Tender For Repair Maint Of Rusted Ci Gi Pipe Line Valves Valves Pit And Allied Works Repair Maint To Internal Wiring Repair To Ceiling Fans Geysers Ac Etc And Connected Assets Repair Maint Of External Electric Supply Installation Oh Lines Lt Cable An, Danapur-Bihar

TDR : 53104857

Tender Notice
BOQ

20 Days Left

Danapur , Bihar

Tender Brief : Tender For Repair Maint Of Rusted Ci Gi Pipe Line Valves Valves Pit And Allied Works Repair Maint To Internal Wiring Repair To Ceiling Fans Geysers Ac Etc And Connected Assets Repair Maint Of External Electric Supply Installation Oh Lines Lt Cable An

Document Fees
₹ 500 /-

EMD
₹ 77500.0 /-

Tender Value
₹ 38.75 Lakhs /-

Submission Date
14-01-2026

Competition Type
Indian

Bidding Type
Tender

Need a Business Loan? Apply Now !


1	Excavation in trenches not exc 1.5 mtr wide & not exc 1.5 mtr in depth for foundation etc or for manholes, laying of pipe in soft / loose type of soil and getting out complete all specified and directed.
2	Returning filling in, including spreading, leveling watering & well ramming in layers not exc 25cm thick complete all specified and directed.
3	Removing excavated material to a distance not exc 50 mtr & depositing where directed at a level not exc 1.5 mtr above the starting point complete all as specified & directed.
4	Taking up or down (from wall/trenches/floor) existing GI steel tubingand connections, including cleaning for refixing or removal to storeof following sizes:- ( Note-Excavationandearth workwill be measuredandpaid seperately under relevant item. )
5	50 mm bore GI pipe
6	40 mm bore GI Pipe
7	25 mm bore GI pipe
8	20 mm bore GI pipe
9	15 mm bore GI pipe
10	Refixing only GI steel tubingand connections in new or old positionincludingcleaning internally and externally, any grade / make in trenches / wall / floor / ceiling including all type of new fittings i.e. sockets, Tee union elbow etc allas specified and directed offollowing size:-
11	50 mm bore GI pipe
12	40 mm bore GI Pipe
13	25 mm bore GI pipe
14	20 mm bore GI pipe
15	15 mm bore GI pipe
16	Supply, fixing & laying only GI tubing medium grade with one socket both end threaded in any length including cutting threading connection in new or old position and all type of GI new fittingsfor laid in trenches/wall/ceiling/ floor/all as specified and directed of following size:-
17	50 mm bore GI pipe
18	40 mm bore GI Pipe
19	25 mm bore GI pipe
20	20 mm bore GI pipe
21	15 mm bore GI pipe
22	S&F Gun metal globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixedingfor following size:-
23	50 mm bore GI pipe
24	40 mm bore GI Pipe
25	25 mm bore GI pipe
26	20 mm bore GI pipe
27	15 mm bore GI pipe
28	Taking up CI/DI watermains of following dia including all fittings with spigot and socket ends and lead joints including buring out joints and recovering lead, removal to MES store yard all as specified and directed by Engr-in-Charge. ( Note-1. Excavationandearth workwill be measuredandpaid seperately under relevant item. )
29	100 mmbore
30	150 mm bore
31	Supply & laying , fixing in trenches cast iron pipe with spigot and socket ends centrifugally cast class \" LA\" in any length of following bore dia all as specified and directed. ( run lead joint shall be measured and paid for separately.)
32	100mmbore
33	150 mm bore
34	Supply, laying and testing ductile iron pressure flanged type,class K-7 suitable for rubber gasket joints in standard working length confirming to IS-8329/2000 with inside cement mortar lining duly ISI marked laid in trenches complete all as specified and directed of following sizes:.
35	100 mm bore
36	150 mm bore
37	M&L for run lead joint with spurn yard & head for spigot and socketed end CI pipe & fittingscomplete all as specified directed by Engr in charge for following :-
38	100 mm bore
39	150mm bore
40	M & L for flanged joints with rubber fibre board gasket for cast iron pipes 150 mm bore complete all as specified.
41	S&F 25 mm dia brass ferrules screwed both end for iron pipe complete all as specified and directed by EIC.
42	S&F 20 mm dia brass ferrules screwed both end for iron pipe complete all as specified and directed by EIC.
43	Supply and fix cast iron flanged sluice valve of class 1.6 PNinstalled complete with ISI marked (IS-14846) with gun metal spindle and hand wheelall as specified and directed by EIC including taking down old unserviceable one of following size
44	100 mm bore
45	150 mm bore
46	Supply and fix CI reflux ( non return ) valve 100 mm bore as per IS 5312 with GM working parts both ends flanged and suitabely machined and drilled for and including required nut , bolts washer rubber/ fiber packing complete all as specified and directed.Make Remco/ Kirlosker.
47	S & FCIfittingsfor spigot, socket pipessuch as, bends( any type radius and angle) , tapers any type (straight bends inincreasing , decreasing or double socket etc.) Tee pieces ,single branch, \"Y\" junctions , double branch, cross( all sockets or socket and spigot), collars , caps and plugs suitable up to 150 mm bore complete all as specified .
48	All as per item 17 abovebut fixing only.
49	Material & labour for Ductile iron fittings or special for flanged ends size up to 150 mm bore pipes conforming ti IS : 1538, like bends (any radious and angle ) taper any type ( Straight, end increasing, decreasing or double socket etc) tail pieces single branches, Ý\" junction double branches,crosses (all flanged ends) complete all as specified & directed.
50	M&L for float valve high pressure with polythene float and fly complete, screwedfor iron pipe or PVC ferrule and fixed in all as specified and directed of following size:-
51	15 mm bore
52	20 mm bore
53	S & F chromium platedfancy type bib taps,cast copper alloy with crutch or butterfly handel,screwed down screwed for iron pipe or for brass ferrule and fixed for 15 mm bore dia of pipe complete all as specified and directed.
54	Demolition of oldvalve pit and M & L for brick masonry valve pit of size 900mm X 900mm X 900 mm (internal size) complete with excavation, earth work, PCC 1:3:6,type C-2 ( using 40 mm graded crushed stone aggregate) in foundation, brick work in cement mortar 1:6,internal plaster 10 mm thick rendering in cement mortar 1:4 (internally ) 4 mm thick mild steel plate cover inccluding mild steel iron frame including material and labour for preparation of new steel iron surface & applying two coat of synthetic enamel paint over a coat of red oxide primer and including locking arrangement complete suitable for upto 150 mm dia pipe complete all as specified and directed
55	Material and labour for cutting/tapping the existing CI pipe line upto 150 mm bore in position and reducing to required length for inserting of new tee of required size,branches including jointing with lead etc complete all as specified.
56	Dismantling and taking out complete assy of 15 HP ;capacity make Kirloskar submersible pump from bore well keep aside for repairing/assembling by replacemenrt of parts all as specified and directed.(Parts to be measured and paid spearately).
57	Dismenteling of complete bowl assy of 4 stage ,replacement of impellers GM , impeller rings,bearing sleeve ,ruber bushes ,neck rings ,distance bushes, thrust screws,center guid rings, connection pieces etc as per matching size and sample and requirement of pump complete all as specified and directed.
58	Dismantling of mortor taking out rotor complete and carrying out rewinding to starter by using supper quality of copper conductorof matching size in guage and weight using best quality of insulationmaterial taping varnishing drying backing complete all as specified and directed.
59	Assembling fitment with the pump and making fit for lowering with necessary connection with starter / panel with testing complete all as specified.
60	Supply and lowering / fixing MS coloumn pipe 80mm bore flange type and 7.1 mm thickness ERW steel pipe including jolinting material i.e. rubber packing nuts, / bolts washers etc.
61	Development of existing bore well by means of 250 PSI Air compressor for not less than 08 hrs under dirctiions of Engineer - in - Charge complete all as specified and directed.
62	Development of tube well by over pumping until clear discharge is met.
63	M & L for painting of valve pit cover of MS sheet of size n exc 0.90 X 0.90 M with two coat of blue synthetic enameled paint internally & externally including prepration of surface complete all as specified and directed at site.
64	Supply , installation / lowering and commissioning the submersible pump set with strove lined non return valve directly coupled with and including induction motor of 20 HP capacity for operation on 415 Volts +/- 10% , three phase , 50 Hz,copper wound & pump having 4 stage complete with necessary accessories specified by manufacturer , suitable for 1200 LPMdischarge of water at 48 meter head all as specified and directed. Make-Kirlosker/ KSB / CRI /Crompton . (Note :- rates for lowering of pump & column pipe of size 80 mm bore flanged type & M&L for new jointing material i.e. rubber packing ,nuts , bolts and washer etc.will be measured and paid separately under respective item of schedule)
65	Supply & fix in replacement fully automatic star delta stater for submersible pump comprising with over load relay , amp meter, volt meter suitable for 20 HP capacity Kirlosker/CG make submersible pump complete all as specified and drected.
66	Supply, connecting and testing (in replacement or for extention) of PVC insulated and sheathed water proof cable wih standard copper conductor flat submersible cable 1100 V grade complete all as specified for cross section area of 16 Sqmm 3 core.
67	Cleaning of OHT having height upto 18 mtr & capacity 20000 gallons by removing deposited sand,mud,silt and taking out from the tank ,Flushing out the mud water by scraping out deposited mud on surfaces insied by using steel brush complete specified and directed & Putting adequate quantites lime mixed water and removing the same through wash out followed by poring bleaching solution all around the bottom of the tank and marking the date of cleaning with synthetic enamel paint on external surface including two coats of synthetic enamel paint on all pipes of different sizes such as rising main, delivery pipe, over flow pipe & wash out pipe etc. as per colour code complete all as directed at site.
68	M&O for periodical maintenance / servicing of DG set consisting of normal repairs such as tightening of nut bolts, greasing, checking of lube oil level , fuel tank, fuel pipes, water / coolent level in radiator,cleanness of air filter, condition of hose ,V belts , battery connections / checking of battery terminals , level of distilled water in battery and checking of all other visual parts of DG set including routine cleaningof dust with vacuum cleaner etc ( once a week or as required and directed by Engr-in-Charge / JE.)(a ) For DG Set 62.5 KVA, Make;-GREAVES COTTON LTD(i) The maintenance cost of DG Set for month shall deemed to comprises of cost of labour employed for the purpose, T&P used and other petty items such as cotton waste, Kerosene oil, Grease, nuts, bolts etc. (ii)M & L for replacement of spares parts and oil will be measured and paid under relevant items of schedule ‘A’.
69	All as per item 38 above butDG Set 40 KVA, Make - KIRLOSKAR
70	All as per item 38 above butDG Set 30 KVA at ARO Make - KIRLOSKAR
71	All as per item 38 above butDG Set 30 KVA at pump house No 2, Make - KIRLOSKAR
72	Supply and fix in repair following spare parts of DG Set 62.5 KVA, Make -Make GREAVES COTTON LTD
73	Diesel Filter ( fuel filter)
74	Mobile filter (lube oil filter)
75	Air filter (primery & safety element) including air cleaner hose with T bolt and clamp.
76	Breather hose with clamp as per existing size and sample
77	V Belt for fan drive.
78	Starter ring
79	Fuel pipe with copper washer and banjo bolt ( fuel tank to fuelfilter)
80	Fuel pipe with copper washer and banjo bolt( fuelfilter to pump inlet)
81	Radiator drain cock with plug and adoptor.
82	Supply and fix in repair following spare parts ofDG Set 40 KVA, Make - KIRLOSKAR
83	Diesel Filter ( fuel filter)
84	Mobile filter (lube oil filter)
85	Air filter (primery & safety element) including air cleaner hose withT bolt and clamp.
86	Breather hose with clamp as per existing size and sample
87	O ring for breather plate.
88	V Belt for fan drive.
89	Starter ring
90	Fuel pipe with copper washer and banjo bolt ( fuel tank to fuelfilter)
91	Water pump belt - V section
92	Supply and fix in repair following spare parts ofDG Set 30 KVA, Make - KIRLOSKAR
93	Diesel Filter ( fuel filter)
94	Mobile filter (lube oil filter)
95	Air filter (primery & safety element) including air cleaner hose withT bolt and clamp.
96	Breather hose with clamp as per existing size and sample
97	V Belt for fan drive.
98	Starter ring
99	Fuel pipe with copper washer and banjo bolt ( fuel tank to fuelfilter)
100	Fuel pipe with copper washer and banjo bolt( fuelfilter to pump inlet)
101	Radiator drain cock with plug and adoptor.
102	M/L for cleaning the fuel tank both internally and externally by removing all the dust / sediments etc including replacement of fuel tank lid by new one for DG set of capacity 30 KVA to 62.5 KVA DG set
103	Taking down the defective water pump from DG set of any type and capacity and replace with new one for DG set of cap 30 KVA to 62.5 KVA all as directed .
104	M&L for Repair to Radiator assy by disconnecting the radiator from engine frame and servicing/cleaning with acid and brazing where required to stop leaking tubes/joints etc. cleaning fins and re-fixing the same for DG set 30 KVA to 62.5 KVA all as directed .
105	Supplying and filling coolant as recommended by manufacturer in DG sets.
106	Supplyin sump / topping up engine oil, multi grade 20w/40 in engine or replacement of engine oil for DG SETS.Make: Indian oil / Hindustan petroleum / Castrol.
107	Supplyand fix in replacement battery of capacity 150 Ah , 12 V suitable for DG sets
108	Supplyand fix in replacement battery of capacity 110 Ah , 12 V suitable for DG sets
109	Supply and filling distilled water in battery .
110	M&L for replacement of brass battery terminal suitable for lead acid battery 12 V any AH .
111	M &L for Removing the fuel injection pump (FIP) from DG set cap 30 to 62.5 KVA and carry out servicing and calibration from authorised maker\"s work shop including replacement of injectors, nozzles, etc. and refitting the same for smooth and efficient functioning all as directed. Note :-Repairs will be carried out from authorised workshop of MICO or manufacturer of DG set.
112	Taking down defective self starter and supply and fix in replacement self starter for 30 KVA to 62.5 KVA DG set of Kirloskar make.
113	Supply and fix in replacement AVR ( automatic voltage regulator ) for DG sets 30 KVA to 62.5 KVA complete all as specified and directed.
114	Supply and fixing in replacement DG set controller as per existing in control panel of DG Set 30 KVA to 62.5 KVA , Make - Kirloskar, duly programmed by manufacturer ,testing and comissioning complete all as specified and directed.
115	Dismantling and taking out all burnt windings from Armature, Main field, stator field and armature complete assembly fitted in 30 KVA DG Sets and M& L for rewinding of alternator with super enameled copper wire of existing gauge size and turns and makers specifications including all associated insulating material such as separator and heat varnishing etc including both inner and outer bearing of existing size and model, after complete repair of alternator re-assembling and refixing the same in position including testing complete all as specified and directed.
116	S & F in repair on load changeover switch with sheet steel enclosure,I-O-II 3 phase & neutral,415 V, 50 Hz, 250 Acomplete all as specified and directed.
117	S & F in repair on load changeover switch with sheet steel enclosure,I-O-II 3 phase & neutral,415 V, 50 Hz, 200 Acomplete all as specified and directed.
118	S & F in repair on load changeover switch with sheet steel enclosure,I-O-II 3 phase & neutral,415 V, 50 Hz, 100 Acomplete all as specified and directed.
119	Supply and fixing in replacementheating element of 1.5 KW /2.0 any type , as per sample ISI marked.
120	Supply & replacecomplete siphon assembly as per existing sample including rubber washer andnuts & bolts suitable for water heater of capacity 25 Ltrs of any make.
121	S & F in replacement SS inner tank as per size and samplefor geyser of capacity 25 ltrs.
122	Supply and fixing in replacement thermo state switch suitable for above geyser ISI marked.
123	Supply and fixing in replacement PVC pipe pipes of 450 mm longbest quality, heavy duty for geyser of 15 mm dia with brass connecting nuts/couples.
124	S & F in replacement stop cocks brass CP 15 mm dia suitable for above geyser ISI Marked.
125	Supply and fixing in replacement PVC insulated copper conductor cable 3 core 6 Sq mm 660/1100 volts grade make Kalinga/Finolex/Rallison.
126	Supply and fixing in replacement of plug top 3 pin 15 Amps.
127	Supply and fixing in replacement indicator lamps red and green colour 230 volts 50 Hz AC supply.
128	Supply and fixing in replacement safety valve to blow of at high ratedtemperature having latestISI marked.
129	Supply and fixing in replacement glass wool around the geyser.
130	Collecting and transporting of desert coolers from MES store yard/user bldgs to work shop and overhauling of fan motar, oiling to vertical pump including replacement of unserviceable bolts and nuts with washers, clamps & wood wool pad (set of 3)of good quality etc.including M & L for preparation of steel surface of desert coolers followed by painting with one coat of synthetic enameled paint complete on metallic surface external and internal complete and returning back to MES store yard/user locations complete all as specified and directed.
131	Supply & Fixing in repair fan motor 1/7 HP or any HP complete set with arm and fan blade etc. ,230 volt,50Hz cycles A/C supply of make Summer Cool/CG /Havells/Bajaj complete in all respect.
132	Supply & Fixing in repair submersible water lifting pump,single phase suitable for desert coolers complete in all respect.
133	M & L for replacement of unserviceable sealed unit (compressor) of water coolers with new sealed unit (recommended by manufactorer) sealed unit make kirloskar/Tecumsha for water cooler make Shri Ram / Usha / Voltas or Blue Star capacity from 40/80 Ltrs.
134	Supply & Fixing in repair thermostatic switch for water cooler of capacity 40/80 Ltrs
135	Supply & Fixing in repair chromium plated push cock, self closing, spring loaded type 15mm dia.
136	Supply & Fixing in repair blower motor as per size & sample in water cooler, commissioning and testing complete in all respect.
137	M & L complete servicing of water cooler by cleanning of coils with caustic soda, removal of rust from sheetmetal frame, cleaning of tank and cheackingof water connection and fixing in original position complete in all respects.
138	Repair to refrigerators complete by cleaning of system properly with CTC. Charging refrigerant including replacement of unserviceable sealed unit (Compressor) of Refrigerator with new sealed unit, recommendedby manufacturer of 390/320/340 Ltrscapacity.
139	Repair to refrigerators complete by cleaning of system properly with CTC. Charging refrigerant including replacement of unserviceable sealed unit (Compressor) of Refrigerator with new sealed unit, recommendedby manufacturer of 230/165 Ltrscapacity.
140	Supply andfixing in repair of box type relayfor any make and capacity upto 390 ltrs refrigerator.
141	Supply andfixing in repairthermostatic switch for any make and capacity upto 390 ltrs refrigerator.
142	Repair to window / Split typeAir conditioner by replacement of unserviceable sealed unit i.e.compressor (rotery or hermetic) ,cleaning of system properly with CTC and charging the refrigerant(including cost of refrigerant ) recommended by manufacturer of AC including commissioning and testing complete all as specified and directed by Engr - in - Charge at site for1.5 TR Window / Split type AC.
143	S & F in replacementrelaysuitable for split type AC / window type AC upto capacity of 1.5 TR.
144	S & F in replacementover load protector suitable for split type AC of 1.5Ton.
145	S & F in replacement for air conditioners, capacitor 36 / 45 / 50 +6 mfd +/- 5% ,440 V AC .
146	S & F in replacementthermostatic switch suitable for 1.5 / 2 ton AC make Renutrol.
147	S & F in repalcement fan motor with blade as per size and sample suitable for FCU unit of Split type AC of capacity1.5 Tonof make LG/Voltas/Blue Star complete all as specified and directed.
148	S & F in repalcement blower fan motorfor indoorunit of Split type AC of capacity1.5 Tonof make LG/Voltas/Blue Star complete all as specified and directed.
149	S & F in repalcementfan motor with bladefor Window type AC of capacity1.5Tonof make LG/Voltas complete all as specified and directed.
150	M & Lfor gas charging in split type AC unit 1.5 TR capacity using refrigerant as per standard practice after flushing, vacuuming including detecting leakage, rectification leakage, commissioning and testing complete all as specified and directed.
151	All as per item 120 above but for window type AC unit of capacity 1.5 TR capacity .
152	S & F in repairpower PCB as per sample suitable for 1.5/2 TR Split type AC, making connection & testing complete all as specified and directed.
153	S & F in repair copper connection pipe with union at both ends and with insulation, between FCU unit and indoor unitof length twelve feetfor 1.5/2 TR Split type AC, making connection & testing complete all as specified and directed.
154	S & F in repairdrain hose pipe suitable for 1.5 / 2 TR split type AC.
155	M & L for complete servicing of Air conditioner window/split type including cleaning of colling coil and condenser by caustic soda solution including removal of dust by using blower/brush to external fins and from beneath assets, cleaning of base tray properly including oil to fan & condenser motor, tightening of all electrical connections with proper alignment including fitments in their locations and repairs of suction &discharge tubes complete in all respects. (Note :-Filling of refrigerant if required or parts to be replaced will be measured and paid separately under respective items)
156	Repair of voltage stabilizer of capacity 5 KVA/4KVA by carying out rewinding of main transformer, replacement of volt meter, relay, timer and IC circuit as requiredand making functional and testing complete all as specified and directed .
157	M&L earthing complete with galvanised steel earth plate 600X600X6.3 mm thick buried directly in ground (earth pit not les than 2.25 M deep below GL with top edge of plate not less than 1.5 m below GL) connected with GI earth strip of32X6 mmas earthing leadsby means of bolts, nuts, check nuts and washers besideWelding / brazing at all joints as shown on drawings and including excavation, earth work.GI pipe light grade40 mm bore for protection of GI earth strip from earth electrode to and including the earth test point, supplying and laying charcoal dust, common saltPCC (1:2:4) type B1chamber and MS angle iron frame of 40mmx40mm x3 mmand RCC cover 40 mm thick (1:2:4) type B1 using 20 mm graded stone aggregate reinforced with 8 mm dia TMT bars @ 75 mm C/C both ways with MS handle 12 mm dia, PGI funnel and wire mesh, 20 mm dia GI pipe light grade for watering all as shown in electrical plate No 3 of SSR Part -Iand conected to earth test point including testing complete all as secified and directed.
158	Supplying & Fixing GI electrode chemical earthing ofhigh conductive, corrosion resistant, CPRI testedmaintenance free chemical earthing pit, to achive earth resistance value less than or equal to 3 Ohme & EN voltage < 02 V , pipe in pipe technology based in which primary conductor (Pipe) having 40 MM dia and secondary conductor having 80 MM dia. The primary conductor is inserted into secondray conductor and spce between secondary and primary conductor of earthing electrode should be filled with crystalline compound. The length of this electrodes is min 3000 MM (3 meters) andearth pit\"sbore hole should be of dia 200 to 250 mmand min depth3.50 meters. Length of electrode will be increase with connecting of 32 x 6 mm GI strip extra, and total depth of earthing electrodes should not less than 3.50 meters. Around the earth electrode earth pit bore hole should be backfilled with minimum50 Kg of ground enhencement compoundERIC ( ERIC Contains mixture of Silica sulphate, Alumina, Iron Oxide, titanium Oxide, Calcium Oxide, Magnesium Oxide,Sodium Oxide, Zink Oxide etc. ). including RCC earthing pit having 450 x 450 CI chamber cover all as directed by Engineer-in-Charge.( Note : If less than 3 Ohme result has not acheived at site the contractoris responsible to do grid system to achieve the desired result and no extra payment shall bemade tothe contractor for making grid system) Make Remedies, Model - RSPL-G803 / MRS agency Model G-80.
159	Supplying & Fixing Copper electrode chemical earthingofhigh conductive, corrosion resistant, CPRI testedmaintenance free chemical earthing pit ( each set will be in grid of three earthing ) to achive earth resistance value less than or equal to 2 Ohme & EN voltage < 02 V, pipe in pipe technology based in which primary conductor (Pipe) having 40 MM dia and secondary conductor having 80 MM dia. The primary conductor is inserted into secondray conductor and spce between secondary and primary conductor of earthing electrode should be filled with crystalline compound. The length of this electrodes is min 3000 MM (3 meters) andearth pit\"sbore hole should be of dia 200 to 250 mmand min depth3.50 meters. Length of electrode will be increase with connecting of 20 X3.15 mm copper strip extra, and total depth of earthing electrodes should not less than 3.50 meters. Around the earth electrode earth pit bore hole should be backfilled with minimum50 Kg of ground enhencement compoundERIC ( ERIC Contains mixture of Silica sulphate, Alumina, Iron Oxide, titanium Oxide, Calcium Oxide, Magnesium Oxide,Sodium Oxide, Zink Oxide etc. ). including RCC earthing pit having 450 x 450 CI chamber cover all as directed by Engineer-in-Charge.( Note : If less than 1 Ohme result has not acheived at site the contractoris responsible to do grid system to achieve the desired result and no extra payment shall bemade tothe contractor for making grid system.) Make Remedies / MRS agency.
160	Taking down carefully copper/aluminium point wiring (Light,fan,socket or power) complete fitting such as switches, ceiling rose, regulator, sockets etc.removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of wall, floors, etc. all as specified and directed.
161	M&L light fan point controlled by one switch with PVC insulated, unsheathed , multi stranded, single core copper conductor FRLS ( Flame Retardant Low Smoke) cable 1.50 Sqmm suitable for fixing in concealed PVC conduit of size not less than 20 mm dia with metalflush boxes including white cover plate with frame of required module.Metal flush box should not less than2 mm thickduly painted inside and outside with two coats of synthetic enamel paint over one coat of red oxide primer of requiredmodule suitable for housing modular switches, socket, fan regulator etc. PVC insulated, unsheathed, multi stranded, single core copper conductor FRLScable 1.50 Sqmm used as earth wire to commen earth and connected to common dolly drawn in same conduit all as specified.
162	All as per item No 131 above but one 3/5 pin socket out let5 amp on same board with other switches.
163	All as per item No 131 above but socket out let 5 amp on independent board.
164	All as per item No 131 above but One bell/ buzzer point controlled by one push button on the same board with other switches or independent with cables 1.5 sq.mm size
165	All as per item No 131 above but one light point controlled by two two way switches.
166	All as per item No 131 above but socket out let 3/6 pin 15 Amp with 2.5 sq mm size copper conductor for power point on indipendent board.
167	Supply & Fixing switch modular single pole, one way 6 Amp ,01 module.
168	Supply & Fixing switch modular bell push 6 Amp ,01 module.
169	Supply & Fixing switch modular , two way 6 Amp ,01 module.
170	Supply & Fixing switch modular single pole, one way 16 Amp ,01 module.
171	Supply & Fixing modular socket 6 Amp-2/3 pin combined ,2 module.
172	Supply & Fixing modular socket 6/16 Amp-2/3 pin combined ,2 module.
173	S&F Modular electronic type step fan regulator, 120 W-2 module.
174	M&L lightfan pointcontrolled by one switch with PVCinsulated,unsheathed , multi stranded , single core copper conductor cable 1.50 Sqmm suitable for fixing in concealed conduit 20 mm dia with sunken pressed steel terminal boxes 2 mm thick of required size , duly paintedinside and outside with two coats of synthetic enamel paint over one coat of red oxide primer including3 mm thick plastic laminated sheet cover housing switches ,socket, fan regulator etc. PVC insulated, unsheathed, multi stranded, single core copper conductor cable 1.50 Sqmm used as common earth wireand connected to common earth dolly& drawn in same conduit all as specified.
175	All as per item No 144 above but one 3/5 pin socket out let5 amp on same board with other switches.
176	All as per item No 144 above but socket 5 amp on independent board.
177	All as per item No 144 above but One bell/ buzzer point controlled by one push button on the same board with other switches or independent with cables 1.5 sq.mm size
178	All as per item No 144 above but one light point controlled by two two way switches.
179	All as per item No 144 above but socket out let 3/6 pin 15 Amp with 2.5 sq mm size copper conductor for power point on indipendent board.
180	Supply & Fixing switch piano flush type single pole one way 5 Amp.
181	Supply & Fixing bell pushflush type switch.
182	Supply & Fixing switch piano flush type two way 5 Amp.
183	Supply & Fixing socket 3/5 pin 5 Amp flush type.
184	Supply & Fixing switch socket combination 3/6 pin 5/15 Amp universal type.
185	Supply & Fixing electronic stepped typefan regulator.
186	Supply & Fixing call bell ding dong type 230 Volts AC supply.
187	Supply & Fixing ceiling rose surface backlite 65X20 mm two to three terminals complete all as specified and directed.
188	Supply & Fixing lamp holder PVC / Ploycarbonate type.
189	Taking down carefully copper/aluminium power/sub main wiring ofany size / typeall as specified and directed.
190	M & L for power/sub main wiring with four runs of single core 6 sqmm size and two run of single core 6.0 sqmm (green colour as earth continuty conductor ) PVC insulated unsheathed multi stranded copper conductor cables drawn through and including rigid PVC concealed conduit complete all as specified and directed.( Note - Four runs of 6 sq mm single core copper conductor and two runs of 6.0 Sq mm copper conductor shall be measured as one unit length.)
191	M & L for power/sub main wiring with two runs of single core 4 sqmm size and one run of single core 4.0 sqmm (green colour as earth continuty conductor ) PVC insulated unsheathed multi stranded copper conductor cables drawn through and including rigid PVC concealed conduit complete all as specified and directed.( Note - two runs of 4 sq mm single core copper conductor and one runs of 4.0 Sq mm copper conductor shall be measured as one unit length.)
192	M & L for power/sub main wiring with two runs of single core 6 sqmm size and one run of single core 6.0 sqmm (green colour as earth continuty conductor ) PVC insulated unsheathed multi stranded copper conductor cables drawn through and including rigid PVC concealed conduit complete all as specified and directed.( Note - two runs of 6 sq mm single core copper conductor and one runs of 6.0 Sq mm copper conductor shall be measured as one unit length.)
193	Supply & fixing earth plug enclosure (plug and socket ) with MCB, SP 20 Amps modular type complete all as specified and directed .
194	Taking down existinglight fitting of any type,make & capacity .
195	Supply and fixing energy saving LED lights fitting 1x 20W, 220V, AC, natural white / warm whitedecorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose, including its all acessoriescomplete all as specified and directed .
196	Supply and fixing engineering plastic batten with white acrylic coverLED light ( integrated LED channel) natural white / warm white,energy saving complete with its all acessories internally perwired and including connecting up with twin core twistered flexible copper conductor cable of suitable size complete all as specified and directed of 09 W .
197	Supply and fixing recess/surface mounting LED luminaire of size 600 mmx 600 mmwhite 35/36 watt, 230 volts with driver connector block etc complete with all accessories prewired and including connecting up with twin core twisted flexible copper conductor of suitable size complete all as specified and directed.
198	Supply & Fixing recess/surface mounting sleek round / Square LED downlight luminairewhite 15 Watt , 230 Volts, complete withdriver, connector block ,etc, complete with all accessories pre wired and including connecting up with twin core twisted flexible copper conductor of suitable size.
199	Supply & Fixing integral LED bulkhead luminaire, 10 W, 230 Volts, IP 65 protection decorative surface mounted , complete with all accessories pre wired and including connecting up with twin core twisted flexible copper conductor of suitable size.
200	Supply & Fixing in replacement Bldg securityLED light fittings with pressure dia cast aluminium of 35 watts and including and connceting up ceiling rose and fittings with 3 core, PVC insulated multistranded copper conductor cable of 1.5 Sqmmcomplete all as specified and directed
201	Supply & Fixing in replacement LED lamp 12 Watt.
202	Supply & Fixing in replacement LED lamp 9 Watt .
203	Supply and fixing rechargeable LED bulb Cool Day light 9/10watts having Luminous Efficacy range lies between ( ≥100 and <105 ) lm/W,CRI 80 as per BEE guidelines Long Life 25000 hours , colour temp 6500 K , frosted glass min back up time 4 Hrs after charge, In-built surge protection of 3 KVA 220V,ACcomplete all as specified and as directed.
204	Taking down old U/S MCCB/MCB DB of any type, make complete all as specified and directed.
205	Supply & Fixing sheet metal enclouser MCCB DBIP 43 double door bus bar neutral link earth bar and din rail TPN 4 way complete all specified and directed.
206	Supply & Fixing sheet metal enclouser MCB DB double door bus bar neutral link,earth bar and din rail SPN 12 way complete all specified and directed.
207	Supply & Fixing sheet metal enclouser MCB DB double door bus bar neutral link,earth bar and din rail SPN 8 way complete all specified and directed.
208	Supply & Fixing sheet metal enclouser MCB DB double door bus bar neutral link,earth bar and din rail TPN 4 way complete all specified and directed.
209	Taking down old U/S MCCB / MCB of any type,make complete all as specified and directed.
210	S & F in replacement of MCCB 4 pole 415 Volt, 50 Hz,100 Amps with breaking capacity 16 KA fixed type all as specified and directed.
211	S & F in replacement of MCCB 4 pole 415 Volt, 50 Hz,125 Amps with breaking capacity 16 KA fixed type complete all as specified and directed.
212	Supply & Fixing MCB TPN 16 to 32 Amps415 volts, 10KA \"C\" curve.
213	Supply & Fixing MCB TPN 40 to 63 Amps415 volts, 10KA \"C\" curve.
214	Supply & Fixing MCB SPN 32 Amps240 volts, 10 KA, \"C\" curve.
215	Supply & Fixing MCB SPN 40 to 63 Amps240 volts, 10 KA, \"C\" curve.
216	Supply & Fixing MCB SP 5 to 32 Amps240 volts, 10 KA, \"C\" curve.
217	Taking down ceiling fan of any sweep from its position opening the fan for inspection of worn out/ unserviceable parts. Repairing with replacement of unserviceable parts if required cleaning of blade and body properly oiling, greasing of bearing/ bush all as specified and fixing the fan in position complete all specified and directed ( Note :- Parts to be replaced will be measured and paid separetly).
218	M & L for painting of ceiling fans complete, in situ with synthetic enamel paint by spraying including filling cavities with filler, one coat after cleaning of dust etc.
219	Transporting of unserviceable ceiling fans of 1200 mm sweep to work shop and carrying out rewinding to the starter by using superior quality enameled copper conductor of matching size in weight gauge, application best quality of supper enameled insulation material tapping varnishing drying and re-fitment with testing complete all specified and directed.
220	Ditto but for ceiling fan of 1400 mm sweep 230 volt AC 50 Hz.
221	Ditto but for heavy duty exhaust fan 300mm sweep 230 volt AC 50 Hz.
222	Dittobut for pedestal fan 400mm sweep 230 volt AC 50 Hz.
223	Ditto but for wall mounting fan 400mm sweep 230 volt AC 50 Hz.
224	Supply & fix in replacmentfans ceiling having copper winding motor ,complete with remote and other accessories 230 V,50 Hz AC ,1200 mm sweep. With service value 6 .00 BEE 5 star rated with BLDC motor ( Brushless direct current motor) complete all as specified and directed.
225	Ditto but for pedestal fan metal body 500mm sweep 230 volt AC 50 Hz.
226	Ditto but for wall mounting fan metal body 400mm sweep 230 volt AC 50 Hz.
227	Supply & fix in replacement exhaust fans heavy duty complete steel body and copper winding fan motor,1400 rpm ,AC single phase 230/ 240 V, 50 Hz AC, of size 300 mm sweep with louver including testing and commissioning complete all as specified and as directed at site .
228	Supply and fixing in replacement capacitor 2.5/3.15 mfd. .
229	Supply and fixing in replacement fan blade suiatable for 400mm sweep pedestal fan/ Wall mounting fan.
230	Supply and fixing in replacement fan blade suiatable for300 mm sweep exhaust fan.
231	Supply and fixing in replacement ball bearing of size 6201 / 6202 / 6203 NBC suiatable forceiling fan / exhaust fan.
232	Supply and fixing in replacement rubber bush ( reel type) suiatable for 1200mm/1400mm sweep ceiling fan.
233	Takingdowntheexisting defectiveLTUGcable fromtrenches / pipes/ poleforfault finding / replacement, all as specified and directed of any size between 10 Sq mm to 50 Sq mm 3.5 core/4 Core. ( Note-Excavationandearth workwill be measuredandpaid seperately under relevant item. )
234	All as per item No. 203.00 above but size 120 Sqmm 3.5 core to 240 Sq mm 3.5 core.
235	Supply and laying ,jointing and testingXLPE insulated extrudedPVC outer sheath and inner sheath galvanized steel armoured cable with aluminium conductor suitable for rated voltage of 1100 Volts grade conforming to IS 7089 (Pt I of 1988) laid in tranches/ pipe/duct/pole complete all as specified and directed size 10 Sqmm 4 core.
236	All as per item 205 above but size 16 sq mm 4 core.
237	All as per item 205 above but size 25 sq mm 4 core.
238	All as per item 205 above but size 50 sq mm 3.5 core.
239	All as per item 205 above but size 120 Sq mm 3.5 core.
240	All as per item 205 above but size 240 Sq mm 3.5 core.
241	Supply & laying sand cushioning for cable protection in trenches 8 cm before laying cable and 15 cm thick over the cable complete all as specified and ditected.
242	Supply & laying brick for protection of cable sub class \"B\"laid dry flat across the cable with width equal to the length of whole brickscomplete all as specified and ditected.
243	Labour for boring, holes for inserting of 50/80 mm bore GI pope under the road/hard standing or any other location not less than 1200 mm deeep complete all as specified and ditected.
244	M & L GI pipe 40 mm bore light grade fixed on pole/under road/on wall for protection of cable including all fittings complete all as specified and directed.
245	M & L GI pipe 50 mm bore light grade fixed on pole/under road/on wall for protection of cable including all fittings complete all as specified and directed.
246	M & L GI pipe 80 mm bore light grade fixed on pole/under road/on wall for protection of cable including all fittings complete all as specified and directed.
247	S & F in replacement of MCCB 4 pole 415 Volt, 50 Hz, 250 Amps with breaking capacity 36 KA adjustable, theremal magnetic release type all as specified and directed.
248	S & F in replacement of MCCB 4 pole 415 Volt, 50 Hz, 200 Amps with breaking capacity 36 KA adjustable, theremal magnetic release type all as specified and directed.
249	S & F in replacement of MCCB 4 pole 415 Volt, 50 Hz,125 Amps with breaking capacity 16 KA fixed, theremal magnetic release type all as specified and directed.
250	S & F in replacement of MCCB 4 pole 415 Volt, 50 Hz,100 Amps with breaking capacity 16 KA fixed, theremal magnetic release type all as specified and directed.
251	S & F in replacement of MCCB 4 pole 415 Volt, 50 Hz,63 Amps with breaking capacity 16 KA fixed, theremal magnetic release type all as specified and directed.
252	Taking downu/s street light fitting/flood light of any type and make & capacity.
253	Supply and fix roadway luminaire LED light fittings of 60 watts and including necessary electric connection with 2.5 Sqmm twin core Copper conductor unarmoured cable, complete all as specified and directed.
254	All as per item No. 223 above but of 70 watts .
255	Supply and fix LED Flood light 70 W IP 66 including necessary electric connection with twin core twisted flexible copper conductor cable of suitable size .
256	All as per item No. 225 above but of 210 watts
257	M&L for cleaning of all condensor tubes of central/package AC plant by disconnecting the condensor from the system, cleaning by descaling pump of suitable capacity using descaling solution of Make:-MAIC / HIBIRD or Hydrochloric acid 20%, cleaning the system through cooling tower by using descaling solution, cleaning condensor tubes by nylon brushes & mild steel rods of suitable size and necessary pumping set and tools etc complete for smooth and proper functioning of plants of following cap of plant :-(Note:- T&P such as pumps, tube etc & descaling solution etc shall be arranged by the contractor at his own cost.)
258	3x 7.5 TR Cap (ICU Plant MH).
259	2x 5 TR Cap (Signal centre)
260	M&L for Cleaning and Servicing of nozzles & motorof cooling tower of central/package AC plants completeof any acapcity, as and when required or directed.
261	M&L for replacement of Contactors for 3 phase compressor rating-35 Amps and testing completeall as directed. Make-L&T/BCH
262	M&L for replacement of O/L relay suitable for 35 Amps contactor completeall as directed. Make- L&T, Havells, BCH or equivalent.
263	M&L for replacement of O/L relay suitable for 25 Amps contactor completeall as directed. Make- L&T, Havells, BCH or equivalent.
264	S & F in repair Gun metal gate valve, ISI marked complete with iron wheel head,screwed both ends for iron pipe of following sizes complete all as specified and directed
265	25 mm bore
266	40 mm bore
267	50 mm bore
268	S&F in repair On load change over Switch, 100 Amps, 4 pole, 415 Volts, front operated complete all as directed.
269	S&F in repair On load change over Switch, 63 Amps, 4 pole, 415 Volts, front operated complete all specified and directed.
270	M&L for replacement of block bearing of blower fan including balancing of blower fan for package type AC, complete all specified and directed.
271	M&L for replacement of block bearing of blower fan including balancing of blower fan for Central AC complete all specified and directed.
272	Dismantling burnt electric motor of capacity 2 HP, 3 phase 415 Volts, 50 cycle from booster/ Blower/ CT fan including cutting burnt coils, cleaning the slots and rewinding with and including super enamelled copper wire of existing size & gauge, re-insulating, two coats varnishing & heating, reassembling and commissioning & testing complete all specified and directed.
273	M&L for Maintenance of DG set at Danapur and carrying out ‘B’ check and replacement of ‘B’ check kit filters such as Oil filter, by pass filter, fuel filter,CR element and CR plates complete with ‘O’ rings and draining of Engine oil and topping up with the new engine oil complete testing all as specified and directed by the Engr-in-Charge for the following capacity DG sets:-Note :-(i) Engine oil shall be measured and paid separately(ii) Labour & transportation shall be arranged by contractor,quoted rate deemed to be inclusive in the unit rate.Make: KIRLOSKER/ CUMMINS /GREAVES/ GREAVES COTTON/ASIATIC/ RUSTON
274	30KVA DG Set
275	70KVA DG Set
276	82.5 KVA DG Set
277	100 KVA DG Set
278	110 KVA DG Set
279	125 KVA DG Set
280	160 KVA DG Set
281	M&L for Renewal/Replacement of unserviceable batteries with maintenance free batteries of 150 AH, 12V including connecting to DG set complete all as directed.
282	M&L for Renewal/Replacement of unserviceable batteries with maintenance free batteries of 180 AH, 12V including connecting to DG set complete all specified and directed.
283	Attending thebreakdown of any capacity/make DG Sets, AMF Panels, by Technician & helper for checking all components and rectifythe fault and give report to concern JE complete all specified and directed. Note :- Spare Parts for rectify the fault is measured and paid seperately.
284	S&FAutomatic cut off type Battery Charger suitable for 12 V,up to 10 Amp Battery complete all specified and directed.
285	S&F Automatic cut off type Battery Charger suitable for 24 V, up to 10 Amp Battery complete all specified and directed.
286	Supply and filling the new engine oil 20W/40 for toping up upto the required level complete all specified and directed
287	Supply and filling the new engine oil 15W/40 for toping up upto the required level complete all specified and directed.
288	Drain out the fuel from the fuel tank of DG set of capacity 500 Ltrs and above and keeping it in separate container safely, disconnecting all the fuel lines and other mechanical connections and taking out the fuel tank for cleaning, internally and externally by removing all the accumulated dirt/ sediment, leak testing the tank and welding/ brazing including one coat ofsynthetic enamel paint, refixing the tank in its original position, replacing the drain plug and PVC pipe, calibrating the fuel tank, refilling the drained out fuel back into the tank and marking of liters in gauge and provision of locking arrangements complete all specified and directed.
289	All as per item No. 246 above but upto 500 Ltrs complete all specified and directed.
290	M&L forInhibitor corrosion (coolant additive concentrate) required for top up (TVS Make) complete all specified and directed
291	Supply and topping up of acid mixture suitable for lead acid batteries of 12 volts complete all specified and directed.
292	Supply and topping up of distilled water suitable for lead acid batteries of 12 volts complete all specified and directed.
293	M&L for lifting the Gen Set above up to 200 KVA after dissconnection complete from cables, Shifting to other place within 25 mtr sourrounding area and making PCC foundation of sizesuitable to existing DG Setwith 1 : 2 : 4 PCC. Including smooth finishing.Shifting the DG Set on newfoundation with all necessary arrangement of Cables Connections, Testing and commissioning complete all as directed by Engr-in-Charge.Notes :- All items & Manpower including Crane for lifting up and placing again on new foundation is included in quoted rates.

Tender Documents

SR No	FileName	File Description
1	Click here to download tender document	Tender Documents
2	Click here to download tender document	Tender Documents
3	Click here to download tender document	Tender Documents
4	Click here to download tender document	Tender Documents
5	Click here to download tender document	Tender Documents
6	Click here to download tender document	Tender Documents

Also Visit

Tenders

Bihar Tenders

Construction Tenders

Pipe Line Project Tenders

Pipe Laying Tenders

Disclaimer

We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.

Top

Tender For Repair Maint Of Rusted Ci Gi Pipe Line Valves Valves Pit And Allied Works Repair Maint To Internal Wiring Repair To Ceiling Fans Geysers Ac Etc And Connected Assets Repair Maint Of External Electric Supply Installation Oh Lines Lt Cable An, Danapur-Bihar

Tender Documents

Disclaimer

About Us

Services

Browse Tenders

For Sales Inquiry

Tender For Repair Maint Of Rusted Ci Gi Pipe Line Valves Valves Pit And Allied Works Repair Maint To Internal Wiring Repair To Ceiling Fans Geysers Ac Etc And Connected Assets Repair Maint Of External Electric Supply Installation Oh Lines Lt Cable An, Danapur-Bihar

Tender Documents

Disclaimer

OTP Verification

About Us

Services

Browse Tenders

For Sales Inquiry

Connect With Us