Tender For Supply Of Cath Lab Consumables, Palakkad-Kerala

TDR : 53106828

Tender Notice
BOQ

13 Days Left

Palakkad , Kerala

Tender Brief : Tender For Supply Of Cath Lab Consumables

Document Fees
₹ 25000 /-

EMD
₹ 376200.0 /-

Tender Value
Refer document

Submission Date
07-01-2026

Competition Type
Indian

Bidding Type
Tender

Need a Business Loan? Apply Now !


1	Coronary stents/ Scaffolds
2	DES, EVEROLIMUS,FDA APPROVED PLATINUM CHROMIUM PLATFORM
3	DES, EVEROLIMUS,FDA APPROVED PLATINUM CHROMIUM PLATFORM POLY-VINYLIDENE FLUORIDE-HEXAFLUOROPROPYLENE ( PVDF-HFP)POLYMER
4	DES, EVEROLIMUS, FDA APPROVED PLATINUM CHROMIUM PLATFORM, BIOABSORBABLE POLYMER PLGA
5	DES, EVEROLIMUS, FDA APPROVED COBALT CHROMIUM PLATFORM Stent length up 12 mmto 38mm
6	DES, EVEROLIMUS HYPOTUBE BALLOON TECHNOLOGY, FDA APPROVED COBALT CHROMIUM PLATFORM Stent length up to 48mm
7	DES, EVEROLIMUS, FDA APPROVED CTO STENT COBALT CHROMIUM PLATFORM, FLUOROPOLYMER ,2.25MM-4.25MM DIAMETER
8	DES, EVEROLIMUS, ONLY DCGI COBALT CHROMIUM PLATFORM, 50 MICRON STRUT THICKNESS
9	DES, EVEROLIMUS, ONLY CE APPROVED COBALT CHROMIUM PLATFORM with 55 to 70 micron strut
10	DES, EVEROLIMUS, ONLY DCGI COBALT CHROMIUM PLATFORM with 55 to 70 micron strut
11	DES, EVEROLIMUS, ONLY DCGI COBALT CHROMIUM PLATFORM
12	DES, EVEROLIMUS, CE/DCGI APPROVED with length 8mm to 52 mm & diameter of 2.00 mm to 4.50 mm.Crest :6 Valley to Valley connectors:2. Material : L605 alloy (Cobalt Chromium). Design : Open Cell Strut thickness : 60 mm ± 10 µm/ Strut width : Struts: 65 ± 10 µm Proximal shaft markers: 90 cm & 100 cm NBP: 9 atm / (RBP): 16 atm/ RBP 14atm (SE-Mkr)<0.5mm (at both sides, proximal & distal).
13	DES, EVEROLIMUS, CE/FDA/DCGI approved cobalt chromiumbiodegradable polymer, 60 micron strut with dual long Z link Technology and Tetrinium Design with cumilative drug release technology:length: 8,12,16,20,24,28,32,36,40,44,48, sizes:2,2.25,2.5,2.75,3,3.5,4,4.5
14	DES, sirolimus, CE/FDA/DCGI approved cobalt chromiumbiodegradable polymer, 60 micron strut with dual long Z link Technology and Tetrinium Design with cumilative drug release technology:length: 8,12,16,20,24,28,32,36,40,44,48, sizes:2,2.25,2.5,2.75,3,3.5,4,4.5
15	DCGI approved Biodegradable polymer based everolimus eluting Coronary stent system with differencial stent architecture of 6 crown design for 2 - 2.75 mm , 8 crown for 3-3.5 & 10 crown design for 4-4.5 mm Length : 8 mm ,13 mm.16,19,24,29,32,37,40,44,48. Diameter : 2,2.25,2.5,2.75,3,3.5,4,4.5
16	DCGI Approved DES, Everolimus stent systum with cobalt chromium 65 micron strut thickness size: 2.25,2.5,2.75,3,3.5,4,4.5 length: 8 to 48 mm
17	DES , EVOROLIMUS L 605 COBALT CHROMIUM, Biodegradable polymer, DCGI approved, 60 micron struts with open & closed design,3µm coating thickness size 2.25 -5 mm ,length -8-48 mm
18	DES, EVEROLIMUS, ONLY DCGI COBALT CHROMIUM PLATFORM, 63 MICRON STRUT THICKNESS
19	DES, BIOLIMUS, FDA APPROVEDCOBALT CHROMIUM PLATFORM
20	DES, BIOLIMUS, CE APPROVEDCOBALT CHROMIUM PLATFORM
21	DES, BIOLIMUS, ONLY DCGI APPROVED COBALT CHROMIUM PLATFORM,60 micron strut
22	DES, ZOTAROLIMUS, FDA APPROVED COBALT CHROMIUM PLATFORM ,POLYMER TYPE -BIOLINX
23	DES, ZOTAROLIMUS, CE APPROVED COBALT CHROMIUM PLATFORM POLYMER TYPE -PHOSPHORYLCHOLINE
24	DES, ZOTAROLIMUS, ONLY DCGI COBALT CHROMIUM PLATFORM HYDROPHILIC POLYMER
25	DES, ZOTAROLIMUS ELUTING CORONARY STENT SYSTEM WITH CORE WIRE AND CONTINUOUS SINSOID TECHNOLOGY, COBALT ALLOY, PLATINUM IRIDIUM CORE,
26	DES, SIROLIMUS, FDA APPROVED COBALT CHROMIUM PLATFORM
27	DES,Serolimuseluting CE APPROVED, cobalt chromium stent
28	DES, SIROLIMUS, ONLY DCGI APPROVED COBALT CHROMIUM PLATFORM
29	DES, SIROLIMUS, FDA APPROVED STAINLESS STEEL PLATFORM
30	DES, SIROLIMUS, CE APPROVED STAINLESS STEEL PLATFORM
31	DES, SIROLIMUS, ONLY DCGI APPROVED STAINLESS STEEL PLATFORM
32	DES,sirolimus , 65 micron strut , hybrid design with proximal main branch segment and distal tapered side branch segment
33	DES,Sirolimus,cobalt chromium (Any diameter / any length)
34	CE approved Biodegradable polymer based Sirolimus eluting Coronary stent system with differencial stent architecture of 6 crown design for 2 - 2.75 mm , 8 crown for 3-3.5 & 10 crown design for 4-4.5 mm Length : 8 mm ,13 mm.16,19,24,29,32,37,40,44,48. Diameter : 2,2.25,2.5,2.75,3,3.5,4,4.5
35	Tapered DES, SIROLIMUS coronary stent with biodegradable polymer
36	Stainless Steel Abluminally coated Sirolimus Eluting Coronary Stent with microporous surface & low biodegradable polymer with temperature controlled packing and temperature monitoring device--CE Approved
37	Polymer free Dual Drug sirolimus and Probucol eluting Stent technology with Microporous surface Abluminal coating and Shellac resin with diameters 2mm-4mm and length 8mm-48mm- DCGI Approve
38	Cobalt Chromium Abluminally coated Sirolimus Eluting Coronary Stent with microporous surface & low biodegradable polymer –CE Approved
39	Stainless Steel Abluminally coated Sirolimus Eluting Coronary Stent with microporous surface & low biodegradable polymer --CE Approved
40	Abluminal coated Everolimus Eluting Coronary stent : Design : Open cell , Strut Design : Open Cell with valley to valley S Connectots(V2VS) , Strut width: Wavflo Struts : 65,, L605 Stent Material: Cobalt Chromium , Diameter : 2mm-4.5 mm , Length available : 8mm - 52 mm
41	DES, SIROLIMUS, CE APPROVED STAINLESS STEEL PLATFORM, PBMA / PEVA double layer polymer coating for optimal drug release control,90 days drug releasing. Flexible stent design ,.Large opencells for side branch access
42	DES, sirolimus CE/ FDA/ DCGI approved cobalt chromium platform, biodegradable polymer,strut 56-60microns,:length:8,12,16,20,24,28,32,36,40,44,48, Size: 2,2.25,2.5,2.75,3,3.5,4,4.5 , with laser cut technology seamless tubing in a serpentine patern
43	DES, sirolimus with cumilative drug realese technology, CE/ FDA/ DCGI approved cobalt chromium platform, biodegradable polymer STRUT THICKNESS 56-60MICRONS length:8,12,16,20,24,28,32,36,40,44,48,sizes : 2,2.25,2.5,2.75,3,3.5,4,4.5 ,with laser cut technology seamless tubing in a serpentine patern
44	DES sirolimus,cobalt Chromium L 605 alloy,Biodergradable polymer,CE approved,Varying Strut width 85,70 &50 microns,size 2.25-4.5mm length 8-47mm
45	DES, sirolimus CE/ FDA/ DCGI approved cobalt chromium platform, biodegradable polymer, S-link strut 56-60microns,size:8,12,16,20,24,28,32,36,40,44,48, Size: 2,2.25,2.5,2.75,3,3.5,4,4.5 ,,with laser cut technology seamless tubing in a serpentine patern
46	DUAL DRUG SIROLIMUS COATED STENT Unique fusion coating both stent & balloon is drug coated. Edge coating : 0.5mm of proximal and distal ends of balloon is also coated Sizes : 2.25-4mm Length: 8-40mm
47	DES-Sirolimus eluting stentwith Biodegradable and Biocompatible Polymer Stent Diameter 2.25(mm) Stent Length 8 to 48 (mm)
48	L605 CoCr stent material, 70 microns strut thickness, Sirolimus eluting stent with biodegardable polymer a combination of PLLA and PGLA . 6 cell design for 2.50/3.00 mm stents and 8 cell design for 3.25/4.00 mm stents. Entry profile of 0.017”.
49	DES rapamycin eluting cobalt chromium stent with albumin in-groove design bioabsorbable polymer CE APPROVED
50	DES serolimus eluting cobalt chromium stent systemDiameter 5 mm
51	DES serolimus eluting cobalt chromium stent system Diameter 2 mm
52	DES,Sirolimus,cobalt chromium Short stent, Length 8mm
53	DES,Sirolimus,cobalt chromium Intermediate Length, upto 48 mm
54	DES,Sirolimus,cobalt chromium Long stent with Length more than 48 mm
55	DES, sirolimus 3.9nano gram/stent length, cobalt chromiumL605 stent with 80 micron strent thickness with open cell structur for side branch re crossing
56	DES, sirolimus 3.9nano gram/stent length, cobalt chromiumL605 stent with 80 micron strent thickness with open cell structur for side branch re crossing ,coating albuminal and gradient ,hydro philic distal shaft coating
57	DES, sirolimus L 605 cobalt chromium, biodegradabe polymer DCGI approved, 65 micron struts with open & closed disign SIZE 2.25 -4 mm ,length -10 ,13,15,18,20,24,28,32,36,40mm
58	DES,sirolimus cobalt chromium ,CE/DCGI, 70micron strut ,SIZE 2.5,2.75,3,3.25,3.5,4 length:8,13,18,,23,28,33,38, with plla-pgla based polymer
59	Everolimus Eluting Coronary Stent System ,CE APPROVED with outerradius of 0.1725mm. The Cell angle is between 42 degree to 57 degree with respect to different diameter. The cells are connected with a Radius of 0.2700mm. Drug Concentration: 1.2 microgram/mm2 of stent surface area.
60	DES CE approved Sirolimus 1.3µm/mm2 ,cobalt chromium 59µm hybrid ultra low thickness strut for all diameters,2µm of PLLA & PLGA polymers and drug coating, crossing profile 0.88mm. Diameter 2.25 to 4mm and lengths from 8 to 48mm in all diameters.
61	L605 CoCr, 8 crown design with an entry profile of 0.017\". sirolimus-eluting, features LMSC technique for coating and stepless technology for crimping Diameter: 2mm-4.5mm . Length: 8mm-48mm, DCGI approved
62	DES, DUAL DRUG ELUTING POLYMER FREE STENT
63	BMS, FDA APPROVED COBALT CHROMIUM PLATFORM
64	BMS, CE APPROVED COBALT CHROMIUM PLATFORM
65	BMS, ONLY DCGI APPROVED COBALT CHROMIUM PLATFORM
66	Bifurcation stent Self expanding, Nitinol
67	Bifurcation stent Balloon expandable, Platinum Chromium
68	Bifurcation stent Sirolimus Eluting, Cobalt chromium
69	Bifurcation stent Paclitaxel Eluting, Cobalt chromium
70	Coronary Self Apposing stent
71	Multilink cobalt chromium
72	Meshed stent
73	PTFE covered stent Stainless steel, Rapid exchange type, Sizes 2.8, 3.5, 4, 4.5, 4.8mm, usable length 143cm, crimped stent profile 0.068inch
74	Biodegradable vascular scaffold (BVS) Everolimus eluting
75	Biodegradable vascular scaffold (BVS) Sirolimus eluting
76	Peripheral stents
77	Renal stent Diameters-5-7mm, lengths-12-18mm
78	Covered peripheral stent- self expanding self expanding
79	Covered peripheral stent- balloon expandable balloon expandable
80	Covered stent Diameter:6mm-14mm/Length:30mm-70mm
81	Carotid self-expandable stent
82	FDA approved Carotid Stent( open cell) Nitinol mesh Straight & tapered
83	FDA Approved Carotid Stent (closed cell) Nitinol mesh Straight & tapered
84	Coarctation stent (Covered) Platinum/Iridium, 0.035 compatible, Diameter - 12–24mm, Lengths - 16, 22, 28, 34, 39, 45,50,55,60mm, Delivery system length – 110cm
85	Coarctation stent (Uncovered) Platinum/Iridium, 0.035 compatible, Diameter - 12–24mm, Lengths -, 16, 22, 28, 34, 39, 45,50,55,60 mm, Delivery system length – 110cm
86	Aortic stent graft
87	Carotid Balloon expandable stent
88	Peripheral self-expanding stents Nitinol/ ePTFE, guidewire - 0.035, Diameters-6, 7, 8, 9, 10, 12, 13.5mm, Lengths - 40, 60, 80, 100, 120mm, Delivery system lengths -80, 117cm
89	Balloon expandable peripheral stents (BMS)
90	FDA approved Balloon expandable Iliac stents (Co Cr) Cobalt chromium, Compatible guidewire - 0.014, Diameters- 6–10mm, Lengths - 12, 16, 19, 29, 39, 59cms, Delivery system lengths- 80, 135cm
91	Balloon expandable Biliary/Iliac stents (Stainless steel), 0.035 compatible Stainless steel, Compatible guidewire - 0.035, Diameters- 6-10mm, Lengths - 17, 25, 27, 37, 57mm, Delivery system lengths - 75, 135
92	Balloon expandable Iliac stents (Stainless steel) Stainless steel, Compatible guidewire - 0.035, Diameters- 11,12mm, Length - 30mm
93	Balloon Expandable renal stent (Co Cr) Cobalt chromium, Compatible guidewire - 0.035, Diameters- 4, 4.5, 5, 5.5, 6, 6.5, 7mm, Lengths - 12, 15, 18cms, Delivery system lengths- 80, 135cm
94	Balloon Expandable biliary/renal stent (Stainless steel) Stainless steel, Compatible guidewire - 0.014& 0.018, Diameters- 3-8mm, Lengths - 12, 16, 20, 24, 30cms, Delivery system lengths- 80, 135cm
95	FDA approved Interwoven nitinol stent for SFA/ Popliteal .lowest kink resistant ,Diameters-4.5-6.5mm, lengths – 20,30,40,60, 80, 100, 120, 150cm, Delivery system length – 120cm
96	Stent across hip/knee joint,Diameters- 6,7,8mm, Length - >120cm
97	FDA approved self expanding Nitinol stent system for Iliac arteries 0.035 compatible ,diameters-6,7,8,9,10mm, guidewire - 0.035,length 20,30,40,60,80,100, Delivery system length - 80,135cm
98	Nitinol stent system for Iliac arteries 0.035 Compatible Diameters- 12mm, guidewire - 0.035, Lengths - 20, 30, 40, 50, 60, 70,80, 100, 120cm, Delivery system length - 75, 120cm
99	Nitinol stent system for Iliac arteries 0.018 Compatible,Diameters- 6, 7, 8, 9, 10mm, guidewire - 0.018, Lengths - 20, 30, 40, 60, 80cm, Delivery system length - 125cm
100	Nitinol stent system for SFA Diameters- 5, 6, 7, 8, Lengths - 20, 40, 60, 80, 100, 120, 150, 200mm, Delivery system length - 75, 130
101	Elgiloy endoprosthesis system for Iliac A,Diameters- 6, 7, 8,9,10mm Lengths - 18, 20, 23, 24, 34, 35, 36, 38, 39, 46, 47, 49, 52, 55, 59, 61, 66, 67, 69mm, Delivery system length - 75, 135
102	Self expandable peripheral stent System,Diameter :3.8mm-4.5mm/Length:16mm-76mm
103	Self expandable peripheral stent System, Diameter :9mm-14mm/Length:8cm-120cm
104	FDA approved SFA Self Expanding Peripheral Stent ,length from 120- 150MM on 135 CM Catheter
105	SELF Expandable peripheral stent System,Straight type-diameter:6mm-10mm/length:135cm Tapered type-diameter:(8/6)mm-(10/7)mm/length:135cm
106	Balloon expandable peripheral stentDiameter:5mm-10mm/Length:12mm-57mm
107	Balloon expandable peripheral stent,Diameter:5mm-7mm/Length:14mm-21mm
108	Platinum - Iridium Stents for large Vessels - Covered and Uncovered - For use in large vessels
109	Coronary Balloons
110	Semicompliant balloon Balloon size: 1.2mm– 5 mm / Length: 6 mm -42 mm,(FDA APPROVED)
111	NonCompliant Balloon Balloon size: 1.2mm – 5 mm / Length: 6 mm -30mm,(FDA APPROVED)
112	1.25-2.5mm Semicompliant OTW Balloon for CART technique Balloon Length: 10-20 mm / Shaft Length: 135,148cm, entry profile - 0.43 mm (FDA APPROVED)
113	Rapid Exchange Noncompliant Balloon Balloon size: 1.2mm– 5 mm / Length: 6 mm -42 mm (FDA APPROVED)
114	Rapid Exchange Semicompliant Balloon Balloon size: 1.2mm – 5 mm / Length: 6 mm -42 mm (FDA APPROVED)
115	OTW Noncompliant Balloon Balloon size: 1.2mm – 5 mm / Length: 6 mm -30 mm (FDA APPROVED)
116	OTW Semicompliant Balloon Balloon size: 1.2mm – 5 mm / Length: 6 mm -30 mm (FDA APPROVED)
117	1.25-2.5mm Semicompliant CTO Balloon Balloon Length: 10-20 mm / Shaft Length: 148cm,(FDA APPROVED)
118	PMDA japan approved semi complianceCTO balloon. Normal Pressure @ 6atm, Rated Burst Pressure 14atm. Proxiamal shaft diameter 1.9Fr, M II Hydrophilic Coating , lesion entry profile 0.40mm, complete of balloon length 5mm-20mm and size 1mm
119	CE approved Rapid exchange Balloon for chronic total occlusion. 0.016mm lesion entry profile &tapered balloon shape for preventing buckling ,crossing profile of 0.019,with hydrophilic coating with proximal single marker,shaft length 140cm,
120	US FDA Approved Rapid exchange 1.2-2 mm Semicompliant CTO Balloon ,Balloon Length:6-30mm / Shaft Length: 145cm,
121	Rapid Exchange Compliant/ Noncompliant balloon, Balloon diameters-4-6mm, lengths-15,20mm, Catheter length-150cm, nominal pressure-6atm (FDA APPROVED)
122	Rapid Exchange Compliant/ Noncompliant balloon, Balloon diameters-1.5- 4mm, lengths- 9- 30mm, catheter length-142cm, nominal pressure-6-14atm(FDA APPROVED)
123	Monorail Compliant/ Noncompliant balloon,Balloon diameters-1.5- 4mm, lengths- 9- 30mm, catheter length-140/135cm, nominal pressure-6atm (FDA APPROVED)
124	Monorail compliant/Noncompliant balloon,Balloon diameters-2- 6mm, Lengths- 6- 30mm, catheter length- 143cm, nominal pressure-12atm(FDA APPROVED)
125	NC balloon twin layered for very high pressure dilatation,Balloon diameters-2- 6mm, Lengths- 6- 30mm, catheter length- 142cm(FDA APPROVED)
126	Semicompliant/ Noncompliant balloon with tip entry profile 0.019”,Balloon lengths-8-38mm, balloon diameters-2-4.5mm, 0.014” compatible(FDA APPROVED)
127	US-FDA approved for CTO indication, Semi & Non compliant Balloon dilatation catheter ,Balloon lengths-8-38mm, balloon diameters-2-4.5mm, 0.014” compatible (FDA APPROVED)
128	US-FDA approved for CTO indication, Semi & Non compliant Balloon dilatation catheter ,avrage burst pressur of 18 atmosphere and 143cm length (FDA APPROVED)
129	US-FDA approved for CTO indication, Semi & Non compliant Balloon dilatation catheter ,size:1.5,2,2.5mm, length:6,8,12,15(FDA APPROVED)
130	FDA Approved semi-compliance balloon with Flexible tungsten markers Balloon diameter-1.20mm,1.5mm,2mm,2.25mm,2.5mm,2.75mm,3mm,,3.25mm,3.5mm,3.75mm,4mm,4.5mm &5mm.Balloon length-6mm,8mm,12mm,15mm,20mm,25mm,&30mm.
131	FDA Approved Non-compliance balloon,with Flexible tungsten markers Balloon diameter-1.5mm,2mm,,2.25mm,2.5mm,2.75mm,3mm,3.25mm,3.5mm,3.75mm,4mm,4.5mm &5mmBalloon length-6mm,8mm,12mm,15mm,20mm,25mm.
132	Rapid Exchange Semicompliant Nylon Semi-compliant balloon with 0.017 \" tip entry profile, 135 mm effective length \| Balloon size: 1.5mm – 4 mm / Length: 9 mm -30 mm (FDA APPROVED)
133	Rapid Exchange Pebax Noncompliant balloon Balloon with patented Hydrophilic coating on distal shaft with 0.017\" tip entry profile ,Balloon diameters 2.25 - 4.0 mm , lengths 6.0 - 30 mm, effective Catheter length-142cm, nominal pressure-6atm (FDA APPROVED)
134	PTCA balloon less than 0.016\" tip profile low profile rapid exchange semi-compliant balloon with with RBP of at least 14 ATM with 2.3 F shaft. Dia 1.00mm, 1.25mm, 1.50mm, 1.75mm, 2.00mm, 2.25mm, 2.50mm, 2.75mm, 3.0mm, 3.25mm, 3.50mm & 4.00 mm and lengths from 5mm, 10mm, 15mm, 20mm & 30mm. (FDA APPROVED)
135	Non-Compliant rapid exchange PTCA Balloon, with enhanced push ability, trackability and kink resistance, RBP 22 ATM, Average Burst Pressure of 30 atm; tip entry profile ≤ 0.016”. Diameters 2.00mm, 2.25mm, 2.5mm, 2.75mm, 3.0mm, 3.25mm, 3.5mm, 3.75mm, 4.0mm, 4.5mm & 5.0mm-5.0 mm, lengths from 8mm, 10mm, 12mm, 15mm & 18mm .(FDA APPROVED)
136	semi compliant XD shaft ,Hydro X coating Z tip from 1mm to 4mm size :1,1.25,1.5,2,2.25,2.5,2.75,3,3.25,3.5,4, length:8,10,12,15,20 (FDA APPROVED)
137	Non Compliant PTCA Balloon catheter with crossing profile of 0.0360.NP is 12,RBP 20 atm Hydro X(distal tip to guide wire exit port) invio coating (guide wire lumen) size:1.75,2,2.25,2.5,2.75,3,3.25,3.5,3.75,4,4.5,5 ,length: 8,10,12,15,18 (FDA APPROVED)
138	ultra low profile CTO balloon with 0.016 tip entry profile,flexible tip. Tri wrapped balloon provides enhancing crossability.thin proximal shaft of 1.9 f nominal of 6 atm and RBP Of 14 atm. 1.25 to 3mm diameter ballon(FDA Approved)
139	FDA approved ,Non compiant ptca balloon catheter with hydrophilic coating shaft length is 145cm,shaft diameter :2f (0.67) proximal ,distal:2.5f (0.83),distal for 2.25mm to 3mm2.6 fr (0.87mm) distal for 3.25mm to 5 mm with double ballon marker ,RBP;20 atm for 2.25mm to 4mm,18atm for 4.5 to 5mm with entry profile 0.43mm
140	(FDA Approved)non compliant hydrophilic coated balloon with flexible thin markers,tri layer balloons with soft inner and outer elastomer layers that for resistance from high pressures and stronger polymide layer in the middle for aditional and safer high pressur ressistance., shaft diameter of 1.9f proximal and 2.5f in the mid segment 145 cm length with nominal pressure of 12 atm and RBP 22 atm ,lesion entry profile 0.017
141	Sirolimus eluting balloon nanolute propritory nano carrier drug eluting tecnology drug:1.27μ/mm2of sirolimusDrun release within 60 secs.14 to 28 days drug bio availability in target tissue ,size: 2mm -4mm length:40mm to 100mm (FDA APPROVED)
142	FDA APPROVED Specialised proximal optimisation balloon dilatation catheter with ultra short balloon shoulder of 0.6mm and an RBP of 22 atm with sizes ranging from a length of 6-15 mm and diameters ranging from 2.25-5 mm. Hydrophilic external surface coating from tip to adjacent guidewire port and silicone coating inside guidewire lumen.
143	(CE APPROVED) Non Compliant PTCA Balloon catheter with Selective hydrophilic coating at distal shaft including balloon tip, Length (mm): 6,8,10,12,15,20,25,30 Diameter(mm): 2,2.25,2.50,2.75,3.00,3.25,3.5,3.75,4.00,4.5 & 5.0, Tip entry profile ≤ 0.016’’ (0.41 mm) Ultra low tip entry profile Shaft Diameter: Proximal ≤ 1.95 F & Distal ≤ 2.67 F
144	FDA APPROVED 0.75 mm CTO balloon with a tip entry profile of 0.015” and ultra low crossing profile of 0.020” with a proprietary distal welding technology, 2.2F distal shaft, Rated Burst Pressure of 20 ATM and Average Burst Pressure of ≥ 28 ATM. Diameters from 0.75mm, 1.0mm, 1.25mm, 1.50mm, 1.75mm & 2.0mm and lengths from 5mm, 8mm, 10mm, 15mm, 20mm, 25mm & 30mm.
145	CE approved SEMI-COMPLAINT LOW ENTRY PROFILE BALLOON Entry Profile 0.0157 Inch , Dia- 1.00,1.50,2.00,2.25,2.50,2.75,3.00 Length - 06,10,12,15,20 - Shaft 2.3Fr - Effective length 1460mm
146	CE approved NON-COMPLAINT BALLOONShaft Outer Diameter (Proximal) : 2.1Fr/0.70mm , Dia - 1.50,1.75,2.00,2.25,2.50,2.75,3.00,3.25,3.50,4.00,4.25,4.50 Length - 08,10,13,15,20 - Effective Length 1460mm
147	CE approved Non complaint balloon catheter Balloon Size : 2.25mm - 5mm/Length : 6mm-20mm rapid exchange proximal shaft 2.3 F and distal shaft - 2.7 F,TIP entry profile 0.017 with Nominal inflation pressure 12 atm & RBP-20 atm,and having two plantium iridum markers.
148	CE approved semi complaint balloon catheter, inner shaft with patented 2 layer design using specialized material. Balloon Size : 1.00 mm - 4.00mm/Length : 6mm-20mm rapid exchange,proximal shaft-2.2 F and distal shaft-2.1 F,Crossing profile 0.021\" - 0.027\" with Nominal inflation pressure-6 atm & RBP-16 atm.
149	CTO/SEMI-COMPLAINT LOW ENTRY PROFILE BALLOON(TR2 COATING) , Entry Profile 0.0157 Inch , Dia- 1.00-4.00Length - 06-30 - Shaft 2.3Fr - Effective length 1460mm, CE Approved
150	Rapid Exchange Compliant/ Noncompliant balloon,Balloon diameters-4-6mm, lengths-15,20mm, Catheter length-150cm, nominal pressure-6atm (CE APPROVED)
151	Rapid Exchange Compliant/ Noncompliant balloon,Balloon diameters-1.5- 4mm, lengths- 9- 30mm, catheter length-142cm, nominal pressure-6-14atm(CE APPROVED)
152	Semicompliant/ Noncompliant balloon with tip entry profile 0.019”,Balloon lengths-8-38mm, balloon diameters-2-4.5mm, 0.014” compatible(CE APPROVED)
153	Non Compliant PTCA Balloon catheter with hydrophilic coating ,0.16\"\" Lesion Entry profile and 24 Bar RBP(CE APPROVED)
154	Semi Complaint PTCA Balloon ,Catheter with hydrophilic Coating on balloon and distal shaft including sleeve and transition tube with comparable lesion entry profile(CE APPROVED)
155	Twin layered super high pressure balloon dilated catheter for highly calcified lesion,35 bar RBP,45 bar ABP-CE marked(CE APPROVED)
156	Semicompliant balloon,Balloon size: 1.5mm– 2.5 mm / Length: 8 mm -20 mm rapid exchange proimal shaft 0.72mm and distal shaft -0.90mm, TIP profile -0.018 with Nomial inflation pressure 12 atm &RBP -22 ATM , and having two plantinum iridum markers (CE APPROVED)
157	PTCA-rapid exchange semi compliant pre-dilation catherer,entry profile0.017,crossing profile 0.026,shaft length 2.2Fr skived over extruded hypotube distal 2.4 fr, size:1.5,2,lengt: 10,15,20,30(CE APPROVED)
158	semi compliant pre-dilation catherer, balloon material nylon 12,entry profile0.017,crossing profile 0.026,shaft length 2.2Fr skived over extruded hypotube distal 2.4 fr, size:2.52.75,3,3.25,3.5,3.75,4lengt: 10,15,20,3032(CE APPROVED)
159	PTCA-rapid exchange non compliant post-dilation catherer,entry profile0.017,crossing profile 0.032, proximal shaft 2.2fr, over spv hypotube distal 2.6 fr, size:1.5,2,2.5,2.75,3,3.25,3.5,3.75,4mmlengt: 10,15,20,30mm(CE APPROVED)
160	Peripheral Drug Eluting Balloons for PTA
161	Peripheral Drug Eluting Balloon-0.035 guide wire compatible-,Balloon size: 4 mm --7mm / Length: 40mm ---150 mm
162	Peripheral Drug Eluting Balloon -0.018 guide wire compatible--Balloon size: 4 mm --7mm / Length: 40mm ---120 mm
163	Sirolimus eluting pheripheral balloon nanolute nano carrier drug eluting tecnology.low crossing profile ,size:5mm-9mm length:40mm-100mm
164	Peripheral Balloons for PTA
165	Peripheral OTW Balloons -0.035 guide wire compatible,Balloon size: 3mm– 12 mm / Length: 20mm -300 mm
166	Peri. OTW balloon--0.035 guide wire compatible-,Balloon size: 4 mm --12mm / Length:20mm –20mm-100mm
167	Peri. OTW balloon- 0.018 guide wire compatible- ,Balloon size: 2 mm --7mm / Length: 20mm ---150 mm
168	Peri. OTW balloon-0.018 guide wire compatible- ,Balloon size: 4mm --7mm / Length: 20mm ---300 mm
169	Peripheral OTW Balloon 0.014 guidewire compatible,Balloon size: 1.5mm--6mm / Length: 20mm ---210 mm
170	PTA Rapid exchange balloon catheter,Balloon size: 2mm--4mm / Length: 20mm ---210mm
171	FDA Approved Low Profile High Presseure Balloon - Below the Knee, diameter :4mm to14mm length 20 ,40,60,80 shaft 90 to 150 mm
172	FDA Approved Low Profiel High Pressure Balloon - SFA, 6F compatible upto 7mm Dia
173	FDA Approved High pressure Balloon - Carotid, Renal, with 6F compatible upto 7mm Dia
174	Peripheral PTA - special devices
175	Peripheral CTO device,Flexible/standard-0.014”guidewire compatibility
176	Peripheral CTO device,Balloon size 3.75mmx1.5mmx20mm/2.75mmx1mmx20mm
177	,CTO guidewire,Flexible/Standard/Stiff-0.014”diameter,300cm length
178	Peripheral balloon,balloon diameter=1.5mm-26mm length = 20mm- 300mm
179	Peripheral guide wire system,Floppy type/Intermediate type/Standard type
180	Peripheral wire hydrophilic,Lengths- 145, 180, 260cm, Diameter - 0.035–0.038”, angled or straight
181	Directional Atherectomy system for peripheral,Tip length:6.6cm-9.6cm
182	Peripheral Plaque Excision System,Crossing profile:2.2cm-2.7cm
183	Peripheral support catheter,
184	Specialty Balloons
185	Coronary Sinus balloon occlusion catheter.balloon diameter – 10mm, 15mm,Balloon lengths-10cm,20cm, catheter lengths – 80mm, 100mm, 200mm, Guidewire compatibility- 0.025”, 0.035”
186	Drug eluting balloon(sirolimus).Balloon size: 1.5mm – 6 mm / Length: 10 mm -250mm
187	Drug eluting balloon.Balloon(paclitaxel) size: 1.5mm – 6 mm / Length: 10 mm -250mm
188	CE approved Drug Coated Balloon Catheter,BTHC excipient with secure technology, Paclitaxel Releasing Balloon Catheter with a biocompatible excipient. Diameter:2.0,2.5,3.0,3.5,4.0 Length: 10,15,20,25,30
189	Cutting balloon.Balloon size: 2mm – 4 mm / Length: 6 mm, 10mm, 15mm
190	Coronary cutting balloon unique knob design4 lines of knobsRBP of 22 atmoptimal plaque crushing for superior post dilationsize: 2.50, 3.00, 3.50, 4.00 x 8,12,16
191	CE APPROVED PTCA NC Scoring Balloon Catheter with songle wire helical shape tapered tip available in sizes from 2.0mm, 2.5mm, 3.0mm, 3.5mm Diameters and in lengths from 6mm, 10mm & 15mm.
192	FDA APPROVED PTCA Scoring Balloon Catheter with tapered tip and three nitinol, helical shaped, electropolished scoring elements with rectangular edges, mounted on a balloon with a larger working range of 2 ATM - 20 ATM and available in sizes from 2.0mm, 2.5mm, 3.0mm, 3.5mm Diameters and in lengths from 6mm, 10mm & 15mm.
193	USFDA Scoring balloon with TiFo folding and x-flex tip.Balloon size: 2mm – 4 mm / Length: 6 mm, 10mm, 15mm
194	Scoring balloon.Balloon with Three Helical nitinol size: 2mm – 4 mm / Length: 6 mm, 10mm, 15mm
195	Diagnostic Catheter
196	DCGI approved TIG Catheter.5F-6F / 100 cm,
197	CE / FDA approved TIG Catheter.5F-6F / 100 cm,
198	PDMA approved Tiger curve diagnostic catheter for radial angiogram-size:5F-6F / 100 cm, soft catheter with 1:1 torque control Internationally accepted Terumo quality and equal performance needed for patient safety & to avoid spasm of radial artery,5F-6F / 100 cm,
199	Pigtail,5F & 6F / Lengths 100, 110 & 125cm, Side holes 6 & 12
200	Angled pigtail catheter,5F & 6F, Curves145& 155, Lengths 100,110 &125cm, Side holes 6 & 12
201	GLIDECATH HYDROPHILIC CATHETER, 5F-6F / 100 cm,125CM
202	Multipurpose(MPA1,A2,B1,B2) diagnostic catheter ,5F-6F / 100 - 125 cm
203	Cerebral Diagnostic Catheter,5F-6F / 100 cm,
204	Amplatz Catheter Left/Right-AR/AL1,2 diagnostic catheter,5F-6F / 100 cm-125 cm
205	Judkins right / left diagnostic catheter (JR/JL),4F-7F / 100 cm,-125 cm
206	Mother and child catheter Size – 6F/extension length 15cm
207	NTR( no torque right) catheter,useful for engaging anteriorly angulated bypass graft(including LIMA from the left radial approch& RIMA from the femoral approach)
208	Unique hydrodynamic surface for Low resistance- 5f &6f -large inner lumen - Superior kink resistance- 1-to1 torque Catheter with double wire stainless steel braiding in 6f Atraumatic soft tip
209	Pediatric Diagnostic catheters : All lengths, all curves, 4F and 5F compatible
210	Coronary Guiding Catheters
211	FDA Approved Guiding Catheter for PTCA,6F-8F / 47-110 CM, With steel braided, All sizes
212	FDA approved Guiding Catheter for PTCA,6F-8F / 47-110 CM, with encapsulated flat braided wire, Vest tech nylon outer jacket, all sizes
213	PTCA Guiding catheter, 100 cm long:It should be large lumen (minimum of 0.070\" inner lumen in 6F and ≥0.080\" in 7F), stainless steel braided, inner layer coated with PTFE. It should have traumatic soft tip with radio opaque marker band at the tip.a)Judkins left without side holes (Curves 3, 3.5, 4,5 cm), Size 5F/6F/7F/8F.b)Judkins right without side holes (Curves 3, 3.5,4, 5 cm), Size 5F/6F/7F/8F. C)Judkins Right with side holes (Curves 3, 3.5, 4, 5cm), Size 5F/6F/7F/8F.d) IMA guiding catheter, Size 5F/6F/F.e) Multipurpose (AI, All), Size 5F/6F/7F/8F.f) Multipurpose (BI, BII), 5F/6F/7F/8F.g) Amplatz Left (Curves ALO.75, AL1, AL1.5, AL2,AL3). 5F/6F/7F/8F.h) Amplatz Right (Curves AR1, AR2), 5F/6F/7F/8F.i) Voda Left, 5F/6F/7F/8F.j) Left coronary bypass guide catheter, 6F/7F.k) Right coronary bypass guide catheter, 6F/7F.I) Extra back-up (EBU) left, 5F/6F/7F/8F.m) Extra back-up (EBU) right, 5F/6F/7F/8F.n) 3D right guiding catheter, 6F/7F.0) Hockey Stick guiding catheter, 6F/7F.p) Shepherd Crook right type guiding (Curves 3.5,4,5), 6F/7F.q) Head Hunter guiding catheter, 6F/7F.
214	CE APPROVED GUIDING CATHETER ALL SIZES
215	PMDA japan approved GUIDING CATHETER ALL SIZES
216	Judkins Right Guiding catheter ( Paediatric),4F, 5F
217	3 Dimensional right guiding Catheter (3DRC) for PTCA,6-8F /47 -110 cm
218	Extra Backup left Guiding Catheter (XBU) for PTCA,6f /47 -110 cm
219	Contralateral left support (CLS) Guiding Catheter for PTCA,6-fF /47 -110 cm
220	Femoral right guiding catheter for PTCA (FR),5-8F /47 -110 cm
221	Femoral left guiding catheter for PTCA (FL),5-8F /47 -110 cm
222	FDA APPROVED MOTHER AND CHILD CATHETER
223	PMDA japan approved MOTHER AND CHILD CATHETER
224	Guiding catheter with Hyper Shaft,Reinforced 2nd curve,3rd curve,HENKA-Braid,All round processed tip,PTFE liner. 100cm length; 6Fr (ID- 1.80 mm, OD – 2.09 mm), 7 Fr (ID – 2.05 mm, OD- 2.40 mm), 8 Fr (ID- 2.28 mm, OD- 2.70 mm)
225	Large lumen Guiding catheter, uniqueHydrophilic coating (68 in middle,7cm distal and 25 cm proximal is uncoated.) balancing flexibility and support. All curves 5F-8F are available.
226	Aspiration Catheters
227	135 cm Thrombus Aspiration Catheter,Outer diameter: 3.9-5.4F
228	140 cm Thrombus Aspiration Catheter,Outer diameter: 3.9F
229	145 cm Thrombus Aspiration Catheter,Outer diameter: 3.5 F
230	FDA Approved Thrombus Aspiration Catheter
231	FDA APPROVED Aspiration Catheter of 6F and 7F Guiding Catheter compatibility; 140 cm working length catheter with 140 cm stylet length; 90 cm and 100 cm depth markers; Provide 60ml aspiration syringe for high suction efficiency; large size collecting filter.
232	CE Approved Thrombus Aspiration Catheter
233	CE Approved Thrombus Aspiration Catheter with stylet
234	FDA Approved, kink resistant Pedax Distal end, with out stilet, crossing profile 4.5F
235	PMDA Approved Thrombus Aspiration Catheter
236	Thrombus Aspiration Catheter with braided technology,Catheter length 145cm, maximum tip diameter - 1.73, 1.98, Guide catheter - 6, 7F
237	Low profile thrombus aspiration catheter,Maximum tip diameter - 1.40, length 145 cm
238	Thrombus aspiration catheter with tapered silva tip with sloped extraction lumen,0.014”, length-140cm, rapid exchange length-20cm
239	Hemostatic agents, devices and vascular closure devices
240	Thrombin and collagen based flowable hemostat for pacemaker pocket hemostasis.Thrombin vial , Collagen syringe with attached mixing luer, Diluent vial, Mixing accessories, Applicator tips
241	Monofilament suture type vascular closure device,puncture size – 8F-21F
242	Braided suture type vascular closure device,puncture size – 5F- 8F
243	Mechanical seal type vascular closure device,Puncture size- 5/6, 7/8
244	Balloon type radial artery compression device,Transparent dual compression balloons, with Velcro straps, sizes 24-29cm
245	Dial type radial artery compression device,
246	Brachial/radial artery compression device with plastic strap,Adjustable plastic strap, Sizes 21-37cm
247	Pressure-assisted radial artery compression device, Inflatable bulb type
248	Pressure-assisted femoral artery compression device,Inflatable bulb type, sizes 12,24cm
249	Embolization Particles /Coils/ IVC Filters
250	Embolization particles- for intracranial embolization,Sizes: 90–180, 180–300, 300–500, 500–710, 710–1,000, 1,000–1,400, 1,400–2,000, 2,000–2,800.
251	PVA particles- for peripheral AV malformations,Sizes- 45–150, 150–250, 250–355, 355–500, 500–710, 710–1,000, 1,000–1,180, color coded vials, Irregularly shaped flakes
252	Cerebral coils,All available diameters, All available lengths
253	IVC filter,30 cm filter diameter,7 F size
254	Embolization coils – Platinum type,Material-Platinum, All available diameters, All available lengths
255	Embolization coils- Inconel type,Material –Inconel, all available diameters, all available lengths
256	Cyanoacrylate glue for embolisation,
257	poppyseed oil,injection as a radio-opaque contrast agent that is used to outline structures in radiological investigations
258	Peripheral Guiding Catheters
259	Guiding Catheter for renal,size – 7-9/ length – 55,96
260	Peripheral Guiding Catheter,size – 6-8/ length – 55,90
261	Peripheral Guiding Catheter,6F-10F , 50 cm length
262	Paediatric Diagnostic Catheters,Catheter make with Sixteen stainless steel wire braids to impart 1:1 torque control to catheter tip and maximize pushability, made of Nylon material which resists softening during prolonged catheter manipulation. Short, flexible atraumatic catheter tip to maintain stability during injection. Catheter tip shapes - JL1 -4; JR 1-4; pigtail, pulmonary curve catheters, Multipurpose catheters (A, B, NIH, Vert), Cobra (C1-C3), AR(1,2), AL(1,2), Head Hunter (H1-H3), SIM(1-3), 4 Fr to 7Fr. . Internationally accepted Cook quality and equal performance needed for patient safety
263	Balloon floatation right heart catheter : Balloon tipped catheters for right heart study, for pressure measurement - single / double lumen. . Internationally accepted quality and equal performance needed for patient safety
264	Balloon floatation right heart catheter: Balloon tipped catheters for right heart angiography - with multiple holes. . Internationally accepted quality and equal performance needed for patient safety
265	Carotid Guiding Catheter (guide catheter for neuro),Size: 7-9 /55,96
266	Sheathless guiding catheter for CAROTID ,6.5 to 7.5 F, 89 cm length
267	Support catheter for flush total occlusions and angulated lesions - straight,7Fsize, 7-110 cm length
268	Special Catheters
269	Guide Extension Catheter,120 cm Proximal hypotube shaft, 0.057\"\" (1.45 mm) Innerdiameter, Hydrophilic coating, Atraumatic tip, Extended length 25cm, 2 radio-opaque markers
270	GUDE EXTENSION CATHETER with a Tapered Shaft(5.3Fr to 4.5Fr) with a Non Matalic tip
271	FDA APPROVED Guide Extension Catheter available in variable diameters of 4.7F and 5.0F for accessing distal anatomy and delivering high profile devices; Guide Extension Catheter with a tapered distal shaft for accessing distal and challenging coronary anatomy; Guide Extension Catheter with a Resinous atraumatic tip; Guide Extension Catheter with a large entry port design for easy device insertion
272	Guidewire Reentry Catheter with guidewire,Catheter: Self orienting flat balloon length 10mm, 180o opposed proximal and distal ports with markers, Working length-135cm
273	Guidewire Reentry Catheter with guidewire,Catheter: With a ratcheting torque device, Working length-135cm
274	Double lumen OTW catheter for bifurcation lesions,0.014 guide wire compatible, length – 140cm
275	Reinforced 18” endhole-infusion, Diameter:2.8mm-2.3mm/Length:135cm-cm-158cm
276	Reinforced 27”microcatheter,Diameter:2.8mm-2.8mm/Length:135cm-cm-150cm
277	Wire control catheter - CS catheter,Length-70cm, inner diameter-0.018”
278	Wire control catheter - OTW/ RX,Length-140, 145cm, inner diameter-0.018”
279	micro porous PTFE balloon catheter,0.014 guide wire compatible
280	Focal-force PTA balloon catheter, 0.035 compatible,Balloon diameters-5mm-12mm, balloon length- 4cm, catheter lengths- 50,80,135cm
281	Flow-Directed Balloon catheter,Size-5.3F, catheter length -80cm, diameter – 10mm, volume-1ml
282	Dual balloon ostial angioplasty catheter,Balloon diameter- Distal: 3, 3.5, 4, 4.5mm; proximal: 11mm maximum, catheter length- 135cm, Balloon lengths- Distal: 8; proximal: 10cm, Inflation volume 0.4-ml (proximal
283	Dual balloon ostial angioplasty catheter,Balloon diameter- Distal: 3, 3.5, 4, 4.5mm; proximal: 11mm maximum, catheter length- 135cm, Balloon lengths- Distal: 8; proximal: 10cm, Inflation volume 0.4-ml (proximal)
284	Dual balloon ostial angioplasty catheter ,-OTW,6.6F, balloon diameters- Distal: 6, 7mm proximal: 14mm maximum, balloon lengths- Distal: 12, 17cm; proximal: 14, 15cm
285	Cryoplasty catheter system for peripheral bperalloon angioplasty,8F, balloon diameters-2, 2.5, 3, 3.5, 4, 5, 6, 7, 8mm, balloon lengths- 40, 100, 150cm
286	Targeted Drug Delivery system,7F, Adjustable dual occlusion balloons with diameters- 2.5–10mm, balloon length-1cm
287	Conformable Occlusion Balloon system for asymmetric vessels,Balloon lengths-7mm-15mm, Balloon diameters-3, 4, 7mm
288	Occlusion Balloon system for distal vessels,Balloon lengths-10mm-30mm, Balloon diameters-3,4,5mm
289	Microcatheters
290	2.8 F proximal size microcatheter for retrograde approach,Stainless coil shaft with 10 braided wire, Distal size: 1.26 F / 150 cm Length
291	2.1F proximal size specialty micro catheter,long taper with platinum tip and stainless steel rope,Distal size: 1.8F / 135 cm Length
292	2.6 FR proximal size specially micro catheter,ong taper with platinum tip and stainless steel rope, Distal size: 2.1 FR/ 135 cm Length.
293	2.9 FR proximal size ordinary micro catheter,Distal size: 2.2 – 2.4 FR / 150 cm Length.
294	130 & 150 cm stainless steel braide , hydrophilic coating , tapered inner shaft with floppy distal 13 cm segment, proximal size 2.6 F , distal size 1.8 F , radio opaque tip
295	micro catheter:tip 1.4 FR hydrophilic coated shaft length 135cm,shaft outer diameter :distal-1.9fr,proximal:2.6fr.shaft inner diameter -distal:0.017FR,proximal:0.022FRwith unique braiding for flexibility and kink resistance
296	2.7 F proximal size micro cathetre with 021 hydrophilic coating wire, tungsten coil pitch, distal 2.9 F,length 130 cm
297	entry profile 1.6 FR,tapered and robust tip material ,braided shaft hight pushability with hard proximal shaft .shaft length 135cm, with hydrophilic coating 43cm
298	2.8FR and 2.5 FR micro cathetre for used in small vessel or super selective anatomy .for pheripheral and coronary use ,inner diameter 0.21&0.25 ,length 100,135,150cm
299	Microcatheter for delivery of micro coils,Vortec fiber braided microcatheter, length 130 and 150 cm, proximal size 3FR, Distal size 2.5 FR, end hole diameter 0.021 inch, with radio opal tip and hydrophilic coating
300	Microcatheter for delivery of micro coils, capable of injection , Vortec fiber and platinum braided microcatheter, length 105 to 150 cm, proximal size 3FR, Distal size 2.8 FR, end hole diameter 0.027 inch, with radio opal tip and hydrophilic coating
301	PTCA wires
302	185 cm long Floppy work horse wire for PTCA-Straight / J tip -Core material stainless stee
303	185 cm long Intermediate work horse wire for PTCA-Straight / J tip -Core material stainless steel
304	185 cm long Extrasupport work horse wire for PTCA-Straight / J tip -Core material stainless steel
305	182 cm ,300 cm , spring coil , core to tip design, 0.014 with 0.8 tip load , PTCA work horse wire-Straight / J tip
306	190 cm ,0.014 , hydrophilic distal 30 cm & PTFE proximal shaftlong PTCA work horse wire-Straight / J tip -Core material stainless steel
307	180 cm long, 0.8 tip load , 30 mm silicone coating from tip, Straight / J tip -Core material stainless steel
308	190 cm long, 0.8 Tip load , 12 cm spring coil length , stainless steel high tension core -Straight / J tip
309	180 cm long, 0.5 Tip load PTCA work horse wire -Straight / J tip
310	180 cm long, core to tip design , 0.014, 0.7 tip load, hydrophobic , extra support wire,Straight / J tip
311	US FDA approved 190 , 300 cm length, nitinol core, PTCA work horse wirewith polymer sleeve with soft tip load of <1gm & shaping ribbon design .7g tip load Straight / J tip
312	US FDA approved 190 , 300 cm length, nitinol core, PTCA work horse wirewith polymer sleeve ,with soft tip load of <1gm & shaping ribbon design .7g tip load Straight / J tip
313	US FDA approved190 , 300 cm length, hydrophobic coating type nitinol core, PTCA work horse wire ,with polymer sleeve ,with soft tip load of <1gm & shaping ribbon design .7g tip load Straight / J tip
314	US FDA Approved 190 cm long, tip load-0.8Floppy work horse wire for PTCA ,Straight / J tip, Core material stainless steel , polymer tip , core to tip design , 0.014 with 0.8 tip load , with hydrophilic tip and light support
315	US FDA approved 190 cm long, tip load- 1 intermediate work horse wire for PTCA ,Straight / J tip, Core material stainless steel , polymer tip , core to tip design , 0.014 with 0.8 tip load , with hydrophilic tip and light support
316	US FDA approved 190 cm long, tip load- 1.2 Extra support work horse wire for PTCA,Straight / J tip, Core material stainless Core material stainless steel , polymer tip , core to tip design , 0.014 , with hydrophilic tip and light support,
317	195cm-length, hydrophilic coating-33mm, 0.014”diameter, (Floppy, intermediate, standard ) work horse wire for PTCA,Straight tip/ J tip
318	hydrophilic coating-33mm, 300cm-length, 0.014”diameter, (Floppy, intermediate, standard ) work horse wire for PTCA,Straight tip/ J tip
319	190 cm long, tapered tip ,0.014 tapering to 0.009, 0.8 tip load CTO Wire for PTCA,Tapered tip
320	190 cm long, 0.014 tpering to 0.010 ,hydrophylic, 1 gm tip load CTO Wire for PTCA,Tapered tip
321	300 cm length,0.014 diameter, straight tip shape, 0.8 tip load double length CTO wire for PTCA,Straight tip
322	300 cm long, Tapered tip , 0.6 tip load CTO wire for PTCA,Tapered tip
323	180 cm length,0.014 diameter, straight tip shape, 0.8 tip load double length CTO wire for PTCA,Straight tip
324	180 cm length,( Straight tip shape ,3-4.5 tip load CTO wire for PTCA, silicone coating over spring coil , Straight tip
325	180 cm length,( Straight tip shape,)6-12 tip load CTO wire for PTCA,Straight tip
326	180cm length, 9- 12 tip load CTO wire for PTCA( tip shape straight,),tapered & straight tip
327	180cm length, 20 tip load CTO wire for PTCA( tip shape straight ),tapered & straight tip
328	180cm length, 1 tip load CTO wire for PTCA( tip shape straight) ,Hybrid wire that fuses Nitinol & stainless steel, , 180 cm & 300 hydrophilic coating over the distal 24.8cm of the distal tip , silicone tip on the distal 2mm , nitinol floppy tip, Straight tip
329	180cm length, 3.6 tip load CTO wire for PTCA( tip shape straight) , Hybrid wire that fuses Nitinol & stainless steel, 180 cm & 300 hydrophilic coating over the distal 24.8cm of the distal tip , silicone tip on the distal 2mm , nitinol floppy tip,Straight tip
330	180cm length, 3.6 tip load CTO wire for PTCA( tip shape straight) , Hybrid wire that fuses Nitinol & stainless steel, 180 cm & 300 hydrophilic coating over the distal 24.8cm of the distal tip , silicone tip on the distal 2mm , nitinol floppy tip,Straight tip ,1:1 TORQUE
331	FDA approved190cm length, 1.7, tip load CTO wire for PTCA( tip shape straight) ,stainless steel core , core to tip design , 0.014 wire with 0.010 tip & hydrophilic coating, Straight tip
332	FDA approved 190cm length, 4.7 Tip load CTO wire for PTCA, steel core , spring coli tip , core to tip design , 0.010 tip ,hydrophilic tip coating, tip shape straight ,Straight tip
333	US FDA approved 190cm , 300 length, 1.5 tip steel core , polymer tip , core to tip design , 0.014 wire with tip load of 1.5 gm , hydrophilic coating , CTO wire for PTCA,J tip
334	US FDA approved190cm , 300 length, 2.7 tip ,steel core , polymer tip , core to tip design , 0.014 wire with tip load of 2.7 gm , hydrophilic coating load CTO wire for PTCA,J tip
335	190cm ,300 length, 4.1 tip load steel core , polymer tip , core to tip design , 0.014 wire with tip load of 4.1 gm , hydrophilic coating load CTO wire for PTCA,J tip
336	330cm length, 3 tip load CTO wire for PTCA, tip shape straight , for guidewire externalisation for retrograde procedures
337	US FDA APPROVED 190cm length, 4.8- 9.7 tip load CTO wire for PTCA,spring coil tip , core to tip design , 0.012 diameter ,Straight tip
338	US FDA approved 190cm length, 12.5- 13.3 tip load steel core ,coil tip , core to tip design , 0.010 to 0.009 tapered tip ,CTO wire for PTCA( tip shape straight , hydrophilic coating Straight tip
339	190cm ,300 cm length, 0.014 tapering to 0.010, 1.7 tip load CTO wire for PTCA ,Tapered tip, 1 mm preshaped tip, microcone tip
340	190cm ,300 cm length, 0.014 tapering to 0.011, 3.5 tip load CTO wire for PTCA tip shape tapered , Tapered tip1 mm preshaped tip, microcone tip
341	190cm ,300 cm length, 0.014 tapering to 0.012, 4.5 tip load CTO wire for PTCA( tip shape tapered , Tapered tip,1 mm preshaped tip, microcone tip
342	0.018 diameter peripheral floppy wire ( tip shape straight / length 80,180,300cm, Straight tip
343	0.025diameter peripheral floppy wire ( tip shape straight / length 80,260,300cm,Straight tip
344	0.035 diameter peripheral wire ( tip shape straight / length 180,260cm, Straight tip
345	0.018 diameter peripheral intermediate wire ( tip shape straight / length 80,180,300cm, Straight tip
346	0.018 diameter peripheral standard wire ( tip shape straight / length 80,180,300cm, Straight tip
347	0.025 diameter, peripheral intermediate wire ( tip shape straight / length 260,180,300cm, Straight tip
348	0.025diameter, peripheral standard wire ( tip shape straight / length 260,180,300cm) ,Straight tip
349	195cm-length, hydrophilic coating-35mm, 0.014”diameter, (tipload-12g ),Straight tip/ J tip
350	hydrophilic coating-35mm, 300cm-length, 0.014”diameter, (tip load 12g),Straight tip/ J tip
351	195cm-length, hydrophilic coating-33mm, 0.014”diameter, Stainless Steel coil length-26mm, floppy & standard, J tip
352	hydrophilic coating-33mm, 300cm-length, 0.014”diameter, Stainless Steel coil length-26mm, floppy & standard,J tip
353	195cm-length, hydrophilic coating-27mm, 0.014”diameter, with polymer cover, Floppy, intermediate, standard,Straight tip/ J tip
354	hydrophilic coating-27mm, 300cm-length, 0.014”diameter, with polymer cover, Floppy, intermediate, standard,Straight tip/ J tip
355	185cm-length, hydrophilic coating-40mm, 0.014”diameter, Stainless Steel coil length-2cm, Floppy, intermediate, standard,Straight tip/ J tip
356	hydrophilic coating-40mm, 300cm-length, 0.014”diameter, Stainless Steel coil length-2cm, Floppy, intermediate, standard,Straight tip/ J tip
357	FDA Approved Nitinol Wire with Soft & A traumatic tip with Hydrophilic coating at the distal end & hydrophobic at the proximal end core to tip design, 0.8 g tip load,Straight tip/ J tip
358	Extra support wire guide for neonatal interventions: Nitinol core, PTE coating , flexible platinum tip. 1:1 torque control. 014 and 018 inch, 180,270 and 300 cm lenth. . Internationally accepted Cook quality and equal performance needed for patient safety
359	PTFE Guidewire :018, 021,025 inch, Regular and exchange length
360	FDA Approved Nitinol Wire with Soft & A traumatic tip for excellent torque and tip control with .9g tip load, stainless steel, straight tip/j tip
361	FDA Approved Peripheral Guide Wire for CTO, Stainless steel with Microglide coating , 4.8 to 13 gm tip load ,190,300cm Length
362	DOC EXTENSION 0.14-0.018 X 145 cm , can be detached after use, designed to provide the necessary length to allow the exchange of one cathether for another while maintaining the position of the guide wire in the artery
363	Embolic Protection Devices
364	heparin coated , braided nitinol filter with gold –tungsten loop, 3-6mm lumen size distal embolic protection Device for SVG interventions, 0.014”,Wire length: OTW/RX: 190/320 Heparin coated filter size: 3-6mm
365	0.018” wire, braided nitinol heparin coated filter with gold –tungsten loop, 3-7mm lumen size distal embolic protection Device for carotid interventionsCompatible vessel diameter-2-7mm, heparin coated filter
366	braided nitinol heparin coated filter with gold –tungsten loop, 0.018” wire, 3-7mm lumen size distal embolic protection Device for lower limb interventions,Compatible vessel diameter-2-7mm, heparin coated filter
367	Polyurethane filter pore size-110 micron with nose cone, 2.25-3.5F lumen size distal embolic protection device for carotid interventions,Wire length: OTW/RX: 190/300 Filter size: 3-7F
368	3.5-5.5F lumen size, Polyurethane filter pore size-110 micron with nose cone, Distal Embolic protection Device for carotid interventions,Wire length: OTW/RX: 190/300 Filter size: 3-7F
369	Guidewire with 90 0 rotated Filter basket with obturator, pore size 150µm Distal embolic protection System,Compatible vessel diameter-3.25-7mm
370	Self centering umbrella design filter with 8 nitinol struts, emboli capture guide wire system for carotid interventions,Compatible vessel diameter – 3-7.5mm
371	Barewire filter delivery wire type distal protection device for coronary interventions, Unconstrained Filter Diameter – 5.0mm,Compatible vessel diameter - 2.5–4.8 mm,with 120UM pore size
372	Barewire filter delivery wire type distal protection device for peripheral interventions, Unconstrained Filter Diameter -7.2mm, Compatible vessel diameter - 4.0-7.0 mm
373	Polethylene terephthalate type filter Distal embolic protection device,Compatible vessel diameter-3.5 -7mm
374	PTFE type distal protection device, Filter with 100 Micron Poresand hydrophilic heparin coating with diamond frame,Distal protection device -Filter
375	Proximal Cerebral Protection Device,Reference common carotid artery diameter - 5–13 mm
376	Inflation Devices
377	Squeeze Handle with Prime lock Inflation Device,Pressure range: 0-30 / Barrel volume: 20 ml
378	Ordinary Handle Latch type inflation device,-Pressure: 0-30,
379	Inflation device, piston handle type intra-cam locking mechanism,Barrel volume-20ml, Pressure range: 0-30
380	High pressure inflation device piston handle with finger latch mechanism,Barrel volume- 20ml, 0-30
381	FDA Approved Inflation Device with 20 to 30 Atmosphere
382	CE Approved Inflation Device
383	Special Inflation Device for high pressure(55 ATM). Swiss made, High Resolution
384	inflation device Maximum Pressure of 30 atm, 20ML clear syringe barrel with smooth moving plunger,self locking mechanism for easy locking as well as gradual and rapid pressure release Ergonomic handle and Precision manometer.
385	Y- Connectors
386	Silicon valve material type Y connector,Bonded extension tube length 20cm, Push-pull type hemostatic valve
387	Ordinary Y Connector,Bonded extension tube 25CM, Push-pull type hemostatic valve
388	Rotating Y connector with 2 way adjustable valve,Rotating Y-connector/2-way adjustable valve
389	Rotating double Y connector with 3 way adjustable valve,Rotating double Y-connector/3-way adjustable valve
390	High pressure resistance Y connector ,Pressure resistance of atleast 8 atm, push pull type, inner lumen diameter-0.025”, Guidewire compatibility – 0.010” - 0.014”
391	FDA Approved Y Connector
392	FDA Approved Effectively minimizes blood loss alomost Nil and provides a smooth channel for interventional device delivery. Comes with one fixed Valve and one Hemostatis Valve, only Y connector wqith 10 F Bore size, for usage with a variety of devices. Along with Intoducer Needle and Torque. From Japan.
393	Two in One click and screw type Hemostatic Valve, 10Fr Inner Lumen
394	PTCA Y connector 400 Kpa leak-proof seal from proprietary designed valve,open and close by twisting,7F-9f compatible lumen allowing delivery of wide range of devices and torque and introducer fit 0.014\"-0.021\" guide wire.
395	Vascular Access Devices
396	Hemostasis Valve :Hemostasis assembly to prevent bleeding from ends of catheters, with facility of side arm for flushing and injection. . Internationally accepted Cook quality and equal performance needed for patient safety
397	Puncture needle(radial) – cook model,
398	Puncture needle(16G, 18G, 7cm, 20cm)
399	Puncture needle(20G, 21G, 4cm)
400	Micro puncture needle
401	Radial sheath without nitinol guide wire, 4F- 6F/ length 5-7cm - wire length 45cm, wire dimension0.025
402	Radial sheath 11 cm long,Size-4-6F, length – 11cm, guidewire-0.021-0.025,
403	Radial sheath 5& 7.5cm long,Size-4-6F, length – 5 & 7.5cm, guidewire-0.021
404	FDA APPROVED Radial sheath 7 cm long Size ranging from 4Fr to 7Fr, length 7- 11cm, guidewire-0.021,
405	CE APPROVED Radial sheath 7 cm long Size ranging from 4Fr to 7Fr, length 7- 11cm, guidewire-0.021,
406	PMDA approved Radial sheath with nitinol guide wire – sheath size ranging from 6F,length ranging from 7cm - wire length 45cm, wire dimension0.025,Cross-cut haemostasis valve effectively avoids blood reflux and air aspiration
407	Radial sheeth 10cm long, guide wire 0.025(plastic) with unique thin wall structure for perform procedure with out upsizing to a large sheath with international terumo quality.
408	TS femoral sheath: 11 cm long Input TS femoral sheath with 0.038 inch guide wire,6f
409	TS femoral sheath: 23 cm long Input TS femoral sheath with 0.038 inch guide wire,6f
410	Femoral Sheath-Adult 0.035 inch Guide wire,4-9 F size
411	25cm long, Size femoral sheath size ranging from 6f ,with guide wire
412	25 cm long femoral sheath without guide without wire but compatible with 0.038 wire,10-14 F
413	13-80 cm long, Large Valve femoral sheath,9-18 F
414	5-23 cm long, Radial sheath with 0.018 inch guide wire,4-6 F
415	5-45 cm long, small Valve femoral sheath,4-8 F
416	90 cm long, Brite Tip interventional sheath ,4-11 F
417	23 cm long Input TS femoral sheath with 0.038 inch guide wire,5-11 F
418	Pediatric long sheaths : Long guiding sheaths with hemostasis valve , hydrophilic coating and radio opaque band, All available FRench sizes including 4 and 5 FR , all curves . Internationally accepted Cook quality and equal performance needed for patient safety
419	28 cm long, Sentrant introducer sheath with hydrophilic coated guide wire,12-26 F
420	Prelude ACT sheathintroducer,4.5-8.5F
421	Prelude Ease hydrophilic Femoralsheath,4-7F
422	16cm-45cm long Adelante PeelAway Femoralsheath ,6-12.5F
423	4cm-6cm long Femoral sheath with 0.021 inch guide wire,10-25F
424	5cm-35cm long Ultimum Femoral sheath,4F-22F
425	5.5cm long femoral sheath,4F-11F size
426	10cm long femoral sheath -pediatric, 4F-11F size
427	11cm long femoral sheath,4F-8F size
428	23cm long femoral sheath,4F-8F Size
429	23cm long, femoral sheath,9F-11F Size
430	femoral sheath 11 cm long Size ranging from 6F, length – 11cm, guidewire-038, kink-resistant cannula design integrating a soft, flexible inner layer with a stiffer outer layer designed to increase bendability and support, and decrease kinking.
431	femoral sheeth 11 cm long Size ranging from 7F, length – 11cm, guidewire-038, kink-resistant cannula design integrating a soft, flexible inner layer with a stiffer outer layer designed to increase bendability and support, and decrease kinking.
432	long metalic sheeth flexible and kink resistant length :45cm & 7f
433	Long guiding sheath with coil - reinforced construction for kink resistance, with PTFE coated large lumen with hydrophilic coating and radio - opaque band at the tip, 4 to 12 FR sizes, all available tip curves(straight , MP, RDC, Cobra), lengths 45, 55, 70, 110 cms. . Internationally accepted Cook quality and equal performance needed for patient safety,Long Sheath for paediatric procedures
434	Long guiding sheaths with hemostasis valve , hydrophilic coating and radio opaque band, All available FRench sizes including 4 and 5 FR , Mullins Curve and Childrens Hospital of Boston Curve. . Internationally accepted Cook quality and equal performance needed for patient safety,Long Sheath - small diameter for neonatal and paediatric procedures
435	Straight hub , FEP polymer , radio opaque , 16-20 G , puncture needle
436	Diagnostic Guidewires
437	Hydrophilic guide wire, black,(0.018 - 0.038 X 80 CM - 180CM), angled / straight tip type
438	Hydrophilic guide wire, black,(0.018 - 0.038 X 260 CM), angled / straight tip type
439	PDMA approved Hydrophilic guide wire,(0.018 - 0.038 X 80 CM - 180CM), angled / straight tip type
440	PDMA approved Hydrophilic guide wire,(0.018 - 0.038 X 260 CM), angled / straight tip type
441	150cm Hydrophilic guide wire, blue,(0.018 - 0.038 X 80 CM - 180CM), angled / straight tip type
442	Exchange length Hydrophilic guide wire, blue,(0.018 - 0.038 X 260 CM), angled / straight tip type
443	Diagnostic guide wire single length ,(0.018 - 0.038 X 80 CM - 180CM), angled / straight tip type
444	Diagnostic guide wire,(0.018 - 0.038 X 260 CM), angled / straight tip type
445	PTFE coated guidewire,(0.018 - 0.038 X 80 CM - 180CM), angled / straight tip type
446	PTFE coated guidewire,(0.018 - 0.038 X 260 CM), angled / straight tip type
447	AMPLATZ WIRE,Lengths- 260, 300cm, Tip - Straight/shapable, 0.035”
448	AMPLATZ WIRE,Lengths- 150cm, Tip - Straight/shapable, 0.035”
449	AMPLATZ WIRE,super stiff,Lengths- 260, 300cm, Tip - Straight/shapable, 0.035”
450	AMPLATZ WIRE,super stiff,Lengths- 150cm, Tip - Straight/shapable, 0.035”
451	AMPLATZ WIRE,extra stiff,Lengths- 260, 300cm, Tip - Straight/shapable, 0.035”
452	AMPLATZ WIRE,extra stiff,Lengths- 150cmcm, Tip - Straight/shapable, 0.035”
453	Snares
454	2.3 - 3F size Coronary microsnare,Length 150 , 175cm
455	3.2F size coronary snare,Length-150 cm
456	4,6F size coronary snare,Length- 102 cm
457	6-7 F size coronary snare,Length- 100 cm
458	Catheter outside diameter:4F-6F,Catheter length:48cm-102cm
459	3 Loop Snare all size
460	Peripheral snare,Size: 9-11 F / length: 63,58cm.
461	Interventions for Congenital/Structural Heart Disease
462	Balkin sheath,5.5F-7F,length -40, 45cm
463	Mullins Sheath (Pediatric),6F-9F
464	Mullins sheath ,10F- 14F
465	NIH catheter,4F – 7F
466	Goodale – Lubin Catheter,4F – 7F
467	Pig Tail Catheter,4F – 6F
468	Berman Angiographic Catheter,5F – 7F
469	Swan-Ganz Wedge Pressure Catheter,5F – 7F
470	Sapien XT Trans catheter Heart Valve with Ascendra delivery system,Transapical Delivery system (TAVI)-24-26 F
471	Sapien XT Trans catheter Heart Valve with Ascendra delivery system,Transfemoral access (TAVI)-16,18,20 F
472	Sapien XT Trans catheter Heart Valve with Ascendra delivery system,Transfemoral access (TAVI)-14,16F
473	CoreValve Transcather- Aortic valve replacement system,18 F self Expanding ( TAVI)
474	Melody Transcather pulmonary valve ,22 F Balloon Expandable( TAVI)
475	Transcatheter aortic valve replacement system : navigator balloondual stopper system ExpandableValve materialBovine pericardium tri-leaflet on a Nickel-Cobalt alloy frameValve ,Hybrid Honeycomb cell designDelivery System. 0.035\" Guidewire compatible and catheter length of 120 cm, Diameters: 20 mm, 21.5 mm, 23 mm, 24.5 mm,26 mm, 27.5 mm, 29 mm
476	General Items
477	IABP Pressure Cable and ECG Cable Set :IABP Pressure Cable and ECG Cable Set suitable for ARROW machine
478	IABP balloon all size compatible with Arrow Autocat 2
479	Helium cylinder for IABP, ARROW COMPATIBLE
480	FFR wire
481	FFR connecting cable
482	FFR Wire - 0.014\"with medium weight support , hydrophilic coating ,flat corewire design ,high -fidelity sensor technology ,radio opaque tip,frequency range -2.4000-2.4835Ghz (ISM band ),Pressure range -30to +300mmHg
483	FFR wire compatible with ILUMIEN OPTIS
484	FFR wire compatible with volcano
485	IVUS catheter for VOLCANO
486	3 D OCT catheter,
487	dragon fly optis /DUO OCT imaging catheter :compatible with ilumein optis, ,provide continuous calibration throughout pullback ,,pull back lengh -54 (high resolution ) 75 (survey )mm ,imaging up 180frames per sec ,3 radio opaque markeres at the distal tip ,imaging lens 50mm proximal ,2.7F crossing profile ,compatible with 0.014\"&6F guide catheter
488	Rotablation set,
489	Rotablation burr,
490	Rota wire,
491	IVL CATHETER
492	Dual lumen catheter,
493	Embolization coil for iliac artery
494	Detachable coil system,
495	Coil detacher/Bioptome cable,
496	Micro catheter for neuro intervention,
497	Neuro wires,
498	Neuro balloons,
499	Cable set,
500	Electrophysiology

Tender Documents

SR No	FileName	File Description
1	Click here to download tender document	Tender Documents
2	Click here to download tender document	Tender Documents
3	Click here to download tender document	Tender Documents
4	Click here to download tender document	Tender Documents
5	Click here to download tender document	Tender Documents
6	Click here to download tender document	Tender Documents

Also Visit

Tenders

Kerala Tenders

Laboratory Equipment and Supplies Tenders

Laboratory Equipments Tenders

Laboratory Equipment Tenders

Disclaimer

We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.

Top

Tender For Supply Of Cath Lab Consumables, Palakkad-Kerala

Tender Documents

Disclaimer

About Us

Services

Browse Tenders

For Sales Inquiry

Tender For Supply Of Cath Lab Consumables, Palakkad-Kerala

Tender Documents

Disclaimer

OTP Verification

About Us

Services

Browse Tenders

For Sales Inquiry

Connect With Us