|
| 1 | Dismantling wrought iron or mild steel work of any description not otherwise provided for, complete all as specified and as directed at site. |
| 2 | S&F Aluminium anodizedpowder coated sliding windows ofthree track system and provn of alu shutters (glazed and gauzed) sliding type made out of standard aluminium section and glazing with 5.50mm thickand stainless steel wire cloth of 0.36mm nominal dia of wire and average width of apperture 1.40mm complete including necessary accessories, complete all as specified and directed and as shown in Drawing No.CECZ TD/804 Sheet No. 1/3 to 3/3 dated 13-08-2021 |
| 3 | S & F aluminium deko grill with side beading for existing aluminium door & windows of selectedsize, shapes and pattern, section size of grill not less than 5mm thickness all as per manufactures instruction and directed by Engr-in-Charge. |
| 4 | S & F powder coated (minimum thickness of powder coating 50 micron) aluminium anodised frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing, etc complete all as specified and directed. |
| 5 | S & F for powder coated (minimum thickness of powder coating 50 micron) aluminium anodised ventilator shutters, fixed type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws,three track etc complete, as specified and directed. |
| 6 | S&F 4 mm thick sheet glass, ordinary quality, and sheet glass is ground or obscured or frosted on one side fixed in aluminium door/window/ventilator glazing with rubber beading complete all as specified and directed. |
| 7 | Dismantling timber scantlings in fillets, rails, post , rafter, purlin etc under 40 Sqcm in section in any position unframed work, complete all as specified and as directed at site. |
| 8 | M&L for 2nd Class hardwood plain fillets, square or triangular in section, clean swan, secured with nails or brads, croos sectional area exc 13 Sqcm but not exc 25 Sqcm complete all as specified and directed. |
| 9 | Dismantling boarding, any description, fixed with screws complete all as specified and as directed. |
| 10 | M& L 19 mm thick Block boards, grade 2 quality, interior grade, commercial type, fixed with screws to timber frame-work as in kitchen cabinet including fixed on wall by drilling and bolting etc complete all as specified and as directed. |
| 11 | M&L for 1.5 mm thick Decorative laminates type I, or surface finish, colour and pattern as approved, complete all as specified and as directed at site. |
| 12 | M& L for Two coatsFrench polishing on surfaces of any description, width or girth including cleaning and preparing the surface including a coat of wood filler on new works complete all as specified and as directed. |
| 13 | M & L for preparation of New or previously untreated wood and wood based surfaces of any description, not otherwise described, over 10 cm width or girth and applying two coats of Synthetic enamel paint (Ordinary tint) over a coat of Pink primer complete all as specified and as directed. |
| 14 | M&L forExtra over rates of block board or veneered particle board forexternal teak wood lipping, 6mm thick fixed with nails complete all as specified and as directed. |
| 15 | S&F Nickel plated Auto closing concealed Hydraullic Hingeswith two holes for cabinet doorsall as specified and directed |
| 16 | S&F 75mm stainless steelhandles, cast type, polished for cupboard shutters, etc. complete all as specified and as directed at site. |
| 17 | S&F 50mm stainless steelbutt Hinges, cast type, polished for cupboard shutters, etc. complete all as specified and as directed at site |
| 18 | S&F 50mm stainless steeltower bolt , cast type, polished for cupboard shutters, etc. complete all as specified and as directed at site. |
| 19 | S& FMild steel drawer slides complete all as per manufacturer instructions and as specified. |
| 20 | Extra over rate forForming groove of uniform size 10mm wide and 10mm deep in wooden batten for cupboard shutters complete all as specified and as directed. |
| 21 | Taking down Chowkats or frames not exceeding 1.5 Sq. M each (Without taking off shutters from the frames) and removingcomplete, complete all as specified and as directed at site. |
| 22 | S&F PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube suppling fixing in opening etc, complete all as specified and as directed at site. |
| 23 | S & F Factory Made Solid PVC Moulded Door Shutter with particle board core, 28 to 30mm thick(stiles), with 2, 4, or 6 raised panel design with 2mm thickMoulded PVC Sheet on the front face & 2mm plain colour PVC sheet on back face, supplying & fixing in frame at site as per specification& drawing . |
| 24 | S&F 100 mm Butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type B-21 and fixed to PVC Doors complete all as specified and as directed. |
| 25 | S&F 125 mm long aluminium anodised barrel tower bolt of extruded section and fixed complete all as specified and as directed. |
| 26 | S&F 125 mm long extruded aluminium alloy handles, fabricated type, anodised complete all as specified and as directed. |
| 27 | Taking down and removing to or from stores Chowkats or frames exceeding 1.5 Sq. M but not exceeding 4 Sq. M each (Without taking off shutters from the frame) and removing, complete all as specified and as directed at site. |
| 28 | Taking down shutters of any description exc. 1 Sqm but n exc 2.00 sqm each complete all as specified and directed. |
| 29 | Taking down shutters of any description exc. 2.0 Sqm each complete all as specified and directed. |
| 30 | S & F Second class hard wood plain, solid, straight chowkats and frames, wrought, framed, rebated on the solid, rounded or chamfered, put together with glue pinned at joints, complete all as specified and as directed at site. |
| 31 | S & F Mild steel Angles, bars, flats etc., as in supports for stiffening of fencing, wall ties, hold fasts, clamps and similar small articles confirming to Fe 410-O 0r Fe 310-O, complete all as specified and as directed at site. |
| 32 | S & F 35 mm thick FACTORY MADE plain, framed, panelled shutters ( two panels), with lock rail and panels of 9mm BWP commercial ply or 12mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS: 1003 (part-I), kiln seasoned and chemically pressure treated supplied and fitted to chowkats. |
| 33 | S&F 35 mm thick 2nd class hard wood gauzed and skeleton shutters for doorsopen rebated and prepared to receive glass, gauge etc., divided into square with plain chamfered or rounded mitered and rebated sash bars, any number, edges of framing, plain, chamfered or rounded, fitted with cut and mitred beads for securing glass etc, size of members of shutters all as specified in SSR Part-I Section 8 clause 8.20 (a) complete all as specified and as directed. |
| 34 | S & Fstainlesssteel wire cloth, 0.36 mm nominaldia of wire and average width of aperture 1.4 mm and fixed with wooden beeds, complete all as specified and as directed at site. |
| 35 | M & L for preparation of new or previously untreated wood and wood based surfaces of any description, not otherwise described, over 10 cm width or girth and applying two coats of synthetic enamel paint (ordinary tint) over a coat of Pink primer complete all as specified and as directed. |
| 36 | S & F 100 mm long medium weight, cold rolled mild steel Butt hinges, complete all as specified and as directed at site. |
| 37 | S&F 150 mm length of extruded aluminium alloy handles, fabricated type, anodised, complete all as specified and as directed at site. |
| 38 | S&F 150 mm length of aluminium anodised barrel tower bolts of extruded section and fixed, complete all as specified and as directed at site. |
| 39 | S & F for alluminium alloy, anodised,sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed, length of bolt 300 mm complete all as specified and directed. |
| 40 | S&F 300mm, ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and as directed. |
| 41 | S & F 150 mm long floor door stopper of aluminium alloy body, and tongue, ISI marked, anodised, with hard drawn steel spring, fixed in floor all as specified and as directed |
| 42 | S&F curtain rod 25mm dia MS decorative type powder coated complete all as specified and directed. |
| 43 | S&F25 mm diaMS brackets to curtain pipe, decorative type powder coated complete all as specified. |
| 44 | Dismantling Stone slabs and tiles of any description or thickness in floors,plinth protection, aprons etc Laid, bed-ded and pointed in any mortar,complete all as specified and as directed. |
| 45 | M&L 20mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed. |
| 46 | M&L for rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations complete all as specified and directed. |
| 47 | Taking down cement plaster on wall of any description incl racking out joints for key, scrubbing with water etc. complete all as specified and directed. |
| 48 | M & L for rendering 15mm thick in cement mortor 1:4 on concrete or brick wall surfaces, finished even and smooth without using extra cement, mixed with WPC @ at 3% by weight of cement (IWPC measured and paid separately) complete all as specified and directed. |
| 49 | Supply only integral water proofing compound, complete all as specified and as directed at site. |
| 50 | M & L for rendering 10mm thick in cement mortor 1:6 on Brick wall surfaces, finished even and smooth without using extra cement complete all as specified and directed. |
| 51 | M&L for two coats of oil bound distemper over a coat of alkali resistant primer on newly plastered surfaces of walls including 3mm thick wall care putty on wall and preperation of surface complete all as specified and directed. |
| 52 | M&L for preparing new plastered surfaces of walls and applying Two coats of cement based paintover a coat of alkali resistant primer complete all as specified and directed. |
| 53 | M&L for rendering 5mm thick in CM (1:3) as in ceilings, concrete surfaces finished even and smooth (without using extra cement) complete all as specified and directed. |
| 54 | M&L for preparation of new ceiling surfaces and applyingthree coat of white wash, complete all as specified and directed. |
| 55 | M&L for Praparation of old plastered surfaces and applying One coat of White wash on Ceiling complete all as specified and directed by Engr-in-Charge. |
| 56 | Preparation of old painted steel surfaces of any description, over 10 cm width or girth, not otherwise described and applying one coat of synthetic enamel paint. |
| 57 | M&L for preparation of old painted wood and wood based surfaces of any description, not otherwise described, over 10 cm width or girth and applying one coat of Synthetic enamel paint (Ordinary tint). |
| 58 | M&L for complete removal of existing treatment and applying two oil bound distemper over a coat of alkali resistant primer on old surface of walls including 3mm thick wall care putty complete all as specified and directed. |
| 59 | M&L for complete removal of existing treatment and applying two coats of cement base paint on walls surfaces complete all as specified and directed. |
| 60 | Demolition of cement concrete (unreinforced) of any description of any position not otherwise specfically provided for as in sunken floors & floor etc |
| 61 | Dismantling floor, hearth or wall tiling incl cement mortar bedding (but not backing) and rubbish of the premises complete all as specified and directed by Engr-in-Charge. |
| 62 | M&L for 25mm thick cement concrete (1:2:4) type B0 (using 12.5mm graded stone aggregate) as in sub-base and finished surface even and smooth without using extra cement, complete all as specified and directed. |
| 63 | M&LVitrified Ceramic light shade tiles 9 to 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match flooring( in any pattern) andjointedwith coloured cement matching with surfaces of tiles as in floor 15 mm thickcement screed in CM 1:6 and pointed with coloured cement matching with surfaces of tiles as in floor complete all as specified and directed complete all as specified and directed |
| 64 | All as per Sl item No.63above but for vertical surfaces such as skirting, dados and riser to steps over 10mm thick backing coat in cementplaster 1:3 finished even and fair to receive tiles complete all as specified and directed |
| 65 | M&L for non skid coloured ceramic tiles 7 to 8mm thick (square or rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, as in floors etc., laid over and including 15mm thick cement screed bed or bedding layerin CM (1:6), tiles jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles, compelte all as specified and directed. |
| 66 | M & L for glazed ceramic tiles in vetical surfaces, size of tile 300mmx200mmx7mm thick laid over 10mm thick back coat in CM (1:4), set and jointed in neat cement slurry and pointed in white or colour cement to matchthe colour of tiles, complete all as specified and directed. |
| 67 | Taking down 15mm bore steel tubing and connections in any position, Complete all as specified and directed. |
| 68 | Taking down 20mm bore steel tubing and connections in any position, Complete all as specified and directed. |
| 69 | M&L for 15 mm bore GI Tubing medium grade with all fittings fixed to wall/ ceiling or in floor complete as specified and directed. |
| 70 | M&L for 20 mm bore GI Tubing medium grade with all fittings fixed to wall/ ceiling or in floor complete as specified and directed. |
| 71 | S&F rotational moulded polyethylene water storage tank triple layer (cylindrical vertical with closed top) of 1000 ltrs capacity hoisted and fixed in position all as specified including dismantling old tank complete all as specified and directed. |
| 72 | S&F 20 mm dia brass ball valve, high pressure with polythene float and fly-nut complete, screwed for iron pipe or brass ferrule fixed in repair complete all as specified and directed. |
| 73 | S&F in repair 20 mm dia Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed. |
| 74 | S & Fin repair 15mm bore Bib taps, chromium plated cast copper alloy but fancy type, screwed down, screwed for iron pipe or for brass ferrule complete allas specified and directed. |
| 75 | S&F in repairs 15 mm diafancy type stop valves/ angle cock chromium plated screwed down, high pressure,screwed both ends for iron pipe or for unions and fixed complete allas specified and directed. |
| 76 | S & F in repair 125mm size brass chromium plated shower rose with or without swivel joints including fixing to steel pipe or union fixed complete all as specified and directed. |
| 77 | S&F in repair health faucet with spray jet (hand shower) chromium plated including all fittings fixtures complete all as specified and directed. |
| 78 | S&F in repair brass CP mixer for mixing hot & cold water screwed down for iron pipe and fixed complete all as specified and directed. |
| 79 | S&F in repair two way bib tap / cock 15mm bore, chromium plated, fancy type complete all as specified and directed. |
| 80 | S&F for wash down water closet (pedestal pattern) complete white withplastic water closet seat, black, closed pattern with flat bottom and cover and mild steel chromium plated or aluminised hinging device and flush pipe of polythelene of low or density or PVC 32mm dia for low level flushing cistern incl pedestal pan and trap, and connection to drain (or outgoing pipe) complete |
| 81 | S&F for vitreous china wash basin, white, flat back size 550 x 400mm including 01 Nos cast copper alloy 15mm CP fancy type pillartap, 01 Nos 32mm waste coupling , one pair of MS bracket, cuttingfor and pinning in ends of brackets complete all as specified and directed. |
| 82 | Supply and fix PVC valveless syphonic action type flushing cistern 10 lit capacity low level white with inlet, ball valve, float and handle including brackets and32mm PVC flush pipe complete all as specified and directed. |
| 83 | S&F in repairs PVC connection 15mm dia, 45 Cms long with brass ferrules on both ends fixed complete all as specified and directed. |
| 84 | S & F brass chromium plated tubular towel rail 20 mm dia ‘D’ type 60 cm long between flanges ofbrass chromium plated complete all as specified and directed. |
| 85 | Supply and Fix PTMT Shelf of weight not less than 300 gms with soap dish (tray) fixed with and including Chromium plated brass screws and wooden / plastic cleats etc., complete all as specified and as directed. |
| 86 | S&F 600mmx450mm belvelled edge looking mirror of selected quality glass, mounted on 6mm thick AC building board or commercial plywood with PVC / alluminium frame and fixed to wooden plugs with chromum plated brass screws, cup washers, complete all specified and directed. |
| 87 | S&F in repair 550mmx350mm PVC Cabinet Mirror with shelves of selected quality glass and fixed on walls to wooden plugs with chromium plated brass screws, cup washers complete all specified and directed. |
| 88 | S & FPVC( SWR ) pipes 110mm dia single socketed , in any lengthwith rubber ring joints as rainwater, soil waste and vent pipe (with all fittings) fixed to wall or laid in trenches incl taking down existing pipe complete all as specified and directed. |
| 89 | S & FPVC( SWR ) pipes 75mm dia single socketed , in any lengthwith rubber ring joints as rainwater, soil waste and vent pipe (with all fittings) fixed to wall or laid in trenches incl taking down complete all as specified and directed. |
| 90 | S&F in repair PVC (SWR) bends any radius 110mm bore complete all specified and directed. |
| 91 | S&F in repair PVC (SWR) bends with access door any radius 110mm bore complete all specified and directed. |
| 92 | S&F PVC (SWR) junction single (single T) equal or unequal with access door of bore 110mm complete all specified and directed. |
| 93 | S&F PVC(SWR) vent cowl 110mm bore complete all specified and directed. |
| 94 | S&F PVC (SWR)bends any radious 75 mm dia complete all specified and directed. |
| 95 | S&F PVC (SWR)bends with access door any radious 75 mm dia complete all specified and directed. |
| 96 | S&F PVC (SWR) junction single (single T) equal or unequal of bore75mm complete all specified and directed. |
| 97 | S&F PVC (SWR) junction single (single T) equal or unequal with access door of bore75mm complete all specified and directed. |
| 98 | S&F in repair PVC (SWR) floor trap 75mm dia outlet, plain with grating including jointing with solvent cement complete all specified and directed. |
| 99 | S&F for PVC waste pipe for urinal/WHB with fitting etc 38 mm dia. 60mm long complete all specified and directed. |
| 100 | Demolition of brick work or stone/ boulder masonry, built in cement mortar including all quoins, pillars etc., complete all as specified and directed. |
| 101 | M & L for brick work with sub-class `B\" bricks, straight or curved on plan exceeding 6 M mean radius built in cement mortar 1:6 complete all as specified and directed. |
| 102 | Excavating post holes or similar holes, each not exceeding 0.5 Cum, getting out in Hard/ Dense soil, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm, watering, and removing surplus soil |
| 103 | M&L for plain Cement Concrete Type B1 1:2:4 (using 20 mm graded stone aggregate) in foundation filling, mass concrete and similar works and for MS Pipe fixing. |
| 104 | S&F MS Plain plates, square cut, with riveted, bolted or welded attachment Fe-410-W (Gde-E-250) quality A as specifed |
| 105 | M&Lfor Steel work in tubular trusses, purlin, rafter & vertical post including special shaped washer etc using ERW or induction butt welded tubes conforming to I.S. 1161-1979 grade st-240 complete all as specified and directed. |
| 106 | M & L for preparation of new or previously untreated steel surfaces of any description, over 10 cm width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer complete all as specified and as directed. |
| 107 | M & L pre-painted galvalume aluminium zinc coating GI based corrugated sheet 0.50 mm thick of any colour having tensile strength 550 mpa as in roof covering/ cladding to wall, fixed with self tapping screws complete all as specified and directed. |
| 108 | Taking down carefully existing point wiring of any description for (light, fan ,sockets bells etc) complete including fittings such as sunken boxes, switches, sockets, ceiling rose, lamp holders, brackets ,fittings, pendants, fan regulartors etc and making good the disturbed surface of walls, floors etc. all as specified and directed. |
| 109 | Taking downexisting sub main wiring /Service wire of any description and size including earth wire, batten, conduits and making good the disturbed surfaces ofwalls, floors etc. |
| 110 | M & L for providing point wiring with 1.5 sq. mm (nominal area) single core PVC insulated FRLS unsheathed multi-stranded copper conductor cable (maintaining colour code), 1100 volts grade in and includingnon metalic rigid PVC conduit medium grade with appropriate size with all fittings (ISI Marked) suitable for concealed wiringon stone/brick, masonary walls, roof etcincluding modular sunken box of adequate size with suitable modular plate cover for mounting modular switches, sockets, regulators, light fittings etc. complete with all fittings and accessories fixed to wall/ ceiling for one light/ fan /bell point controlled by one oneway modular switches including one run 1.5 sqmm (nominal area) PVC insulated FRLS unsheathed multi-stranded copper conductor cable green in colour for earth continuity conductor connected to common earth dolly including cutting/running chases, pinning in and making good the disturbed surfaces to match with the existing specification, complete all as specified & directed at site. |
| 111 | All as per Item No.110 abovebut one 5 Amps 3/5 pin modular socket outlet on independent board complete all as specified and as directed at site. |
| 112 | All as per Item No.110 above but for one 3/5 pin 5/6 Amps modular socket outlet point on same board with other switches complete all as specified and as directed at site. |
| 113 | All as per Item No.110 but for One 3 pin 15 / 16 Amps modular switch socket outlet point on independent board with 2.5 sqmmPVC (FRLS) insulatedunsheathed copper conductor single core multi stand flexible cable and 2.5 sqmm PVC (FRLS) insulated unsheathed copper conductor single core cable (green colour) as earth lead complete all as specified and directed at site. |
| 114 | S&F in repair Ceiling rose surface bakelite 65 x 50 mm 2/3 terminals complete all as specified and directed at site. |
| 115 | S&F in repair Modular switch, single pole, one way, 6Amps one module complete all as specified and as directed. |
| 116 | S&F in repair Modular 6A 3 pin universal socket outlet, 2 module complete all as specified and as directed. |
| 117 | S&F in repair Modular switch, single pole, one way, 16Amps one module complete all as specified and as directed. |
| 118 | S&F in repair Modular socket outlet 2-in-1, 6/16 Amps, 2 module complete all as specified and as directed. |
| 119 | S&F in repair modular stepped type electronic fan regulator 220 volts, 100Wattcomplete all as specified and as directed. |
| 120 | S&F in repair modular bell push 6 Amps 1 module complete all as specified and as directed. |
| 121 | S&F in repair 9 W LED bulb of base B22d with color temp 6500K all as specified and directed. |
| 122 | S&F in repair Factory made board distribution in sheet steel enclosure vertical single door with 200 Amps ratedbus bar, TPN, 4 ways, 240 Volts suitable for housing MCBsas incomer and SP MCBsas outgoing complete all as specified and as directed. |
| 123 | S&F in repair Sheet metal enclosure MCB distribution board including 200 Ampsbus-bar single pole and neutral 240V, 8 Ways, double door including taking down of existing sheet metal enclosure complete all as specified and directed at site. |
| 124 | S&F in repair Sheet metal enclosure MCB distribution board including 200 Ampsbus-bar single pole and neutral 240V, 4 Ways, double door including taking down of existing sheet metal enclosure complete all as specified and directed at site. |
| 125 | S&F in repair MCB,Four pole,240 volts, 63 Amps 10 KA C curve complete all as specified and as directed. |
| 126 | S&F in repair 240V, 10 KA \"C\" curve miniature circuit breaker (MCB) of SPN and current carrying capacity 32 AMP, in the MCB DB Complete with connection testing and commissioning. |
| 127 | S&F in repair 240V, 10 KA \"C\" curve miniature circuit breaker (MCB) of single poles and current carrying capacity 5 to 32 AMP, in the MCB DB Complete with connection testing and commissioning complete all as specified and directed at site. . |
| 128 | M&L for Submain wiring with two single core PVC (FRLS) insulated flexible copper conductor cable of size 6 Sqmm and one single core PVC (FRLS) insulated unsheathed flexible copper conductor cable green colour of size 6.0 Sqmm as earth lead in and including PVC conduit medium grade/casing caping with all fittings suitable for concealed/surface type and making good the disturbed wall surfaces to match with existing specification all as required at site complete all as specified and directed at site. |
| 129 | S&F 25W energy saving and environmental friendly long life LED building security street light made up of pressure die cast aluminium housing with high power LED, lens & toughened glass, potted driver, IP 66 protection including connection with twin twisted unsheathed PVC copper cable of suitable size complete all as specified and directed.Make : Havells Cat No.ENDURASUNDOWNSL25WLED765PASYBOPC or equvalent model in Wipro / Philips. |
| 130 | Earthing complete with galvanized steelearth plate electrode 60cmx60cmx6mm thick buried directly in ground (earth pit not less than 2.25 mtr below ground level) with top edge o the plate not less1.5 mtrs below normal ground level connected to galvanised earth lead wire 4 mm dia by means of bolts nuts, check nuts and washers of galvanized iron of steel all as shown in electrical plate No.3 connected to earthing test point incl necessary earth work, excavation PCC 1:3:6 type CI using 20mm graded stone aggregate for earth chamber provn of PCC cover 40 mm thick 1:2:4 mm type B1 funnel with water Pipe, GI pipe, 15mm dia medium grade protection pipe, GI earth lead complete all as specified and directed by the Engr-in-charge. |
| 131 | S&F 22 W decorative wall mounted LED batten with aluminium housing and integrated electronic diriver connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed at site.Make : Havells Cat No. LUMILINEPLUSNEOBS22WLED865SPCSSINDS or equivalent model in Wipro / Philips. |
| 132 | S&F 10 W decorative wall mounted LED batten with aluminium housing and integrated electronic diriver connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed at site.Make : Havells Cat No. LUMILINEPLUSNEOBS10WLED865SPCSSINDS or equivalent model in Wipro / Philips. |
| 133 | S&F Floretine Decorative, wall mounting, brushed nickel finish fixture with Opal Glass diffuser suitable with 9 W LED lamp B22 base. complete all as specified and directed at site. Make : Havells Cat No. LHFOAJE1TZ1I060 or equivalent model in Wipro / Philips. |
| 134 | S&F 18W surface mounted pressure die cast aluminium luminaire LED round downlighter with premium diffuser to ensure glare free & even light distribution including necessary connection all as specified and directed at site. Make : Havells Cat No. EDGERDDLSUR18WLED840SG2 or equivalent model in Wipro / Philips. |
| 135 | S&F ATHENA 3 (MOON) gate light made up of high grade unbreakable polycarbonate material suitable for retrofit LED lamp B22 base having dimensions of dia 230mm, height 328mm and mounting pole dia 60mm (max) including 20W LED Bulb complete all as specified and directed at site. |
| 136 | S&F in repair LED light fittings, 1x10 watts bulk head luminairesetc complete with all accessories and including connecting up with twin core twisted flexible PVC copper conduct cabe of 23/0.0076 from ceiling rose all as specified.Make : Havells / Wipro / Philips |
| 137 | S&F in repair single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole 20 Amps MCB complete all as specifed and directed at site. |
| 138 | S&F in repair bell ding dong AC single pole 230 volts complete all as specified and as directed at site. |
| 139 | Supply and fix exhaust fan, steel body AC single Phase. 230V of size 300m sweep with, blades, and frame and louvers.Make : Havells / Bajaj / Philips |
| 140 | Supply and fix exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 250mm.Make : Havells / Bajaj / Philips |
| 141 | Supply and fix wall fan 240V, 400mm sweep with all fixing arrangement complete all as specified and directed. |
| 142 | Supply and fixing ceiling fans complete with blades, down rods and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC).Make : Atomberg / Havells / Philips |
| 143 | Supply and fix Chimney electrical with dual side touch control high suction 1800 cum/hr filterless autoclean technology with high glow front LED strips and motion sensor of size 90cm complete all as specified and directed.Make : Glen / Faber / Elica |
| 144 | S&Felectric water heater, storage type steel body with foroglas coated inner container and heating coil upto 2 KW, 8 bar pressure capacity of 25 litre, BEE 5 star rated complete with all accessories such as safety valve, thermostate, NRV, connection piece, setting automatic operation of water heater for timely On/Off of temp preferences, digital temperature display ad provide 7 years warranty for tank, 5 years for coil etc., and 04 No\"s grouting bolts, nuts & washers grouted on stone wall and making good the distributed groute surface complete all as specified and directed at site.Make : Havells Model Magnatron or equivalent model in Bajaj and CG. |
| 145 | Supply and fix exhaust fan 240V, 300mm Sweep, metalic body complete with all fixing arrangement at site. (Note: Cost for cutting holes and making good the disturbed surfaces shall be deemed to be included the quoted rate.)Make : Havells / Automberg / CG |
| 146 | M&L Point wiring for one ceiling / exhaust fan point controlled by one switch with 1.5 sqmm multistrand copper conductor cable PVC (FRLS) insulatedunsheathed copper conductor single core multi stand flexible cable and 1.50 sqmm PVC (FRLS) insulated unsheathed copper conductor single core cable ( green colour) as earth lead in and includingnon metalic rigid PVC conduit medium grade with appropriate size with all fittings (ISI Marked) suitable for concealed wiringon stone/brick,masonary walls,roof etc including in new /old CI/MS sunk box of required size and all as directed by Engineer-in-Charge & 2 mm thick plastic laminated sheet for housing switches sockets, regulators etc, including making good the disturbed surfaces to match with the existing specification ,complete all as specified and directed at site . |
| 147 | M&L point wiring for one3 pin 15/16 Amps switch socket outlet point on independent board with 4 sqmm PVC (FRLS) insulated unsheathed copper conductor single core multi strand flexible cable and 4 sqmm PVC (FRLS) insulated unsheathed copper conductor single core cable (green colour) as earth lead in and including PVC rigid conduit with all fittings for concealed type on stone/brick, masonary walls, roof ets., including new CI/MS sunken box of required size and all asdirected by Engineer-in-Charge & 3mm thick plastic laminated sheet for housing switches sockets, regulatots etc., including cutting/running chases, pinning in and making good the distributed surfaces to match with the existing specifications, complete all as specified and directed at site. |
| 148 | M&L switch piano flush type single pole one way 5 Amps complete all as specified and directed. |
| 149 | S&F Socket Outlet 3 pin 15 Amps flush type complete all as specified and directed. |
| 150 | S&F Switch piano one way 15 Amps flush type complete all as specified and directed at site. |
| 151 | S & F stepped type electronic fan regulator flush type on the existing phenolic laminated sheet etc. as reqd. |
| 152 | S&F fan hook suitable for hanging of ceiling fan made out ofmild steel flat 40x5mm clamp or 12mm dia round bar duly welded/drilled including nuts, bolts and washers and cutting /chisseling, making good disturbed surfaces with cement mortar 1:3and matching the surfaces by painting complete all as specifed and directed at site. |
| 153 | S&F bib tap chromium plated, cast copper alloy with crutch or butterfly handle, screwed for iron pipe size of 15mm diaconnect to outlet GI pipe line including necessary plumbing works, civil works complete all as specified and directed at site. |
| 154 | S&F 240V, 10KA \"C\" curve miniature circuit braker (MCB) of SPN and current carrying capacity of 32 Amps in the MCB DB complete with connection testing and commissioning all as specified and directed at site. |
| 155 | S&F 240V, 10KA \"C\" curve miniature circuit braker (MCB) of SP and current carrying capacity of 5 to 32 Amps in the MCB DB complete with connection testing and commissioning all as specified and directed at site. |
| 156 | S&F Sheet metal enclosure MCB distribution board, including 200 Amps busbar single pole and neutral 240V, 4 ways, double door complete all as specified and directed at site. |
| 157 | M&L Submain wiring with 2 runs of4 sqmm single core, PVC insulated, unsheathed 1100 Volts grade, multistranded, copper conductor cables (FRLS quality) drawn through newly laid PVC casing capping/conduit, fixed on walls /ceiling including 4 sqmm PVC insulated, unsheathed, multistranded, copper conductor, single core cable as earth continuity wire complete all as specified and directed at site.Note: (i) Two runs of cable and one run of earth wire shall be measured as one run length, (ii) Earth wire shall run inside the same casing capping/conduit, (iii) Cost of PVC casing capping/conduit deemed to be incl in the quoted rate. |
| 158 | S&F Galvanized steel water tubing medium grade of 20mm bore complete on walls/floors with all fittings such as bends elbows, tees, short pieces, connectors, back nuts, diminishing pieces, caps and pigs, unions etc., including necessary excavationclips, wall hooks, wooden plugs etc and fitting with existing pipe line of any size complete all as specified and directed at site. |
| 159 | S&F Galvanized steel water tubing medium grade of 15mm bore complete on walls/floors with all fittings such as bends elbows, tees, short pieces, connectors, back nuts, diminishing pieces, caps and pigs, unions etc., including necessary excanation, clips, wall hooks, wooden plugs etc and fitting with existing pipe line of any size complete all as specified and directed at site. |
| 160 | S&F PVC connections 15mm size with PTMT nuts of length 600mm complete all as specified and directed at site. |
| 161 | S&F Stop valves, cast copper alloy chromium plated, screwed down, high pressure, withcrutch or butterfly handle, screwed both ends foriron pipe orfor unions and fixed of 15mm bore complete all as specified and directed at site. |
| 162 | S&F gunmetal globe on gate valve with iron wheel head screwed both ends for iron pipe of 20mm bore complete all as specified and directed at site. |
