|
| 1 | Taking down cement or cement lime plaster of any description on brick or stone walls and concrete surface etc including raking out joints hacking for key scrubbing down with water etc complete all as specified and as directed. |
| 2 | Removing excavated soils/debris n exc 50m and depositing where directed at a level n exc. 1.5m above the starting point complete all as specified and as directed by the Engineer-in-Charge/GE. |
| 3 | Demolition of cement concrete reinforced (reinforcement cut as required to facilitate demolition) complete all as specified and as directed. |
| 4 | Demolition, Cement concrete (unreinforced) of any description and in any position not otherwise specifically provided for complete all as specified and as directed. |
| 5 | M & L for hardcore of broken bricks n exc. 63mm, deposited, spread and levelled in layers n exc. 15cm thick, watered and rammed to a true surface, complete all as specified and as directed. |
| 6 | M & L for providing 75 mm thick cement concrete ( 1:4:8) type D2 using 20 mm graded aggregate as in sub base for hard paved area all as specified and directed. |
| 7 | M&L for PCC type B-1, (1:2:4) using 20mm graded crushed stone aggregate as in coping , benching ,bed blocks etc complete all as specified and as directed. |
| 8 | M&L PCC 1:2:4type B0 (12.5mm graded aggregate) as incoping, benching and similar work etc including necessary form work complete all as specified and directed. |
| 9 | M&L for PCC 1:4:8 type D-2 (using 40mm graded stone aggregate) as in foundation, filling and mass concrete complete all as specified and as directed. |
| 10 | M&L for plain cement concrete1:2:4 type B-2 using 40 mm graded stone aggregate as in channels and drains, foundation and similar work etc complete all as specified and as directed. |
| 11 | M&L for 75 mm thick PCC type C-2 1:3:6 , using 40mm graded crushed stone aggregate as in sub base for receiving floor finishes finished even and fair complete all specified and as directed. |
| 12 | M & L for brick work with sub class \"B\" bricks straight or curved on plan exc 6 mtr mean radius built in CM (1:4) as in drain, walls and similar work etc complete all as specified and as directed. |
| 13 | M&L for walling of randomrubble masonary, square, recangular uncoursed, well bonded, bedded and solidly hearted, built in CM (1:6) complete all as specified and as directed. |
| 14 | M&L for chequered cement concrete (glossy finish) tile 300 mm x 300 mm x 25 mm thick setjointed andpointed in neat cement slurry in floor with grey cement and pigment all as specified and directed. |
| 15 | M&L for 15 mm thick screed bed in cement mortar 1:6 for layingfloor finishes under floor complete all as specified and as directed. |
| 16 | M & L Rendering 15mm thick on brick or concrete surfaces of walls in CM (1:4) including finishing the surfaces even and smooth without using extra cement as in drain etc and similar work all as directed |
| 17 | Providing and laying 80mm thick factory made chamfered edge cement concrete paver block of M-30 grade with approved colour, design & pattern as in footpath, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of coarse sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with fine sand and cutting of paver block as per required size and pattern, finishing and sweeping extra sand; complete all as specified and as directed. |
| 18 | Providing and laying 60mm thick factory made chamfered edge cement concrete paver block of M-30 grade with approved colour, design & pattern as in footpath, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand complete all as specified and as directed. |
| 19 | M&L for Machine pressed (factory made) precast plain cement concrete 1:2:4 type B-1(20mm graded crushed stone aggregate), kerb stone & the like of size 300mm x 300mm x 100mm thick or of size as approved by GE, with plain fair faces including chamfers, weathering etc, embedding in position/laid in trenches on edges of roads, including excavation in any type of soil, setting in cement mortar (1:4) returning filling and removal of surplus soil/debris to a distance n exc 50m from the starting point, complete all as specified and directed. |
| 20 | S&F framed work for drain cover such as grills, gratings, etc., with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe .290.Gde-E-165 complete all as specified and as directed. |
| 21 | S&F factory made SFRC (Steel Fibre Reinforced Cement Concrete) drain cover of 800x400x75mm thick including frames or size and design as approved by Engr in Charge of strength & durability, crack resistance, heavy load capacity, corrosion resistance and reduced noise polution complete all as specified and as directed. (Design and size shall be approved by Engr in Charge before commencement of the work). Make : Kashmir Spun Pipe & Allied Industries, Shivalik Concrete Pipes, Paves India Company or its equivalent firms. |
