixed type shutters including pintol hinges, steel peg stay and one shop coat of red oxide primer complete all specified.Note : i) The window shall be fabricated as per Drg No CEUZ/TD/1302/2009 Sheet 1/3 to 3/3.ii) MS fillets, glazing, wire gauge shall be measured and paid for separately |
| 20 | Mild steel framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted or forged into spikes, framed guard bar, barred iron doors; ladder, framed balusters; railing; frame work for water tanks, cooler stand etc and similar work conforming to FE 290-0 orGde-E-165, complete all as specified and as directed. |
| 21 | Dismantling of wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed. |
| 22 | Framed work as in cupboard, almirah and ceiling frame of angle or other section with gusset plates, rails, braces etc. complete drilled for fixing of steel sheeting or other covering etc. to be prepered for hanging or sliding with hinges also fastening and fixing conforming Fe-290 (Gde 165) complete all as specified and directed. |
| 23 | S&F Hard Drawn steel wire fabric cut to length bent to shape required and tying,welding to the angle iron frame etc complete all as specified and directed. |
| 24 | Powder coated Anodised Aluminium frames for doors, windows, ventilators with one or more rebates including jointing cleats for fixing etc complete all as specified and directed. |
| 25 | Powder coated aluminium anodised window and ventilator shutters, fixed type without sash bar, aluminium section weighing 0.55 kg/m including necessary jointing cleat glazing clips, rubber packing, anodised aluminium snap beading screws etc.complete all as specified and directed. |
| 26 | Powder coated aluminium grill/guard bars to aluminium window complete all as specified and as directed. |
| 27 | Galvanised mild steel wire cloth, 0.56 mm nominal dia wire and average width of aperture 1.18 mm and fixed with tinned tacks or galvanised wire staple complete all as specified and directed. |
| 28 | Galvanised mild steel wire cloth, 0.56 mm nominal dia wire and average width of aperture 1.18 mm fixed with tinned tacks or galvanised wire staple as in repairs, complete all as specified and directed. |
| 29 | Mild steel sliding door bolt plate type 250 mm long stove enameled black with bright bolt not less 12 mm dia bolt with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate complete all as specified and directed. |
| 30 | All as per ser item No 29 above but fixed in repair complete all as specified and directed. |
| 31 | 150 mm long stainless steel pressed steel handle, oval type, stove enameled blackcomplete all as specified and directed. |
| 32 | All as per ser item No 31 above but fixed in repair complete all as specified and directed. |
| 33 | Aluminum anodised barrel tower bolts of extruded section with 150 mm long bolt complete all as specified and directed. |
| 34 | All as per ser item No 33 above but fixed in repair complete all as specified and directed. |
| 35 | Stainless steel cold rolled butt hinges mediumweight 100 mm long fixed to pressed steel door frame if required complete all as specified and directed. |
| 36 | All as per ser item No 35 above but fixed in repair complete all as specified and directed |
| 37 | Mild steel cold rolled butt hinges mediumweight 75 mm long, including fixing to pressed steel door frame cupboard & Almirah if required complete all as specified and directed. |
| 38 | All as per ser item No 37 above but fixed in repair complete all as specified and directed |
| 39 | 2nd class hard wood small fittings such as shaped door & window stops, cleat including all necessary labours, articles not exceeding 200 cubic centimeter each fixed in repairs complete all as specified and directed. |
| 40 | 2nd class hard wood beads, straight (any size) for glazed or gauzed joinery, renewed, including miters etc. complete all as specified and directed. |
| 41 | Taking down cement plaster, any description on brick or stone or cement concrete walls including raking out joints, hacking for key, scrubbing down with water complete all as specified and directed. |
| 42 | 15 mm thick rendering on fair faces of brick/concrete or stone surfaces in cement mortar 1:4 and finished even and smooth without using extra cement complete mixed with water proofing complete in the proportion as mentioned in manufacturer\"s instructions all as specified and directed. (WPC shall be measured separtely). |
| 43 | 15 mm thick rendering on fair faces of brick/ stone masonary (Patches area not exceeding 3.00 Sqm in each patches) surfaces in cement mortar 1:4 and finished even and fair without using extra cement complete all as specified and directed. |
| 44 | 10 mm thick rendering on fair faces of brick works in cement mortar 1:6 finished even and smooth without using extra cement in cement mortar complete all as specified and directed. |
| 45 | 5 mm thick rendering on fair faces of concrete such as chajjas/ceiling finished even and smooth without using extra cement in cement mortar 1:3 complete all as specified and directed. |
| 46 | Supply only liquid water proofing compound as per latest IS specificationcomplete all as specified and directed. |
| 47 | M&L for applying two coats of cement base paint on walls after preparation of newly plastered surfaces complete all as specified. |
| 48 | M&L for preparation of new plastered surfaces on wall and applying three coats of white wash complete all as specified and directed. |
| 49 | M&L for preparation of new plastered surfaces on ceiling and applying three coats of white wash complete all as specified and directed |
| 50 | Preparation of old painted decoratedwooden surfaces over 10 cms width or girth and applying one coat of synthetic enamel paint complete all as specified and directed. |
| 51 | Preparation of new wooden surfaces over 10 cms width or girth and applying two coat of synthetic enamel paint over a coat of pink primer complete all as specified and directed |
| 52 | Applying two coats of oil emulsion distemper on walls including preparation on old plastered surfaces complete all as specified and directed. |
| 53 | Preparation of new and old surfaces on wall and applying 1mm thick coat of wall putty (JK/Birla) to make the surface smooth and even complete all as specified and directed. |
| 54 | Applying one coat of white washing on old ceiling surfaces after preparation ofplastered or unplastered for white wash surfaces complete all as specified and directed. |
| 55 | Applying one coats of cement base paint on old surfaces wall including preparation of surface complete all as specified and directed. |
| 56 | Applying one coat of white washing on old wall surfaces after preparation of plasteredfor white wash surfaces complete all as specified and directed. |
| 57 | Preparation of new steel and iron surfacesnot exceeding 10 cm width or girth and applying two coats of synthetic enamel paintcomplete all as specified and directed. |
| 58 | Preparation of old steel and iron surfaces not exceeding 10 cm width or girth and applying two coats of synthetic enamel paintcomplete all as specified and directed. |
| 59 | Preparation of new steel surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a priming coat of red oxide zinc chrome primer complete all as specified and directed. |
| 60 | Preparation of old painted steel surfaces of any description, over 10 cm width or girth, not other wise described and applying one coat of synthetic enamel paint complete all as specified and directed. |
| 61 | 18/19mm thick ISI, termite proof, chemically well pressed, HDHMR board exterior grade prelaminated, both side with decorative choice lamination fixed with screws to frame work for cupboards etc including 6 mm thick wood beading all around, complete all as specified and as directed . |
| 62 | Continuous (piano) hindges mild steel, bright finish width of flaps (when open) 30 mm complete all as specified and directed. |
| 63 | Ball catches with 8mm dia steel balls and brass body and striking plate including letting in and fixed complete all as specified and as directed. |
| 64 | 100 mm long aluminium anodised hasp and staple complete all as specified and directed. |
| 65 | All as per ser item No 64 above but fixed in repair complete all as specified and directed. |
| 66 | 75 mm long stainless steel pressed steel handle, oval type, stove enameled blackcomplete all as specified and directed. |
| 67 | Mild steel rat tail rod pattern including roller and roller plate fixed to wooden or steel frames with welding etc. complete all as specified and directed. |
| 68 | All as per ser item No 67 above but fixed in repair complete all as specified and directed. |
| 69 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) removing serviceable tiles to store and rubbish off the premises complete all as specified and directed. |
| 70 | Glazed ceramic tiles in vertical surface 600 x 300 x 8-10 mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match the surface rendering as backing coat to receive the tiles on fair faces of brick /concrete surfacesin cement mortar 1:3 and finishedeven and rough complete all as specified and directed. |
| 71 | Non-skid coloured ceramic tiles (square/ rectangular) 7 to 8 mm thick, area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm as in floors, set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface over and including 15 mm thick screed bed or bedding layer in cement mortar 1:4, complete all as specified and as directed by Engr-in-Charge. |
| 72 | Non skid ceramic tiles on vertical surfaces as in skirting over and including 10 mm thick rendering as backing coat to receive the tiles on fair faces of brick /concrete surfacesin cement mortar 1:3 and finishedeven and rough complete all as specified and directed. |
| 73 | Light shade Vitrified tiles 8-10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of existing surfaces over and including 15 mm thick screed bed or bedding layer in cement mortar 1:4 complete all as specified and as directed.(Note:The contractor shall have no claim on difference what so ever on shade /colour of tile) |
| 74 | Light shade Vitrified tiles 8-10mm on vertical surfaces as in skirting over and including 10 mm thick rendering as backing coat to receive the tiles on fair faces of brick /concrete surfacesin cement mortar 1:3 and finishedeven and rough complete all as specified and directed. |
| 75 | 25 mm thick Sand filling under floors or in foundations including watering and consolidation for laying of interlocking tiles complete all as specified and directed |
| 76 | Coloured machine vibro mechanically floated glossy finish interlocking cement paver block, any shape and size confirming to IS 15658-2006 of 60mm thickness, M-35 Grade with, topping of cement mixed with imported pigment, colour and shape shall be as approved, complete all as specified and directed. |
| 77 | Chequered coloured cement concrete tiles 30 cm x 30 cm x 20 mm thick, machine pressed, factory made, set jointed and pointed in neat cement slurry, laid in floor with grey cement and pigment over and including 20 mm thick screed bed or bedding layer in cement mortar 1:4 complete all as specified and as directed. |
| 78 | 75 thick PCC 1:4:8 type D-2 (using 40 mm graded stone aggregate) as in sub base complete all as specified and directed. |
| 79 | 25 mm thick PCC 1:2:4 type B-0 (using 12.50 mm graded crushed stone aggregate) as in sub base for laying floor finishes complete all as specified and directed. |
| 80 | Demolition of stone slabs and tiles of any description or thickness in floors, aprons etc complete all as specified and directed. |
| 81 | Green granite stone slab single piece on shelves 18 to 20 mm thick over 15 mm thick screed bed in cement mortar 1:4 set jointed with 3.00 kg per sqm neat cement slurry and pointed with coloured cement to match the surface complete all as specified and directed. |
| 82 | Coloured durastone heavy duty vitrified tiles 8-10 mm thick Sq/rectangular tiles area of each tile not exceeding 0.36 Sqm as in floors set and jointed in neat cement slurry and pointed in clooured cement to match the surface over and including 20 mm thick screed bed or bedding layer in cement mortar 1:4 complete all as specified and as directed.Note : The contractor shall have no claim on difference what so ever on shade /colour of tile. |
| 83 | Coloured durastone heavy duty vitrified tiles 8-10 mm thick Sq/rectangular tiles area of each tile not exceeding 0.36 Sqm as in floors set and jointed in neat cement slurry and pointed in clooured cement to match the vertical surface complete all as specified and directed. Note : The contractor shall have no claim on difference what so ever on shade /colour of tile. |
| 84 | M&L for Machine cut kota stone slab flooring 18-20 mm thick over cement screed and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing over and including 20 mm thick screed bed or bedding layer in cement mortar 1:4 complete all as specified and as directed. |
| 85 | Machine cut kota stone slab flooring 18-20 mm thick in riser of steps, skirting, dado and pillar laid over cement screed andjointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified. |
| 86 | 150mm wide strip of makrana white marble 18 mm thick machine cut, bedded jointed and pointed with grey cement slurry including cutting and polishing types over and including 20 mm thick screed bed or bedding layer in cement mortar 1:4 complete all as specified and as directed. |
| 87 | Machine pressed (factory made) plain cement concrete 1:2:4 type B-1 (using 20 mm graded crushed stone aggregate), kerb stone of any size, laid in trenches on edges of roads joints fitted in CM 1:4 including excavation in any type of soil, PCC bed, returning filling and removal of surplus soil to a distance not exceeding 50 m from the starting point complete all as specified and directed. |
| 88 | Dismantling asbestos corrugated or semi corrugated sheets as in roof covering including ridge etc complete all as specified and directed. |
| 89 | Dismantling wall and ceiling boards (Fiber, pulp, insulation, blankets) any thickness including covered fillets and supporting members complete all as specified and directed. |
| 90 | Dismantling structural steel any description including door steel gates etc complete all as specified and directed. |
| 91 | Mild steel rolled section/tubular section as in main and cross beams, purlins, rafters, posts where connected to common rafter and running rails etc confirming to Fe-410-W complete all as specified and directed. |
| 92 | AC designer composite ceiling board 4 to 6 mm thick in 600 x 600 mm panel confirming to IS-14682 type-B category-3 including GI frame, holdfast & suspenders complete all as specified and directed. |
| 93 | Pre painted galvalume aluminium zinc coating GI based corrugated sheets 0.50 mm thick of any colour having tensile strenght of 550/MPA as in roof covering, cladding to wall fixed with self taping screws complete all as specified and directed. Note : Rate quoted by contractor deemed to be included for roof up to height of 10 mtrs |
| 94 | All as per ser item No 93 above but plain sheets as in ridges, eaves, gutters, drain complete all as specified and directed. Note : Rate quoted by contractor deemed to be included for roof up to height of 10 mtrs. |
| 95 | 6 mm thick asbestos cement corrugated sheets as in roof covering fixed with L or J hooks complete all as specified and directed. Note : Rate quoted by contractor deemed to be included for roof up to height of 10 mtrs. |
| 96 | All as per ser item No 95 above but fixing only complete all as specified and directed. |
| 97 | 6 mm thick 2 piece serrated ridge for corrugated or semi corrugated sheets fixed with L or J hooks complete all as specified and directed. |
| 98 | Roughing surfaces of old concrete surfaces by picking up, sweeping, cleaning and washing down with water to remove dust etc including taking down tarfelt and brushing neat cement slurry @3kg/Sqm mixed with water proofing compound including 20mm thick screeding in CM (1:4) finished even and smooth mixed with water proofing compound complete all as specified and directed. (WPC shall be measured and paid separatley) Note : No extra cost shall be paid to contractor in r/o any removal of existing roof treatment. |
| 99 | Priming surfaces with bituminous primer confirming to IS-3384 @ 0.40kg/sqm, after drying of primer applying a coat of hot blown bitumen confirming to IS-702 @ 1.20 kg/sqm and layin polymeric water proofing membrane, five layerd with centre core of 90 micron high molecular density polythelene film (minimum weight 3.5 kg per sqm) with end over laps not less than 150 mm and side lap 75 mm complete all as specified and directed for sunken floor treatment or painting with solar reflective paint for roof surfaces. |
| 100 | Demolition of brick work or stone masonry built in cement mortar including all quoines arches, pillar etc but excluding ashlar facing, dressed stone work and precast concrete articles complete all as specified and directed. |
| 101 | Brick work with old size sub class \"B\" bricks, straight or curved on plan exc 6 m mean radius built in cement mortar 1:6, complete all as specified and as directed. |
| 102 | All as per ser item No 101 but except bricks complete all as specified and directed. |
| 103 | Walling of random rubble stone masonry uncoursed, with best quality locally available stones, well bonded, bedded and solidly hearted , built in cement mortar 1:6 complete all as specified and as directed. |
| 104 | All as per ser item No 103 but except stone complete all as specified and directed. |
| 105 | Flush pointing to stone rubble masonry, uncoursed or brought up to courses built in cement mortar 1:4 complete all as specified and directed. |
| 106 | Vitreous China wash down water closet pan (pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe) with P or S trap but including plastic water closet seat and water Jet fitted with mild steel chromium plated or aluminium hinging device including connection to drain and flush pipe in repair complete all as specified and directed. |
| 107 | Vitreous China squatting pan, \"Orissa\" pattern, size 580 x 440 mm white, with integral foot rests including a provision of concrete bedding but fixed in repair complete all as specified and directed. |
| 108 | PVC floor trap with dia of outlet 75 mm with CI grating including jointing to waste pipe fixed in cement concrete PCC 1:2:4 type B-1 fixed in repair complete all as specified and directed. |
| 109 | All as per ser item No 108 but 100 mm complete all as specified and directed. |
| 110 | 10 ltr PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets fixed in repair complete all as specified and directed. |
| 111 | Supply only flush pipe of polyethylene of low or high density or PVC, 32 mm dia, for low level cistern complete all as specified and directed. |
| 112 | Vitreous China wash basin, white, flat back, size 550 x 400 mm excluding tap, chain, plug but including waste coupling, waste pipe, fixing of taps, fitting and brackets and cutting for and pinning in ends of brackets fixedin repairs complete all as specified and directed. |
| 113 | S&F Toilet paper holder,flat recessed type stainless steel complete all as specified and directed. |
| 114 | Liquid soap container of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats. (Minimum weight 105gms) complete all as specified and directed. |
| 115 | Towel Ring of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats (Minimum weight 90gms) complete all as specified and directed. |
| 116 | Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long complete all as specified and directed. |
| 117 | Tubular towel rail, 20 mm dia, D type, 600 mm long between flanges aluminium anodized, fixed with rawl plugsfixed in repair complete all as specified and directed. |
| 118 | Aluminium Hat and coat hooks, solid body, 175mm to 250 mm long complete all as specified and directed. |
| 119 | Chromium plated soap dish and fixed with CP brass screws in wooden/plastic cleat in repair complete all as specified and directed. |
| 120 | Health faucet (ABS Body) with 8mm dia, 1.2 meter long flexible tube & wall hook with all accessories all as approved and fixed as in repairs complete all as specified and directed. |
| 121 | Brass CP mixer for mixing hot & cold water screwed down for iron pipe and fixed in repair complete all as specified and directed. |
| 122 | Sinks with drainage board made of stainless steel 1 mm thick kitchen or laboratory with plugs, washers, wastes and waste couplings; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915 mm x 460 mm bowl size 405 mm x 355 mm x 178 mm including waste coupling and waste pipe in repair complete all as specified and directed. |
| 123 | S & F in repairs 600 mm x 450 mm mirror of 5 mm thick selected quality glass, mounted on 6 mm thick commercial plywood with aluminium frame and fixed to wooden plugs with chromium plated brass screws and cup washers complete all as specified and directed. |
| 124 | Brass CP shower rose 125 mm size fixed in repair complete all as specified and directed. |
| 125 | Pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure with or without lettered \"Hot\" or \"Cold\" with long screwed shanks and fly nuts, screwed for iron pipe of bore 15 mm fixed in repair complete all as specified and directed. |
| 126 | Bib taps, fancy type, cast copper alloy chromium plated with crutch or butterfly handle screwed down for iron pipe or for brass ferrule and fixed for bore of pipe 15 mm fixed in repair complete all as specified and directed. |
| 127 | Mild steel chromium plated curtain rod cut to size 20 mm dia with holder/bracket, stops, rollers etc. complete fixed in repairs complete all as specified and directed. |
| 128 | PVC connection 15 mm size with PTMT nuts of length 600 mm fixed in repair complete all as specified and directed. |
| 129 | 32 mm dia waste coupling fittings brass chromium plated for glazed ware sink, basins etc with long screwed shank and fly nuts, flanges end bedded in red lead cement and other end fixed in repair complete all as specified and directed. |
| 130 | 40 mm dia waste coupling fittings brass chromium plated for glazed ware sink, basins etc with long screwed shank and fly nuts, flanges end bedded in red lead cement and other end fixed in repair complete all as specified and directed. |
| 131 | Stainless steel grating doom 100 mm dia of PTMT (minimum weight 25 gms) fixed in repair complete all as specified and directed. |
| 132 | 32/40 mm dia PVC waste pipe for WHB/sink in repair complete all as specified and directed. |
| 133 | Taking up or down steel tubing with connections for cleaning for refixing and removal from site complete of bore 15 mm complete all as specified and directed. |
| 134 | Taking up or down steel tubing with connections for cleaning for refixing or removing to store/yard complete of bore 20 mm complete all as specified and directed. |
| 135 | Steel water tubing medium grade galvanised with all fittings including short lengths, fixed to walls, concealed in wall and ceiling or laid in floor complete with all fittings (such as bends, elbows, Tee, short pieces, connectors, back nuts, diminishing pieces, caps and plugs, unions etc.) of nominal bore 15 mm dia complete all as specified and directed. |
| 136 | Steel water tubing medium grade galvanised with all fittings including short lengths, fixed to walls, concealed in wall and ceiling or laid in floor complete with all fittings (such as bends, elbows, Tee, short pieces, connectors, back nuts, diminishing pieces, caps and plugs, unions etc.) of nominal bore 20 mm dia complete all as specified and directed. |
| 137 | Cutting chases in brick wall, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels etc. and cutting chases for concealed water tubing or concealed conduit wiring etc. and making good, cutting not exceeding 10 cm girth complete all as specified and directed. |
| 138 | Refixing 15/20 mm dia old steel tubing and connections in new or old position (Walls, ceiling, floors etc and making good, cutting not exceeding 10 cm girth complete all as specified and directed. |
| 139 | Rotational molded (triple layered white coloured as per IS 12701) polyethylene water storage storage tank (cylindrical vertical with closed threaded top) hoisted and fixed in position including connecting inlet/outlet pipe connecting with necessary fittings all as required at site and specified in SSR part -I of capacity 1000 litres including taking down old, complete all as specified and directed. |
| 140 | Rotational molded (triple layered white colouredas per IS 12701) polyethylene water storage storage tank (cylindrical vertical with closed threaded top) hoisted and fixed in position including connecting inlet/outlet pipe connecting with necessary fittings including fixing of cover lid with screws all as required at site and specified in SSR part-I of capacity 500 litres including taking down old, complete all as specified and directed. |
| 141 | Ball valves of size 20 mm bore dia high pressure of PTMT (Make-Prayag) with epoxy coated aluminium rod and high density plastic ball (Minimum weight not less than 210 gms) screwed for iron pipe and fixedincluding necessary fitting as required at site as in repair complete all as specified and directed. |
| 142 | CPconcealed stop cock of cast copper alloy(ISI Marked ) chromium plated fancy type scrwed down high pressure with capstain head screwed both end for iron pipe 15mm borefixed in repairs for iron pipe complete all as specified. |
| 143 | Stop valves/angle valve of 15 mm bore, but fancy type, chromium plated screwed down high pressure with crutch or butter fly handle screwed both ends for iron pipe or for unions including necessary fitting as required at site as in repair complete all as specified and directed. |
| 144 | PVC tank cover lid (threaded/without threaded) for 500 to 1000 litres capacity including all locking arrangements, nuts, bolts etc for fixing complete all as specified and directed. |
| 145 | Dismantling of cast iron or reinforced concrete drain pipes, jointed in cement mortar and taking out of trenches, if required of internal dia of pipe 50/75/100 mm complete all as specified and directed. |
| 146 | 100 mm bore cast iron soil, sand cast, waste and vent pipes in any length with or without ears, with cement joints fixed to walls complete all as specified and directed. |
| 147 | 100 mm bore any type of soil, sand cast, waste and vent pipes in any length with or without ears, with cement joints fixed to walls complete all as specified and directed. |
| 148 | Cast iron soil, waste and vent pipes in any length with or without ears, with cement joints fixed to walls, 75 mm dia, sand cast pipes including two coats of black Japan paint complete all as specified and directed. |
| 149 | Fing only cast iron soil, waste and vent pipes in any length with or without ears, with cement joints fixed to walls, 75 mm dia, sand cast pipes including two coats of black Japan paint complete all as specified and directed. |
| 150 | 50 mm bore cast iron soil, sand cast, waste and vent pipes in any length with or without ears, with cement joints fixed to wall, complete all as specified and directed. |
| 151 | All as per ser item No 150 above, but except pipe, any type complete all as specified and directed. |
| 152 | 100 mm bore cast iron soil, sand cast, waste and vent pipes in any length with or without ears, with cement joints laid in trenches or in floors complete all as specified and directed. |
| 153 | All as per ser item No 152 above but 75 mm dia complete all as specified and directed. |
| 154 | Cast iron bends (any radius) with for 75 mm bore fitted with oval access doors fixed in repair complete all as specified and directed. |
| 155 | Cast iron bends (any radius), diminishing pieces or tapers (larger bore measured) for 100 mm bore fitted with oval access doors fixed in repair complete all as specified and directed. |
| 156 | Cast iron branch pieces, single (equal of unequal), ordinary or inverted (spigot or socket type) or with parallel branches for 100 mm bore fitted oval access door fixed in repair complete all as specified and directed. |
| 157 | Cast iron cowl suitable for pipes of 50 mm bore fixed in repair complete all as specified and directed. |
| 158 | Cast iron cowl suitable for pipes of 75 mm bore fixed in repair complete all as specified and directed. |
| 159 | Taking down eaves gutters and rain water pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc. including cleaning or refixing or removal to Store (measured overall and fixed along the centre line over fittings and accessories) complete all as specified and directed. |
| 160 | 110 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls complete all as specified and directed |
| 161 | 110 mm bore PVC (SWR) bends/shoes any radius fixed in repair complete all as specified and directed. |
| 162 | Stack clamps made out of 50 x 5 mm flat iron and 16 mm dia round iron stays, including bolts and nuts and securing ends of stays to wall or roof for 100 mm bore pipe, complete all as specified and as directed. |
| 163 | Demolition of cement concrete(unreinforced) in ground floor and in paving not exceeding 15 cm thickness (below or aboveground level) complete all as specified and directed |
| 164 | 25 mm thick cement concrete 1:2:4 type B-0 (using 12.5 mm graded crushed stone aggregates) as in floor and finished even and fair complete all as specified and directed. |
| 165 | PCC 75 mm thick type C-1 1:3:6 (using 20 mm graded crushed stone aggregate) as in plinth protection laid in alternate pannels finished even and smooth without using extra cement complete all as specified and directed. |
| 166 | Plain cement concrete 1:2:4, type B-1 (using 20 mm graded crushed stone aggregates) as in steps, seismic and other similar bands, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, cills, lintels upto 1.50 metre clear span, copings etc. and in similar works including weathering, slightly rounded or chamfered angles and throating and necessary form works, complete, all as specified and directed. |
| 167 | PCC type C-1 1:3:6 (using 20 mm graded crushed stone aggregate) as in surface channel and drain including all necessary form work complete all as specified and directed. |
| 168 | Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred/stopped ends etc. complete all as specified and as directed. |
| 169 | Demolition of cement concrete reinforced (reinforcement cut as required to facilitate demolition) as in beams, staircase, landing, chajjas and similar suspended workcomplete all as specified and directed. |
| 170 | Reinforced cement concrete 1:2:4 (Nominal mix) type B-1 (using 20 mm graded crushed stone aggregate) as slabs supported on walls, beams and columns, in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed. |
| 171 | Use and waste of form work to soffits of suspended slab such as roof slab, floor slab, landing and similar work not exceeding 200 mm thick surface horizontal or sloping, rough finished surface of concrete complete all as specified and directed. |
| 172 | Mild steel TMT bars 10 mm dia and over in reinforcement, cut to length, bent to shape required including cranking, bending spirally or hooping for columns, hooking ends and binding with and including mild Steel wire (annealed) not less than 0.9 mm dia complete all as specified and directed. |
| 173 | All as per ser item No 172 above, but 5 mm and over up to and including 10 mm dia in stirrups, spacers and binders complete all as specified and directed |
