|
| 1 | Excavation in trenches, nexc 1.5m wide and n exc 1.5m in depth for fdn,etc.n. exc 10sqm on plan and getting out in soft/loose soil. |
| 2 | M&L for PCC 1:4:8 type C-2 (using 40 mm grade stone agg) as in foundation filling and mass concrete complete all as specifiedand directed. |
| 3 | M&L for PCC 1:3:6 type D-2 (using 40 mm grade stone agg) as in foundation filling and mass concrete complete all as specifiedand directed. |
| 4 | M&L Brickwork with fly ash bricks, straight or curved on plan exc 6 m mean radius, built in CM 1:6 ,complete all as specified and directed |
| 5 | Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter for fair finished surface ,complete all as specified and directed |
| 6 | M&L for PCC 1:3:6 type C-1 (using 20 mm graded stone agg) as in lintels up to 1.5 m clear span cills, copings, bed plate, plinth courses, roof kerbs or mud stops rounded or chamfered on edges including necessary form work complete all as specifiedand directed. |
| 7 | S&Ffor Mild steelsquare/rectangular Hollow sections/ flats in posts and struts in fencing including cutting tops to shape as directed drilling holes notching for wire etc flat iron fillets (for securing wire mesh etc) incl all necessary drilling, blocking or reveting etc ,complete all as specified and directed |
| 8 | S&F 4 mm dia PVC Coated chain link Fencing of size 150x100 mm mesh, made up into matresses or cages, lapped, wired and laid in position, including closing after filling ,complete all as specified and directed |
| 9 | S&F mild screw bolts(machine made) with hexagonal or square heads at one end and scraved the other to be fitted with washers and one hexagonal or square nut n. exc. 5 cm long and dia 5 to 10 mm |
| 10 | M&L Mild steel bars 10mm dia and over, cut to length, bent to shape required, includingcranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clip |
| 11 | M&L for rendering 10 mm thick in CM 1:4on fair faces of brick work or concrete surfaces and finished even and smooth (without using extracement). |
| 12 | M&L for preparation of newly plastered surfaces and applying two coats of cement basepaint over a coat of primer etc complete all as specified and directed. |
| 13 | M&L for applying two coat of synthetic enamel paint over a coat of red oxide primer on new sarface on steel over 10cm girth or width including preparation of surface complete all as specified and directed. |
| 14 | M&L for preparation for steel surfaces and applying two coats of synthetic enamel paint over a one coat of red oxide incl preparation of surfaces nexc 10cm width or girth,complete all as specified and directed. |
| 15 | S&F for Galvanised, 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 100 mm spacings all as specified fixed in repair,complete all as specified and directed. |
| 16 | Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm,complete all as specified and directed. |
| 17 | Removing excavated material n exc. 50 m and depositing where directed at a level n exc. 1.5 m above the starting point,complete all as specified and directed. |
| 18 | M&L RCC (design mix) M-30 in Foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc; basement slabs, under-reamed piles and mass concrete,complete all as specified and directed. |
| 19 | M&L for RCC,M-30 Design Mix (using 20mm graded aggregate) as in Columns,pillars,piers,posts and struts etc ,complete all as specified and directed. |
| 20 | S&F Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips,complete all as specified and directed. |
| 21 | S&F Mild steel TMT bars 5 mm dia and over, cut to length, spacers and binders and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips,complete all as specified and directed. |
| 22 | S&F for Framed work such as grills, gratings etc., with ends of bars shouldered and/or riveted, or forget into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar workhung as gates, including pintle hinges, stops, hand-made sliding bolts, etc.conforming to Fe 410-0 or Fe 310-0 complete all as specified and as directed. |
| 23 | M&L moorum filling under floors or in foundations including wateringand consolidation complete all as specified and directed. |
| 24 | Material and labour for XLPE insulated,LT armoured electric cable with aluminium standed conductor 1100 volts grade,cross-sectional area 6 sqmm ,2 core laid in trenches/pipes/ducts/wall/boarings with necessary cable lugs and glands,nuts,bolts and washers,saddeling on wall properly etc and testingcomplete all as specified and directed. |
| 25 | Supply and fix20 watts LED post top lantern made in cast aluminium spigot housing with decorative opal polycarbonate diffser and IP65 protectionand providing suitable fixing arrangements such as necessary GI pipe at post top/pillar and civil work, lugs,glands,nuts,bolts and washerscomplete all as specified and directed. |
| 26 | Boaring holes horizontally under road without damaging the surface of road (minimum 1.0 Mtr bellow the road surface) with the help of GI tubing of any dia not exc 80mm dia for passing of UG cable all as specified and as directed. |
| 27 | Material and labour for PCC 1:2:4 type B1 using (20 mm graded stone aggregate) for making good cutting portioncoping of pole and filling of foundation etc including necessary use and waste of form work complete all as specified and directed.Note:- Top surface of pole coping to making smooth finishing and white washingmade by the contractor costdeemed intoquoted rete only. |
| 28 | Supply and filling in and speading unwashed river sand for cushioning and covering the under ground cables in trenches and punning to provide required cover complete all as specified in SSR Part-I and as directed. |
| 29 | M & L for brick sub class \"B\" 250mm x 115mm x 0.75mm and laid in trenches as in protection of UG cablecomplete all as specified and directed. |
| 30 | Material & labour for GI pipe 50 mm \"light grade\" laid in trenches floors/on , pole/road for cable protection with all fittings complete all as specified and directed.Make:- Jindal/Tata/swastik/BST |
| 31 | Taking down carefully copper/aluminium point wiring (light,fan,bell, socket or power)complete,including fixtures and fittings such as switches, ceiling roses, holders,regulators, sockets, tube light fittings i.e removingmaterials to store forkeeping in safe custody or for taking credit (credit for above items should be made for conditions separately )and including making good the disturbed surfaces to match with existing surface and colour shade with proper puttyfor smooth finishing without undulations complete all as specified and directed. |
| 32 | Material and labour for cutting chasing,pinning ofbrick/ stone/concrete wallat any height wall cutting and chases for concealedwiring for 20/25 mm PVC conduit dia pipe,water tubing,etc and making good to facings where required and pointing in cement motor 1:3 to ends or edges of landigs,wall surfaces etc,cutting not exc 10 cm girth and including making good the disturbed surfaces to match with existing surface and colour shade with proper putty for smooth finishing with existing wall complete all as specified and directed |
| 33 | M&L for point wiring using approved colour coding incl providing circuit wiring with 1.5 sqmm PVC insulated, FRLSH type, ISI marked,conf to IS-694/1990 unsheathed,multistranded,single core, coppercable 1100 volts grade cablesdrawn throughPVCConduit/Casing and caping 20/25 mm dia medium grade(MMS)as per site requirement at any height and all accessoriesare concealedinwalls / roofs / floors / ceiling etc. flush mounting modular MS boxmade out of 1.60mm thick suitable for modular top cover and framefor fixing of modular switches,sockets,fan regulators, blank plate etc andincluding 1.5 Sqmm PVC insulated multistranded FRLSH type unsheathed(Green colour),single core cable with coppercable as earth continuity conductor andconnecting to common earth dolly and including making good the disturbed surfaces to match with existing surface and colour shade with necessary putty for smooth finishing complete all as specified and directedfor One light point controlled by one 10 Amps switch one way. |
| 34 | All as per item no. 33 but forOne light point controlled by two 2 way switches/bed switch point. |
| 35 | Supply & fixing modular type switch 10 Amps, single pole,1way,1 module,240V,AC,ISI Markedcomplete all as specified and directed. |
| 36 | Supply & fixing modular type switch 10 Amps ,2way,single pole,1 module,240V,AC,ISI Markedcomplete all as specified and directed. |
| 37 | Supply & fixing red color lighting indication lamp switch, single pole,240volts,AC,50 Hz suitable for 1 moduleISI Marked complete all as specified and directed. |
| 38 | Supply & fix angle lamp holder latest model, insulated PVC out side body and brass inside holder with back plate for batten fittings/bulbscomplete all asspecified and directed. |
| 39 | Supply & fix ceiling rose, 3 terminal ,PVC/polycarbonate body ISI marked, complete all as specified and directed. |
| 40 | Taking down/dismantling old unsv light fitting from existing location and Supply & fixindoor type 20 watt LED prideplus triyca( three color CCT change)batten fitting 6500K in WW&NW,lumiline trendwhite/warm lighting, surface mounting generalpurpose ultra- slim economicalLED battens in extruded PC housing and square shapeddiffuser with wide range of wattage to suit variety ofapplications & areas, easy to install, efficency 100lm/w , pre-wired, driver,colour ed caps etc and necessary connections with LED fitting to ceiling rose terminal complete all as specified and directed. |
| 41 | Taking down/dismantling old unsv light fitting from existing location and Supply & fixindoor type 20 watt LED light batten fitting (6500K in WW&NW) lumiline trendwhite/warm lighting, surface mounting generalpurpose ultra- slim economicalLED battens in extruded PC housing and square shapeddiffuser with wide range of wattage to suit variety ofapplications & areas, easy to install, efficency 100lm/w , pre-wired, driver,colour ed caps etc and necessary connections with LED fitting to ceiling rose terminal complete all as specified and directed.. |
| 42 | Taking down old unsv light fitting from existing location and Supply & fix20 watt LED light fitting pride essential smart brightwhite/bright lighting, high quality materials andslim intergrated design,extruded aluminium housing enhances safety, PC diffuser, reliable and robust housing structure ,maximize the endurance over the life time, easy to install, efficency 125 lm/w(6500K)and including providing coloured end caps, pre-wired,with necessary hanging chains,holding holders,screws etc as required at siteand necessary connections with LED fitting to ceiling rose terminal complete all as specified and directed. |
| 43 | Taking down old unsv light fitting from existing location and Supply & fix40 watt LED light fitting pride essential bright linea white lighting, high quality materials andslim intergrated design,extruded aluminium housing enhances safety, PC diffuser, reliable and robust housing structure ,maximize the endurance over the life time, easy to install, efficency 125 lm/w,6500Kand including providing coloured end caps, pre-wired, and PVC/Wooden round/square block -02 Nos with necessary hanging chain as required at siteand necessary connectionswith LED fitting to ceiling rose terminal complete all as specified and directed. |
| 44 | Taking down old unsv light fitting from existing location and Supplyand fixedLED batten complete slim fitting 10 watts,6500K integrated design, easy to install,PC diffuser and robust housing, high quality materials,pre-wired including providing PVC round/PVC square blocks-02 Nos and connected with LED fitting to ceiling rosecomplete all as specified and directed. |
| 45 | Taking down old unsv light fitting from existing location and Supply and fixing LED 20 watt,6500K, Pride plusinverter batten,decorative type light fitting white lighting, with square profile and polycarbonate channel,lithium lon battery with charging time 8 hours to 10hours and back up time upto 4 hours high quality materials and design,extruded aluminium housing enhances safety,high quality PC diffuser, easy to install, efficency 125 lm/wand including providingpre-wired, and PVC/Wooden round or square blocks -02 Nosand connected with LED fitting to ceiling rosecomplete all as specified and directed. |
| 46 | Taking down old unsv light fitting from existing location and Supply and fixing 20 watt LED batten nicolaus glamtubeintegrated design, easy to install,efficency,125 lm/w,6500K, 2/3-in-1 colour change ,PC diffuser and robust housing, high quality materials,pre-wired including providing PVC round/PVC square blocks-02 Nos and connected with LED fitting to ceiling rose terminal a complete all as specified and directed. |
| 47 | Taking down old unsv light fitting from existing location and Supply and fixing 36 wattsLED supernovalight fitting white/warm/cool white high wattage,6500K completeLED lighting with high lumen output,environmental friendly,energy efficient, integrated design, easy to install,PC diffuser and robust housing, high quality materials,pre-wired including providing PVC round/PVC square blocks-02 Nos and connected with LED fitting to ceiling rose terminalcomplete all as specified and directed. |
| 48 | Taking down old unsv light fitting from existing location and Supply and fixing 20 watts LEDAustra ARK Batten, 3-in-1 smart light fitting,6500K,contemporary design of mirror light complete decorative LED lighting with extruded polycarbonate, environmentalfriendly, energy efficient, easy to install,PC diffuser, high quality materials,pre-wired including providing PVC round/PVC square blocks-02 Nos and connected with LED fitting to ceiling rose terminalcomplete all as specified and directed.M |
| 49 | Taking down old unsv light fitting from existing location and Supply and fixing decorativeSana wall lightglobe type,high quality ploycarbonate materials suitable for 10 to 15 watt LED lamp white/warm as per requirement ,B22,220 Volts ACwith high efficiency, soft glare free light complete with LED lamp,holder suitable for fixing onwall surface including providing5 mm thick hylem sheet or plastic 5 mm sheet suitable for light fitting,screws,nuts,small bolts and washers and connected with LED fitting to ceiling rose terminalcomplete all as specified and directed. |
| 50 | Taking down old unsv light fitting from existing location and Supply and fixing decorative LED 12-15 watt decorativewall lightglobe type,high quality ploycarbonate materials suitable for 15 watt LED lamp white/warm as per requirement ,B22,220 Volts ACwith high efficiency, soft glare free light complete with LED lamp,holder suitable for wall surface and connected with LED fitting to ceiling rose terminalcomplete all as specified and directed. |
| 51 | Taking down old unsv light fitting from existing location and Supply and fixing 6 wattLED panel type slim,(warm/White or 3 in-1 colour) compact,aliminium die cast edge lit panel recess mounted square/round type light fitting with LED opal diffuser (lamp/strip) and separate electronic LED driver and connected with LED fitting to ceiling rose terminalcomplete all as specified. |
| 52 | Taking down old unsv light fitting from existing location and Supply and fixing 12 wattLED panel type slim,,(warm/White or 3 in-1 colour) compact,aliminium die cast edge lit panel recess mounted square/round type light fitting with LED opal diffuser (lamp/strip) and separate electronic LED driver and connected with LED fitting to ceiling rose terminalcomplete all as specified |
| 53 | Taking down old unsv light fitting from existing location and Supply and fixing 15 wattLED panel type slim, ,(warm/White or 3 in-1 colour)compact,aliminium die cast edge lit panel recess mounted square/round type light fitting with LED opal diffuser (lamp/strip) and separate electronic LED driver and connected with LED fitting to ceiling rose terminalcomplete all as specified |
| 54 | Taking down old unsv light fitting from existing location and Supply and, fixed in repairs flexible neo LED strips 24 watt 6000k ,240Volts ,standard length ,single phase with uniform light distribution and long lasting adhesive for perfect cove light,colour as per required andincluding all connected accessories suitable for proper fixing as per site requirementcomplete all as specified and directed. |
| 55 | Taking down old unsv light fitting from existing location and Supply and fixedflexible LED strips trica AC LED tricolor strip light, 20/24 watt 6000k ,240Volts,IP-65 standard length ,single phase with uniform light distribution and long lasting adhesive for perfect cove light,colour as per required andincluding all connected accessories suitable for proper fixing on pole,wall surface,steel structures etc as per site requirementcomplete all as specified and directed. |
| 56 | Taking down old unsv light fitting from existing location and Supply and fixed aesthetically designed LED flat panel for surface mounting which provides soft-light and glare free symmetrically illumination 2\"x2\" LED 36 Watt(square or round shape) light fitting and including providing internally prewired,LED driver,connector and also can besuspended with provided kit,nut,bolts and washers as per site requirement and including connecting up with ceiling rose to fitting complete all as specified and directed.. |
| 57 | Taking down old unsv light fitting from existing location and Supply and fixed aesthetically designed LED flat panel for surface mounting which provides soft-light and glare free symmetrically illumination 2\"x2\" LED 40/42 Watt(square or round shape) light fitting and including providing internally prewired,LED driver,connector and also can besuspended with provided kit,nut,bolts and washers (square or round shape) as per site requirement and including connecting up with ceiling rose to fittingcomplete all as specified and directed. |
| 58 | Taking down old unsv light fitting from existing location and Supply and fixed in repairs recess mounting 2\"x2\" LED 40/42 Watt light fitting slimmest 9 mm thin in class LED ceiling panel with best in class aesthetick white powder coated frame blended seamlessly with ceiling layout suitable for 600X600mm mudular ceiling grid and also can besuspended with provided kit (square or round shape) and including connecting up with ceiling rose to fittingcomplete all as specified and directed complete all as specified and directed. |
| 59 | Taking down old unsv light fitting from existing location and Supply and fix LED wall mounted secruity light fitting of capacity 20 Watt LED street light fitting in aluminium PDC housing, toughened glass cover with IP65/66 protectionwith 6 KV inbuilt surge protector and cable connection from ceiling rose/looping box/switch board/DBs to light fitting and testingcomplete all as specified and directed. |
| 60 | Taking down old unsv light fitting from existing location and Supply and fixed in repairs LEDbldg secruity light fitting of capacity 35 Watt LED street light fitting in aluminium PDC housing, toughened glass cover with IP65 protectionwith 4/5/6 KV inbuilt surge protector and cable connection from ceiling rose/looping box/switch board/DBs to light fitting and testingcomplete all as specified and directed. |
| 61 | Taking down old unsv light fitting from existing location and Supply and fixed in repairs LEDbldg secruity light fitting of capacity 60 Watt LED street light fitting in aluminium PDC housing, toughened glass cover with IP65 protectionwithinbuilt surge protector and cable connection from ceiling rose/looping box/switch board/DBs to light fitting and testing complete all as specified and directed. |
| 62 | Taking down old unsv light fitting from existing location and Supply and fixed in repairs LEDbldg secruity light fitting of capacity 90 Watt LED street light fitting in aluminium PDC housing, toughened glass cover with IP65 protectionwithinbuilt surge protector and cable connection from ceiling rose/looping box/switch board/DBs to light fitting complete all as specified and directed. |
| 63 | Supply and fix GI bracket pipe suitable for above light fitting size 40 to 63 mm dia medium grade of 1.2 mtr long bent to shape suitable degree of bending as per site requirementwith hot or coldbending method of process for making the one end of GI pipe bracket suitable for fixing of any type street light fitting and shall be fixedonwall surfaces and including providingsuitable fabricate galvanised flat ironclamps of 30X6 mm thick-02 Nossuitable for fixing at any place/height with hole fastners,nuts,bolts & washers including grouting on wall etc and including removing of old unserviceable item complete all as specified and directed. |
| 64 | S & F Energy efficient and energy saving new generation 10 watts LED bulk head light fitting IP-65 luminaire with opel diffuser pre-wired ofluminaires including LED light driver and connected with LED fitting to ceiling rose terminaland incl removing old unserviceable fitting complete all as specified and directed. |
| 65 | Supply and fixed energy saving,environmental friendly,long life asethetic consistancy in multi purpose application with SMD LEDs aslight source with driver included,suitable for highlighting architural features or area lighting, light fitting of capacity 70 Watt LED, light fitting in aluminium PDC housing, toughened glass cover with IP65 protectionwith 4/5/10 KV inbuilt surge protector and cable connection from looping box to light fitting and testing and including removing of old unserviceable item complete all as specified and directed. |
| 66 | Supply and fixed energy saving,environmental friendly,long life asethetic consistancy in multi purpose application with SMD LEDs aslight source with driver included,suitable for highlighting architural features or area lighting, light fitting of capacity 100 Watt LED, light fitting in aluminium PDC housing, toughened glass cover with IP65 protectionwith 4/5/10 KV inbuilt surge protector and cable connection from looping box to light fitting and testing and including removing of old unserviceable item complete all as specified and directed. |
| 67 | Supply and fixed energy saving,environmental friendly,long life asethetic consistancy in multi purpose application with SMD LEDs aslight source with driver included,suitable for highlighting architural features or area lighting, light fitting of capacity 120 Watt LED, light fitting in aluminium PDC housing, toughened glass cover with IP65 protectionwith 4/5/10 KV inbuilt surge protector and cable connection from looping box to light fitting and testing and including removing of old unserviceable item complete all as specified and directed. |
| 68 | Supply and fixed energy saving,environmental friendly,long life asethetic consistancy in multi purpose application with SMD LEDs aslight source with driver included,suitable for highlighting architural features or area lighting, light fitting of capacity 170 Watt LED, light fitting in aluminium PDC housing, toughened glass cover with IP65 protectionwith 4/5/10 KV inbuilt surge protector and cable connection from looping box to light fitting and testing and including removing of old unserviceable item complete all as specified and directed. |
| 69 | Supply & fixingand sheet metal enclosurewith acrylic door type, double door ,415 volts AC,VTPNDB, 4 way,8+12 modules, flush mounting with 200amps copper busbar, 2 neutral/earth bars links and MCCB incomer,and MCB SPN/SP/TPNas outgoing and complete forIP43&54 DBs protection and includingremoving old unserviceable DBs and incl making good the disturbed surfaces to match with existing surface and colour shade complete all as specified and as directed. |
| 70 | Supply & fixingand sheet metal enclosurewith acrylic door type, double door ,415 volts AC,TPNDB, 4 way,8+12 modules, flush mounting with 200amps copper busbar, 2 neutral/earth bars links and MCB incomer,and MCB SPN/SP/TPNas outgoing and complete forIP43&54 DBs protection and includingremoving old unserviceable DBs and incl making good the disturbed surfaces to match with existing surface and colour shade complete all as specified and as directed. |
| 71 | Supply & fixing andsheet metal enclosure, with acrylic door type, double door, 240 volts AC,SPN,DB, 8 way, flush mounting with 100amps copper busbar,neutral bar,earth bar links and MCB incomer MCB SPN/DP and MCB SP as outgoingforIP 43& IP54 DBs protection nd includingremoving old unserviceable DBs and making good the disturbed surfaces to match with existing surface and colour shade acomplete all as specified and as directed. |
| 72 | Supply & fix andsheet metal enclosure, with acrylic type double door, 240 volts AC,SPN,DB, 4 way, flush mounting with 100amps copper busbar,neutral bar,earth bar and MCB incomer,MCB SPN/DP,and MCB SP as outgoingforIP 43& IP54 DBs protection nd includingremoving old unserviceable DBs making good the disturbed surfaces to match with existing surface and colour shade complete all as specified and as directed. |
| 73 | Supply & fixMCB SP 6 to 32 Amps 10 KA,\"C\" series,AC,240Volts,50Hz , ISI marked and including removing old unsv items complete all as specified and directed. |
| 74 | Supply & fix and MCB SPN 32 to40 Amps 10 KA,\"C\" series,AC,240Volts,50Hz, ISI marked and including removing old unsv items complete all as specified and directed.Make:- Legrand /Havells or equivalent in Hagar/Schneider as approved by GE. |
| 75 | Supply & fix and MCB SPN 40 to63 Amps 10 KA,\"C\" series,AC,240Volts,50Hz, ISI marked and including removing old unsv items complete all as specified and directed.. |
| 76 | Supply & fix and MCB TPN 4063 Amps 10 KA,\"C\" series,AC,415Volts,50Hz, ISI marked and including removing old unsv items complete all as specified and directed. |
| 77 | M & L for sub main wiring complete with 2 run of 6 sqmm single core copper conductor (ISI marked)cable1100 volts grade, ISI marked,FRLSH type (conforming to IS-694/1990 as amended) PVC insulated, unsheathed,flexible,multi strandedcolour coded cables drawn through and including rigidPVC conduit/PVC casing capingin concealed/surface as per site requirement, ISI marked medium grade(MMS) with all connected accessories such asBend,Tee,Elbow,Short peices etc concealed in wall/roofs/floorsand including one run of 4 sqmm single core copper conductor cable flexible, PVC insulated, unsheathed, multistranded, 1100 volts grade, ISI marked FRLSH type as earth continuity conductor connected to common earth dolly and including removing old unsv sub main wiring andmaking good the disturbed surfaces to match with existing surface and colour shade and complete all as specified and directed.Note : - Two run of 6 sqmm single core copper conductor cable and one run of 6 sqmm single core copper conductor cable as earth continuity and one run of PVC conduit shall be measured as one unit. |
| 78 | All as per item No 77but for2 run x 4 sqmm+1 run earth wire complete all as specified and directed. |
| 79 | All as per item No 77but for2 run x 2.5 sqmm+1 run earth wire complete all as specified and directed. |
| 80 | All as per item No 77but for 2 run x 1.5 sqmm+1 run earth wire complete all as specified and directed. |
| 81 | Supply and fixsuitable for flush mounting sheet steel enclosure metal clad plug and socket including MCB SP 20Amps, 10KA \"C \"series, 230 Volts,50Hzsuitable for AC\"s/Geysers complete all as specified and directed. |
| 82 | Supply and fixMCCB,125 Amps,4 pole,415 Volts , 16/18KA thermal magnetic type with necessary lugs,thimbles, nuts bolts and washersand including removing old unserviceable itemcomplete all as specified and as directed. |
| 83 | Supply and fix20 watts LED post top lantern made in cast aluminium spigot housing with decorative opal polycarbonate diffser and IP-65 protectionand providing suitable fixing arrangements such as necessary GI pipe at post top/pillar and civil work, lugs,glands,nuts,bolts and washers andincluding removing old unserviceable itemcomplete all as specified and directed. |
| 84 | Supply and fix40 watts LED post top lantern made in cast aluminium spigot housing with decorative opal polycarbonate diffser and IP-65 protectionand providing suitable fixing arrangements such as necessary GI pipe at post top/pillar and civil work, lugs,glands,nuts,bolts and washers andincluding removing old unserviceable itemcomplete all as specified and directed. |
| 85 | Material & labour for GI pipe 50 mm \"light grade\" laid in trenches floors/on , pole/road for cable protection with all fittings complete all as specified and directed. |
| 86 | Supplyand fix copper conductor cable, PVC insulated, sheathed,flexible, multistranded,ISI marked, 1100 volts grade 3 core ;1.0 sqmm and including electric connection through PVC conduit with proper saddeling/casing caping on surface or uder groundand including removing old unserviceable item complete all as specified and directed. |
| 87 | Supplyand fix copper conductor cable, PVC insulated, sheathed,flexible, multistranded,ISI marked, 1100 volts grade 3 core ;2.5 sqmm and including electric connection through PVC conduit with proper saddeling/casing caping on surface or uder groundand including removing old unserviceable item complete all as specified and directed. |
| 88 | Supply and fixed in repairsmodular switch 1 way,10Amps,1module,240V, ISI Marked, and suitable for existing type as per site requirement and including removing old usnv items complete all as specified and directed. |
| 89 | Supply and fixed in repairs , modular switch 1 way,16Amps,1module,240V, ISI Marked and suitable for existing type as per site requirement andincluding removing old usnv items complete all as specified and directed. |
| 90 | Supply and fixed in repairs , modular type socket shuttered type 6/10 Amps, 2/3 Pin combined 2 module,240V,ACISI Marked and suitable for existing type as per site requirement and including removing old usnv items complete all as specified and directed. |
| 91 | Supply and fixed in repairs modular type socket 16/20 Amps, 6 Pin combined shuttered socket 2 module with light indication ,240V,ACISI Markedand suitable for existing type as per site requirement and including removing old usnv items complete all as specified and directed. |
| 92 | Supply and fixed in repairs modular switch 2 way,10Amps,1module,240V, ISI Marked and suitable for existing type as per site requirementand including removing old usnv items complete all as specified and directed. |
| 93 | Supply and fixed in repairs ,modular type step fan speed regulator 100/120 W, 2 module,230volts,AC, 360 degree rotationISI Markedand suitable for existing type as per site requirement and including removing old usnv items complete all as specified and directed. |
| 94 | Supply and fixed in repairsmodular bell push 1 way,10Amps,1module,240V, ISI Marked and suitable for existing type as per site requirement and including removing old usnv items complete all as specified and directed. |
| 95 | Supply and fixed in repairs ,modular metal flush box 1/2 module, ISI marked,and suitable for existing type as per site requirement and including removing old unserviceable item from existing loaction complete all as specified and as directed.. |
| 96 | Supply and fixed in repairsmodular metal flush box 3 module ,ISI marked, and suitable for existing type as per site requirement and including removing old unserviceable item from existing loaction complete all as specified and as directed. |
| 97 | Supply and fixed in repairs, modular metal flush box 4/5 module, ISI marked,and suitable for existing type as per site requirement and including removing old unserviceable item from existing loaction complete all as specified and as directed. |
| 98 | Supply and fixed in repairsmodular metal flush box 6 to 18 module,1.60mm thikness ,ISI marked and suitable for existing type as per site requirement and including removing old unserviceable item from existing loaction complete all as specified and as directed. |
| 99 | Supply and fixed in repairs,modular white cover plate with frame 1 module,ISI marked and suitable for existing type as per site requirement and incl screws,washears etc and including removing old unserviceable item from existing loaction complete all as specified and as directed. |
| 100 | Supply and fixed in repairs, modular white cover plate with frame 2 module,ISI marked and suitable for existing type as per site requirement and incl screws,washears etc and including removing old unserviceable item from existing loaction complete all as specified and as directed. |
| 101 | Supply and fixed in repairsmodular white cover plate with frame 3 module ,ISI marked and suitable for existing type as per site requirement and incl screws,washears etc and including removing old unserviceable item from existing loaction complete all as specified and as directed. |
| 102 | Supply and fixed in repairs modular white cover plate with frame 4/5 module ,ISI marked as per site rqmnt andincl screws,washears etc and including removing old unserviceable item from existing loaction complete all as specified and as directed. |
| 103 | Supply and fixed in repairsmodular white cover plate with frame 6 module incl ,ISI marked and suitable for existing type as per site requirement and screws,washears etc and including removing old unserviceable item from existing loaction complete all as specified and as directed. |
| 104 | Supply and fixed in repairs, modular white cover plate with frame 8 to 18 module ,ISI marked and suitable for existing type as per site requirement and incl screws,washears etc and including removing old unserviceable item from existing loaction complete all as specified and as directed. |
