Tender For Up-Gradation Of Infrastructure Development For Emrs Tamenglong, Manipur., Tamenglong-Manipur

TDR : 53106530

Tender Notice
BOQ

18 Days Left

Tamenglong , Manipur

Tender Brief : Tender For Up-Gradation Of Infrastructure Development For Emrs Tamenglong, Manipur.

Document Fees
₹ 25000 /-

EMD
₹ 4201336.0 /-

Tender Value
₹ 21 Crore /-

Submission Date
12-01-2026

Competition Type
Indian

Bidding Type
Tender

Need a Business Loan? Apply Now !


1	SUB-HEAD ; BOY\"S HOSTEL WITH KITCHEN CUM DINNING HALL ;
2	Earth work in excavation by mechanical means (Hydraulic Excavator )/ manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan) including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. All kinds of soil.
3	Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m.
4	Supplying and filling in plinth with sandy soil under floors including, watering,ramming consolidating and dressing complete.
5	Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering -All work upto plinth level: a) 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size)
6	Providing and laying damp-proof course 50 mm thick with cement concrete. (a) 1:2:4 (1cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size).
7	Extra for providing and mixing water proofing materials in cement concrete work1 kg per 50 kg of cement.
8	Applying a coat of residual petroleum bitumen of grade of VG-10 of approved quality using 1.7 kg per square metre on damp proof course after cleaning the surface with brushes and finally with a piece of cloth lightly soaked in kerosene oil.
9	Providing plinth protection 50 mm thick in cement concrete 1:3:6 (1 cement: 3coarse sand:6 graded stone aggregate of 20 mm nominal size) i/c finishing the top surface of concrete smooth.
10	Providing and laying in position ready mixed or site batched design mix cement concrete for reinforced cement concrete work; using coarse aggregate and fine aggregate derived from natural sources, Portland Pozzolana / Ordinary Portland /Portland Slag cement, admixtures in recommended proportions as per IS: 9103 to accelerate /retard setting of concrete, to improve durability and workability without impairing strength; including pumping of concrete to site of laying, curing, carriage for all leads; but excluding the cost of centering, shuttering, finishing and reinforcement as per direction of the engineer-in-charge; for the following grades of concrete.UPTO PLINTH
11	Concrete of M-25 grade with minimum cement content of330 kg/cum.
12	Providing and laying in position ready mixed or site batched design mix cement concrete for reinforced cement concrete work; using coarse aggregate and fine aggregate derived from natural sources, Portland Pozzolana / Ordinary Portland /Portland Slag cement, admixtures in recommended proportions as per IS: 9103 to accelerate /retard setting of concrete, to improve durability and workability without impairing strength; including pumping of concrete to site of laying, curing, carriage for all leads; but excluding the cost of centering, shuttering, finishing and reinforcement as per direction of the engineer-in-charge; for the following grades of concrete. All works upto Plinth level. ABOVE PLINTH
13	Concrete of M-25 grade with minimum cement content of330 kg/cum.
14	Reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete up to plinth level.
15	a) Thermo-Mechanically Treated bars.
16	Centering and shuttering including strutting, propping etc. and removal of form for:
17	a) Foundations, footings, bases of columns, etc. for mass concrete.
18	b) Lintels, beams, plinth beams, girders, bressumers and cantilevers.
19	c) Suspended floors, roofs, landings, balconies and access platform.
20	d) Columns, Pillars, Piers, Abutments, Posts and Struts.
21	e) Staircase with sloping or stepped, soffits i/c risers and stringes e/c landing.
22	Brick work with Ist class common burnt clay F.P.S. (non modular) bricksin foundation and plinth in: Cement mortar 1:4 (1 cement : 4 coarse sand)
23	Half brick masonry with Ist class common burnt clay F.P.S. (non modular) bricksin superstructure above plinth level upto floor V level in Cement mortar 1 : 3 (1 cement : 3 coarse sand)
24	Providing wood work in frames of doors, windows, clerestory windows and other frames,wrought framed and fixed in position with hold fast lugs or with dash fastener of required dia and length (hold fast lugs or dash fastener shall be paid for separately :Local best quality Teak wood
25	Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick : Local best quality Teak wood
26	Providing 40x5 mm flat iron hold fast 40 cm long including fixing to frame with 10mm diameter bolts, nuts and wooden plugs and embedding in cement concrete block 30x10 x 15cm 1:3:6 mix (1 cement : 3 coarse sand : 6 graded stone aggregate 20mm nominal size)
27	Providing and fixing bright finished brass butt hinges with necessary screws etc. complete :75x65x4 mm (heavy type)
28	Providing and fixing bright finished brass towerbolts (barrel type)with necessary screws etc. complete : 250x10 mm
29	150X10mm
30	Providing and fixing bright finished brass handles with screws etc. complete :125 mm
31	100mm
32	Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete.
33	Fixed to openings /wooden frames with rawl plugs screws etc.
34	Providing and laying Vitrified tiles in floor in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in all colours and shade, laid on 20 mm thick cement mortar 1:4 (1 cement: 4 coarse sand) jointing with grey cement [email protected] kg/sqm including grouting the joints with white cement and matching pigments etc. The tiles must be cut with the zero chipping diamond cutter only . Laying of tiles will be done with the notch trowel, plier, wedge, clips of required thickness, leveling system and rubber mallet for placing the tiles gently and easily.
35	Size of Tile 600 x 600 mm
36	Providing and laying Vitrified tiles in different sizes (thickness to be specified by manufacturer) with water absorption less than 0.08% and conforming to I.S. 15622, of approved make, in all colours & shade, in skirting, riser of stepts , over 12mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand), jointing with grey cement slurry @ 3.3kg/sqmincluding grouting the joint with white cement & matching pigments etc. complete.
37	Sizes of Tiles 600x600 mm (double charged)Branded
38	Marble stone flooring with18mm thick marble stone (sample of marble shall be approved by Engineer-in-charge) over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with grey cement slurry including rubbing and polishing complete with :a) Raj Nagar plain
39	Tile work in skirting, risers of steps and dado (upto 2 m height) over 12 mm thick bed of cement mortar 1:3 (1 cement :3 coarse sand) and jointed with grey cement slurry @ 3.3 kg/sqm including pointing in white cement mixed with pigment of matching shade complete.Mable tiles (polished ) Raj Nagar.
40	Extra for prefinished nosing to treads of steps of marble stone.
41	12 mm cement plaster 1:4(1 cement:4 finesand).
42	12 mm cement plaster on rough side of single or half brick wall finished with a floating coat of neat cement of mix : 1:3 ( 1 cement : 3 fine sand)
43	Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade
44	New work (two or more coats) over and including priming coat with cement primer:-
45	Finishing walls with water proofing cement paint of required shade : New work ( Two or more coats applied @3.84 kg/10 sqm)
46	Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface :Water thinnable cement primer
47	Providing and applying white cement based putty of average thickness 1mm,of approved brand and manufacturer, over the plastered wall surface to preparethe surface even and smooth complete.
48	Applying priming coat:-With ready mixed pink or Grey primer of approved brand and manufacture on wood work (hard and soft wood)
49	Painting wood work with Deluxe Multi Surface Paint of required shade. Two or more coat applied @0.90 ltr/10 sqm over an under coat of primer applied @0.75 ltr/ 10 sqm of approved brand or manufacture
50	INTERNAL WATER SUPPLY AND SANITARY INSTALATION :
51	CHLORINATED POLYVINYL CHLORIDE (CPVC) pipes
52	Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. including cutting chases and making good the walls etc.External worka) 50mm dia
53	Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. Internal work -Conceal worka).32mm dia
54	SANITARY FITTINGS COMPLETE
55	Providing and fixing water closet squatting pan (Indian type W.C. pan) with 100 mm Sand Cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required: a).White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests
56	Providing and fixing white vitreous china pedestal type water closet Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required: a).W.C. pan with ISI marked white solid plastic seat and lid
57	Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever required: a).White Vitreous China Wash basin size 630x450 mm with a pair of 15 mm C.P. brass pillar taps
58	Providing and fixing white vitreous china pedestal for wash basin completely recessed at the back for the reception of pipes and fittings.
59	Providing and fixing 8 mm dia C.P. / S.S. Jet with flexible tube upto 1 metre long with S.S. triangular plate to Eureopean type W.C. of quality and make as approved by Engineer - in -charge.
60	Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm and 340x410x265 mm sizes respectively with automatic flushing cistern with standard flush pipe and C.P. brass spreaders with brass unions and G.I clamps complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required : a).One urinal basin with 5 litre white P.V.C. automatic flushing cistern
61	BRASS AND CP BRASS FITTINGS
62	Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931 : a) 15 mm nominal bore
63	Providing and fixing brass stop cock of approved quality. a) 15 mm diameter
64	Providing and fixing Water Storage Tanks with 400 mm diameter nominal base G.I. overflow tube 25 mm nominal G.I. inlet and 15 mm nominal G.I. outlet tube i/c hoisting a height of 10 m above ground level. a) 2000 litres net capacity storage tanks
65	Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6mm thick hard board backing : a) Rectangular shape 453x357 mm
66	Providing and fixing PTMT towel ring trapezoidal shape 215mm long, 200mm wide with minimum distances of 37mm from wall face with concealed fittings arrangement of approved quality and colour, weighing not less than 88 gms.
67	Providing and fixing C.P. brass toilet paper holder
68	Providing and fixing PTMT liquid soap container 109 mm wide, 125 mm high and 112 mm distance from wall of standard shape with bracket of the same materials with snap fittings of approved quality and colour, weighing not less than 105 gms.
69	SH:-PVC Pipes and Fitting
70	Providing and fixing PVC soil ,waste and vent pipes.External a).100mm dia
71	Providing and fixing PVCvent cowl.a).100mm dia
72	Providing and fixing MS holder bat clamps of approved design to 100 mm HCI pipe socket i/c cost of cutting holes and making good the walls etc. including cost of cutting holes and making good the walls etc.
73	Providing and fixing PVC soil ,waste and vent pipes. a) 75mm dia
74	Providing and fixing PVC NAHANI TRAP. a) 75mm
75	Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete.A).Flexible pipe--32 mm dia
76	Supply and installation of water pump Tulu (Texmo) 1HP of approved quality.
77	SEPTIC TANK
78	Earthwork in excavation in foundation trenches or drains including dressing of sides and ramming of bottoms lift upto 1.5metres including getting out the excavated soil and disposal of surplus excavated soil as directed within a lead of 50 metres.All kinds of soil.
79	Filling available excavated earth(excluding rock) in trenches,plinth sides of foundation etc. in layers not exceeding 20 cm in depth,consolidating each deposited layer by ramming and watering lead upto 50 metres lift upto 1.5 metre
80	P/L cement concrete in foundation and plinth excluding the cost of centering and shuttering in 1:4:8(1 cement: 4course sand: 8 graded stone aggregate 40mm. nominal size
81	Providing and laying in position ready mixed or site batched design mix cement concrete for reinforced cement concrete work; using coarse aggregate and fine aggregate derived from natural sources, Portland Pozzolana / Ordinary Portland /Portland Slag cement, admixtures in recommended proportions as per IS: 9103 to accelerate /retard setting of concrete, to improve durability and workability without impairing strength; including pumping of concrete to site of laying, curing, carriage for all leads; but excluding the cost of centering, shuttering, finishing and reinforcement as per direction of the engineer-in-charge; for the following grades of concrete. All works upto Plinth level.Concrete of M-25 grade with minimum cement content of330 kg/cum. All works upto Plinth level.
82	Concrete of M-25 grade with minimum cement content of330 kg/cum.
83	Providing and laying in position ready mixed or site batched design mix cement concrete for reinforced cement concrete work; using coarse aggregate and fine aggregate derived from natural sources, Portland Pozzolana / Ordinary Portland /Portland Slag cement, admixtures in recommended proportions as per IS: 9103 to accelerate /retard setting of concrete, to improve durability and workability without impairing strength; including pumping of concrete to site of laying, curing, carriage for all leads; but excluding the cost of centering, shuttering, finishing and reinforcement as per direction of the engineer-in-charge; for the following grades of concrete. All works upto Plinth level.Concrete of M-25 grade with minimum cement content of330 kg/cum. All works upto Plinth level.
84	Concrete of M-25 grade with minimum cement content of330 kg/cum.
85	Steel reinforcement for R.C.C work including straightening,cutting, bending, placing in position and binding all complete.a)Thermo mechanically treated bars
86	Providing form works i/c centering and shuttering so as to give a rough finish, strutting and propping etc. height of propping and centering below supporting floor to ceiling not exceeding 4 m and removal of the same for in-situ reinforced concrete and plain concrete work in
87	(a) Foundation, footing, bases of columns etc. and mass concrete.
88	b) Suspended floors, roofs, landings, balconies and access platform.
89	c) Walls (any thickness) including attached pilasters, buttresses, plinth and string courses etc.
90	Providing and fixing C.I. Cover frame (for manhole and chambers).a).600 mm x 450 mm (heavy duty)
91	INTERNAL ELECTRICFICATION ISTALATION (IEI).
92	Wiring for light/fan point/Exhaust fan point/ call bell point with 1.5 mm2 PVC insulated copper conductor single core cable inPVC casing & capping with modular type switch,modular plate size,G.I. box and earthing the point with 1.5 mm2 PVC insulated copper conductor single core cable etc. as reqd.
93	1. Group A
94	2. Group B
95	3. Group C
96	Wiring for light point/power plug with 2x4 mm2 PVC insulated copper conductor single core cable in PVC casing & capping along with 1 no. 4mm2 PVC insulated copper conductor single core cable for loop earthing etc. as reqd.
97	Wiring for circuit/Sub-main wiring with earth wire with (the following sizes of) PVC insulated conductor single core cable in PVC casing & capping etc.as reqd.
98	(a) 2X1.5mm2+1X1.5mm2 earth wire
99	(b) 2X2.5mm2+1X2 .5mm2 earth wire
100	(c) 2X4mm2+1X4mm2 earth wire
101	(d)2X6mm2+2X6mm2 earth wire
102	(e) 2X10mm2+2X10mm2 earth wire
103	Supply and fixing (following modular type switch/socket) on the existing modular plate and switch box i/c connection but excluding modular plate etc as reqd.
104	(a) 5/6 amps switch
105	(b) 15/16 amps switch
106	(c) 3 pin 5/6 amps socket outlet
107	(d) 6 pin 15/16 amps socket outlet
108	S/F 25 amp Air-conditioner power plug point i/c 4 modules metal box on surface or in recess 4-modules plate and cover in front,25 amp modular starter 25 amp modular socket outlet and 25 amp plug i/c connection etc as reqd.
109	S/F stepped type electronic fan regulator on the existing modular plate switch box i/c connection but excluding modular plate etc.
110	S/F (following way) single/double pole and nuetral, sheet steel MCCB distributuion board, 240V on surface/recessed complete with tinned copper bus bar neutral bus bar, earth bar,din bar detachable gland plate, interconnection, phosphatized and powder painted i/c earthing etc as reqd (but without MCB/RCCB/lsolator) (a) 16 way double door
111	S/F 5 amp to 32 amp rating 230V \"B\" series MCB for lighting and other load of (following poles) in the existing MCB DB complete with connection testing and commissioning etc.asreqd. (a) Single pole
112	S/F (following rating) double pole 240V isolator in the existing MCB DB complete with connection,testing and commissioning as reqd. (a) 63 amp
113	Earthing with copper plate 600x600xmm thick i/c accessories and providing masonary enclosure with copper plate having locking arrangement and watering pipes etc.(but without charcoal and salt complete as reqd.)
114	Extra for using salt and charcoal for G.l.plates or copper plate earth electrode as reqd.
115	P/Learth connection from earth electrode with 4mm dia copper in 15 mm dia GI pipe as reqd.
116	S/F 48\" sweep AC ceiling fan complete with down rod, canopy 3 (three) blades but without regulator etc as reqd. (make Bajaj/Usha or similar)
117	S/F 12\"(305mm) dia light duty exhaust fan complete with all accessories i/c connection etc as reqd.
118	S/F Recess mounting LED down lighters BGSL 0101WH, 220223, cast aluminium housing, fixed with collimated lens, 1x1W white LED mounted on MCPCB, extruded Al. Heat sink spring loaded mounting clips comlplete with connection etc. As reqd.
119	S/F 2 tone capacity split type air conditioner, (Diamond 3 star,5 G30,G-SC 24 FD 3WJH) complete with indo voltage Stabilizer, Automatic 5 KVA (140-280 for 2 ton)
120	Supply, Installation, Testing & Commissioning of LT Panel , cubicle type, made out of 2mm thick CRCA sheet,totally enclosed, IP 42, free standing, floor mounting, dust and vermin proof, indoor, compartmentalised, suitable for operation on 3 phase , 415 V, 50Hz AC system with busbars, including internal wiring with suitable size HFFR wires/cable, interconnection, duly powder coated with seven tank process etc., including all inter connections and following components as per drawing and technical specifications. INCOMER 200 A FP 125kA MCCB with adjustable thermal magnetic release with OL & SC protection - 2 nos. BUSBARS 200 Ampere TPN busbars of Aluminum alloy high conductivity with heat shrinkable coloured sleeves INSTRUMENTS Digital type multifunction meter with CTs of suitable rating for measurement of voltage, current, frequency, power factor, KVA, KW, KWH. - 1 No ON/OFF indicationlamps-1set RYB Indicating lamps LED type - 3 Nos. OUTGOINGS 100A FP. 125kA MCCB with adjustable thermal magnetic release with OL & SC protection - 4 nos. 100A/63A FP 25kA MCCB with thermal magnetic release with OL & SC protection - 6 nos.
121	External Electrification Installation& Fire Fighting
122	Distribution transformer 250kva
123	9m Steel Tubular poles (410 SP-3 l)
124	Channe I 1 00X5 0.@,7 .9 Ke/ m 2.8X2 for supporting Transformer
125	Channel 100X50,@7.9 Kflm2.8X2 for D.P. X-arm
126	Channel 100X50.@7 .9 Kelm 0 .46X2 for supporting of item 3
127	Channel 75X40,@5.7Kglm2X2.8m for HG fuse unit & A.B. switch
128	Channel 75X40,@5.7Kglm2Xl.0m A.B. switch main chamel X-arm.
129	Channel 75X40,@5.7Kglm 2X0.5m for supporting H.G. fuse main channel Xarrn
130	Angle (50X50X6)mm 2.8X2 @ 4.5 Kg/m transformer belting and Angle(35X35X5),0 .46X2 @ 2.6 K!m. Transformer belting support.
131	Clamp for transformer base channel for M.S. flat [email protected]/m027nX2.
132	Clamp for A.B. switch bracing 50X8mm @ 3.lKflm 0.23mX2:0.46m.
133	Clamp for HG Fuse Bracing for MS Flat 50x8mm @3.1K91m,023nx2
134	11KV A.B.Switch 200 Amp
135	Horn gap fuse unit/D.O. fuse
136	D.B.box with complete accessories with Kit-Kat
137	D.B.box cross ann of M.S. Angle 35X35X5mm @2.6Kg1m2.8X2:5.6m
138	Sub-Station Fencing
139	Sub-Station Earthing
140	Danger board.
141	I I KV Liehtning Arrester
142	Earthing set complete with G.I. wire
143	Bolts,Nuts,clamps etc. (5/8)\" x 3\"- 8 Kg) & (5/8)\" x 8.5\"- 8 Kg)
144	Pole muffing
145	Pole painting
146	Single Core XLPE Unarmoured Cable 240 sq.mm
147	Thimble 240 sq.mm (4x4 no.)
148	Thimble 50 sq.mm
149	Erection Charge (Inclusive of Transportation & Handling Charge)
150	Earthing with copper earth plate 600mmx600mmx6mm thick lc accessories and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. (but without charcoal or coke and salt) as reqd.
151	Extra for using salt and charcoal for G.t. or copper plate earth electrode as reqd.
152	P/F 25mmx5mm copper strip in 40mm dia G.I. pipe from earth electrode as reqd
153	P / L earth connection from earth electrode with 10mm dia copper wire in 20mm dia G.L pipe as reqd
154	P/F earth bus of 32mmx6mm copper strip on surface for connection etc. as reqd.
155	Providing and Fixing of lightning conductor finial made of 25mm dia 300mm long copper tube having single prong at top with 85mm dia 3mm thick copper plate Uc holes etc. complete as reqd.
156	Fixing of lightning conductor finial of 25mm dia 300mm long copper /G.I. tube having single prong at top with 85mm dia 3mm thick base plate i/c hole etc. as reqd.
157	P/L copper tape 32mmx6mm from earth electrode directly in ground as reqd
158	Supply of 50 sq.mm 4 core PVC/xLPE insulated heavy duty armoured cable 1.1KV grade
159	Laying of 1 no. PVC insulated PVC sheathed power cable of l.lKV grade of size not less than 25fin0 but not exceeding l20mm2 direct in ground i/c excavation, sand cushioning, protective covering and re-filling the trench etc. as reqd.
160	Erection of steel tubular pole of length not less than l0 mtrs but not exceeding 12 mtrs. in cement concrete l:3:6 (l cement:3 coarse sand :6 graded stone agff. 40mm nominal size) foundation i./c excavation & refilling etc. as reqd.
161	Single piece cast Al. with full glass cover integral luminaries (IP66) HPSV-7OW grcy powder coated dia-cast Al\" housing complete with all accessorie
162	S/F 35 ltr water heater (Geyser) A.C. 2 Kw vertical type with all accessories , ( 150581 SKT - PLUS 35L)ilc coirnection etc as reqd
163	S/F 400W 240V HPMV lamp
164	S/F 400W 240V HPMV lamp ballast
165	S/F igniter for HPSV-2 lamp
166	600mm x 600mm x 3mm thick (10.5kg) copper plate
167	25mm x 5mm copper tape (1.15kg/mtr)
168	40 mm to 20 mm reducer
169	Charcoal
170	Coke
171	Salt
172	2.24 mm dia bare aluminium earth wire
173	Lightning ftnial,25 mm diaX 300 mm long copper
174	P/L earth connection from earth electrode with 4mm dia copper wire in 15mm dia GI pipe as reqd.
175	P/F 50mmx6mm copper strip in 80mm dia G.I. pipe from earth electrode as reqd
176	Cement Concrete Earthing Pit Cover
177	Earth strip falls
178	Testing link with bolted connection
179	Incomer 400 A, 25 kA MCCB with adjusable thermal magnetic release with O/L & SC protection with Aluminium busbar with heat skrinkablw coloured sleeves with digital type multiuction meter with CTs suitabl raing with following Outgoing
180	63 A MCCB 25k thermal Magnetic based with O/L & S/C Protection Release
181	Fire Fighting
182	Providing and Fixing of fire fighting system
183	Supply and installation of ABC type fire extinguisher 4 kg
184	Supply and installation of CO2 type fire extinguisher
185	Fire Hose reels
186	Sprinkler main pipe 150ø
187	Pendent Sprinklers
188	Sprinkler Branch pipe 20ø
189	Sprinkler Branch pipe 25ø
190	Sprinkler Branch pipe 32ø
191	Sprinkler Branch pipe 40ø
192	Sprinkler Branch pipe 50ø
193	Sprinkler Branch pipe 65ø
194	Sprinkler Branch pipe 80ø
195	Fire Sprinkler Alarm Valve With Water Motor Gong
196	Siren
197	Data gathering fire alarm panel
198	Manual call point (MCP)
199	Exit Sign
200	Addressable fire alarm hooter with strobe light
201	Junction box (JB-01-01-1/02)
202	Intelligent multi sensor detecor on true ceiling
203	Fault isolator
204	Control modular
205	2p x 1.5 sqmmTwisted pair PVC insulated armoured FRLS Cable
206	3C x 2.5 sqmm PVC insulated armoured FRLS cable
207	SUB-HEAD ; GIRLS HOSTEL WITH KITCHEN CUM DINNING HALL.
208	Earth work in excavation by mechanical means (Hydraulic Excavator )/ manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan) including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. All kinds of soil.
209	Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m.
210	Supplying and filling in plinth with sandy soil under floors including, watering,ramming consolidating and dressing complete.
211	Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering -All work upto plinth level: a) 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size)
212	Providing and laying damp-proof course 50 mm thick with cement concrete.(a). 1:2:4 (1cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size).
213	Extra for providing and mixing water proofing materials in cement concrete work1 kg per 50 kg of cement.
214	Applying a coat of residual petroleum bitumen of grade of VG-10 of approved quality using 1.7kg per square metre on damp proof course after cleaning the surface with brushes and finally with a piece of cloth lightly soaked in kerosene oil.
215	Providing plinth protection 50 mm thick in cement concrete 1:3:6 (1 cement: 3coarse sand:6 graded stone aggregate of 20 mm nominal size) i/c finishing the top surface of concrete smooth.
216	Providing and laying in position ready mixed or site batched design mix cement concrete for reinforced cement concrete work; using coarse aggregate and fine aggregate derived from natural sources, Portland Pozzolana / Ordinary Portland /Portland Slag cement, admixtures in recommended proportions as per IS: 9103 to accelerate /retard setting of concrete, to improve durability and workability without impairing strength; including pumping of concrete to site of laying, curing, carriage for all leads; but excluding the cost of centering, shuttering, finishing and reinforcement as per direction of the engineer-in-charge; for the following grades of concrete.UPTO PLINTH
217	Concrete of M-25 grade with minimum cement content of330 kg/cum.
218	Providing and laying in position ready mixed or site batched design mix cement concrete for reinforced cement concrete work; using coarse aggregate and fine aggregate derived from natural sources, Portland Pozzolana/Ordinary Portland /Portland Slag cement, admixtures in recommended proportions as per IS: 9103 to accelerate /retard setting of concrete, to improve durability and workability without impairing strength; including pumping of concrete to site of laying, curing, carriage for all leads; but e/c the cost of centering, shuttering, finishing and reinforcement as per direction of the engineer-in-charge; for the following grades of concrete. All works upto Plinth level. ABOVE PLINTH
219	Concrete of M-25 grade with minimum cement content of330 kg/cum.
220	Reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete up to plinth level.
221	a) Thermo-Mechanically Treated bars.
222	Centering and shuttering including strutting, propping etc. and removal of form for:
223	a) Foundations, footings, bases of columns, etc. for mass concrete.
224	b) Lintels, beams, plinth beams, girders, bressumers and cantilevers.
225	c) Suspended floors, roofs, landings, balconies and access platform.
226	d) Columns, Pillars, Piers, Abutments, Posts and Struts.
227	e) Staircase with sloping or stepped, soffits i/c risers and stringes excluding landing.
228	Brick work with Ist class common burnt clay F.P.S. (non modular) bricksin foundation and plinth in: Cement mortar 1:4 (1 cement : 4 coarse sand)
229	Half brick masonry with Ist class common burnt clay F.P.S. (non modular) bricksin superstructure above plinth level upto floor V level in Cement mortar 1 : 3 (1 cement : 3 coarse sand)
230	Providing wood work in frames of doors, windows, clerestory windows and other frames,wrought framed and fixed in position with hold fast lugs or with dash fastener of required dia and length (hold fast lugs or dash fastener shall be paid for separately :Local best quality Teak wood
231	Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick : Local best quality Teak wood
232	Providing 40x5 mm flat iron hold fast 40 cm long including fixing to frame with 10mm diameter bolts, nuts and wooden plugs and embedding in cement concrete block 30x10 x 15cm 1:3:6 mix (1 cement : 3 coarse sand : 6 graded stone aggregate 20mm nominal size)
233	Providing and fixing bright finished brass butt hinges with necessary screws etc. complete :75x65x4 mm (heavy type)
234	Providing and fixing bright finished brass towerbolts (barrel type)with necessary screws etc. complete : 250x10 mm
235	150X10mm
236	Providing and fixing bright finished brass handles with screws etc. complete :125 mm
237	100mm
238	Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete.
239	Fixed to openings /wooden frames with rawl plugs screws etc.
240	Providing and laying Vitrified tiles in floor in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in all colours and shade, laid on 20 mm thick cement mortar 1:4 (1 cement: 4 coarse sand) jointing with grey cement [email protected] kg/sqm including grouting the joints with white cement and matching pigments etc. The tiles must be cut with the zero chipping diamond cutter only . Laying of tiles will be done with the notch trowel, plier, wedge, clips of required thickness, leveling system and rubber mallet for placing the tiles gently and easily.
241	Size of Tile 600 x 600 mm
242	Providing and laying Vitrified tiles in different sizes (thickness to be specified by manufacturer) with water absorption less than 0.08% and conforming to I.S. 15622, of approved make, in all colours & shade, in skirting, riser of stepts , over 12mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand), jointing with grey cement slurry @ 3.3kg/sqmincluding grouting the joint with white cement & matching pigments etc. complete.
243	Sizes of Tiles 600x600 mm (double charged)Branded
244	Marble stone flooring with18mm thick marble stone (sample of marble shall be approved by Engineer-in-charge) over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with grey cement slurry including rubbing and polishing complete with : a) Raj Nagar plain
245	Tile work in skirting, risers of steps and dado (upto 2 m height) over 12 mm thick bed of cement mortar 1:3 (1 cement :3 coarse sand) and jointed with grey cement slurry @ 3.3 kg/sqm including pointing in white cement mixed with pigment of matching shade complete.Mable tiles (polished ) Raj Nagar.
246	Extra for prefinished nosing to treads of steps of marble stone.
247	12 mm cement plaster 1:4(1 cement:4 finesand).
248	12 mm cement plaster on rough side of single or half brick wall finished with a floating coat of neat cement of mix : 1:3 ( 1 cement : 3 fine sand)
249	Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade
250	New work (two or more coats) over and including priming coat with cement primer:-
251	Finishing walls with water proofing cement paint of required shade : New work ( Two or more coats applied @3.84 kg/10 sqm)
252	Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface :Water thinnable cement primer
253	Providing and applying white cement based putty of average thickness 1mm,of approved brand and manufacturer, over the plastered wall surface to preparethe surface even and smooth complete.
254	Applying priming coat:-With ready mixed pink or Grey primer of approved brand and manufacture on wood work (hard and soft wood)
255	Painting wood work with Deluxe Multi Surface Paint of required shade. Two or more coat applied @0.90 ltr/10 sqm over an under coat of primer applied @0.75 ltr/ 10 sqm of approved brand or manufacture
256	WSSI
257	CHLORINATED POLYVINYL CHLORIDE (CPVC) pipes
258	Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. including cutting chases and making good the walls etc.External worka) 50mm dia
259	Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. Internal work -Conceal worka).32mm dia
260	SANITARY FITTINGS COMPLETE
261	Providing and fixing water closet squatting pan (Indian type W.C. pan) with 100 mm Sand Cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required: a).White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests
262	Providing and fixing white vitreous china pedestal type water closet Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required: a).W.C. pan with ISI marked white solid plastic seat and lid
263	Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever required: a).White Vitreous China Wash basin size 630x450 mm with a pair of 15 mm C.P. brass pillar taps
264	Providing and fixing white vitreous china pedestal for wash basin completely recessed at the back for the reception of pipes and fittings.
265	Providing and fixing 8 mm dia C.P. / S.S. Jet with flexible tube upto 1 metre long with S.S. triangular plate to Eureopean type W.C. of quality and make as approved by Engineer - in -charge.
266	Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm and 340x410x265 mm sizes respectively with automatic flushing cistern with standard flush pipe and C.P. brass spreaders with brass unions and G.I clamps complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required : a).One urinal basin with 5 litre white P.V.C. automatic flushing cistern
267	BRASS AND CP BRASS FITTINGS
268	Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931 :a).15 mm nominal bore
269	Providing and fixing brass stop cock of approved quality.( a).15 mm diameter
270	Providing and fixing Water Storage Tanks with 400 mm diameter nominal base G.I. overflow tube 25 mm nominal G.I. inlet and 15 mm nominal G.I. outlet tube i/c hoisting a height of 10 m above ground level.a) 2000 litres net capacity storage tanks
271	Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6mm thick hard board backing : a) Rectangular shape 453x357 mm
272	Providing and fixing PTMT towel ring trapezoidal shape 215 mm long, 200 mm wide with minimum distances of 37 mm from wall face with concealed fittings arrangement of approved quality and colour, weighing not less than 88 gms.
273	Providing and fixing C.P. brass toilet paper holder
274	Providing and fixing PTMT liquid soap container 109 mm wide, 125 mm high and 112 mm distance from wall of standard shape with bracket of the same materials with snap fittings of approved quality and colour, weighing not less than 105 gms.
275	SH:-PVC Pipes and Fitting
276	Providing and fixing PVC soil ,waste and vent pipes.External a).100mm dia
277	Providing and fixing PVCvent cowl. a).100mm dia
278	Providing and fixing MS holder bat clamps of approved design to 100 mm HCI pipe socket i/c cost of cutting holes and making good the walls etc. including cost of cutting holes and making good the walls etc.
279	Providing and fixing PVC soil ,waste and vent pipes.a).75mm dia
280	Providing and fixing PVC NAHANI TRAP.a).75mm
281	Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete.A).Flexible pipe-32 mm dia
282	Supply and installation of water pump Tulu(Texmo) 1HP of approved quality.
283	SEPTIC TANK
284	Earthwork in excavation in foundation trenches or drains including dressing of sides and ramming of bottoms lift upto 1.5metres including getting out the excavated soil and disposal of surplus excavated soil as directed within a lead of 50 metres. All kinds of soil.
285	Filling available excavated earth(excluding rock) in trenches,plinth sides of foundation etc. in layers not exceeding 20 cm in depth,consolidating each deposited layer by ramming and watering lead upto 50 metres lift upto 1.5 metre
286	P/L cement concrete in foundation and plinth excluding the cost of centering and shuttering in 1:4:8(1 cement: 4course sand: 8 graded stone aggregate 40mm. nominal size
287	Providing and laying in position ready mixed or site batched design mix cement concrete for reinforced cement concrete work; using coarse aggregate and fine aggregate derived from natural sources, Portland Pozzolana / Ordinary Portland /Portland Slag cement, admixtures in recommended proportions as per IS: 9103 to accelerate /retard setting of concrete, to improve durability and workability without impairing strength; including pumping of concrete to site of laying, curing, carriage for all leads; but excluding the cost of centering, shuttering, finishing and reinforcement as per direction of the engineer-in-charge; for the following grades of concrete. All works upto Plinth level.Concrete of M-25 grade with minimum cement content of330 kg/cum. All works upto Plinth level.
288	Concrete of M-25 grade with minimum cement content of330 kg/cum.
289	Providing and laying in position ready mixed or site batched design mix cement concrete for reinforced cement concrete work; using coarse aggregate and fine aggregate derived from natural sources, Portland Pozzolana / Ordinary Portland /Portland Slag cement, admixtures in recommended proportions as per IS: 9103 to accelerate /retard setting of concrete, to improve durability and workability without impairing strength; including pumping of concrete to site of laying, curing, carriage for all leads; but excluding the cost of centering, shuttering, finishing and reinforcement as per direction of the engineer-in-charge; for the following grades of concrete. All works upto Plinth level.Concrete of M-25 grade with minimum cement content of330 kg/cum. All works upto Plinth level.
290	Concrete of M-25 grade with minimum cement content of330 kg/cum.
291	Steel reinforcement for R.C.C work including straightening,cutting, bending, placing in position and binding all complete.a)Thermo mechanically treated bars
292	Providing form works i/c centering and shuttering so as to give a rough finish, strutting and propping etc. height of propping and centering below supporting floor to ceiling not exceeding 4 m and removal of the same for in-situ reinforced concrete and plain concrete work in
293	(a) Foundation, footing, bases of columns etc. and mass concrete.
294	b) Suspended floors, roofs, landings, balconies and access platform.
295	c) Walls (any thickness) including attached pilasters, buttresses, plinth and string courses etc.
296	Providing and fixing C.I. Cover frame (for manhole and chambers).a).600 mm x 450 mm (heavy duty)
297	INTERNAL ELECTRIFICATION INSTALATION ;
298	Wiring for light/fan point/Exhaust fan point/ call bell point with 1.5 mm2 PVC insulated copper conductor single core cable inPVC casing & capping with modular type switch,modular plate size,G.I. box and earthing the point with 1.5 mm2 PVC insulated copper conductor single core cable etc. as reqd.
299	1. Group A
300	2. Group B
301	C. Group C
302	Wiring for light point/power plug with 2x4 mm2 PVC insulated copper conductor single core cable in PVC casing & capping along with 1 no. 4mm2 PVC insulated copper conductor single core cable for loop earthing etc. as reqd.
303	Wiring for circuit/Sub-main wiring with earth wire with (the following sizes of) PVC insulated conductor single core cable in PVC casing & capping etc.as reqd.
304	(a) 2X1.5mm2+1X1.5mm2 earth wire
305	(b) 2X2.5mm2+1X2 .5mm2 earth wire
306	(c) 2X4mm2+1X4mm2 earth wire
307	(d)2X6mm2+2X6mm2 earth wire
308	(e) 2X10mm2+2X10mm2 earth wire
309	Supply and fixing (following modular type switch/socket) on the existing modular plate and switch box i/c connection but excluding modular plate etc as reqd.
310	(a) 5/6 amps switch
311	(b) 15/16 amps switch
312	(c) 3 pin 5/6 amps socket outlet
313	(d) 6 pin 15/16 amps socket outlet
314	S/F 25 amp Air-conditioner power plug point i/c 4 modules metal box on surface or in recess 4-modules plate and cover in front,25 amp modular starter 25 amp modular socket outlet and 25 amp plug i/c connection etc as reqd.
315	S/F stepped type electronic fan regulator on the existing modular plate switch box i/c connection but excluding modular plate etc.
316	S/F (following way) single/double pole and nuetral, sheet steel MCCB distributuion board, 240V on surface/recessed complete with tinned copper bus bar neutral bus bar, earth bar,din bar detachable gland plate, interconnection, phosphatized and powder painted i/c earthing etc as reqd (but without MCB/RCCB/lsolator) (a) 16 way double door
317	S/F 5 amp to 32 amp rating 230V \"B\" series MCB for lighting and other load of (following poles) in the existing MCB DB complete with connection testing and commissioning etc.asreqd. (a) Single pole
318	S/F (following rating) double pole 240V isolator in the existing MCB DB complete with connection,testing and commissioning as reqd. (a) 63 amp
319	Earthing with copper plate 600x600xmm thick i/c accessories and providing masonary enclosure with copper plate having locking arrangement and watering pipes etc.(but without charcoal and salt complete as reqd.)
320	Extra for using salt and charcoal for G.l.plates or copper plate earth electrode as reqd.
321	P/Learth connection from earth electrode with 4mm dia copper in 15 mm dia GI pipe as reqd.
322	S/F 48\" sweep AC ceiling fan complete with down rod, canopy 3 (three) blades but without regulator etc as reqd. (make Bajaj/Usha or similar)
323	S/F 12\"(305mm) dia light duty exhaust fan complete with all accessories i/c connection etc as reqd.
324	S/F Recess mounting LED down lighters BGSL 0101WH, 220223, cast aluminium housing, fixed with collimated lens, 1x1W white LED mounted on MCPCB, extruded Al. Heat sink spring loaded mounting clips comlplete with connection etc. As reqd.
325	S/F 2 tone capacity split type air conditioner, (Diamond 3 star,5 G30,G-SC 24 FD 3 WJH ) complete with indo voltageStabilizer,Automatic 5 KVA (140-280 for 2 ton)
326	Supply, Installation, Testing & Commissioning of LT Panel , cubicle type, made out of 2mm thick CRCA sheet,totally enclosed, IP 42, free standing, floor mounting, dust and vermin proof, indoor, compartmentalised, suitable for operation on 3 phase , 415 V, 50Hz AC system with busbars, including internal wiring with suitable size HFFR wires/cable, interconnection, duly powder coated with seven tank process etc., including all inter connections and following components as per drawing and technical specifications. INCOMER 200 A FP 125kA MCCB with adjustable thermal magnetic release with OL & SC protection - 2 nos. BUSBARS 200 Ampere TPN busbars of Aluminum alloy high conductivity with heat shrinkablecoloured sleeves INSTRUMENTS Digital type multifunction meter with CTs of suitable rating for measurement of voltage, current, frequency, power factor, KVA, KW, KWH. - 1 No ON/OFF indication lamps -1set RYB Indicating lamps LED type - 3 Nos. OUTGOINGS 100A FP. 125kA MCCB with adjustable thermal magnetic release with OL & SC protection - 4 nos. 100A/63A FP 25kA MCCB with thermal magnetic release with OL & SC protection - 6 nos.
327	External Electrification Installation& Fire Fighting
328	Distribution transformer 250kva
329	9m Steel Tubular poles (410 SP-3 l)
330	Channe I 1 00X5 0.@,7 .9 Ke/ m 2.8X2 for supporting Transformer
331	Channel 100X50,@7.9 Kflm2.8X2 for D.P. X-arm
332	Channel 100X50.@7 .9 Kelm 0 .46X2 for supporting of item 3
333	Channel 75X40,@5.7Kglm2X2.8m for HG fuse unit & A.B. switch
334	Channel 75X40,@5.7Kglm2Xl.0m A.B. switch main chamel X-arm.
335	Channel 75X40,@5.7Kglm 2X0.5m for supporting H.G. fuse main channel Xarrn
336	Angle (50X50X6)mm 2.8X2 @ 4.5 Kg/m transformer belting and Angle(35X35X5),0 .46X2 @ 2.6 K!m. Transformer belting support.
337	Clamp for transformer base channel for M.S. flat [email protected]/m027nX2.
338	Clamp for A.B. switch bracing 50X8mm @ 3.lKflm 0.23mX2:0.46m.
339	Clamp for HG Fuse Bracing for MS Flat 50x8mm @3.1K91m,023nx2
340	11KV A.B.Switch 200 Amp
341	Horn gap fuse unit/D.O. fuse
342	D.B.box with complete accessories with Kit-Kat
343	D.B.box cross ann of M.S. Angle 35X35X5mm @2.6Kg1m2.8X2:5.6m
344	Sub-Station Fencing
345	Sub-Station Earthing
346	Danger board.
347	I I KV Liehtning Arrester
348	Earthing set complete with G.I. wire
349	Bolts,Nuts,clamps etc. (5/8)\" x 3\"- 8 Kg) & (5/8)\" x 8.5\"- 8 Kg)
350	Pole muffing
351	Pole painting
352	Single Core XLPE Unarmoured Cable 240 sq.mm
353	Thimble 240 sq.mm (4x4 no.)
354	Thimble 50 sq.mm
355	Erection Charge (Inclusive of Transportation & Handling Charge)
356	Earthing with copper earth plate 600mmx600mmx6mm thick lc accessories and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. (but without charcoal or coke and salt) as reqd.
357	Extra for using salt and charcoal for G.t. or copper plate earth electrode asreqd.
358	P/F 25mmx5mm copper strip in 40mm dia G.I. pipe from earth electrode as reqd
359	P / L earth connection from earth electrode with 10mm dia copper wire in 20mm dia G.L pipe as reqd
360	P/F earth bus of 32mmx6mm copper strip on surface for connection etc. as reqd.
361	Providing and Fixing of lightning conductor finial made of 25mm dia 300mm long copper tube having single prong at top with 85mm dia 3mm thick copper plate Uc holes etc. complete as reqd.
362	Fixing of lightning conductor finial of 25mm dia 300mm long copper /G.I. tube having single prong at top with 85mm dia 3mm thick base plate i/c hole etc. as reqd.
363	P/L copper tape 32mmx6mm from earth electrode directly in ground as reqd
364	Supply of 50 sq.mm 4 core PVC/xLPE insulated heavy duty armoured cable 1.1KV grade
365	Laying of 1 no. PVC insulated PVC sheathed power cable of l.lKV grade of size not less than 25fin0 but not exceeding l20mm2 direct in ground i/c excavation, sand cushioning, protective covering and re-filling the trench etc. as reqd.
366	Erection of steel tubular pole of length not less than l0 mtrs but notexceeding 12 mtrs. in cement concrete l:3:6 (l cement:3 coarse sand :6 graded stone agff. 40mm nominal size) foundation i./c excavation & refilling etc. as reqd.
367	Single piece cast Al. with full glass cover integral luminaries (IP66) HPSV-7OW grcy powder coated dia-cast Al\" housing complete with all accessorie
368	S/F 35 ltr water heater (Geyser) A.C. 2 Kw vertical type with all accessories , ( 150581 SKT - PLUS 35L)ilc coirnection etc as reqd
369	S/F 400W 240V HPMV lamp
370	S/F 400W 240V HPMV lamp ballast
371	S/F igniter for HPSV-2 lamp
372	600mm x 600mm x 3mm thick (10.5kg) copper plate
373	25mm x 5mm copper tape (1.15kg/mtr)
374	40 mm to 20 mm reducer
375	Charcoal
376	Coke
377	Salt
378	2.24 mm dia bare aluminium earth wire
379	Lightning ftnial,25 mm diaX 300 mm longcopper
380	P/L earth connection from earth electrode with 4mm dia copper wire in 15mm dia GI pipe as reqd.
381	P/F 50mmx6mm copper strip in 80mm dia G.I. pipe from earth electrode as reqd
382	Cement Concrete Earthing Pit Cover
383	Earth strip falls
384	Testing link with bolted connection
385	Incomer 400 A, 25 kA MCCB with adjusable thermal magnetic release with O/L & SC protection with Aluminium busbar with heat skrinkablw coloured sleeves with digital type multiuction meter with CTs suitabl raing with following Outgoing
386	63 A MCCB 25k thermal Magnetic based with O/L & S/C Protection Release
387	Fire Fighting
388	Providing and Fixing of fire fighting system
389	Supply and installation of ABC type fire extinguisher 4 kg
390	Supply and installation of CO2 type fire extinguisher
391	Fire Hose reels
392	Sprinkler main pipe 150ø
393	Pendent Sprinklers
394	Sprinkler Branch pipe 20ø
395	Sprinkler Branch pipe 25ø
396	Sprinkler Branch pipe 32ø
397	Sprinkler Branch pipe 40ø
398	Sprinkler Branch pipe 50ø
399	Sprinkler Branch pipe 65ø
400	Sprinkler Branch pipe 80ø
401	Fire Sprinkler Alarm Valve With Water Motor Gong
402	Siren
403	Data gathering fire alarm panel
404	Manual call point (MCP)
405	Exit Sign
406	Addressable fire alarm hooter with strobe light
407	Junction box (JB-01-01-1/02)
408	Intelligent multi sensor detecor on true ceiling
409	Fault isolator
410	Control modular
411	2p x 1.5 sqmmTwisted pair PVC insulated armoured FRLS Cable
412	3C x 2.5 sqmm PVC insulated armoured FRLS cable
413	SUB-HEAD ; STAFF QUARTER BLOCK -1
414	Earth work in excavation by mechanical means (Hydraulic Excavator )/ manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan) including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. All kinds of soil.
415	Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m.
416	Supplying and filling in plinth with sandy soil under floors including, watering,ramming consolidating and dressing complete.
417	Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering -All work upto plinth level: a) 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size)
418	Providing and laying damp-proof course 50 mm thick with cement concrete.(a). 1:2:4 (1cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size).
419	Extra for providing and mixing water proofing materials in cement concrete work1 kg per 50 kg of cement.
420	Applying a coat of residual petroleum bitumen of grade of VG-10 of approved quality using 1.7 kg per square metre on damp proof course after cleaning the surface with brushes and finally with a piece of cloth lightly soaked in kerosene oil.
421	Providing plinth protection 50 mm thick in cement concrete 1:3:6 (1 cement: 3coarse sand:6 graded stone aggregate of 20 mm nominal size) i/c finishing the top surface of concrete smooth.
422	Providing and laying in position ready mix plain cement concrete or site batched design mix cement concrete for reinforced cement concrete work, using coarse aggregate and fine aggregate derived from natural sources, portland pozzolana/ordinary portland/portland slag cement, admixture in recommended proportion as per IS 9103 to accelerate/retard setting of concrete, to improve ductility and workability without impairing strength, including pumping of concrete to site of laying, curing, carriage of all leads, but excluding the cost of centering, shuttering, finishing and reinforcements as per direction of engineer in charge, for the following grades of concrete.All works upto plinth level
423	Concrete of M25 grade with minimum cement content of 330 kg/cum
424	Providing and laying in position ready mix plain cement concrete or site batched design mix cement concrete for reinforced cement concrete work, using coarse aggregate and fine aggregate derived from natural sources, portland pozzolana/ordinary portland/portland slag cement, admixture in recommended proportion as per IS 9103 to accelerate/retard setting of concrete, to improve ductility and workability without impairing strength, including pumping of concrete to site of laying, curing, carriage of all leads, but excluding the cost of centering, shuttering, finishing and reinforcements as per direction of engineer in charge, for the following grades of concrete. All works above plinth level upto floor V level
425	Concrete of M25 grade with minimum cement content of 330 kg/cum
426	Reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete up to plinth level.
427	.a) Thermo-Mechanically Treated bars.
428	Centering and shuttering including strutting, propping etc. and removal of form for:
429	a) Foundations, footings, bases of columns, etc. for mass concrete.
430	b) Lintels, beams, plinth beams, girders, bressumers and cantilevers.
431	c) Suspended floors, roofs, landings, balconies and access platform.
432	d) Columns, Pillars, Piers, Abutments, Posts and Struts.
433	e) Stairs, (excluding landings) except spiral-staircases.
434	Brick work with Ist class common burnt clay F.P.S. (non modular) bricksin foundation and plinth in: Cement mortar 1:4 (1 cement : 4 coarse sand)
435	Half brick masonry with Ist class common burnt clay F.P.S. (non modular) bricksin superstructure above plinth level upto floor V level in Cement mortar 1 : 3 (1 cement : 3 coarse sand)
436	Providing wood work in frames of doors, windows, clerestory windows and other frames,wrought framed and fixed in position with hold fast lugs or with dash fastener of required dia and length (hold fast lugs or dash fastener shall be paid for separately :Local best quality Tolhao wood
437	Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick : Local best quality Tolhao wood
438	Providing 40x5 mm flat iron hold fast 40 cm long including fixing to frame with 10mm diameter bolts, nuts and wooden plugs and embedding in cement concrete block 30x10 x 15cm 1:3:6 mix (1 cement : 3 coarse sand : 6 graded stone aggregate 20mm nominal size)
439	Providing and fixing bright finished brass butt hinges with necessary screws etc. complete :75x65x4 mm (heavy type)
440	Providing and fixing bright finished brass towerbolts (barrel type)with necessary screws etc. complete : 250x10 mm
441	150X10mm
442	Providing and fixing bright finished brass handles with screws etc. complete : 125 mm
443	100mm
444	Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete.
445	Fixed to openings /wooden frames with rawl plugs screws etc.
446	Providing and fixing in position collapsible steel shutters with vertical channels 20xl0x2mm and braced with flat iron diagonals 20x5mm size with top and bottom rail of T-iron 40x40x6mm with 40mm dia, steel pulleys complete with bolts, nuts, locking arrangement, stoppers, handles, including applying a priming coat of approved steel primer.
447	Providing and laying rectified Glazed Ceramic floor tiles 300x300 mm or more (thickness to be specified by the manufacturer) of 1st quality conforming to IS :15622 of approved make in all colours, shades, except White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick Cement Mortar 1:4 (1 Cement : 4 Coarse sand) including pointing the joints with white cement and matching pigments etc., complete.
448	Providing and laying Vitrified tiles in different sizes (thickness to be specified by manufacturer) with water absorption less than 0.08% and conforming to I.S. 15622, of approved make, in all colours & shade, in skirting, riser of stepts , over 12mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand), jointing with grey cement slurry @ 3.3kg/sqmincluding grouting the joint with white cement & matching pigments etc. complete.
449	Sizes of Tiles 600x600 mm (double charged)Branded
450	Marble stone flooring with18mm thick marble stone (sample of marble shall be approved by Engineer-in-charge) over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with grey cement slurry including rubbing and polishing complete with : a) Raj Nagar plain
451	Tile work in skirting, risers of steps and dado (upto 2 m height) over 12 mm thick bed of cement mortar 1:3 (1 cement :3 coarse sand) and jointed with grey cement slurry @ 3.3 kg/sqm including pointing in white cement mixed with pigment of matching shade complete.Mable tiles (polished ) Raj Nagar.
452	Extra for prefinished nosing to treads of steps of marble stone.
453	12 mm cement plaster 1:4(1 cement:4 finesand).
454	15 mm cement plaster on rough side of single or half brick wall mix : 1:4( 1 cement : 4 fine sand)
455	Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade
456	New work (two or more coats) over and including priming coat with cement primer:-
457	Finishing walls with water proofing cement paint of required shade : New work ( Two or more coats applied @3.84 kg/10 sqm)
458	Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface :Water thinnable cement primer
459	Providing and applying white cement based putty of average thickness 1mm,of approved brand and manufacturer, over the plastered wall surface to preparethe surface even and smooth complete.
460	Applying priming coat:-With ready mixed pink or Grey primer of approved brand and manufacture on wood work (hard and soft wood)
461	Painting wood work with Deluxe Multi Surface Paint of required shade. Two or more coat applied @0.90 ltr/10 sqm over an under coat of primer applied @0.75 ltr/ 10 sqm of approved brand or manufacture
462	SANITARY FITTINGS COMPLETE
463	Providing and fixing water closet squatting pan (Indian type W.C. pan) with 100 mm Sand Cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required: a).White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests
464	Providing and fixing white vitreous china pedestal type water closet Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required: a).W.C. pan with ISI marked white solid plastic seat and lid
465	Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever required: a).White Vitreous China Wash basin size 630x450 mm with a pair of 15 mm C.P. brass pillar taps
466	Providing and fixing white vitreous china pedestal for wash basin completely recessed at the back for the reception of pipes and fittings.
467	Providing and fixing 8 mm dia C.P. / S.S. Jet with flexible tube upto 1 metre long with S.S. triangular plate to Eureopean type W.C. of quality and make as approved by Engineer - in -charge.
468	Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm and 340x410x265 mm sizes respectively with automatic flushing cistern with standard flush pipe and C.P. brass spreaders with brass unions and G.I clamps complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required : a).One urinal basin with 5 litre white P.V.C. automatic flushing cistern
469	BRASS AND CP BRASS FITTINGS
470	Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931 :a).15 mm nominal bore
471	Providing and fixing brass stop cock of approved quality. a).15 mm diameter
472	Providing and fixing Water Storage Tanks with 400 mm diameter nominal base G.I. overflow tube 25 mm nominal G.I. inlet and 15 mm nominal G.I. outlet tube i/c hoisting a height of 10 m above ground level. a).2000 litres net capacity storage tanks
473	Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6mm thick hard board backing : a) Rectangular shape 453x357 mm
474	Providing and fixing PTMT towel ring trapezoidal shape 215 mm long, 200 mm wide with minimum distances of 37 mm from wall face with concealed fittings arrangement of approved quality and colour, weighing not less than 88 gms.
475	Providing and fixing C.P. brass toilet paper holder
476	Providing and fixing PTMT liquid soap container 109 mm wide, 125 mm high and 112 mm distance from wall of standard shape with bracket of the same materials with snap fittings of approved quality and colour, weighing not less than 105 gms.
477	SH:-PVC Pipes and Fitting
478	Providing and fixing PVC soil ,waste and vent pipes.External a).100mm dia
479	Providing and fixing PVCvent cowl.a).100mm dia
480	Providing and fixing MS holder bat clamps of approved design to 100 mm HCI pipe socket i/c cost of cutting holes and making good the walls etc. including cost of cutting holes and making good the walls etc.
481	Providing and fixing PVC soil ,waste and vent pipes.a).75mm dia
482	Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete.A).Flexible pipe--32 mm dia
483	Supply and installation of water pump Tulu(Texmo) 1HP of approved quality.
484	INTERNAL ELCTRIFICATION INSTALLATION
485	Wiring for light/fan point/Exhaust fan point/ call bell point with 1.5 mm2 PVC insulated copper conductor single core cable inPVC casing & capping with modular type switch, modular plate size,G.I. box and earthing the point with 1.5 mm2 PVC insulated copper conductor single core cable etc. as reqd.
486	1. Group A
487	2. Group B
488	C. Group C
489	Wiring for light point/power plug with 2x4 mm2 PVC insulated copper conductor single core cable in PVC casing & capping along with 1 no. 4mm2 PVC insulated copper conductor single core cable for loop earthing etc. as reqd.
490	INTERNAL ELCTRIFICATION INSTALLATIONWiring for circuit/Sub-main wiring with earth wire with (the following sizes of) PVC insulated conductor single core cable in PVC casing & capping etc.as reqd.
491	(a) 2X1.5mm2+1X1.5mm2 earth wire
492	(b) 2X2.5mm2+1X2 .5mm2 earth wire
493	(c) 2X4mm2+1X4mm2 earth wire
494	(d)2X6mm2+2X6mm2 earth wire
495	Supply and fixing (following modular type switch/socket) on the existing modular plate and switch box i/c connection but excluding modular plate etc as reqd.
496	(a) 5/6 amps switch
497	(b) 15/16 amps switch
498	(c) 3 pin 5/6 amps socket outlet
499	(d) 6 pin 15/16 amps socket outlet
500	S/F stepped type electronic fan regulator on the existing modular plate switch box i/c connection but e/c modular plate etc.

Tender Documents

SR No	FileName	File Description
1	Click here to download tender document	Tender Documents
2	Click here to download tender document	Tender Documents
3	Click here to download tender document	Tender Documents
4	Click here to download tender document	Tender Documents

Also Visit

Tenders

Manipur Tenders

Construction Tenders

Turnkey Projects Tenders

Infrastructure Work Tenders

Disclaimer

We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.

Top

Tender For Up-Gradation Of Infrastructure Development For Emrs Tamenglong, Manipur., Tamenglong-Manipur

Tender Documents

Disclaimer

About Us

Services

Browse Tenders

For Sales Inquiry

Tender For Up-Gradation Of Infrastructure Development For Emrs Tamenglong, Manipur., Tamenglong-Manipur

Tender Documents

Disclaimer

OTP Verification

About Us

Services

Browse Tenders

For Sales Inquiry

Connect With Us