|
| 1 | Earth work in excavation by mechanical means (Hydraulic excavator)/ manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m, as directed by Engineer-in-charge.All kinds of soil |
| 2 | Supplying and filling in plinth with sand under floors, including watering, ramming, consolidating and dressing complete. |
| 3 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :1:2:4 (1cement : 2 coarse sand (zone-Ill) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources) |
| 4 | Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources). |
| 5 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level. Mild steel and Medium Tensile steel bars |
| 6 | Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in:Cement mortar 1:6 (1 cement : 6 coarse sand) |
| 7 | Providing and fixing 1st quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3(1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. |
| 8 | Providing and fixing aluminium sliding door bolts, ISI marked anodised (anodic coating not less than grade AC 10 as per IS: 1868), transparent or dyed to required colour or shade, with nuts and screws etc. complete :250x16 mm |
| 9 | Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete ::150x10 mm |
| 10 | Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete.Hot finished welded type tubes |
| 11 | Tile work in skirting, risers of steps and dado up to 2 m height over 12 mm thick bed of cement mortar 1:3 (1 cement :3 coarse sand) and jointed with grey cement slurry @ 3.3 kg/sqm, including pointing in white cement mixed with pigment of matching shade complete. 11.22.1 Marble tiles (polished) Raj Nagar |
| 12 | Providing andlayingCeramic glazed floor tiles of size 300x300mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement :4 Coarse sand), Jointing with grey cement slurry @ 3.3 kg/sqm including pointing the joints with white cement and matching pigment etc., complete. |
| 13 | Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-incharge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. |
| 14 | 12 mm cement plaster of mix : 1:6 (1 cement: 6 fine sand) |
| 15 | 15 mm cement plaster: 1:4 (1 cement : 4 fine sand) |
| 16 | Neat cement punning |
| 17 | Distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gram/litre, of approved manufacturer and of required shade and colour all complete to achieve even shade and colourNew work (two or more coats) over and including water thinnable priming coat with cement primer having VOC content less than50 gram/litre |
| 18 | Finishing walls with Acrylic Smooth exterior paint of required shade : New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm). |
| 19 | Painting on G.S. sheet with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade ::Old work (one or more coats) |
| 20 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :One or more coats on old work |
| 21 | Cleaning and desilting of gully trap chamber, including removal of rubbish mixed with earth etc. and disposal of same, all as per the direction of Engineer-in-charge. |
| 22 | Providing & fixing White vitreous china water closet squatting pan (Indian type) along with“S” or “P” trap including dismantling of old WC seat and “S” or “P” trap at site complete with all operations including all necessary materials, labour and disposal of dismantled material including malba, all complete as per the direction of Engineer-in charge. Orissa pattern W.C Pan of size 580x440 mm |
| 23 | Taking out existing wooden door shutter, repair by cutting, painting etc. and refixing of repaired door shutters to existing door frames, including replacement of hinges with screws, etc. as required, all complete as per the direction of the Engineer-in-charge. |
| 24 | Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge. |
| 25 | Dismantling roofing including ridges, hips, valleys and gutters etc., and stacking the material within 50 metres lead of G.S. Sheet |
| 26 | Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead. |
| 27 | Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require: White Vitreous China Wash basin size 630x450 mm with a pair of 15 mm C.P. brass pillar taps |
| 28 | Providing and fixing P.V.C. low level flushing cistern with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete. 10 litre capacity - White |
| 29 | Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour : 600 mm long towel rail with total length of 645 mm, width 78 mm and effective height of 88 mm, weighing not less than 190 gms. |
| 30 | ProvidingandfixingChlorinatedPolyvinylChloride(CPVC)pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings and fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc.: 15 mm nominal dia Pipes |
| 31 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. External work: 25 mm nominal dia Pipes |
| 32 | Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete : 15 mm nominal bore |
| 33 | Providing and fixing C.P. brass shower rose with 15 or 20 mm inlet : 150 mm diameter |
| 34 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. |
| 35 | Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931 :15 mm nominal bore |
| 36 | Providing and fixing C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms.: 15mm nominal bore |
| 37 | Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931: 15mm nominal bore |
| 38 | Providing and fixing PTMT grating of approved quality and colour. Circular Type: 100 mm nominal dia |
| 39 | Providing and fixing PTMT soap Dish Holder having length of 138mm, breadth 102mm, height of 75mm with concealed fitting arrangements, weighing not less than 106 gms. |
| 40 | Providing and fixing unplasticised P.V.C. connection pipe with PTMT Nuts, collar and bush of approved quality and colour.: 15 mm nominal bore with 45 cm length |
| 41 | Add GST Modifed factor @.973 in total amount from Srl. No- 01 to 40 |
| 42 | Add cost index @ 27.10% from Srl No-01 to 53 |
| 43 | Providing and laying UPVC single socketed SWR pipes type-B for sewerage line conforming to IS code-13592, including all fittings. This includes jointing of pipes & fitting with rubber ring & testing of joints complete as per direction of Engineer-in-charge. External work. 100 mm nominal inner dia pipes. |
| 44 | Cleaning of septic tank sludge and disposal of sludge to the dumping site of municipal corporation Bandipur site by transporting safe and eco-friendly vehicle as per the policy of municipal corporation and the local authorities and as per the direction of engineer in charge. |
| 45 | Wiring for light pt/ fan pt/ Ex-fan pt/ call bell point with 1.5 sq mm FRLSPVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit , with modular switch, modular plate suitable size GI box and earthing the point with 1.5 sq mm FRLSPVC insulated copper conductor single core cableas required (Group- B). |
| 46 | Wiring for circuit / sub main wiring along with earth wire with the following sizeof FRLSPVC insulated copper conductor, single core cable in surface / recessed medium class PVCconduitas required. 2x2.5 Sq mm + 1x2.5 Sq mm earth wire. |
| 47 | Wiring for circuit / sub main wiring along with earth wire with the following sizeof FRLSPVC insulated copper conductor, single core cable in surface / recessed medium class PVCconduitas required. 2x4 Sq mm + 1x4 Sq mm earth wire. |
| 48 | S/F suitable size GI box with modular plate and cover in front on surface or in recess , including P/F 6 pin 5/6 & 15/16 amps modular socket out let and 15/16 amps modular switch ,connections Etc. as required. |
| 49 | Supplying and fixing 6 Way double door Single pole and neutral sheet steel MCB DB 240 Volts on surface/recess complete with tinned copper bus bar, neutral bus bar , earth bar , din bar, interconnection, powder painted including earthing etc as required. ( But without MCB / RCCB / ISOLATOR ) . |
| 50 | S/F 5 Amp to 32 Amp rating , 240/415 VOLTS \" C \" curve , MCB suitable for inductive load of single poles in the existing MCB DB complete with connection , testing and commissioning etc as reqd . |
| 51 | S/F 63 Amp rating , double pole 240 V, Isolator in the existing MCB DB complete with connection , testing and commissioning etc as reqd . |
| 52 | Earthing with GI earth pipe 4.5mtr long , 40mm dia including accessories and providing masonary enclosure with cover plate having locking arrangements and watering pipe etc.with charcoal / coke and salt as reqd. |
| 53 | Providing and laying earth connection from eath electrode with6 SWG dia GI wire in 15 mm dia GI pipe from earth electrode i/c connection with GI thimble excavation and re- filling as required . |
| 54 | Supplying and making end termination with brass compression gland and aluinium lugs for 2x25 sq mm (22 mm) size of PVC insulated and PVC sheathed / XLPE aluminium conductor,cable 0f 1.1 KV grade as required. |
| 55 | Supplying and fixing of light class G.I. pipe of 50 mm dia (nominal) 3 mtr length along the pole for protection of under ground cable etc as required. |
| 56 | Supplying and fixing 20 amps , 240V, SPN industrial type socket outlet with 2 pole and earth metal enclosed plug top alongwith 20 amps \"C\" curve SP MCB in sheet steel enclosure on surface or in recess metal cover for the socket outlet and complete with connection testing and commissioning etc as reqd . |
| 57 | Providing & fixing 32 mm dia x 2.0 mtr GI pipe( medium class ) bracket for mounting of flourescent / HPMV / HPSV street light fitting on pole including bending the pipe to the required shape, 2 nos. 40 mm x 3 mm flat iron clamps with nuts, bolts and washer, painting the flat iron with primerand finish paint etc. as required. |
| 58 | Add GST Difference @6.33% on DSR\"22 (Item Sr. No. 45 to 57) |
| 59 | Providing and laying of one number PVC insulated and PVC sheathed / XLPE power cableof 1.1 KV gradeof 2 x 25 sq mm armoured cable direct in ground including excavation , and refilling the trench etc as required, but excluding sand cushioning and protective covering ( Havells / Polycab / Standard / Plaza and equivalent make ). |
| 60 | Providing and laying of one number PVC insulated and PVC sheathed / XLPE power cableof 1.1 KV gradeof 2 x 25 sq mm armoured cable direct in the RCC / HUME / METAL as required.Conf. to IS: 7098 part - I of make Havells / Polycab / KEI / Plaza and equivalent make ). |
| 61 | SupplyingInstallation, testing and commissioning of20/22 watts LED batten 4\" long, basic all purpose surface and wall mounted LED batten with polycorbonate housing & integrated electronic driver complete with all accessories i.e connection with 3 x 1.5 sq.mm, FRLS PVC insulated copper conductor, single core cable and earthing etc. as required. Make : Phillips/ Crompton Greaves/ Havells etc. |
| 62 | SupplyingInstallation, testing and commissioning of10 watts Mirror light LED batten 2\" long, basic all purpose surface and wall mounted LED batten with polycorbonate housing & integrated electronic driver complete with all accessories i.e connection with 3 x 1.5 sq.mm, FRLS PVC insulated copper conductor, single core cable and earthing etc. as required. Make : Phillips/ Crompton Greaves/ Havells etc. |
| 63 | SupplyingInstallation, testing and commissioning of6 watts surface / recess, round / squareLEDwith electronic driver complete with all accessories i.e connection with 3 x 1.5 sq.mm, FRLS PVC insulated copper conductor, single core cable and earthing etc. as required. Make : Phillips/ Crompton Greaves/ Havells etc. |
| 64 | Supply installation testing and cmmissioning of 40/45 W LED street light fitting at 230 V , 50 HZ AC with high power LED , Pressure die cast aluminium IP66 protection along with electronic driver with 1.5 sq mm copper wire etc as reqd . MakeBajaj and equebalent make Havells / Philips/Crompton / Syska etc as required. |
| 65 | Supplying, Installation of 300 mm sweep exhaust fan with metal body and blades with metal louvers including making opening making good the damage, connection, testing , commissioning etc as required. Compatible to Havells Model no.Ventil Air DB Green or equivalent make of Usha/ Khaitan/ CG/ Orptat/ Orient/ Bajaj etc. |
| 66 | Providing, installation, testing and commissioning of 50 Ltrs Geyser 230 Volt 50 HZ, 2000 Watt with thermostarter autocut facilities on the wall with providing the connection pipe and makig proper connection with the existing water pipe etc as required with 2 years comprehensive warrantyMonza DX Make - Havellsand equivalent ( Bajaj / Crompton / Jaguar ISI marked 50 ltr capacity vertical mounting storage Geyser ).63A FP isolator - 1 no. |
| 67 | Providing and fixing of 63Amp 415 V double pole main switch complete with all accessories etc directly on wall includng connection as required make (Havells / L & T/ HPL). |
