|
| 1 | Excavating over areas, n exc 1.5m deep and getting out in any type of soil, complete all as specified and as directed. |
| 2 | Returning filling in including spreading levelling watering and well ramming in layers not exc 25cm complete all as specified and as directed. |
| 3 | Removing excavated soil to a distanceexc 50m and nexc1.50 km out side defence land complete all as specified and as directed. |
| 4 | Demolition, Cement concrete (unreinforced) of any description and in any position not otherwise specifically provided for complete all as specified and as directed. |
| 5 | Demolition of Bricks or stone masonry built in cement mortar complete all as specified and as directed. |
| 6 | Taking down cement plaster on brick or stone masonry wall etc incl racking out joints haking for key, scrubbing down with water etc as in external surfaces of man holes, septic tank, filter bed etc incl removing of debries complete all as specified and as directed. |
| 7 | M&L for PCC 1:4:8 type D-2 (using 40mm graded stone aggregate) as in foundation, filling and mass concrete complete all as specified and as directed. |
| 8 | M&L PCC 1:2:4type B0 (12.5mm graded aggregate) as incoping, benching and similar work etc including necessary form work complete all as specified and directed. |
| 9 | M&L for walling of randomrubble masonary, Squre, recangular coursed, well bonded, bedded and solidly hearted, built in CM (1:6) complete all as specified and as directed. |
| 10 | All as per srl item No 10 above here in before but except stone masonry complete all as specified and as directed. |
| 11 | M & L for hand packing (any thickness) of broken stone or boulder at back of walls over arches etc and raising (or lowering) to the required level all as specified and directed |
| 12 | M&L for raised pointing to random or polygonal rubble masonary coursed or un coursed inCM (1:3) complete all as specified and as directed. |
| 13 | M&L for extra over hammer dressed facings,with maximumdepression on facefrom straight edgeheld against thedressed surface n. exc 20 mm; toblock-in-course masonrycomplete all as specified and as directed. |
| 14 | S&F mild steel framed work such as grills, gratings, etc with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways;railings; framework of water tanks and similar work conforming to Fe 290 Gde-E-165 complete all as specified and as directed. |
| 15 | M & L for providing 75 mm thick cement concrete ( 1:4:8) type D2 using 20 mm graded aggregate as in sub base for hard paved area all as specified and directed. |
| 16 | Providing and laying 80mm thick factory made chamfered edge cement concrete paver block of M-30 grade with approved colour, design & pattern as in footpath, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of coarse sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with fine sand and cutting of paver block as per required size and pattern, finishing and sweeping extra sand; complete all as specified and as directed. |
| 17 | Providing and laying 60mm thick factory made chamfered edge cement concrete paver block of M-30 grade with approved colour, design & pattern as in footpath, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand complete all as specified and as directed. |
| 18 | S&F Thrie metal beam crash barrier comprising of 3.00mm thick corrugated metal beam rail, 85cm above road ground level fixed on ISMC series channel vertical centre, 2 mtr in height with 1.5mtr in width below gound level, all steel part and fitments to be galvanised by hot dip process all fittings to confirm IS 1367and IS 1364 metal beam rail to be fixed on vertical post with spacers of channel section 150x75mmx5mm, 546mm long as per approved drawing/direction of Engr in Charge including cost of earthwork in cutting for making holes and cost of cement concrete in M-20 grade requiredfor embeddingthe channel postin the dugout holes cost of nuts and bolts including cost of nuts and bolts including cost of carriageof all the material involved upto site work as per clause 8.10 of MORTH & H Specification. |
| 19 | S&F PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to walls bore of the pipe 110 mm complete all as specified and as directed. |
