|
| 1 | Supply, installation, testing and commissioning of Inverter type Hot and Cold Cassette type Air-conditioner Hi wall Model of cooling capacity 3.0 TR consisting air cooled copper condenser coil, Inbuilt Stabilizer, 3D Airflow, PM 2.5 filter, Anti-corrosion treatment for better air quality, Display on Indoor unit, cordless LED/ LCD remote control ON/Off and other parameters, hermetically sealed compressor, fan motors with fan/blower, DX cooling coil, air filter, safety Controls/overload protection ,electrical wiring, first charge of Refrigerant (Non CFC) and Oil etc with atleast 3 star or above BEE rating suitable for working on single phase 230V,50Hz power supply etc. complete all as specified and directed.Make: Bluestar/ Hitachi/ Daikin |
| 2 | Supply, installation, testing and commissioning of Inverter type Hot and Cold Split Air-conditioner Hi wall Model of cooling capacity 2.0 TR consisting air cooled copper condenser coil, Inbuilt Stabilizer, 3D Airflow, PM 2.5 filter, Anti-corrosion treatment for better air quality, Display on Indoor unit, cordless LED/ LCD remote control ON/Off and other parameters, hermetically sealed compressor, fan motors with fan/blower, DX cooling coil, air filter, safety Controls/overload protection ,electrical wiring, first charge of Refrigerant (Non CFC) and Oil etc with atleast 3 star or above BEE rating suitable for working on single phase 230V,50Hz power supply etc. complete all as specified and directed.Make: Bluestar/ Hitachi/ Daikin |
| 3 | Supply, installation, testing and commissioning of Inverter type Hot and Cold Split Air-conditioner Hi wall Model of cooling capacity 1.5 TR consisting air cooled copper condenser coil, 3D Airflow, PM 2.5 filter, Anti-corrosion treatment for better air quality,Display on Indoor unit, cordless LED/ LCD remote control ON/Off and other parameters, suitable compressor, fan motors with fan/blower, DX cooling coil, air filter, safety Controls/overload protection ,electrical wiring, first charge of Refrigerant (Non CFC) and Oil etc with at least 5 star BEE ratingsuitable for working on single phase 230V,50Hz power supply etc complete all as specified and directed by Engr in charge.Make: Bluestar/ Hitachi/ Daikin |
| 4 | Supply, installation, testing and commissioning of Window Air-conditioner of cooling capacity 1.5 TR consisting air cooled copper condenser coil, 3D Airflow, PM 2.5 filter, Anti-corrosion treatment for better air quality,Display on Indoor unit, cordless LED/ LCD remote control ON/Off and other parameters, suitable compressor, fan motors with fan/blower, DX cooling coil, air filter, safety Controls/overload protection ,electrical wiring, first charge of Refrigerant (Non CFC) and Oil etc with at least 5 star BEE ratingsuitable for working on single phase 230V,50Hz power supply etc. complete all as specified and directed.Make: Bluestar/ Hitachi/ Daikin |
| 5 | M&L for sub main wiring withtwo run of 4.0 Sq. mm PVC un-sheathed, copper conductor cable, 1100 Volt,and one run of copper earth wire 4.0 Sq mm drawn through PVC conduit concealed and all accessories,including making good the disturbed surface by Putty and matching the colour of wall with the existing colour of the (wash/paint/distemper) wherever required(as per the existing condition), complete all as specified and directed by Engr in charge.Note: Copper conductor 2 run and one run of copper earth wire shall be measured as one length. |
| 6 | S&F modular AC BOX with 16-20 Amp mini MCB 230 Volts AC complete all as specified and directed by Engr-in-charge. |
| 7 | Supply, installation, commis-sioning of Refrigerators single door, electric driven single phase, 230 volt AC supply of Capacity 180 Ltrs,BEE 3 star rated complete all as specified and directed by Engr-in-charge. Make : Voltas, LG, Samsung, Whirlpool |
| 8 | Supply, installation, commis-sioning of Refrigerators single door, electric driven single phase, 230 volt AC supply of Capacity 230 Ltrs,BEE 3 star rated complete all as specified and directed by Engr-in-charge. Make : Voltas, LG, Samsung, Whirlpool |
| 9 | Supply, installation, commis-sioning of Refrigerators double door, electric driven single phase, 230 volt AC supply of Capacity 310 Ltrs,BEE 3 star rated complete all as specified and directed by Engr-in-charge. Make : Voltas, LG, Samsung, Whirlpool |
| 10 | Supply, installation, commis-sioningwater cooler electric driven (single phase), full stainless steel having approx storage capacity of 80 litre and nominal cooling capacity of 40 Litres per hour complete all as specified and directed. |
| 11 | Supply, installation, commis-sioningwater cooler electric driven (single phase), full stainless steel having approx storage capacity of 150 litre and nominal cooling capacity of 150 Litres per hour complete all as specified and directed. |
| 12 | Supply, Installation and Testing of Monoblock pump set suitable for 5HP/3.5KW motor with 3 phase 415V, 50hz made of CI, MS, SS head range 28-44, discharge 10.3-4.7 size (suc x del) 65x65 mm power 5.5 kw protection IP 55 including foundation and all connection accessory etc.complete all as specified and directed by Engr in charge. Note: testing certifcate must be submited after intallation of unit is the responsibility of contractor only. |
| 13 | Supply,Installation and Testing of Electric motor for submersible pump of capacity 5HP/3.5KW motor with 3 phase 415 v, 50hz made of CI, MS, SS head range 28-44, discharge 10.3-4.7 size (suc x del) 65x65 mm power 5.5 kw protection IP 55 including foundation and all connection accessory etc.complete all as specified and directed by Engr in charge |
| 14 | S&F CABLOFIL wire mashed Hot dip Galvanized cable tray 54mm (h) x 100 mm (w) complete with nuts bolts washers (GI) and all accessories for mounting and supporting the cable tray system, along with vertical bends, bends Including taking down and re fixing any type of electric cable, LAN/signal cable, if require through wall cutting and making to good surface in distrubed area complete all as specified and directed by Engineer - in- Charge.Make: Legrand (Cablofil) Cat Part No- CF54/100(000073) or equivalent in Schneider/Siemens |
| 15 | S&F in cover Hot dip Galvanized for mounting and covering cables on cable tray width 100 mm along with clips Complete with all mounting and supporting accessories complete for mounting and supporting the cable tray system, along with vertical bends, bends. including taking down and re fixing any type of electric cable, LAN/signal cable if require through wall cutting and making to good surface in distrubed areacomplete all as specified and directed by Engr-in-Charge. Make Legrand (Cablofil) cat no. CM646020 or equivalent in Schneider/Siemens |
| 16 | S&F CABLOFIL wire meshed Hot dip Galvanized cable tray 54mm (h) x 200 mm (w) complete with nuts bolts washers (GI) and all accessories for mounting and supporting the cable tray systern, along with vertical bends, bends for mounting and supporting the cable tray system, along with vertical bends, bends, including taking down and re fixing any type of electric cable, LAN/signal cable, if require through wall cutting and making good surface in distrubed area complete all as specified and directed by Engineer - in -Charge.Make-Legrand (Cablofil) Cat Part No-CF54/200(000093 or equivalent in Schneider/Siemens |
| 17 | S&F cover Hot dip Galvanized for mounting and covering cables on cable tray width 200 mm along with clips Complete with all mounting and supporting accessories complete for mounting and supporting the cable tray system, along with vertical bends, bends including taking down and re fixing any type of electric cable, LAN /signal cable if require through wall cutting and making to good surface in distrubed area complete all as specified and directed by Engr-in-Charge.Make Legrand(Cablofil) cat no CM646040 or equivalent in Schneider/ Siemens |
| 18 | S&F CABLOFIL wire meshed Hot dip Galvanized cable tray 54mm(h) x 300mm(w) complete with nuts bolts washers (GI) and all accessories for mounting and supporting the cable tray system, along with vertical bends, bends for mounting and supporting the cable tray system, along with vertical bends, bends, including taking down and re fixing any type of electric cable LAN/signal cable if required through wall cutting and making to good surface in distrubedcompleteallasspecified and directed by Engineer - in - Charge. Make-Legrand(Cablofil) Cut Part No- CF54/300) (000103) or equivalent in Schneider/Siemens. |
| 19 | S&F cover Hot dip Galvanized for mounting and covering cables on cable tray width 300 mm along with clips Complete with all mounting and supporting accessories complete for mounting and supporting the cable tray system, along with vertical bends, bends, including taking down and re fixing any type of electric cable, LAN /signal cable if required through wall cutting and making to good surface in distrubed area complete all as specified and directed by Engr-in-Charge.Make :- Legrand (Cablofil) cat no. CM646050 or equivalent in Schneider/Siemens |
| 20 | S&F CABLOFIL, wire meshed Hot dip Galvanized cable tray 54mm (h) x 400 mm (w) complete with nuts bolts Rm washers (GI) and all accessories for mounting and supporting the cable tray system, along with vertical bends, bends for mounting and supporting the cable tray system, along with vertical bends, bends including taking down and re fixing any type of electric cable, LAN /signal cable if require through wall cutting and making to good surface in distrubed area complete all as specified and directed by Engr-in-Charge. Make-Legrand (Cablofil) Cat Part No-CF54/400(000203 or equivalent in schneider/Siemens. |
| 21 | S&F cover Hot dip Galvanized for mounting and covering cables on cable tray widih 400 mm along with clips Complete with all mounting and supporting accessories complete for mounting and supporting the cable tray system, along with vertical bends, bends, including taking down and re fixing any type of electric cable LAN /signal cable if require through wall cutting and making to good surface in distrubed area complete all as specified and directed by Engre-in- Charge. Make Legrand (Cablofil) cat no. CM646060 or equivalent in Schneider/Siemens |
| 22 | S&F CABLOFIL wire meshed Hot dip Galvanized cable tray 54mm (h) x 600mm (w) complete with nuts bolts washers (GI) and all accessories for mounting and supporting the cable tray system, along with vertical bends, bends for mounting and supporting the cable tray system, along with vertical bends, benda, including taking down and re foxing any type of electric cable LAN/signal cable, if require through wall cutting and making to good surface in distrubed area complete all as specified and directed by Engr-in-Charge.Make-Legrand Cablof) Cat Part No-CF54/600(000403) or equivalent in Schneider/Siemens |
| 23 | S&F cover Hot dip Galvanized for mounting and covering cables on cable tray width 600 min along with clips Complete with all mounting and supporting accessories complete for mounting and supporting the cable tray system, along with vertical bends, bands, including taking down and re fixing any type of electric cable, LAN/signal cable require through wall cutting and making to good surface in distrubed area complete all as specified and directed by Engr-in-Charge. Make Legrand Cablofil) cat no. CM646080 or equivalent in Schneider/ Siemens |
| 24 | S&F GI Raceway made from 1.5 mm thick pregalvanized sheet for top, bottom & sides and complete with top cover with rubber gasket of size 100*38 mm complete for mounting and supporting the cable tray system, along with vertical bends, bends, including taking down and re fixing any type of electric cable, LAN /signal cable, if require through wall cutting and making good surface of disturbed area complete all as specified and directed by Engineer-in-Charge.Make : Legrand Cat part No (689502) or equivalent in Panduit/Commscope |
| 25 | S&F GI Raceway made from 1.5 mm thick pregalvanized sheet for top, bottom & sides and complete with top cover with rubber gasket of size 300*38 mm complete for mounting and supporting the cable tray system, along with vertical bends, bends, including taking down and re fixing any type of electric /signal cable, if require through wall cutting and making good surface of disturbed area complete all as specified and directed by Engineer-in-Charge.Make: Legrand Cat Part No (689505) or equivalent in Panduit/Commscope |
| 26 | S&F GI Bracket for Raceway of 100 mm complete all as specified and as directed by Engineer-in-Charge. |
| 27 | S&F GI Bracket for Raceway of 300 mm complete all as specified and as directed by Engineer-in-Charge. |
| 28 | S&F coupler for above Raceway of 100 mm & 300 mm width complete all as specified and as directed by Engineer-in-Charge. |
| 29 | S&F DLP 105mm width for PVC DLP trunking complete including all accessories as required on site all as specified and as directed. Make: Legrand Cat part No 010422 or equivalent complete all as specified and directed by Engineer-in-Charge. Make of Siemens/Schneider or any other make mentioned in PS. |
| 30 | S&F Rigid non-metallic PVC conduit 25 mm dia including of boxes (junction/ terminal) but inclusive of all tees, bends, elbows, reducers, bell mouth tube ends and fixing accessories such as couplers, lock nuts, saddles, pipe hooks etc for lan/ telephone circuitscomplete all as specified and directed by Engineer-in-Charge.Note:-Work includes cutting of chases on wall and making good disturbed surfaces |
| 31 | S&F flexible PVC conduit pipe 40 mm dia including fixing accessories such as couplers, lock nuts, saddles, pipe hooks etc for lan/ telephone circuits complete all as specified and directed by Engineer-in-Charge. Note :- Work includes if require cutting of chases on wall and making good disturbed surfacesNote: (a) Srl Item No 01.00 to 05.00, 07.00 to 12.00, 19.00 to 25.00 & 29.00 of BOQ are major items for the subject tender and material in respect of these items shall be procured within one month after placing of work order and produced before Engg in Charge alongwith original purchase vouchers as per direction of Garrison Engineer and shall obtain a certificate from Engg in charge that material in respect of above mentioned items have been submitted in the office of Engg in charge in their safe custody.(b) Materials in respect of Freakishly low declared items if any at the time of acceptance of contract shall be procured within one month after placing of work order and submit the same in the office of Engg in charge alongwith original purchase vouchers in their safe custody and shall obtain a certificate from Engg in charge. |
