|
| 1 | S&F 12 watt Garden spike light fixture ,high pressure die-cast aluminium, with IK 05 rating & IP 66 protection LED decorative spike luminaire with options of multicolour and mono colour complete all as specified and directed by Engg in charge.Some unique feature:• Multicolour option: cyclic rotation of 8 colors (Red, Green, Blue, Orange, Yellow, Pink, Cool White, and Warm White)• Momentary push button (SS 304, IP67 protected) for color selection or default setting• Monochrome option: available in Warm White, Red, Green, and Blue• Versatile mounting options: ground (spike) or wall (spike-less).Make: Orient Cat Part No (Product Code- POPiNS) or equivalent in Philips, Havells. |
| 2 | S&F Recessed round LED uplighter fixture having Built-in Driver & constructions details as follows: Frame: Stainless Steel Ring with Housing: Die-cast aluminum& Optical Cover Tempered Glass ((10-12mm thick)& must comply to Salt Spray test for 500 hours. Product size not less than : D230 x H128mm. System lumen output ≥2520lm (Approx.) and asystem wattage of ≤36W. The lifetime of ≥50,000 burning hours @ ta 35°C, Range of operating temperature should be from -40℃ to +50℃.Beam optics 20° The luminaire should have a color temperature of 3000K and CRI > 80. The luminaire shall meet Dust proof and water resistance IP67 & IK10 potection & voltage range protection from 110V-240V with Min. 2.0KV Surge protection. Power factor of ≥ 0.9. Power Connection :: single flying cable 30cm+/-5cm and IP67 water-proof terminal connector, PG13.5 gland, H05RN-F 3*1mm2. fixure mustbe in Compliance to IEC 60598-1, IS 10322 (Part5/Sec1) & should have Certification :: CB/EMC/CE/CCC complete all as specified and directed.Make: Philips Cat Part No BBP344 G2 or equivalent in SSK/ Keselec/ Make specified in PS. |
| 3 | S&F LED floodlight fixture with Pressure Die-cast aluminium housing high quality integrated LED Luminaire. FieldStar LED Floodlight fixture, rated wattage of 70W, system efficacy>120lm/watt, system lumen: 8400lm, The luminaire should be of Class B Serviceability. Luminaire comes with toughend glass cover with LED lens for symmetric WB photometry, The LED used in the luminaire shall be SMD type only . IP66 & IK07, SDCM<5, THD<10%, CRI>70 & CCT: 3000K, Protection Class I, Operating temp: +0to 50 degree C, Ambient temp.: 35Deg. C, Operating voltage of 140-270V (AC) at 50Hz, LED Life(L70B50): 50,000hrs, Inbuilt surge protection of 4KV & External SPD rating of 10KV, Power factor(pf)>0.95, LED Driver efficacy>85%, complied with IEC 60598, Driver meets IEC61347 & BIS. The luminaire should have Integrated optics to provide a high quality glare free lighting system, Light fixture with HV/LV cut-off options complete all as specified and directed.Make: Philips Cat Part No BVP175 LED110 WW 100W FG GR PSU or equivalent in SSK/ Keselec/ Make specified in PS. |
| 4 | S&F LED Up-Down LighterSpear Up-Downa 15 W architectural luminaire designed for both aesthetic and functional wall lighting applications. The housing is constructed from high-pressure die-cast aluminium with a toughened glass diffuser, ensuring durability and long service life. The fixture offers an ingress protection rating of IP65 and an impact resistance of IK08, making it suitable for outdoor environments. It features separate optical and control gear compartments for ease of serviceability. The luminaire is finished in an elegant graphite grey color. Equipped with a COB LED light source of 3000K ± 500K color temperature and CRI ≥80 (initial), it provides warm, uniform illumination. Dimensions: 100 mm (Dia) × 280 mm (Height) complete all as specified and directed.Make:- Orient,Philips,Havells. |
| 5 | S&F Outdoor LED Bollard light fixture having Built-in-Driver & construction details as follows: Housing: Metal & Aluminium & clear optical cover. Product size not less than: 815x140x105 mm.System lumen output (840lm) and a system wattage of 12 watt, Colour (Anthracite).The luminaire should have a color temperature of 3000K.The luminaire shall meet Dust proof and water resistance IP65 & IK08 potection & voltage range protection from 140V-360V with inbuilt 2.5 KV SPD Surge protection. Power factor>0.8.fixure mustbe in Compliance to IEC 60598-1, IS 10322 (Part5/Sec1) complete all as specified and directed.Make: Philips Cat Part No 582089 philips VIBE UNIQ Cone 12W or equivalent in SSK/ Keselec/ Make specified in PS. |
| 6 | S&F LED UNDER WATER lights having stainless steel housing, Toughened glass, High Power LED with lens of capcity 9 watt complete all as specified and directed by Engr-in-charge. Make: Lusture cat Part No Li 74005-9W or equivalent in Orient,Havells. |
| 7 | M&L for 2.5 sqmm 3 core copper cable for bollard lights, spike lights, LED uplighter and LED flood lights to be layed under ground or on the floor whichever required complete all as specified and directed.Make:- RR Kabel, Havells, Polycab |
| 8 | M&L for submain wiring alongwith earth wire with 2 run of 1.5 Sqmm (Main Cable and neutral) and one run of 1.5 Sqmm as earth wireof FRLSH PVC insulated copper conductor, single core cable drawn throughPVC conduit of25 mm dia bore with all fittings accessories complete all as specified and directed.Make : RR Kabel,Havells,Polycab.Note: Three runs of wire and one run of conduit will be measured as one unit of length |
| 9 | S&F Sheet metal enclosure for DB\"s when MCB to be used, SPN double door 240 volt, 4 way with 200 amps rated bus bar complete all as specified and directed. Make: Legrand cat part No 507610 or equivalent in Scheider, L&T. |
| 10 | S&F MCBs, SP 6 to 32 Amps type \"B\" or \"C\" as per site rquirement, 10 KA rupturing capacity, IS-8828 marked, and fixing in DBs (DBs Catered separately in this schedule) (Make of the MCB should be the same as that of DB) complete all as specified and directed. |
| 11 | All as per item No 10.00 above but MCB DP 32 Amps Type B OR Type C as per site requirement complete all as specified and directed. |
| 12 | S&F Gravity Feed type Gaseous Chlorinator complete set as per manufacturer\"s instruction of capacity 2.0 to 5.0 Kg/hr for water supply installation at NSB-I. The Chlorinator complete set includes PVC piping arrangement including fixing accessories from Chlorinator set to under ground sump to make it fully functional complete all as specified and directed by Engineer-in-Charge. Note : (i) The complete materials and labour cost is deemed to be included in this rate. Necessary exavation cost is included in this rate. Nothing extra shall be paid on this account. (ii) The chlorinator to be fixed on wall. Necessary fixing materials and labour charges is deemed to be included in this rate. Nothing extra shall be paid on this account. |
| 13 | S&F Verticle Submersible pumpsets in CI casing SS impeller, 60mtr head, stainless steel shaft seal fitted coupled with an electric motor of cap 5 Hp/3.7 kW, 2900 rpm, three phase, having 3 stage, IP68 class B insulation, Outlet of pump be 80mm suitable for borewell complete all as specified and directed by Engineer-in-Charge. |
| 14 | S&F Flat Submersible copper cable of size 2.5 sqmm, 3 core, suitable for 5 HP verticle submersible pumpset including all charges to make pump fully electrically operational condition complete all as specified and directed by Engineer-in-Charge. |
| 15 | S&F Submersible pump DOL starter suitable for 5 HP submersible pump with all connected accessories complete all as specified and directed by Engineer-in-Charge. |
| 16 | S&F Chlorine gas Cylinder suitable to store minimum 15 kgs of chlorine gas with connected fixing accessories complete all as as per manufacturer\"s instruction & directed by Engineer-in-Charge. |
| 17 | S&F Chlorine gas suitable for treatement of water all as specified and directed by Engineer-in-Charge. Notes. (i) Transportation charges for collection of empty gas cylinder from site and after filling of gas the same return to the site is deemed to be included in this rate. Nothing extra paid on this account. Note: (a) Srl Item No 01.00 to 08.00, 12.00 & 13.00 of BOQ are major items for the subject tender and material in respect of these items shall be procured within one month after placing of work order and produced before Engg in Charge alongwith original purchase vouchers as per direction of Garrison Engineer and shall obtain a certificate from Engg in charge that material in respect of above mentioned items have been submitted in the office of Engg in charge in their safe custody.(b) Materials in respect of Freakishly low declared items if any at the time of acceptance of contract shall be procured within one month after placing of work order and submit the same in the office of Engg in charge alongwith original purchase vouchers in their safe custody and shall obtain a certificate from Engg in charge. |
