|
| 1 | Providing and fixing double scaffolding system (cup lock type) on the exterior side of building/structure, upto 25metre height, above ground level, including additional rows of scaffolding in stepped manner, as per reuiqurement of site, made with 40mm dia M.S. tube, placed 1.5metre centre to centre, horizontal and vertical tubes joint with clamps and maintaining it in a serviceable condition for execution of work of cleaning and/or pointing and/or applying chemical and removing it thereafter. The scaffolding system shall be stiffened with bracings, runners connecting with the building etc, wherever required, if feasible, for inspection of work at required locations with essential safety features for the workmen etc, complete as per directions and approval of engineer-in-charge. |
| 2 | Scraping of old white or colour wash including refusal of dismantled material up to 60.0mtr distance as per direction by engg-in-charge. |
| 3 | 12mm cement plaster of mix : 1:3 (1 cement : 3 coarse sand) finished with a floating coat of neat cement.(SOr-Ch no.13-613.9.1) |
| 4 | Finishing walls with Putty approved brand and manufacture and of required shade on umdacorated wall surface to give even shade over including curing and cost of all material, labour, T&P etc. required for proper completion of work. |
| 5 | Finishing walls with exterior emulsion paint (Apex) of approved brand and manufacture and of required shade on undecoarated wall surface to give even shade over @ 1.25Ltr/10Sqm including one coat of primer apllied @ 0.75Ltr/10Sqm coat curing and cost of all material, labour T&P etc all complete. |
| 6 | Applying priming coat over new steel and other metal surface upto 10cm in width or girth or small not exceeding 0.10 Sq.M. area after and including preparing the surface by thouroughly clearing oil, grease, dirt and other foreign matter and scoured with wire brushd, fine stell/wood, scrapper and papering and knotting including cost of all materials, labour T&P etc all complete. |
| 7 | Providing and fixing glass panes with putty and glazing clips in steel doors, window, clerestory windows, all complete with:25.0mm thickness panes |
| 8 | Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer usinf structural steel etc as required in gratings, frames, guard bar, ladder, railings, brackets, gates and similar work etc all complete. |
| 9 | Earth work in surface excavation not exceeding 30cm in depth but exceeding 1.5 m in width as well 10 sqm on plan including getting out and disposal of excavated earth upto 50 m and lift upto 1.5 m ,as directed by engg-in-charge:2.1.1 All kinds of soil. |
| 10 | Construction of granular sub base (GSB) by providing coarse graded material, spreading in uniform layer with mortor grader on prepared surface, mixing by mixin place method with rotovator at OMC and compacting with viberatory roller to achieve the desired density as per clause 401. |
| 11 | Reinforced cement cocrete work in walls (any thickness), including attached pilasters, buttreses, plinth and string courses, fillets & in coloumns, pillars, piers, abutments, posts and struts etc. above plinth level up to floor five level, excluding cost of centering, shuttering finishing and reinforcement in 1:1.5:3 (1 cement : 1.5 coarse sand (zone-iii) : 3 graded stone aggregate 20mm nominal size). |
| 12 | Reinforced cement concrete work in beam, suspended floors, roofs having slope up to 15\" landing, bolconies, shelves, chajjas, lintels , bands, plain, window sills, stair cases and spiral stair cases above plinth up to floor five, level excluding the cost of centering, shuttering, finishing and reinforcemen, with 1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded). |
| 13 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all completeupto plinth level. Thermo mechanically treated bars of grade Fe-500D or more. |
| 14 | Brick work with common burnt clay (non modular) bricks of class-150 in super structure above plinth level up to floor V level in all shapes and sizes cement mortar 1:4 (1 cement : 4 coarse sand) |
| 15 | 12mm cement plaster of mix : 1:3 (1 cement : 3 coarse sand) finished with a floating coat of neat cement. |
| 16 | Providing, laying and jointing of 300mm dia R.C.C. NP-2 hume pipe with all charges complete. |
| 17 | Construction of manhole chamber of 0.60x0.60x0.90m internal size with b/w, plaster, cover, C.I. sheet, labour T&P etc required for proper completion of work. |
| 18 | Supply and fixing of brass cock 15mm dia 400 gm heavy quality (Gem mikadeo/Encess\"s William in all complete.(Ch-2318.49 si no.) |
| 19 | Providing and fixing C.P. brass stop cock (concealed) of approved quality:15mm nominal bore |
| 20 | Providing and fixingmvitreous china dual purposal closet suitable for use as squatting pan or European type water closet (Anglo Indian W.C pan) with seat |
| 21 | white glazed earthen ware (Indian Type) W.C Pan SIO mm dia |
| 22 | Providing and fixing wash basin with C.I. Brakckets, 15mm C.P. Brass pillar taps, 32mm C.P. Brass waste pipe of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require |
| 23 | Providing laying and jointing glazed stoneware pipes class SPI with stiff mixture of cement mortar in the |
| 24 | Painting letters upto 2.5cm size complete including supply of all items, labour and material and T&P etc. |
| 25 | Add 18 % G.S.T. Please Enable Macros to View BoQ information |
