|
| 1 | Demolishing of RCC by mechanical/manual means and stock piling at designated locations, chipping, etc. and disposing off all the debris outside the plant premises,stacking, serviceable and unserviceable material separately including cutting reinforcement, etc. complete as directed. |
| 2 | Demolishing brickwork masonary by mechanical/manual means including stacking of serviceable material disposing of all debris outside the plant premises at the risk and cost of the contractor and as directed by the Engineer. |
| 3 | Removal of doors, and windows (steel , guard bar or wooden) Area below3 sq.m. including cost of stacking,cutting, etc. at the risk and cost of the contractor and as directed by the Engineer. |
| 4 | Demolishing tile work in floor for 10mm to 25mm thick tiles laid in cement mortar and stacking the material within 50 M lead. |
| 5 | Dismantaling of old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish outside the plant premises. |
| 6 | Dismantling aluminium/ Gypsum/wooden partitions, doors, windows, fixed glazing and false ceiling including disposal of unserviceable material and stacking of serviceable material with in 50 meters lead as directed by Engineer-in-charge. |
| 7 | Excavation up to a depth not exceeding 1.5 meters in all types of soils, hard moorum, shalefrom original average ground level for raft, footing, equipment foundation, wall, column, trenches/drains, etc. including shoring, strutting, dewatering and refilling around them and in plinth with excavated selected soil in layers not exceeding 150mm thickness including watering, ramming, etc., all complete and disposing of all surplus materials up to a lead of 1.0 km as per drawing, specifications and as directed by the Engineer. |
| 8 | Supplying and filling in plinth coarse goma sand under floors including watering, ramming,consolidating and dressing etc. complete and as directed. |
| 9 | Providing and laying plain cement concrete (1:2:4) (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size) of approved quality in foundation, plinth, pavements, (plinth beams and under floor) including ramming, leveling, curing, form work wherever necessary etc. all complete as per drawings, specifications and as directed by the Engineer. |
| 10 | Providing and laying reinforced cement concrete of grade 1: 1.5 : 3( 1cement : 1.5 sand : 3 graded stone aggregate) with 20mm nominal size stone aggregate of approved qualityall complete at all levels as per drawings, specifications and as directed by the Engineer-in-charge but excludingcost of centering, shuttering and reinforcement . |
| 11 | Providing and fixing, centering and shuttering including strutting propping, etc. for RCC worksincluding removal of form workafter concreting for foundation footing base of Column, PCC, Plinth, beams, coping, slab, etc. complete as directed by the Engineer. |
| 12 | Providing,laying & fixing in position TMT bars of grade Fe 500 D or more for reinforcement at all levels, for RCC in situ work including cost of straightening, cutting, bending & binding with 16 gauge MS annealed binding wire, cement mortar spacer blocks, etc. all complete as per drawings, specifications and as directed by the Engineer. |
| 13 | Providing and laying brick masonry using burnt clay bricks of class designation 7.5 for walls/pillars/steps/trenches, etc. at all levels & in foundation and plinth with cement mortar 1:6 including cost of raking of joints, curing, including providing RCC band at indicated levels (RCC band will be paid separately), etc. all complete at all levels as per drawings, specifications and as directed by the Engineer. |
| 14 | Below Plinth level :- |
| 15 | Above Plinth level :- |
| 16 | Half brick masonry in partition walls with common burnt clay F.P.S.(Non-Modular) bricks of class desiganation 35 in superstructure above plinth level up to floor-V level in cement mortar 1:4 at all floors and levels scaffolding, raking out joints, curing, etc. complete all as per specifications & as directed by the EIC. |
| 17 | Providing and laying 15mm thick plaster in cement mortar 1:4 (1 cement : 4 fine sand) finished with a floating coat of neat cement inside surface proportion over brick masonry walls upto 15 mtr. height and concrete surfaces including raking of joints, hacking of concrete surfaces, curing, scaffolding, providing groovesetc. all complete as per drawings,specifications and as directed by the Engineer. |
| 18 | Providing and laying 6 mm thick plaster in cement mortar 1:3 (1 cement : 3 fine sand) finished with a floating coat of neat cement inside surface proportion over brick masonry walls upto 15 mtr. height and concrete surfaces including raking of joints, hacking of concrete surfaces, curing, scaffolding, providing groovesetc. all complete as per drawings,specifications and as directed by the Engineer. |
| 19 | Removing white or colour wash by scrapping and sand papering and preparing the surface smooth including removal of all existing layers of whitewash/distemper over cemented surface including necessary scaffolding etc and necessary repairs to scratches etc. complete as per specifications & as directed by the EIC. |
| 20 | Providng and applying white cement based putty of average thickness 1 mm, JK or equivalent of approved brand and manufacturer,over the plastered wall surface to prepare the surface even and smooth etc. complete as per directed by E.I.C. |
| 21 | Providing and applying one or more coat of water/oil or any suitable primer Cement base primer/Oil base primer on old surfaces for making suitable for applying next finishing coat of any type including surface preparation & filling of cracks, etc. complete and as directed by the Engineer. |
| 22 | Providing and applying two or more coats of premium acrylic emulsion of approved brand and manufacturer and of required shade having high washability and longer durability on walls, columns, ceiling, etc. (on new or old work) to give an even shade including removing loose scales, fungus, water marks, etc. filling of nail holes and depression with putty of J.K. or equivalent make wall putty repairs and preparing surfaces upto the height of 15 mtrs. including scaffolding, cleaning the splashes on doors, floors, etc. complete as per specifications and as directed by the Engineer. |
| 23 | Providing and fixing aluminiumwork for doors, window, Ventilators of fixed or sliding type both for glazing and wiremesh shutter with extruded built up standard tubular section/appropriate Z Section and other section of approved make confarming to IS-733 and IS-1285, fixed with rawlplugs and screw or with fixing clips or with expansion hold fasteners including filling of gaps at junctions at top, bottom and sides with weather silicon sealent, powder coated Aluminium sections (minium thickness of powder coating 50 Micron) of required shade ofincluding cost of a cleatangle on, S. S. Screws , aluminium snap beading and fitting of all types like tower bolt locking arrangement, handles, stoppers, etc.,complete and as directed by the Engineer. |
| 24 | Providing and fixing 5 mmthickness ( Wt. not less than 12.50 Kg/Sqm. ) of clear float/frosted/Bajara sheet glass/laminated particle boardto M/s. Triveni/Shree Vallabh/IAG/Modi guard/ Saint Gobin or other approved equivalent manufactuer and fixing with Aluminium frame work (door/window) including fixing beading and providing and fixing 2 way EDPM gasketing to ensure water and air tightness and neoprene cushions/gasket accommodated in grooves, necessary bronze anodised screws, etc, all complete generally as per drawings specifications and as directed by Engineer-in-Charge |
| 25 | Providing and laying vitrifed floor / dado tiles in size of tile 500 X 500 approx. (Thickness to be specified by the manufacturer ) water absorption less than 0.08 % and confirming to IS: 15622 of approved make,in all colours and shades, laid on 20 mm thick cement mortor 1:4 ( 1 cement : 4 coarse sand) jointing with grey cement slurry @ 3.3 Kg./Sqm. including skirting grouting the joints with white cement and matching pigments etc. complete and as directed by the Engineer. |
| 26 | Providing and fxing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut marble for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing of edges to give high gloss fnish etc. complete at all levels. |
| 27 | Providing and applying two or more coats of exterior emulsion of Premium Acrylic smooth exterior paint with silicon addetive of APEX of ASIAN or equivalent make of approved brand and manufacturer and of required shade applied @ 1.43 lit/10 Sqm.over and including priming coat of exterior primer applied @ 0.9 lit/10 Sqm to give an even shade; including cost of scaffoldings, etc. at all heights as per specifications and as directed by the Engineer.(In any case it will not be permitted to carry out the job without proper metallic scaffolding and platform at height more than 2.5 m) |
| 28 | Providing & fixing tiled false ceiling with new grid using 6mm thick Cement bonded designer particle board /Fiber Cement board like \"Bison\" Designer Board / \"V\" Board from Visaka or similar products from Everest/RAMCO or any reputed make with texture on one face of approved pattern conforming to IS 14862-2000 of size 595x595 mm finished with one coat of cement primer on both sides and edges and two coats of exterior emulsion paint of Asian or any reputed make on exposed face & edges, including providing and fixing interlocking metal grid of hot dipped galvanized steel sections (galvanized @ 120 grams per sqm, both side inclusive) consisting of main “T” runner with suitably spaced joints to get required length and of size 24x38 mm made from 0.30 mm thick (minimum) sheet, spaced 1200 mm c/c, and cross “T” of size 24x25 mm made out of 0.30 mm (Minimum) sheet, 1200 mm long spaced between main ’T’ at 600 mm c/c to form a grid of 1200x600 mm and secondary cross ‘T’ of length 600 mm and size 24 x25 mm made of 0.30 mm thick (Minimum) sheet to be interlocked at middle of the 1200x 600 mm panel to from grid of size 600x600 mm,resting on walls /partitions on a Perimeter wall angle precoated steel of size 24x24X3000 mm made of 0.30 mm thick (minimum) sheet with the help of rawl plugs at 450 mm c/c with 25 mm long dry wall screws including, cutting/ making opening for services like diffusers, grills, light fittings, smoke detectors etc., wherever required. Main ‘T’ runners to be suspended from ceiling using G.I. slotted cleats of size 27 x 37x 25 x1.6 mm fixed to ceiling with 12.5 mm dia and 50 mm long dash fasteners, 4 mm G.I. adjustable rods with galvanised steel level clips of size 85 x 30 x 0.8 mm, spaced at 1200 mm c/c along main ‘T’, bottom exposed with 24 mm of all Tsections shall be pre-painted with polyster baked paint, for all heights, drilling holes in the ceiling tiles for tuning hall accoustics as required as per the approved pattern and to the extent required, scaffolding etc all complete at all heights as per specifications, drawings and as directed by Engineer-in-charge. |
| 29 | Providing and fixing 110mm dia unplasticised PVC rain water pipes conforming to IS-13592 type A including seal rings as per IS-5382 leaving 10mm gap for thermal expansion, etc. complete as directed. |
| 30 | Providing and fixing on walls unplasticised PVC rain water pipes specials like bends, shoes, etc. suitable for 110mm dia PVC pipes as per IS-13592 type A, etc. complete as directed. |
| 31 | Bends |
| 32 | Shoes |
| 33 | Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan),W.C. pan with ISI marked white solid plastic seat and lid , 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with P or S trap, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required etc. complete as directed by EIC. |
| 34 | Providing and fixing 8 mm dia C.P. / S.S. Jet with flexible tube upto 1 metre long with S.S. triangular plate to Eureopean type W.C. of quality, &and make as approved by EIC. |
| 35 | Providing & fixing on Exposed or concealed surfaces the following dia. Chlorinated Polyvinyl Chloride (CPC) pipes,having thermal stabilty for hot & cold water supply,including all CPVC plain & brass threaded fittings,including fixing the pipe with clamps at 1.00m spacing. This includes jointing of pipes & fittings one step CPVC solvent cement and the cost of cutting such as Union, Niples, Bendes, Elbows, Tees, Reducers, End caps, Couplers, Adaptors, Saddles, Plugs, Tank connectors, Expansion loops, Bypass bends, etc. CPVC Pipes and fittings of Supreme make (Mode measurement: - The measurement shall per Unit RM length of pipe line laid or fixed. The measurement shall be taken along centre line of pipe. No measurement shall be recorded separately for fittings, etc.) |
| 36 | 15 mm n.b. ( Concealed work) |
| 37 | 20 mm n.b.( Concealed work) |
| 38 | 25 mm n.b.( Concealed work) |
| 39 | Providing and fixing in position heavy pattern screw down gun metal Gate Valve conforming to I.S. 778 with hand wheels at top including testing for 10 Kg./Sq.Cm. Pressure with clean and portable water with a minimum testing duration of two hours, etc. including removing gun metal Gate valve & returning to Dept. Stores, etc. as per specifications and as directed by the Engineer-in-Charge. |
| 40 | 15 mm NB |
| 41 | 20 mm NB |
| 42 | 25 mm NB |
| 43 | Providing, laying, jointing salt glazed stoneware pipes of class SP-1 with stiff mixure of CM in propotion of ( 1 cement : 1 fine sand) laid to proper grade, level for drainage with joints made with CM (1:1) including testing, curing, etc. complete as directed. |
| 44 | 100mm dia |
| 45 | 150mm dia |
| 46 | Providing and fixing square month stoneware gully trap of grade `A\" with 300 x 300mm (inside) size brick masonry chamber with C.I. Cover and frame of total wt. Of 7.20 Kg. As per standard design etc. complete with 150 x 100mm size `P\" type with sewer bricks confirming to IS 4885. |
| 47 | Making connection of new drainage line with existing manhole including breaking and making good the wall, floors with CC 1:2:4 with cement plaster on both side in CM (1:3) finished with a floating coat of neat cement and making necessary channels for drain, etc. for pipes of 100mm to 250mm dia. |
| 48 | Providing and fixing 100mm dia inlet and outlet PVC Nahani trap/floor trap of self cleaning design with hinged PVC grating on top including cutting of floor concrete, setting the trap in concrete, etc. as directed. |
| 49 | Water Storage Tank :- Providing and fixing on Terrace PVC circular water storage tank of 2000Liter and 1000 Liter capacity SINTEX or equivalant approved make of IS : 12701 marked, mounted on a platform of roof slab including PVC cover, inlet, outlet, overflow and drainage connection including testing, etc. all complete as per drawings,specifications and as per direction of Engineer-In-Charge. |
| 50 | Providing & fixing approved WHITE Orissa pattern W.C. comprising of Orissa pattern W.C. similar to M/s. Cera Sanitary make model no 2071 or equivalent makewith \"P\" or \"S\" trap in white glazed viterous china ware of size 580 mm x 440 mm conformig to IS 7231, includingthe 10 Litr low level white P.V.C. flushing cistenM/s. Cera Sanitary make model no 2602P \"Ciena Premium\" or equivalent make including the cost of flush pipe removing the existing damaged/broken and making good the surrounding with cement mortar/concrete to the existing finish & disposing of debris out side colony etc. complete all as per specifications and as directed by the EIC. |
| 51 | Providing & fixing Wash basin size 550mm x 400mm (Approx. Size) approved quality wash basin similar to CRYSTAL model of M/s. Cera Sanitary ware or other approved equivalent in white glazed viterous chinaware supported on suitable wall brackets and of size mentioned below, including cost of removing the existing wash basin and fittings such as piller cock, inlet connection, stop cock, waste coupling, bottle trap, etc. depositing serviceable material at dept. store & disposing of debris out side colony, etc., complete all as per specifications and as directed by the Engineer-in-Charge. |
| 52 | Providing and fixing white vitreous china pedestal for wash basin completely recessed at the back for the reception of pipes and fittings. |
| 53 | Providing and fixing range of two half stall urinals with 5 litre P.V.C.automatic flushing cistern white vitreous china flat back half stall urinal of size 580x380x350 mm with white PVC automatic flushing cistern, with fittings, standard size C.P. brass flush pipe, spreaders with unions and clamps (all in C.P. brass) with waste fitting as per IS : 2556, C.I. trap with outlet grating and other couplings in C.P. brass,including painting of fittings and cutting and making good the walls and floors wherever required : |
| 54 | Providing and fixing aluminium extruded section body tubular type universal hydraulic door closer (having brand logo with ISi, IS : 3564, embossed on the body, door weight upto 36 kg to 80 kg and door width from 701 mm to 1000 mm), with double speed adjustment with necessary accessories and screws etc. complete. |
| 55 | Providing and fixing 30 mm thick plain PVC door shutters , factory made panel PVC door shutter consisting of frame made out of M.S. tubes of 19 gauge thickness and size of 19 mm x 19 mm for styles and 15x15 mm for top & bottom rails. M.S. frame shall have a coat of steel primers of approved make and manufacture. M.S. frame covered with 5 mm thick heat moulded PVC \"C\" channel of size 30 mm thickness, 70 mm width out of which 50 mm shall be flat and 20 mm shall be tapered in 45 degree angle on both side forming styles and 5 mm thick, 95 mm wide PVC sheet out of which 75mm shall be flat and 20 mm shall be tapered in 45 degree on the inner side to form top and bottom rail and 115 mm wide PVC sheet out of which 75 mm shall be flat and 20 mm shall be tapered on both sides to form lock rail. Top, bottom and lock rails shall be provided both side of the panel. 10 mm (5mm x 2 ) thick, 20 mm wide cross PVC sheet be provided as gap insert for top rail & bottom rail, paneling of 5 mm thick both side PVC sheet to be fitted in the M.S. frame welded/ sealed to the styles & rails with 7 mm (5 mm+2 mm) thick x 15 mm wide PVC sheet beading on inner side, and joined together with solvent cement adhesive. An additional 5 mm thick PVC strip of 20 mm width is to be stuck on the interior side of the \"C\" Channel using PVC solvent adhesive etc. complete as per direction of Engineer-in-charge, manufacturer\"s specification & drawing. |
| 56 | Providing and fixing PTMT liquid soap container 109 mm wide, 125 mm high and 112 mm distance from wall of standard shape with bracket of the same materials with snap fittings of approved quality and colour, weighing not less than 105 gms. |
| 57 | Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete. |
