|
| 1 | Dismantling/ demolition posts or struts embedded in soil or concrete etc (wood, steel or RCC) any section, including taking out embedded portion and making good disturbed ground complete all as specified and directed. |
| 2 | Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed. |
| 3 | Excavation in post holes (or similar holes) n exc 0.5 cum getting out in soft/ loose soil returning filling in and ramming earth or broken rubble mixed with earth around in layers n exc 25cm and covering and removal of surplus soil n exc 50m and making good surface complete all as specified and directed. |
| 4 | M&L for cement concrete type D-2, 1:4:8 (using 40mm graded stone aggregate) in foundations, filling and mass concrete complete all as specified and directed. |
| 5 | S&F hand rails, half round or other steel section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, for doors, balusters,nosingtosteps includingembeddinginconcrete and screwing etc. wind ties for roofincluding securing bolts; posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc; flat iron fillets (for securing wire mesh etc) including all necessary drilling, bolting or riveting, etc including embedding in concrete and similar work conforming to Fe-290 Gde-E-165 complete all as specified and directed. |
| 6 | S&F 23-25mm factory made single extruded WPC (Wood Polymer Composite) solid plain white colour board Jali and design as approved by GE, which are machine 3D cut for duct/shaft covering, partitions and facades comprising of virgin Polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650kg/cum and screw withdrawal strength of 1800 N (Face) minimum compressive strength 56 N/mm2 , modulus of elasticity 850 N/sqmm and resistance to spread of flame of Class A category with properties of being termite/borer proof, water/moisture proof and fire retardant and GRIHA certified. fixing on M.S (Mild Steel) frame made of required square hollow box section approved by engineer-in-charge including applying a priming coat of approved steel primer, places at grid made at 1.0 X 1.0 m or as per requirement at site with necessary stainless steel fasteners and SS screws etc., complete all as specified and directed.Note:- MS frame work with priming coat shall be paid separately. The manufacturer should be ISO 9001:2015 Quality Management System Certification and ISO 14001:2015 Environmental Management Systems with in-house testing facility and should have their own manufacturing plant in India complete all as specified and directed. |
| 7 | M&L for preparation of new or previously untreated steel surfaces over 10cm in width or girth and applying two coats of synthetic enamel paint over and including one coat of red oxide complete all as specified and directed. |
| 8 | M&L for preparation of new or previously untreated steel Surfaces of any description wood, steel, iron, concrete, brick, stone, etc., exceeding 10cm in width or girth and applying a coat of black bituminous paint complete all as specified and directed. |
| 9 | M&LforProviding and laying 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in foot parth, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks over and including 25mm thick sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand complete all as specified and directed. |
| 10 | M&L for 50mm PCC 1:4:8 type D2 (40mm graded aggregate) in sub base complete all as specified and directed. |
| 11 | Demolition of cement concrete (unreinforced) of any description andin any position not otherwise specifically provided for, complete all as specified and directed. |
