Sales : +91-777 804 8217
| Sl. No. | Item Description |
| 1 | M&L for servicing/ maintaining of air compressor machine Cap 469M³/ Hr to 847M³/ Hr with 3 phase 415 volts 50 HZ motor complete with cleaning of air tank incl replacement ofdefective parts and lubricating oil to bring into proper serviceable condition of air blower complete all as specified and directed. |
| 2 | Allas per Srl item No 01.00 above butCap 49M³/ Hr to 297M³/ Hr withmotor complete all as specified and directed. Note for Item No. 1.00 to 2.00:-(i) Spare parts will be deemed to be included in above quoted rate, like Injection rings,distance ring, pressing ring, O-ring, tensioning element,oil seal, splash guard, intermediate guard,lock nuts and gaskets, washers, nut bolts etc .(ii) Spare parts like Bearing/bushes Lube oil for compressor, V beltswill be measured and paid seperately under relevant item of Sch A. |
| 3 | Supply only Ball bearing suitable for above Air compressor of469M³/ Hr to 847M³/ Hr capacity complete all as specified and directed. |
| 4 | Supply only Ball bearing suitable for above Air compressor of 49M³/ Hr to 297M³/ Hr capacity complete all as specified and directed. |
| 5 | Supply only Lube oil for Air compressor (air blower) Servo 320 complete all as specified and directed. |
| 6 | Supply only \"V\" belt suitable for above Air compressor of 469M³/ Hr to 847M³/ Hr capacity capacity complete all as specified and directed. |
| 7 | Supply only \"V\" belt suitable for above Air compressor of 49M³/ Hr to 297M³/ Hr capacity complete all as specified and directed. |
| 8 | M&L removing the submersible pump set (non clog) from existing position, Shifting to authorized workshop for repair work, dismantle / open, removing the burnt winding, cleaning rotor / stator, re-winding the motor with F classinsulation super enameled copper wire of size equivalent to the original winding including insulated packing materials, Varnishing, Drying, including replacement of both water seal,fill with new lube oil upto required level etc., checking of seat and replacement of seat ring ,checking for smoothness of motor running and clearance between impeller and casing ring and casing coverre-assembling the pumpset, installing back to the original position, testing and commissioning by thorough checking of electric circuit for proper protection of motor and run on full load for 4 hrs continuous running for the motor capacityof upto 3HP of any make with a warranty/guarantee of 06 months and the contractor rewinding the same without any extra cost to the deptt from the date of completion of testing hours complete all as specified and directed. |
| 9 | Allas per Srl item No 08.00 here-in-before butof 4.0 HP to 7.5 HP capacity complete all as specified and directed. |
| 10 | Allas per Srl item No 08.00 above but of 10HP to 15 HP capacity complete all as specified and directed. |
| 11 | Allas per Srl item No 08.00 above butof 20HP to25HP capacity complete all as specified and directed. |
| 12 | Allas per Srl item No 08.00 above butof 30HP to 40HP capacity complete all as specified and directed.Note for Item No. 08 to 12:-(i) Spare parts will be deemed to be included in above quoted rate, like gun metal neck ring, water seal compound and rubber bushes, and gaskets, washers, nut bolts etc.(ii) Spare parts like Bearing/bushes, impellerwill be measured and paid seperately under relevant item of Sch A. |
| 13 | Supply only Non clog impeller suitable for and upto 3HP submersible pump set complete all as specified and directed. |
| 14 | Allas per Srl item No 13.00 above butof 5.0 HP to 7.5 HP capacity complete all as specified and directed. |
| 15 | Allas per Srl item No 13.00 above but of 10HP to 15 HP to 20 HP capacity complete all as specified and directed. |
| 16 | Allas per Srl item No 13.00 above butmore than 25 to 30HP capacity complete all as specified and directed. |
| 17 | Allas per Srl item No 13.00 above but of 40HP capacity complete all as specified and directed. |
| 18 | Supply onlyupper/lower or back to back roller or Ballbearing suitable for and upto 3HP to 5HP non clog submersible pump/Mono block pump setcomplete all as specified and directed. |
| 19 | All as per Srl item No 18.00 above but 7.5HP to 15HP complete all as specified and directed. |
| 20 | All as per Srl item No 18.00 above but of 20 HP to 25 HP capacity complete all as specified and directed. |
| 21 | Allas per Srl item No 18.00 above but of 30HP to 40HP capacity complete all as specified and directed. |
| 22 | Supply only Stainless steel bush suitable for and upto 3HP non clog submersible pump set complete all as specified and directed. |
| 23 | Allas per Srl item No 22.00 above butof 5.0 HP to 7.5 HP capacity complete all as specified and directed. |
| 24 | Allas per Srl item No 22.00 above but of 10HP to 15 HP capacity complete all as specified and directed. |
| 25 | Allas per Srl item No 22.00 above butof 20HP to25HP capacity complete all as specified and directed. |
| 26 | Allas per Srl item No 22.00 above butof 30HP upto 40HP capacity complete all as specified and directed. |
| 27 | M&L for dismantling and removing the motor of the mono block / coupled Pump set or Air compressor from existing position, Shifting to authorized workshop for the repair work, removing the burnt winding, cleaning rotor / stator, re-winding the motor with super enameled copper wire of size equivalent to the original winding including insulated packing materials, Varnishing, Drying etc and installing back to the original position, testing and commissioning by thorough checking of electric circuit for proper protection of motor and run on full load for 4 hrs continuous running for the capacity of motor upto 3 HP of any make with a warranty/guarantee of 06 months and the contractor rewinding the same without any extra cost to the deptt from the date of completion of testing hours complete all as specified and directed. |
| 28 | Allas per Srl item No 27.00 above but of 5HP to 7.5 HP complete all as specified and directed. |
| 29 | All as per Srl item No 27.00 above butof 10 HP to 15HP complete all as specified and directed. |
| 30 | Allas per Srl item No 27.00 above butof 20 to 25HP complete all as specified and directed. |
| 31 | Allas per Srl item No 27.00 above but 30HP complete all as specified and directed. |
| 32 | M&L for Dismantling and removing the mono block / Coupled pump set from the existing position after disconnecting the inlet/outlet pipe connections, disconnecting the electric supply cables and transporting to repair work shop complete, opening the pump side, servicing the pump set including cleaning the shaft including replacement of worn out bearing, bushes, check nut, shaft sleeves etc. and installing back to the original position, testing and commissioning on full load for 4 hrs continuous running for the capacity of pump upto 3HP complete all as specified and directed. |
| 33 | Allas per Srl item No 32.00 above but5HP complete all as specified and directed. |
| 34 | All as per Srl item No 32.00 above butof 7.5HP upto 10HP complete all as specified and directed. |
| 35 | Allas per Srl item No 32.00 above butof 15HP upto 20HP complete all as specified and directed. |
| 36 | Allas per Srl item No 32.00 above butof 25HP upto 30HP complete all as specified and directed.Note for Item No. 32.00 to 36.00:-(i) Spare parts will be deemed to be included in above quoted rate, like gun metal neck ring, rubber coupling/metal coupling and rubber bushes, and gaskets, washers, nut bolts etc .(ii) Spare parts like Bearing/bushes, impellerwill be measured and paid seperately under relevant item of Sch A. |
| 37 | Supply only brass bush of suitable size for and upto 3HP mono block/Coupled pump set complete all as specified and directed. |
| 38 | Allas per Srl item No 37.00 above butof 5HP upto 7.5HP complete all as specified and directed. |
| 39 | Allas per Srl item No 37.00 above butof 10HP upto 15HP complete all as specified and directed. |
| 40 | Allas per Srl item No 37.00 above butof 20HP upto 30HP complete all as specified and directed. |
| 41 | Supply only new impeller of suitable size for and upto 3HP mono block / Coupled pump set complete all as specified and directed. |
| 42 | All as per Srl item No 41.00 here-in-before but of 5HP upto 7.5HP complete all as specified and directed. |
| 43 | All as per Srl item No 41.00 here-in-before but of 10HP upto 15HP complete all as specified and directed. |
| 44 | Allas per Srl item No 41.00 here-in-before but of 20HP upto 30HP complete all as specified and directed. |
| 45 | M&L in repairs for Gland packing of thickness upto 14mm complete all as specified and directed. |
| 46 | M&L in repairs Air Release valve, suitable size for mono block / Coupled pump set, made outof brass, as per site complete all as specified and directed. |
| 47 | M&L for Dismantling and removing the Screw pump set of capacity up to 5M³/ Hr from the existing position after disconnecting the inlet/outlet pipe connections and transporting to repair work shop complete, opening the pump , servicing the pump set including cleaning the shaft, replacement of worn out bearing, bushes, check nut, shaft sleeves etc. and installing back to the original position, testing and commissioning on full load for 4 hrs continuous running complete all as specified and directed. |
| 48 | Taking out andSupply install testing commissioiningnon clog submersible centrifugal pump cast iron casing having discharge 18.3 Q(m3/hr) and head 25 Mtr, SSimpeller with suitbale size 3 phase squirrel cage induction motor in water tight housing IP68, working voltage 415± 10% ,frequency 50±5%, The pump is provided with high and low liquid level controllers which avoids dry running of pump complete all as specified and directed. |
| 49 | M&L for cleaning and desiIting the sewage lift well of capacity 70 to 100 Cum, dewatering the complete well, removing Allthe deposited sludge, soil and other material from the well including bailing / pumping out muddy water from the well by manually or by providing suitable pump sets from bottom level of well, scrapping out the scales / deposits from inner surface of the well throughly, washing with bleaching powder and soda ash, cleaning / bailing out settled materials completely by any means and removing sludge to a distance up to 3 km out side of defence land limit and dispose off in low lying area including dewatering as required including whitewash the inner side of sump, painting with existing color on outside & writing \"Tank cleaned on ......(date) with 10 cm size white letter on black surface by engaging skilled artist using first quality synthetic enamel paint complete all as specified and directed. |
| 50 | Allas per Srl item No 49.00 here-in-before butmore than 100 CuM upto 200 CuM capacity lift well complete all as specified and directed. |
| 51 | Allas per Srl item No 49.00 above butmore than 200 CuM upto 350 CuM capacity lift well complete all as specified and directed. |
| 52 | Allas per Srl item No 49.00 above but for Equilisation tank of300 to 400 Cum capcity complete all as specified and directed. |
| 53 | Allas per Srl item No 49.00 above but for Equilisation tank of150 to 200 Cum capcity complete all as specified and directed.. |
| 54 | Allas per Srl item No 49.00 above butcleaning of complete Stilling chamber, Coarse screen chamber, Grit chamber upto 10 Cum capacity complete all as specified and directed. |
| 55 | Allas per Srl item No 49.00 here-in-before butMBBR tank of volume more than 50Cum to 100Cum complete all as specified and directed. |
| 56 | Allas per Srl item No 49.00 here-in-before butMBBR tank of volume more than 25 Cum to 50 Cum complete all as specified and directed. |
| 57 | Allas per Srl item No 49.00 here-in-before but STP secondary tube settler tank of volume 200 Cum at SRC complete all as specified and directed. |
| 58 | Allas per Srl item No 49.00 here-in-before but STP secondary tube settler tank of volume upto 112 Cum complete all as specified and directed. |
| 59 | Allas per Srl item No 49.00 here-in-before but Sludge tank of size 10mx10mx4.5m complete all as specified and directed. |
| 60 | Allas per Srl item No 49.00 here-in-before butSludge tank of volume upto 115 Cum complete all as specified and directed. |
| 61 | Allas per Srl item No 49.00 here-in-before butSTP CC tank(Chlorine contact) upto 25Cum complete all as specified and directed. |
| 62 | Allas per Srl item No 49.00 here-in-before but Treated water tank ofof Size 3.5mx3.5mx2.5 m approx complete all as specified and directed. |
| 63 | Allas per Srl item No 49.00 here-in-before but Treated water tank ofsize 15mx15mx4mtr approx complete all as specified and directed. |
| 64 | Allas per Srl item No 49.00 here-in-before butSTP CC tank(Chlorine contact) of size 4.5mX6.5mX3m approx complete all as specified and directed. |
| 65 | Allas per Srl item No 49.00 here-in-before but2 MLD STP Media filter tank complete all as specified and directed. |
| 66 | Allas per Srl item No 49.00 here-in-before butSTP tube settler tank of size 8.5mX4.5mX5m approx complete all as specified and directed. Note for item No 49.00 to 66.00 :- Contractor is to arrange his own diesel pump, T&P etc for cleaning purpose and minor spares and consumables like smallscrews, washers, grease, cleaning agents, consumables etc. is deemed to be included in the cost. The unit rate quoted deemed to be including draining of water with mechanical equipment and working in water and mud etc. The unit rate quoted deemed to be include Allsafety precautions which shallbe taken while working in STP tank / under ground sump. Making good to the damages during the cleaning of the tank is sole responsibilty of the firm. |
| 67 | M&L for opening of allthe inspection door of existing Dual Media filter of capacity 2 MLD STP plant and Activated carbon filter taking out / removing the existing totally impregnated / out lived internal filling filter media, layer wise, clening the entire filter throughly and painting with two coats of epoxybased anti corrosive paint internally and two coats of synthetic enamel paint externally, andopening of Header strainer pipe SS wire mesh for filtration ofwaste water received from chlorine contact tank (sewage treatment plant) cleaning of strainer pipe and incl replacement of worn out pipe of same size and S&F ofnew filter media and Activated carbon as per existing pattern with suitable quantity media in (cum) of different layers of fine sand ,coarse silex aggregate and filtration sand and setting back the filters for its proper function and testing complete all as specified and directed. |
| 68 | M&L for opening of allthe inspection door of existing Dual Media filter of capacity suitable 400 & 730 KLD STP, taking out / removing the existing totally impregnated / out lived internal filling filter media, cleaning the entire filter throughly and painting with two coats of epoxybased anti corrosive paint internally and two coats of synthetic enamel paint externally, andopening of Header strainer pipe SS wire mesh for filtration ofwaste water received from chlorine contact tank (sewage treatment plant) cleaning of strainer pipe and incl replacement of worn out pipe of same size and S&F ofnew filter media and Activated carbon as per existing pattern with suitable quantity media in (cum) of different layers of fine sand ,coarse silex aggregate and filtration sand and setting back the filters for its proper function and testing complete all as specified and directed. |
| 69 | M&L in repairs for 200mm dia ERW MS Pipe including specials, as per ISnot less than 5.4 mm thick duly painted with 2 coats of Anti Corrossive Synthetic enamel paint over a coat of Zync Chromate complete incl necessary flage, threding welding works etc. complete allas directed. Note :- Necessary flange, nut bolts, welding works, grinding, bend, reducer, gasketrates areincluded in the quoted rate. |
| 70 | Allas per Srl item No 69.00 above but 150 mm dia complete all as specified and directed. |
| 71 | Allas per Srl item No 69.00 above but 100 mm dia complete all as specified and directed. |
| 72 | Allas per Srl item No 69.00 above but 80 mm dia complete all as specified and directed. |
| 73 | Allas per Srl item No 69.00 above but 50 mm dia complete all as specified and directed. |
| 74 | M&L for Reinforced concrete pipes, class NP2, laid and jointed complete with collars of bore of pipe 400/450mm dia complete all as directed. Note:- Earth work will be measured and paid seperately under relevant items of sch. |
| 75 | M&L in repairs for 20mm bore GI tubing medium grade incl all fittings cutting and threaded in any length laid in trenches or fixed to walls complete all as specified and directed. |
| 76 | S&F in repairs for hand gear butterfly valve with CI Disc and neoprene lining, 200mm dia ISI Marked, of pressure rating not less than 15Kg/cm² flanged type including necessary heavy duty gasket, GI Bolts, GI Nuts, GI Washers etc. complete all as specified and directed. |
| 77 | Allas per Srl item No 76.00 above but 150mm dia complete all as specified and directed. |
| 78 | Allas per Srl item No 76.00 above but 100mm dia complete all as specified and directed. |
| 79 | Allas per Srl item No 76.00 above but 80mm dia complete all as specified and directed. |
| 80 | Allas per Srl item No 76.00 above but 50mm dia complete all as specified and directed. |
| 81 | M&L in repairs Dual plates CI wafer type Non Return / Check Butterfly valve, 100 mm bore tested to pressure of 15Kg/Sqcm flanged type including necessary heavy duty gasket, GI Bolts, GI Nuts, GI Washers etc. complete all as specified and directed. |
| 82 | Allas per Srl item No 81.00 above but 80mm dia complete all as specified and directed. |
| 83 | Allas per Srl item No 81.00 above but 50mm dia complete all as specified and directed. |
| 84 | M&L for preparing the surface by scrapping the old painting and removing the grease, oil, dirt, algae etc. Painting of outer surfaces of MS pipes with one coat of black paint over a coat of Zinc Chromate complete incl its MS supports / clamps / nuts / bolts and marking / writing flow arrows and name with white paint by skilled painter Allas directed of size 250/300 mm dia complete all as specified and directed. |
| 85 | Allas per Srl item No 84.00 above but 150 to 200mm dia complete all as specified and directed. |
| 86 | Allas per Srl item No 84.00 above but 80 to100mm dia complete all as specified and directed. |
| 87 | Allas per Srl item No 84.00 above but20 to 50mm dia complete all as specified and directed. |
| 88 | M&L for preparing the surface by scrapping the old painting and removing the grease, oil, dirt, algae etc. Painting of outer surfaces of MS gate of size upto 2x2 mtr apprx with one coat of black paint over a coat of Zync Chromate complete all as specified and directed. |
| 89 | M&L for preparing the surface by scrapping the old painting and removing the grease, oil, dirt etc, Spray painting with one coat of super enameled anti corrosive paint of approved colour, over a coat of auto primer on external metallic surfaces incl frame / base channel complete all as directed for Air Compressor upto Cap 49M³/ Hr to 297M³/ Hr including motor complete all as specified and directed. |
| 90 | Allas per Srl item No 89.00 here-in-before butfor Air Compressor Cap 469M³/ Hr to 847M³/ Hr including motor complete all as specified and directed. |
| 91 | All as per Srl item No 89.00 above but centrifugal pumpset, monoblock or coupled of capacity upto 7.5 HP complete all as specified and directed. |
| 92 | Allas per Srl item No 89.00 above but10HP to 20HP complete all as specified and directed. |
| 93 | S&F in repair and connect, MCB SP 6 to 32 A, AC, 240V,10KA \"C\" curve ISI Marked complete all as specified and directed. |
| 94 | S&F in repair and connect, MCB SPN, 32A, AC, 240V, 10KA \"C\" curve ISI Marked complete all as specified and directed. |
| 95 | S&F in repair and connect MCB TPN/4P, 16 to 32A, AC, 415V, 10KA \"C\" curve ISI Marked complete all as specified and directed. |
| 96 | S&F in repair and connect, MCB TPN/4P, 40 to 100A, AC, 415V,10KA \"C\" curve ISI Marked complete all as specified and directed. |
| 97 | S&F in repairs and connect, Motor Protection Circuit Breaker 3 pole, 415 V, 50/63 Amps, with over load relay range 40 to 80 Amps complete all as specified and directed. |
| 98 | Allas per Srl item No 97.00 above but25 Amps with over load release range 20 to 32 Amps complete all as specified and directed. |
| 99 | S&F in repairs and connect, Single Phase Preventer suitable for motor protection complete all as specified and directed. |
| 100 | S&F in repairs and connect, 3 phase MU/ML type Contactor 10 Amp 415V with 230V coil complete all as specified and directed. |
| 101 | S&F in repairs and connect, 3 phase MU/ML type Contactor 16 Amp 415V with 230V coil complete all as specified and directed. |
| 102 | S&F in repairs and connect, 3 phase MU/ML type Contactor 25 Amp 415V with 230V coil complete all as specified and directed. |
| 103 | S&F in repairs and connect, 3 phase MU/ML type Contactor 32/40 Amp 415V with 230V coil complete all as specified and directed. |
| 104 | S&F in repairs and connect, 3 phase MU/ML type Contactor 50/60 Amp 415V with 230V coil complete all as specified and directed. |
| 105 | S&F in repairs and connect, 3 phase MU/ML type Contactor 63/80 Amp 415V with 230V coil complete all as specified and directed. |
| 106 | S&F in repairs and connect, NO-NC auxiliary contact block suitable for 10 to 25A 3 phase contactors complete all as specified and directed. |
| 107 | S&F in repairs and connect, NO-NC auxiliary contact block suitable for 32 to 63A 3 phase complete all as specified and directed. |
| 108 | S&F in repairs and connect, No volt coil 230V, suitable for 3 phase 415V Contactors complete all as specified and directed. |
| 109 | S&F in repairs and connect, Plug in control relay 8 pin 24V DC/240 volts AC 9.5 KΩ with socket & clamp base two/three Change overin build mechanical indicator/latching facility and 1 NO-1NC, suitable for AC/DC complete all as specified and directed. |
| 110 | S&F in repairs and connect, over load Relay 3 Phase, 415V, 1.4 Amp to 6.0 Amp complete all as specified and directed. |
| 111 | S&F in repairs and connect, over load Relay 3 Phase, 415V, 25 Amp to 40 Amp complete all as specified and directed. |
| 112 | S&F in repairs and connect, DOL starter suitable for upto 5HP motor, 3 Phase, 415 V, with 1Ø preventer and thermal relays complete all as specified and directed. |
| 113 | S&F in repair copper cable 1.5 Sqmm copper multistandard PVC insulated FR, 1100V grade complete all as specified and directed. |
| 114 | S&F in repair copper cable 2.5 Sqmm copper multistandard PVC insulated FR, 1100V grade complete all as specified and directed. |
| 115 | S&F in repairs, 1100 volts grade heavy duty PVC sheathed stranded Aluminium conductor twin core cable flat or circular of size 6 Sqmm. complete all as specified and directed. |
| 116 | S&F in repairs, testing Volt meter 0-500 Volts, 96mm x 96mm, digital type with three way ON / OFF rotary type selector switch complete all as specified and directed. |
| 117 | S&F in repairs, testing Amp meter 0-400 Amps, 96mm x 96mm, digital type with three way ON/OFF rotary type selector switch complete all as specified and directed. |
| 118 | S&F in repairs, testing RYB pilot lamps LED type with integral circuit & cluster LED suitable for operating at 240 /220 Voltscomplete all as specified and directed. |
| 119 | S&F in repairs, Pressure Gauge, 100mm dia, 0-14 Kg/cm² pressure rating complete all as specified and directed. |
| 120 | All as per Srl item No 119.00 here-in-before but0-21 Kg/cm² complete all as specified and directed. |
| 121 | Supply and Laying in trenches or fixed to wall / pole, XLPE insulated, screened, PVC bedded, galvanised steel strip or wire armoured, electric power cables (heavy duty) with aluminium conductor, 1100 volts, grade laid in trenches/ fixed in wall / pole of cross sectional area of cable 50 Sqmm 3.5 core incl taking down old unsv cable complete all as directed. |
| 122 | M&L for cutting hard standing / Road cutting for taking up or laying of LT UG cable upto a depth of 15 cm and after laying of cable, well ramming to the excavated soil and repair the cutting / excavated portion of road by providing PCC (1:2:4) type B1 (using 20mm graded stone aggregate) complete all as specified and directed. Note: Excavation below the depth of 15 cm shallbe measured and paid seperately under relevant items. |
| 123 | S&F in replacement, heavy duty cloth strips of filter press as perexisting frame with 500 GSM with complete overhauling of filter press incl testing complete all as specified and directed |
| 124 | S&F in replacement, Rotometer / Air flow indicator as per existing at site including required minor spares and T&P complete all as specified and directed |
| 125 | M&L for removing of manhole cover, cleaning / removal of sludge / solid wastes / debries in any quantity from any depth which is blocking the smooth flow of sewage lines , well flushing, incl disposal of removed sludge / waste material to designated local body approved places and refix the man hole cover in same position complete all as specified and directed. Note: Necessary T&P and consumables shallbe inclusive in the rate quoted. |
| 126 | M&L for removing of manhole cover, cleaning / clearing the blocks of sewage lines by providing using split bamboo / solid pvc pipes or any other means for removal of blockage by debries / sludge / solid waste including well flushing for smooth gravity flow of sewage and refix the man hole cover in same position for 300 mm to 400 mm dia RCC / SGSW pipecomplete all as specified and directed. |
| 127 | Allas per Srl item No 126.00 above here-in-before but 150mm to 250mm dia complete all as specified and directed.Note for Item No 125.00 to 127.00 :- Necessary T&P and consumables shallbe inclusive in the rate quoted. |
| 128 | M&L for precast RCC rectangular man hole cover of size 100cm x 45cm x 7.5cm thick made out of PCC 1:2:4 type B1 using 20 mm stone aggregate with 8 mm dia steel rod, 75mm c/c incl binding wire and 2 Nos of lifting handle moveable type incl dismantling of old broken and removal of debries from site complete all as specified and directed. |
| 129 | Allas per Srl item No 128.00 here-in-before butcircular of size 80cm dia x 7.5cm thick complete all as specified and directed. |
| 130 | M&L for Structural Steel Work, made out ofFe 410-W (Gde-E-250) quality-A Rolled Mild Steel Channel, Angle or Tee Sections, MS sheet with hinges & locking arrangementsetc. cut to shape / ordinary length, drilled and countersunk for Screws / Bolts, including bending and welding duly painted with 2 coats of Anti Corrossive Synthetic enamel paint over a coat of Zync Chromate as in framed work with MS Sheet cover complete all as specified and directed. |
| 131 | M&L for Cement concrete for coping / support / foundation of GI pipes, Pumpsets etc. incl necessary breaking or digging of floor, Type B1, 1:2:4, using 20 mm graded stone aggregateincl necessry form work and finish to exposed surface complete all as specified and directed. |
| 132 | S&F in replacement, heavy duty manually operated chain pulley block 1 Ton capacity, 10 Mtr standard lift witn testing complete all as specified and directed. |
| 133 | S&F in replacement, heavy duty manually operated chain pulley block 5 Ton capacity, 10 Mtr standard liftwith testing complete all as specified and directed. |
| 134 | S&F in replacement, HDPE virgin FAB PP white/black media Cylindrical/circular shape - wagon wheel design having external fins , surface area - 350m2/m3 ,non toxic ,having specific gravity of 0.9-0.92 gms/cm3, voltage greater 98%, media fill range 25-55 %particle complete all as specified and directed. Make : M/s Ion exchange/M/S Thermax Ltd/M/S Rudraksha Envirotech |
| 135 | Supply only DWPE (Dewatering Polyelectrolyte) powder, pack of 10/25 Kg in polythene bags/HDPE drums complete all as specified and directed. |
| 136 | Supply only CHLORINE 65%-70% calcium based granular, disinfectant for STP water, pack of 40/45 Kg in HDPE drums complete all as specified and directed. |
| 137 | Supply only Sodium Hypo Chloride (10%) in Liquid form, as purifier of STP water, packing in 50 Ltr Can complete all as specified and directed. |
| 138 | Supply only Calcium Hydroxide (Lime, 80-85%) in Powder form as pH Booster for STP water, packing in 40 Kg Sacks complete all as specified and directed. |
| 139 | Supply only Bacteria culture in PVC shells suitable for MBBR type plant complete all as specified and directed. |
| 140 | S&F in replacement of Hexagonal (Chevron) shape tube settler media made out of UV stabalized virgin base PVC , height 700 mm after fixing , cross section of horizontal 120 mm and vertical 48 mm , tongue and groove fixed 1.0 mm thick having plan settling area of 12 - 14 m2/m3 , minimum weight of 64 Kg/m3 including taking out existing unseviceable media of any decription , replacement of Unsv Mild steel supporting frame and draining out of sludge complete all as specified and directed.Note :Rate of Replacement of Mild steel supporting frame and draining out of sludge will be included in item. |
| 141 | Supply & fixing in replacement of Tube settler V notch in 150 mm x 150 mm C section suitable length in mm long made out of mild steel epoxy coated including taking out existing V notch of any decription complete all as specified and directed. |
| 142 | Supply only DAP fertilizer for day to day use in sewage treatment plant complete all as directed. |
| 143 | Supply only Molasses (Sheera) for day to day use in sewage treatment plant complete all as directed. |
| 144 | Supply only Poly aluminium chloride chemical for day to day use in sewage treatment plant complete all as directed. |
| 145 | S&F of LT submersible copper conductor cable of size 16 sqmm 3 core complete all as specified and directed. |
| 146 | S&F of LT submersible copper conductor cable of size 6 sqmm 3 core complete all as specified and directed. |
| 147 | S&F of LT submersible copper conductor cable of size 10 sqmm 3 core complete all as specified and directed. |
| 148 | M&L for cutting and removing of grass/bushes etc of any height grown inside STP premises and surrounding lift wells to keep the site clean and to carryout day to day maint and operations safely, grass cutting to be done as per site requirements & to the satisfactory levelall as directed. |
| 149 | S&F street/security light fitting of any description, supply, fix and connect 45 watts LED integrated street / security light fitting with Allaccessories alongwith 32 mm GI bracket with suitable clamps, bolts, nuts & washers incl provision of two core 2.5 Sqmm stranded Aluminium conductor cable of suitable length complete all as specified and directed. |
| 150 | Taking down unsv street light loop-in and loop out box & supply, fix and connect, factory made out door type syntex street lightbox comprising with suitable size of bus bar, insulators, connectors with one C curve 6 Amp MCB SP, one PVC way connector etc. incl suitable size clamps, nuts, bolts & washers complete all as specified and directed. |
| 151 | M&L for Scraping, cleaning and preparation of old surfeces of steel tubular pole (9 Mtr long) complete and applyingone coat of aluminium paint over a coat of Zinc Chromate complete all as specified and directed. |
| 152 | M&L for Earthing complete with galvanised steel earth plate electrode 60cmx60cmx6mm thick burried directly in ground (Earth pit not less than 2.25M deep below ground level) with top edge of earth plate 1.5M deep below normal ground level connected to GI earth strip 32x6mm by means of bolts, nuts,check nuts and washers of galvanised iron or steel incl necessry excavation, earth work in any type of soil, 1:3:6type C1 PCC chamber, RCC chamber cover, watering pipe, funnel etc Allas shown in electrical plate No 3 of SSR part I connected to earthing test point Allas indicated including testing on completion complete all as specified and directed.Note:- Earth strip upto 7.5mtr deemed to be included in above quoted rate. |
| 153 | S&F fine bubble air diffuser of size 3\" dia, 1 mtr long complete all as specified and directed. |
| 154 | M&L for attending complaints by deploy an expert/ skilled technican to check the fault of Electric control panels/motors/pumps of any type installed at STP & Liftwells for any non functional of electronic/ electric control switches, metering equipment, circuit control wiring and rep/ replacement of necessary items to bring the panel system into serviceable state all as directed.Note:- (i) Spare parts measured and considered under relevant item of Sch\"A\".(ii) Contractor shall be penalised @ Rs 5000/- per complaint per day, if he fails to attend the complaint within 12 hours. |
| 155 | M & L for commissioning and testing of chemical earth pit (pipe in pipe) including copper earth electrode (CPRI tested for short time current testing 21.4 KA rms for 2 sec) anti corrosive long life electrode in the earth pit and of standard ISI marked medium grade GI pipe, outside secondary conductor inside 21 mm dia 3 meter length including boring ready to install with suitable connecting terminal. Using copper strip 32 mm x 4 mm and protected by light grade50 mm dia bore GI pipe upto test point. Inner pipe shall be 12 SWG thick and the outer pipe shall be 10 SWG thick. The galvanised coating for the inner pipe shall be 40 - 50 microns and the outer will be 80 - 100 microns. Filling compound between the pipe shall be crystalling conductive mixture, mixture, the back filling of the earth pit shall be done with a mixture of (min 50 Kg) having resistivity value 2 ohm meter to enchance the fault current dissipation into surrounding soil additional special alloy coating of 300 mm from the top of the electrode including the terminals complete all as specified and directed |
| 156 | M&L test point terminal block made of gun metal or phosphoras of size 75 x 75 x 25mm drilled and screwed including 3 No\"s 08 mm dia, 25mm long hex heat screws including sheet metal box of suitable size complete all as specified and directed. |
| 157 | S&F for fixing the Air termination, single pointed aluminium rod 12mm dia and 300mm long complete all as specified and directed. |
| 158 | M&L for making good the damaged portion of PCC work, with suitablePCC 1:2:4 type B-1 including of chamber cover as per site requirement complete all as specified and directed. |
| 159 | M&L earth continuity of main earthing lead fixed to wall on batten or recess or chases or buried in ground or drawn in conduit / pipe or fixed to poles or any other indicated situation for loop earthing etc as required of size 20 x 3mm copper strip with fixed saddles complete all as specified and as directed. |
| 160 | Allas per Srl item No 159.00 here-in-before but of 25 x 3mm aluminium strip complete all as specified and directed. |
| 161 | S&F of Flame proof light fitting batten including LED tube of 20W of CIMFR certified, IP 65 protected complete all as specified and directed. |
| 162 | S&F of Flame proof lintegral well glass light fitting suitable to fixed on wall of capcity 60W, IP 65/66 protected complete all as specified and directed. |
| 163 | S&F flame proof rotary switch for ON & OFF flame proof lighting of 10A rating, IP 65/ 66 protect complete all as specified and directed. |
| 164 | S&F flame proof switch socket combine of 16 to 32A rating, IP 65/66 protect complete all as specified and directed. |
| 165 | S&F in replacement horizontal double mounting siren range 2 KM audible ,AC 230V, including suitable HP motor complete all as specified and directed. |
| 166 | Supply and fixing Mechanical seal for CRI Vetical Pump complete all as specified and directed. |
| 167 | Supply and fixing water level controller with 3 mtr wire length complete all as specified and directed. |
| 168 | Draining out the old engine oil from DG set, cleaning of sump deposits and rectifyingleakages if any, by means ofwelding, brazing and Supply and filling of new engine oil 10W-30 complete all as specified and directed. |
| 169 | M&L for Opening /taking out of fuel injection pump (FIP) of DG Set of any type/make of capacity 15 KVA to 82.5 KVA, disconnecting of fuel injector line, carrying complete overhauling /servicing of injecor pump, calibrationof fuel pump as per manufacturer instruction , assembling of the same with DG Set properly in original position, checking the allignment, making proper fuel connection including renewal of unserviceable/defective minor parts like seal, \"O\" ring, fuel pump gaskit, gear, technometer, bushing, technometer cover, fuel pump, gear housing, fuel pump gear etcand testing for smooth operationcomplete all as directed, after renewalof followingmajor parts if found defected/unserviceable :- NoteFollowing items measured & Paid seperately. |
| 170 | S&F in repairs self starter for DG Set of capacity 15 KVA to 82.5 KVA, fixing at site complete all as specified and directed. |
| 171 | M&L for \"B\" check of DG set 15 KVA to 82.5 KVA complete all as specified and directed. |
| 172 | S&F ( in repairs)element Air cleaner for DG set cap 15KVA to 82.5 KVA complete all as specified and directed. |
| 173 | S&F ( in repairs)element Fuel filter for DG set cap 15KVA to 82.5 KVA complete all as specified and directed. |
| 174 | S&F ( in repairs)element lub oil filter for DG set cap 15KVA to 82.5 KVA complete all as specified and directed. |
| 175 | Taking out and S&F in repair of battery terminals made of brass, suitable for battery of any type /make and capacity, complete all as specified and directed. |
| 176 | S&F battery charger heavy duty suitable for charging of battery 12 Volts 100/150/60 AH with charging current 0-10 Amps, input voltage 230 Plus complete all as specified and directed. |
| 177 | M&L distilled water in sealed packing for DG set 12 volts battery complete all as specified and directed. |
| 178 | S&F (in Replacement)of faulty battery charging sets 12V DC automatic type, fixed in DG set /panel with transformer and rectifier etc including rewiring of faulty control complete all as specified and directed. |
| 179 | S&F in replacement of Automatic voltage Regulator (AVR) suitable for DG Set of 63 to 82.5 KVA capacity with and including taking out old AVR and making all connection testing for smooth operation complete all as specified and directed. |
| 180 | S&F in replacement of Automatic voltage Regulator (AVR) suitable for DG Set of 15 to 40 KVA capacity with and including taking out old AVR and making all connection testing for smooth operation complete all as specified and directed. |
| 181 | Renewalof asbestos rope of 19 mm dia around of the exhaust pipe of diesel engine any capacity complete all as specified and directed. |
| 182 | M&LEarthing complete with galvanised mild steel earth plate electrode 600x600x6mm thick, burried directly in ground to a depth not less than 4.5 metres deep below ground level with top edge of earth plate not less than 3.75 metre below normal ground level surrounded with adequate quantity of charcoal dust mixed with salt to a packed thickness of 15 cm all around the plate, using GI strip 32 x 6 mm as earth strip electrode bolted or rivetted to earth plate at one end and connected , GI earth strip encased inand including 40 mm dia GI \"lightgrade\" pipe from upper end of earth plate upto equipments,20mm dia bore GI pipe \"mediumgrade\" as water pipe from earth chamber to upper edge of earth plate,GI funnel with wire mesh fixed on water pipe andPCC 1:2:4 type B-1 (using 20mm graded stone aggregate) as in pit chamber and RCC pit cover 50mm thick precast RCC 1:2:4 type B-1, duly reinforced with MS round bars 8mm dia @ 150 c/c both ways with 6mm dia MS round bar as in lifting handles, and mild steel angle iron frame 40mmx40mmx5mm for pit cover ,excavation, earth work including laying the GI pipe concealed in floor/wall all as describedin electric plate number 3 of SSR Part I completeall as specified and directed and testing on completion. Note :- Ifthe desired earth resistance is not found, earthing shall be redone by the contractor at no extra cost to the department. |
| 183 | M&L Cement concrete in foundations, filling and mass concrete PCC 1:4:8 D2 type for foundation incl taking down existing one all as specified and directed. |
| 184 | S&F in repair andtesting 100 Amps, 415V, 4 pole off load changeover switch with sheet metal enclosure, frontoperated, 50 Hz, fixed to walls/ panels with suitable size clamps, nuts, bolts and washers complete all as specified and directed including making connections and testing complete all as specified and directed. |
| 185 | Supply Fix & testingStator assembly with casing and copper winding three phase 15 KVA capacity DG set complete all as specified and directed. |
| 186 | Supply Fix & testing Rotor assembly three phas for 15 KVA capacity DG set complete all as specified and directed. |
| 187 | Supply only Exciter complete all as specified and directed. |
| 188 | Supply only Rectifier plate with diod assembly complete all as specified and directed. |
| 189 | Supply only Slip ring voltage regulator complete all as specified and directed. |
| 190 | M&L in repairs for HDPE pipe of pressure rating 10 Kgf / Sqcm incl allfittings in any length with fusion joint laid in trenches / fixed to walls allas directed of size 50mm bore complete all as specified and directed. |
| 191 | Supply Fix & testing Cast Iron Body with Rubber Ball Type Foot Valve, Heavy Duty 100mm incl taking down old u/s Foot Valve all as directed. |
| 192 | S&F in repairs and connect, Soft Starter suitable to 5HP Non clog submersibale pump is designed to efficiently control the Starting & Stopping of three-phase pump with its advanced motor protection features and intelligent control algorithms, Built-in bypass contractor,Full graphical display, USB port for commissioning and data extraction complete all as specified and directed. |
| 193 | S&F in repairs and connect, Soft Starter suitable to 10HP Non clog submersibale pump is designed to efficiently control the Starting & Stopping of three-phase pump with its advanced motor protection features and intelligent control algorithms, Built-in bypass contractor,Full graphical display, USB port for commissioning and data extraction complete all as specified and directed. |
| 194 | Supply , install, of factory made Terminal Junction box chamberof size 400mmx 400mmx250mm out door type with mounted Heavy duty terminal block,12 Way, 100Amp 1100 Volts grade,3 phase, 415 Volts ,50 hz,AC supply with including suitable space for 6 xincoming & 6 x outgoing copper cables. terminal box made of CRCA sheet 3.15mm thick outdoor type powder coated, front side opening, shutter , cable opening form bottom side, hinges with locking arrangement, including grounting & PCC foundation work complete including taking down old unserviceable Panel/Terminal box and making good the floor/surface as per existing all as specified & as directedby Engr-in-charge. Note :- TheTerminal Junction box shall beFRONT operated, with cable entry from the bottom . Quoted rate also include dressing of existing cable.) |
| 195 | S&F of Armoured copper conductor cable of size 6 sqmm 3 core 1100 volts clamping and fixed to wall/pole/in ground or air including lugs,thimbles complete all as specified and directed. |
| 196 | S&F of Armoured copper conductor cable of size 10 sqmm 3 core 1100 volts clamping and fixed to wall/pole/in ground or air including lugs,thimbles complete all as specified and directed. |
| 197 | S&F of Armoured copper conductor cable of size 16 sqmm 3 core 1100 volts clamping and fixed to wall/pole/in ground or air including lugs,thimbles complete all as specified and directed. |
| SR No | FileName | File Description |
| 1 | Click here to download tender document | Tender Documents |
| 2 | Click here to download tender document | Tender Documents |
| 3 | Click here to download tender document | Tender Documents |
| 4 | Click here to download tender document | Tender Documents |
| 5 | Click here to download tender document | Tender Documents |
| 6 | Click here to download tender document | Tender Documents |
| 7 | Click here to download tender document | Tender Documents |
We are a group of professionals specializing in custom software development, web development, mobile app development, IOT base solutions, web design, graphics & Enterprise solutions provid.
Copyright © 2025 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
