|
| 1 | Design, Supply, Installation, Testing & Commissioning of the Slaughter House Processing Line in end-to-end EPC mode. The scope includes the integrated slaughter table with blood trough, carcass escalator, complete overhead rail conveyor system with in-line weighing, core processing machines (dehider, brisket saw, tripe cleaner), all operator platforms, hooks, cutlery, hygiene and cleaning stations, complete water and drainage systems, SS trolleys and inspection tables, electrical systems with MCC and earthing, ventilation, waste segregation, a 1000 kg meat chiller, auxiliary equipment for tagging, printing and stamping, and all other necessary auxiliary equipment, devices, and incidentals required for the complete, safe, and functional operation of the slaughterhouse—all delivered as a fully functional plant as per the Technical Specifications in Annexure C in SBD. |
| 2 | Design, Supply, Installation, Testing & Commissioning of a 10 KLD Effluent Treatment Plant (ETP) in end-to-end EPC mode. The scope includes a complete system comprising: all necessary tanks (Equalisation, Aeration, Treated Water, Secondary Clarifier, Flocculation, Nutrient Dosing, and Primary Clarifier with polydosing) in SS/Fibre(vinyl tster resin/MS FRP; screening and filtration units (Rotary/Bar Screen in SS 304, Pressure Sand Filter, Activated Carbon Filter, and Dual Media Pressure Filter in MS epoxy); a comprehensive aeration system with membrane-type EPDM diffusers and a floating aerator; a full pumping station with submersible, CI water, and sludge pumps (including PC Sludge Pumps 1W+1S); sludge handling equipment (Thickener and CI Filter Press); chemical dosing systems with HDPE tanks and pumps; complete instrumentation (Energy Meter, Digital Flow Meter, pH Meter); twin-lobe rotary air blowers (0.3 kg/cm²); an electrical control panel with distribution; and all interconnecting piping, valves, bio-fills, and accessories for a fully functional plant as per the Technical Specifications in Annexure C. |
| 3 | Design, Supply, Installation, Testing & Commissioning of a 0.5 KLD Blood Processing Unit (BPU) in end-to-end EPC mode. The scope includes a complete system comprising: a progressive feed pump (SS/rubber stator); an SS304 insulated blood tank with agitator; a steam-injected SS304 blood coagulator; a vibrating screen; a blood dryer with EN24 shaft and steam assembly; a hammer mill with reversible hammers; covered conveyor systems (2 units); an oil-fired electric boiler with calorific tank, air pre-heater, and FD fan; an MS chimney; a screw air compressor with receiver tank, dryer, and filter assembly; all necessary piping, fittings, gauges, and valves; and complete electrical panels with VFD drive for the blood pump—all supplied and integrated as a fully functional unit as per the Technical Specifications in Annexure C. |
| 4 | Design, Supply, Installation, Testing & Commissioning of a complete 62.5 kVA Backup Power Supply System in end-to-end EPC mode. The scope includes a CPCB IV+ compliant Silent Type Diesel Generating Set (415V, 3-Phase, 50Hz, 1500 RPM, 0.8 PF) with a turbocharged, water-cooled engine (ISO 8528 governor) and a brushless alternator with AVR (IP23, Class H insulation). The system comprises an acoustic IP65 enclosure, hospital-type silencer with catalytic converter, digital instrument panel, daily fuel tank with MS piping, and a comprehensive AMF Panel (IP42) with energy analyzer, PLC-based load management, protection relays, and BMS integration (Ethernet/RS485). This includes the supply and laying of a 3½ core 75 sq. mm armoured Aluminium XLPE cable in a trench. The job also includes: construction of an RCC platform (2.44m x 1.83m, M25/Fe500) as per IS 2974 with a 1:3 gradient ramp and a secured MS canopy with CGI roofing and wire mesh enclosure, and a dedicated earthing system per IS 3043. Complete with all foundations, fuel, first fills, and QR code documentation, the system shall be supplied as per CPWD guidelines and inline with Technical Specifications in Annexure C. |
| 5 | FIRE FIGHTING SYSTEMSupply, installation, testing & commissioning of Swinging type First-Aid fire hose reels wall mounting, fitted with of heavy duty mild steel construction with CI brackets, 25 mm dia. ball valve and 20 mm dia. x 30 m long high pressure Hose Reel tubing as per IS:444 with Stainless Steel shut-off nozzle having 5 mm dia. orifice. The hose reel shall strictly confirm to IS:884-1985. |
| 6 | Supply, installation, testing & commissioning of pressure gauges with isolation cocks and chrome plated copper pipes as hydrant station and other required points, to read pressure from 0-25 kg/cm2 complete and of dia 150 mm & connections if required. |
| 7 | Pipes and accessoriesInternal PipingProviding, laying, testing & commissioning of \"C\" class heavy duty MS pipe conforming to IS 3589/IS 1239 including Welding, fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc. and fixing the pipe on the wall/ceiling with suitable clamp/support frame and painting with two or more coats of synthetic enamel paint of required shade complete as required.80 mm Dia |
| 8 | 65 mm Dia |
| 9 | 50 mm Dia |
| 10 | 25 mm Dia |
| 11 | Providing and fitting of Rock wool insulation of thickness 50 mm for external piping and internal (exposed) held by chicken mesh along with aluminium cladding of 24 Gauge Min density 48 kg/cubic metre. |
| 12 | Supplying, fixing, testing and commissioning of butterfly valves (wafer end type class PN 1.6 as per IS: 13095-1991 or BS: 5155 ) with bronze/gunmetal seat duly ISI marked complete with flanges of suitable size and pressure rating, nuts, bolts, washers, gaskets conforming to IS 13095 of following sizes as required:80 mm Dia |
| 13 | 50 mm Dia |
| 14 | Providing, installation, testing and commissioning of stainless steel Y-strainer fabricated out of 1.6 mm thick stainless steel, Grade 304, sheet with 3 mm dia holes with stainless steel flange.Nominal dia of terrace pump |
| 15 | Providing and laying Cement concrete (1 cement : 2 coarse sand : 4 graded stone aggregate of nominal size 20 mm in thrust blocks at bends, tees etc and also as support to vertical pipes (wherever required) centering and shuttering etc complete in all respects. |
| 16 | Providing and fixing Resilient rubber neoprene lined single arch vibration eliminators suitable for raw water upto 45°C temperature working pressure 7 kg/cm2 and test pressure 16.0 kg/cm^2 with unit control including nuts, bolts matching flanges (screwed or welded) complete with 1.5mm thick compressed asbestos gasket of same rating.Nominal bore suitable for terrace pump (450 lpm) |
| 17 | Supply, installation, testing and commissioning of electrically operated water flow switches of (Vane type) including all accessories, complete required.Nominal Dia. |
| 18 | Supplying and fixing Orifice plate (Pressure Reducing Valve) made out of 6 mm thick stainless steel (Grade 304) with orifice of required size to be fitted between flange & hose reel to reduce pressure at the outlet to the level of 3.5 kg/cm complete as required. |
| 19 | Providing Fitting, testing & commissioning of gun metal ball valve for flushing connection, inclusive of all necessary fittings as required.25 mm Dia |
| 20 | 50 mm Dia |
| 21 | 80 mm Dia |
| 22 | Supply, installation, testing & commissioning of 25 mm dia automatic air release valves sprinkler ring main as per standard fire practice with 25 mm isolation valve, including all accessories as per requirement. |
| 23 | Providing, supplying and installation of triple-layer HDPE tank, complete with all necessary inlet, outlet, overflow and drain connections, to be installed on a properly designed and constructed foundation of suitable size near the pump room, including all fittings, fixtures and accessories, complete in all respects.5000 L |
| 24 | 2000 L |
| 25 | 1000 L |
| 26 | FIRE PUMP & ACCESSORIESSupplying, installation, testing and commissioning of electric driventerrace pump 450 lpm at 35 m head suitable for automatic operation and consisting offollowing, complete in allrespects, as required: (Terrace Pump)(B) Horizontal type, multistage, centrifugal, split casing pump of castiron body & bronze impeller with stainless steel shaft, mechanicalconfirming to IS:1520(C) Suitable HP squirell cage induction motor TEFC type suitable foroperation on 415 volts, 3 phase, 50 Hz, AC supply with IP55 class ofprotection for enclosure, horiziontal foot mounted type with Class-\"F\"insulation, conforming to IS-325.(D) M.S. fabricated common base plate, coupling, coupling guard,foundation bolts etc. as required.(E) Suitable cement concrete (1;2;4 )foundation duly plastered and with antivibration pads.The Job also Include providing & Installing a Control Panel for Terrace Pump& circulation pump for feasible automatic operation in sync with fire fighting operations. & includes electrical works like MCCB, relays, interconnection, cables, voltmeter, etc as required for smooth functioning of the pumps as per EIC. |
| 27 | Providing, fixing, testing and commissiong of double flanged vertical air vessel fabricated from 10mm MS plate with dished ends from 10mm MS plate, outside with one coat of primer and two coats of synthetic enamel paint of approved shade, complete with approved quality of pressure switches, pressure gauge and all other required accessories to operate commonly main fire pump, ( Diesel pump or as required) and Jockey pump at drop of pressure, automatically at required pressure setting.Recommended dia. : as per requirementHeight of shell : as per requirementWorking pressure : 5.5 kg/sq-cmTest Pressure : 150% of the working pressure |
| 28 | Earthing (as Per IS 3043)Providing earthing station with GI Earthing Plate (600 x 600) mm, 6 mm thick for pumps and MCC panels including excavation, CI manhole cover and frame complete as required and as per IS & IE rules. |
| 29 | GI Strip of size 25 x 6 mm G or as per requirement |
| 30 | Providing and fixing pressure switch in MS pipe line (for operation at 0-25 kg/cm2) including connections etc as required with fittings and accessories complete in all aspects. |
| 31 | Structural steel work in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. Riveted/bolted/Welding at various locations for supporting electro-mechanical equipment, Valves and other items. |
| 32 | Supply, installation, testing and commissioning of 0.5 HP centrifugal water pump conforming to relevant standards, suitable head and discharge, including necessary piping with valves, bends, unions, strainer, pressure gauge etc duly aligned, tested and made fully operational, complete in all respects. |
| 33 | Providing and fixing liquid level controller for fire pump to cut off in case low level of water in tank including cables, pannel etc. and making necessary connection to panel and commissioning. |
| 34 | Providing & Laying of electrical cables as per size given 1.1 KV 4 Core x 35 Sq mm Al (XLPE insulated armoured) Cable including glands, lugs, dressing and clamping on cable tray/wall.Note: FR/FS/FRTLS/LSZH where ever applicable. |
| 35 | Supply & Installation of 100 mm wide X 50 mm depth X 1.6 mm thickness M.S cable perforated trays painted with powder coating with perforation not more than 17.5% in convenient sections, joined with connectors, suspended from the ceiling with M.S suspenders including bolts & nuts, painting suspenders etc as required. |
| 36 | Fire ExtinguishersProviding and Fixing of ISI marked (IS:15683:2006) portable CO2 type fire extinguisher type 4.5 kg capacity, including valve, discharge hose of not less than 10 mm dia and 1 metre long complete in all respects including initiall filled CO2 gas confirming to IS : 307 - 1966 & filled to a filling rate of not more than .667 and wall suspension bracket. |
| 37 | Supply and installation of Dry ABC extinguishers bearing IS:15683 marking fixing to wall including brackets etc of 6 kg capacity with a warranty period of 6 years .It Shall have simple squeeze grip activation mechanism which allows to control the discharge and optimise use of the extinguishing agent.and also should have combination of mono ammonium phosphate (MAP-90) and ammonium sulphate, ABC Dry Powder should not only cut off oxygen supply to the fire but also interferes with the chemical reaction necessary to sustain a fire and fights Class A, B, C and electrically started fires. |
| 38 | Providing and fixing of fire bucket stands for Buckets at designated locations.MOC; MS |
| 39 | Providing and fixing of fire buckets of 9 Litre capacity to the stands..MOC ; Al |
| 40 | Providing of fire exit signages. This sign may be used to indicate all exits which can be used in the event of an emergency . It shall be accompanied by an arrow in green color with white background Please Enable Macros to View BoQ information |
